Sei sulla pagina 1di 32

Limit state capacity tables

Double lapped spans


Double lapped spans

Span (mm)

Lap

Span (mm)

Overall purlin length =

33

zeds & cees


purlins & girts

span + 70 mm + (Lap/2)

Limit state capacity tables


Double lapped spans
Double lapped spans

Lap

Span (mm)

Span (mm)
Overall purlin length =
span + 70 mm + (Lap/2)

Double lapped span: Z1)5019 (kN/m


IN
Bridging >

T
2, 3

OU
1

Load for
deflect'n
span/150

Double lapped span: Z1)502 (kN/m


IN

T
2, 3

OU
1

Span 2400 20.06


20.06
20.06
20.06
20.06
20.06
20.06
41.39
21.18
21.18
21.18
21.18
21.18
21.18
21.18
(mm) 2700 15.80
16.03
16.03
16.03
16.03
16.03
16.03
28.73
18.88
18.88
18.88
18.88
18.88
18.88
18.88
3000 12.63
13.12
13.12
13.12
13.12
13.12
13.12
20.70
17.03
17.03
17.03
17.03
17.03
17.03
17.03
10.94
10.94
10.94
10.94
10.94
10.94
15.38
13.92
15.42
15.42
15.42
15.42
15.42
15.42
3300 10.31
3600 8.58
9.27
9.27
9.27
9.27
9.27
9.27
11.72
11.49
13.06
13.06
13.06
13.06
13.06
13.06
3900 4.75
7.55
7.55
6.84
7.55
7.55
7.55
9.13
5.66
10.64
10.64
9.48
10.64
10.64
10.64
4200 3.93
6.22
6.22
5.46
6.22
6.22
6.22
7.25
4.67
8.77
8.77
7.53
8.77
8.77
8.77
4500 3.30
5.22
5.22
4.42
5.22
5.22
5.22
5.84
3.92
7.36
7.36
6.08
7.36
7.36
7.36
4800 2.80
4.44
4.44
3.59
4.44
4.44
4.44
4.78
3.33
6.26
6.26
4.93
6.26
6.26
6.26
2.95
3.83
3.83
3.83
3.96
2.86
5.40
5.40
3.99
5.40
5.40
5.40
5100 2.41
3.83
3.83
5400 2.09
3.34
3.34
2.42
3.32
3.34
3.34
3.31
2.48
4.69
4.70
3.27
4.70
4.70
4.70
5700 1.83
2.93
2.93
2.01
2.85
2.93
2.93
2.80
2.17
4.08
4.13
2.71
4.05
4.13
4.13
6000 1.61
2.58
2.60
1.69
2.47
2.60
2.60
2.39
1.92
3.57
3.66
2.27
3.49
3.66
3.66
6300 1.43
2.29
2.32
1.44
2.16
2.32
2.32
2.05
1.70
3.16
3.26
1.91
3.04
3.26
3.26
6600 1.28
2.04
2.08
1.23
1.89
2.08
2.08
1.78
1.52
2.81
2.93
1.63
2.65
2.93
2.93
6900 1.14
1.83
1.88
1.05
1.67
1.88
1.88
1.56
1.36
2.51
2.65
1.40
2.33
2.65
2.65
2.40
2.40
7200 1.03
1.64
1.70
0.91
1.48
1.70
1.70
1.38
1.23
2.26
2.40
1.21
2.06
7500 0.93
1.49
1.55
0.79
1.31
1.55
1.55
1.22
1.11
2.04
2.19
1.05
1.83
2.19
2.19
7800 0.85
1.35
1.42
0.69
1.16
1.39
1.42
1.09
1.01
1.85
2.00
0.92
1.62
1.98
2.00
8100 0.77
1.23
1.31
0.60
1.03
1.26
1.31
0.98
0.92
1.68
1.84
0.81
1.44
1.79
1.84
8400 0.70
1.13
1.20
0.53
0.92
1.14
1.20
0.88
0.84
1.54
1.70
0.72
1.27
1.61
1.70
8700 0.64
1.03
1.11
0.47
0.81
1.04
1.11
0.80
0.77
1.41
1.57
0.64
1.12
1.46
1.57
9000 0.59
0.95
1.03
0.42
0.72
0.94
1.03
0.72
0.71
1.29
1.46
0.57
1.00
1.33
1.46
9300 0.55
0.92
1.03
0.67
0.91
1.02
0.67
0.66
1.24
1.45
0.53
0.91
1.27
1.45
1.14
1.35
0.48
0.82
1.16
1.34
9600 0.51
0.85
0.96
0.60
0.83
0.94
0.61
0.61
9900 0.47
0.78
0.89
0.54
0.76
0.86
0.56
0.57
1.06
1.26
0.43
0.73
1.06
1.23
10200 0.43
0.73
0.83
0.49
0.69
0.80
0.51
0.53
0.98
1.17
0.66
0.97
1.13
10500 0.40
0.67
0.77
0.44
0.63
0.73
0.46
0.49
0.91
1.08
0.60
0.88
1.04
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL150.2

Load for
deflect'n
span/150

55.20
38.31
27.61
20.51
15.64
12.18
9.66
7.79
6.37
5.28
4.42
3.73
3.18
2.74
2.37
2.07
1.82
1.61
1.43
1.28
1.15
1.04
0.94
0.87
0.79
0.72
0.65
0.60

zeds & cees


purlins & girts
34

Limit state capacity tables


Double lapped spans
Double lapped spans

Span (mm)

Lap

Span (mm)

Overall purlin length =

35

zeds & cees


purlins & girts

span + 70 mm + (Lap/2)

Limit state capacity tables


Double lapped spans
Double lapped spans

Lap

Span (mm)

Span (mm)
Overall purlin length =
span + 70 mm + (Lap/2)

Double lapped span: Z2)0019 (kN/m


IN
Bridging >

OU

Double lapped span: Z2)002 (kN/m


IN

OU

2,3

Load for
deflect'n
span/150

2,3

Load for
deflect'n
span/150

17.00
14.16
11.94
10.18
8.77
7.61
6.51
5.61
4.88
4.29
3.80
3.39
3.05
2.75
2.50
2.28
2.08
1.91
1.76
1.63
1.51
1.48
1.37
1.26
1.17
1.09
1.01
0.94
0.88

17.00
14.16
11.94
10.18
8.77
7.61
6.51
5.61
4.88
4.29
3.80
3.39
3.05
2.75
2.50
2.28
2.08
1.91
1.76
1.63
1.51
1.51
1.40
1.31
1.22
1.15
1.08
1.01
0.95

17.00
14.16
11.94
10.18
8.77
7.61
6.39
5.31
4.45
3.70
3.02
2.58
2.22
1.93
1.68
1.48
1.30
1.16
1.02
0.90
0.80
0.74
0.67
0.60
0.54
0.49
0.44
0.40

17.00
14.16
11.94
10.18
8.77
7.61
6.51
5.61
4.88
4.29
3.80
3.39
3.05
2.75
2.50
2.28
2.07
1.86
1.67
1.50
1.35
1.21
1.09
0.99
0.90
0.82
0.75
0.68
0.63

17.00
14.16
11.94
10.18
8.77
7.61
6.51
5.61
4.88
4.29
3.80
3.39
3.05
2.75
2.50
2.28
2.08
1.91
1.76
1.63
1.51
1.51
1.40
1.31
1.22
1.13
1.04
0.96
0.89

17.00
14.16
11.94
10.18
8.77
7.61
6.51
5.61
4.88
4.29
3.80
3.39
3.05
2.75
2.50
2.28
2.08
1.91
1.76
1.63
1.51
1.51
1.40
1.31
1.22
1.15
1.08
1.01
0.95

44.69
33.21
25.31
19.72
15.65
12.62
10.32
8.54
7.15
6.05
5.16
4.43
3.84
3.34
2.93
2.58
2.29
2.04
1.82
1.63
1.48
1.37
1.25
1.14
1.04
0.96
0.88
0.81
0.75

17.03
15.51
14.25
8.88
7.24
6.01
5.06
4.32
3.73
3.25
2.85
2.52
2.25
2.01
1.81
1.64
1.49
1.35
1.24
1.14
1.05
0.97
0.90
0.83
0.78
0.72
0.67
0.63
0.59

17.03
15.51
14.25
13.18
12.25
11.12
9.46
8.15
7.10
6.24
5.53
4.90
4.36
3.90
3.51
3.17
2.88
2.63
2.40
2.21
2.03
1.96
1.81
1.68
1.56
1.45
1.35
1.26
1.17

17.03
15.51
14.25
13.18
12.25
11.12
9.46
8.15
7.10
6.24
5.53
4.93
4.43
4.00
3.63
3.31
3.03
2.78
2.57
2.37
2.20
2.19
2.04
1.90
1.78
1.67
1.57
1.47
1.39

17.03
15.51
14.25
13.18
12.25
10.51
8.70
7.28
6.16
5.19
4.38
3.71
3.17
2.73
2.37
2.07
1.80
1.57
1.39
1.22
1.09
1.00
0.89
0.80
0.72
0.65
0.59
0.54
0.49

17.03
15.51
14.25
13.18
12.25
11.12
9.46
8.15
7.10
6.24
5.53
4.93
4.43
3.96
3.53
3.15
2.83
2.55
2.31
2.09
1.90
1.79
1.60
1.44
1.30
1.18
1.07
0.98
0.89

17.03
15.51
14.25
13.18
12.25
11.12
9.46
8.15
7.10
6.24
5.53
4.93
4.43
4.00
3.63
3.31
3.03
2.78
2.57
2.37
2.20
2.17
1.99
1.83
1.68
1.56
1.44
1.33
1.24

17.03
15.51
14.25
13.18
12.25
11.12
9.46
8.15
7.10
6.24
5.53
4.93
4.43
4.00
3.63
3.31
3.03
2.78
2.57
2.37
2.20
2.19
2.04
1.90
1.78
1.67
1.57
1.47
1.39

59.02
43.85
33.42
26.04
20.66
16.66
13.63
11.28
9.44
7.98
6.81
5.85
5.06
4.41
3.87
3.41
3.02
2.69
2.40
2.16
1.96
1.82
1.66
1.52
1.39
1.28
1.18
1.09
1.01

0.46
0.82
0.90
0.58
0.82
0.90
0.69
0.55
1.09
1.31
0.45
0.82
1.15
1.30
0.43
0.77
0.85
0.53
0.75
0.85
0.64
0.52
1.02
1.23
0.41
0.75
1.07
1.21
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

0.94
0.87

Span 3000 17.00


(mm) 3300 14.16
3600 11.94
3900 7.09
4200 5.82
4500 4.86
4800 4.12
5100 3.53
5400 3.06
5700 2.67
6000 2.36
6300 2.09
6600 1.87
6900 1.67
7200 1.51
7500 1.37
7800 1.24
8100 1.13
8400 1.04
8700 0.95
9000 0.87
9300 0.82
9600 0.75
9900 0.70
10200 0.65
10500 0.60
10800 0.56
11100 0.52
11400 0.49

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700
12000

DL200.2

zeds & cees


purlins & girts
36

Limit state capacity tables


Double lapped spans
Double lapped spans

Lap

Span (mm)

Span (mm)
Overall purlin length =
span + 70 mm + (Lap/2)

Double lapped span: Z2)5019 (kN/m


Bridging >

Span 3000 15.13


(mm) 3300 13.00
3600 11.28
3900 9.11
4200 7.47
4500 6.23
4800 5.27
5100 4.51
5400 3.91
5700 3.41
6000 3.00
6300 2.66
6600 2.37
6900 2.12
7200 1.91
7500 1.72
7800 1.56
8100 1.42
8400 1.30
8700 1.19
9000 1.10
9300 1.02
9600 0.95
9900 0.88
10200 0.81
10500 0.76
10800 0.70
11100 0.66
11400 0.61

2, 3

Load for
deflect'n
span/150

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
5.07
4.61
4.20
3.85
3.49
3.17
2.89
2.64
2.43
2.24
2.07
1.92
1.92
1.78
1.66
1.55
1.44
1.34
1.24
1.15

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
5.07
4.61
4.20
3.85
3.49
3.17
2.89
2.64
2.43
2.24
2.07
1.92
1.92
1.78
1.66
1.55
1.46
1.37
1.29
1.21

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
4.90
4.00
3.41
2.93
2.53
2.20
1.93
1.70
1.50
1.31
1.16
1.03
0.95
0.85
0.76
0.69
0.62
0.56
0.50
0.46

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
5.07
4.61
4.20
3.85
3.49
3.17
2.89
2.64
2.43
2.23
2.00
1.78
1.60
1.44
1.30
1.18
1.07
0.98
0.89
0.82

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
5.07
4.61
4.20
3.85
3.49
3.17
2.89
2.64
2.43
2.24
2.07
1.92
1.92
1.78
1.66
1.55
1.46
1.37
1.29
1.19

15.13
13.00
11.28
9.88
8.72
7.74
6.91
6.20
5.59
5.07
4.61
4.20
3.85
3.49
3.17
2.89
2.64
2.43
2.24
2.07
1.92
1.92
1.78
1.66
1.55
1.46
1.37
1.29
1.21

72.59
53.93
41.11
32.02
25.41
20.49
16.76
13.88
11.61
9.82
8.37
7.20
6.23
5.43
4.76
4.19
3.72
3.31
2.96
2.65
2.39
2.22
2.01
1.83
1.66
1.52
1.40
1.28
1.18

IN

OU

Double lapped span: Z2)502 (kN/m

2, 3

Load for
deflect'n
span/150

17.03
15.51
14.25
11.10
9.04
7.49
6.30
5.37
4.63
4.03
3.53
3.12
2.78
2.49
2.24
2.02
1.83
1.67
1.53
1.40
1.29
1.20
1.11
1.02
0.95
0.88
0.82
0.77
0.72

17.03
15.51
14.25
13.18
12.25
11.45
10.75
10.13
9.06
8.00
7.09
6.32
5.68
5.13
4.65
4.22
3.82
3.48
3.18
2.92
2.68
2.58
2.38
2.19
2.03
1.88
1.74
1.62
1.51

17.03
15.51
14.25
13.18
12.25
11.45
10.75
10.13
9.06
8.00
7.09
6.32
5.68
5.13
4.65
4.24
3.88
3.57
3.29
3.04
2.82
2.81
2.62
2.44
2.28
2.14
2.01
1.89
1.78

17.03
15.51
14.25
13.18
12.25
11.45
10.75
9.70
8.12
6.82
5.71
4.82
4.11
3.53
3.06
2.65
2.30
2.01
1.76
1.56
1.38
1.26
1.12
1.01
0.90
0.81
0.74
0.67
0.61

17.03
15.51
14.25
13.18
12.25
11.45
10.75
10.13
9.06
8.00
7.09
6.32
5.68
5.13
4.65
4.22
3.78
3.40
3.07
2.77
2.49
2.33
2.08
1.87
1.68
1.52
1.38
1.26
1.15

17.03
15.51
14.25
13.18
12.25
11.45
10.75
10.13
9.06
8.00
7.09
6.32
5.68
5.13
4.65
4.24
3.88
3.57
3.29
3.04
2.82
2.81
2.62
2.44
2.25
2.08
1.92
1.77
1.64

17.03
15.51
14.25
13.18
12.25
11.45
10.75
10.13
9.06
8.00
7.09
6.32
5.68
5.13
4.65
4.24
3.88
3.57
3.29
3.04
2.82
2.81
2.62
2.44
2.28
2.14
2.01
1.89
1.78

100.20
74.38
56.70
44.17
35.05
28.26
23.11
19.14
16.02
13.54
11.55
9.93
8.59
7.49
6.56
5.78
5.12
4.56
4.08
3.66
3.30
3.05
2.77
2.52
2.30
2.10
1.92
1.78
1.64

IN

OU

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700
12000

0.57
1.07
1.14
0.41
0.75
1.09
1.14
1.10
0.67
1.41
1.68
0.55
1.05
1.52
1.68
0.54
1.00
1.08
0.69
1.00
1.08
1.03
0.63
1.31
1.59
0.51
0.95
1.40
1.59
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

1.52
1.42

37

zeds & cees


purlins & girts

DL250

Limit state capacity tables


Double lapped spans
Double lapped spans

Lap

Span (mm)

Span (mm)
Overall purlin length =
span + 70 mm + (Lap/2)

Double lapped span: Z3)0024 (kN/m


IN

OU

Bridging >

2, 3

0-0

Load for
deflect'n
span/150

Span 6000
(mm) 6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800
11100
11400

5.26
4.61
4.06
3.61
3.23
2.90
2.62
2.38
2.17
1.98
1.82
1.69
1.56
1.44
1.34
1.24
1.16
1.08
1.01

8.51
7.80
7.17
6.61
6.12
5.67
5.27
4.90
4.51
4.18
3.87
3.86
3.55
3.28
3.03
2.81
2.62
2.44
2.27

8.51
7.80
7.17
6.61
6.12
5.67
5.27
4.90
4.51
4.18
3.87
3.86
3.59
3.35
3.13
2.93
2.75
2.59
2.44

8.51
7.80
7.17
6.59
5.72
4.99
4.37
3.80
3.39
3.04
2.73
2.58
2.31
2.08
1.88
1.70
1.53
1.39
1.26

8.51
7.80
7.17
6.61
6.12
5.67
5.27
4.90
4.51
4.18
3.87
3.86
3.59
3.35
3.10
2.85
2.62
2.41
2.20

8.51
7.80
7.17
6.61
6.12
5.67
5.27
4.90
4.51
4.18
3.87
3.86
3.59
3.35
3.13
2.93
2.75
2.59
2.44

8.51
7.80
7.17
6.61
6.12
5.67
5.27
4.90
4.51
4.18
3.87
3.86
3.59
3.35
3.13
2.93
2.75
2.59
2.44

19.16
16.47
14.26
12.42
10.89
9.60
8.50
7.57
6.77
6.07
5.47
5.07
4.59
4.18
3.81
3.48
3.19
2.93
2.70

11700
12000
12300
12600
12900
13200
13500
13800
14100
14400
14700
15000
15300
15600
15900
16200
16500
16800
17100
17400
17700

0.95
0.89
0.85
0.80
0.75
0.71
0.67
0.64
0.60
0.57
0.54
0.52
0.49
0.47
0.45
0.43
0.41

2.12
1.98
1.91
1.79
1.68
1.57
1.45
1.37
1.30
1.22
1.16
1.10
1.04
0.99
0.94
0.90
0.85
0.81
0.78
0.74
0.71

2.30
2.18
2.30
2.17
2.06
1.95
1.85
1.76
1.68
1.60
1.52
1.46
1.39
1.33
1.28
1.22
1.18
1.13
1.09
1.04
1.00

1.15
1.05
1.00
0.91
0.84
0.77
0.71
0.65
0.60
0.56
0.52
0.48
0.45
0.42

2.02
1.85
1.78
1.64
1.52
1.41
1.31
1.22
1.14
1.07
1.00
0.93
0.87
0.81
0.76
0.71
0.66
0.62
0.58
0.54
0.51

Double lapped span: Z3)003 (kN/m


IN

OU
3

Load for
deflect'n
span/150

6.18
5.40
4.75
4.21
3.75
3.37
3.03
2.75
2.50
2.29
2.10
1.94
1.79
1.66
1.54
1.43
1.33
1.25
1.17

13.28
12.05
10.98
10.04
9.11
8.30
7.54
6.86
6.26
5.74
5.27
5.10
4.71
4.35
4.03
3.75
3.48
3.23
3.01

13.28
12.05
10.98
10.04
9.11
8.30
7.60
6.98
6.44
5.95
5.52
5.51
5.12
4.78
4.47
4.18
3.93
3.69
3.48

13.28
12.05
10.98
10.04
9.11
8.30
7.60
6.98
6.44
5.95
5.52
5.51
5.12
4.78
4.47
4.18
3.93
3.69
3.48

13.28
11.73
10.29
9.08
8.00
7.01
6.15
5.44
4.78
4.22
3.74
3.43
3.06
2.73
2.45
2.21
2.00
1.81
1.64

13.28
12.05
10.98
10.04
9.11
8.30
7.60
6.98
6.44
5.95
5.52
5.45
5.00
4.59
4.23
3.91
3.61
3.35
3.10

13.28
12.05
10.98
10.04
9.11
8.30
7.60
6.98
6.44
5.95
5.52
5.51
5.12
4.78
4.47
4.18
3.93
3.69
3.48

13.28
12.05
10.98
10.04
9.1 1
8.3 0
7.6 0
6.9 8
6.4 4
5.9 5
5.5 2
5.5 1
5.1 2
4.7 8
4.47
4.18
3.93
3.69
3.48

25.57
21.97
19.02
16.58
14.53
12.81
11.35
10.10
9.03
8.10
7.30
6.76
6.13
5.57
5.08
4.65
4.26
3.91
3.61

3.29
3.11
3.27
3.10
2.93
2.78
2.64
2.51
2.39
2.28
2.17
2.08
1.98
1.90
1.82
1.75
1.68
1.61
1.55
1.49
1.43

1.50
1.37
1.31
1.20
1.10
1.01
0.93
0.86
0.80
0.74
0.69
0.64
0.60
0.56
0.52
0.49
0.46
0.43
0.41

2.86
2.63
2.57
2.36
2.17
1.99
1.84
1.69
1.57
1.45
1.34
1.25
1.16
1.08
1.01
0.94
0.88
0.82
0.77
0.72
0.68

3.29
3.11
3.25
3.04
2.85
2.67
2.51
2.36
2.22
2.09
1.97
1.86
1.75
1.65
1.55
1.45
1.37
1.29
1.21
1.14
1.07

3.29
3.11
3.27
3.10
2.93
2.78
2.64
2.51
2.39
2.28
2.17
2.08
1.98
1.89
1.80
1.71
1.62
1.55
1.47
1.40
1.34

3.33
3.08
2.96
2.75
2.55
2.38
2.23
2.09
1.97
1.85
1.75
1.65
1.56
1.48
1.40
1.33
1.26
1.20
1.14
1.08
1.03

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

zeds & cees


purlins & girts

2.30
2.18
2.30
2.17
2.06
1.95
1.83
1.72
1.61
1.51
1.41
1.32
1.23
1.16
1.08
1.02
0.95
0.88
0.83
0.79
0.75

2.30
2.18
2.30
2.17
2.06
1.95
1.85
1.76
1.68
1.60
1.52
1.46
1.39
1.33
1.28
1.22
1.18
1.13
1.08
1.02
0.97

2.49
2.31
2.22
2.06
1.91
1.78
1.66
1.56
1.47
1.39
1.32
1.25
1.18
1.12
1.05
1.00
0.94
0.90
0.85
0.81
0.77

1.09
1.03
0.98
0.92
0.87
0.82
0.78
0.74
0.70
0.66
0.63
0.60
0.57
0.55
0.52
0.50
0.48
0.46
0.44
0.42
0.40

2.80
2.62
2.55
2.38
2.22
2.08
1.95
1.83
1.72
1.62
1.53
1.45
1.37
1.29
1.23
1.16
1.10
1.05
1.00
0.95
0.91

3.29
3.11
3.27
3.10
2.93
2.78
2.64
2.51
2.39
2.27
2.15
2.05
1.95
1.85
1.76
1.68
1.60
1.53
1.46
1.40
1.34

Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL300

38

Limit state capacity tables


Double lapped spans
Double lapped spans

Span (mm)

Lap

Span (mm)

Overall purlin length =

39

zeds & cees


purlins & girts

span + 70 mm + (Lap/2)

Limit state capacity tables


Three continuous spans
Three spans
Span (mm)

Span (mm)

Span (mm)

Overall purlin length = 3 x span + 70 mm

zeds & cees


purlins & girts
40

Limit state capacity tables


Three continuous spans
Three spans
Span (mm)

Span (mm)

zeds & cees


purlins & girts

Overall purlin length = 3 x span + 70 mm

41

Span (mm)

Limit state capacity tables


Three continuous spans
Three spans
Span (mm)

Span (mm)

Span (mm)

Overall purlin length = 3 x span + 70 mm

zeds & cees


purlins & girts
42

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


Overall purlin length =

zeds & cees


purlins & girts

span + 70 mm + Lap

43

span + 70 mm + (Lap/2)

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

End span
Span (mm)

zeds & cees


purlins & girts
44

Limit state capacity tables


Three lapped spans

Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


Overall purlin length =

zeds & cees


purlins & girts

span + 70 mm + Lap

45

span + 70 mm + (Lap/2)

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z15)019 (kN/m


IN
Bridging >
Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500

TL150.3

0
9.20
7.22
5.82
4.78
4.00
3.39
2.91
2.51
2.19
1.92
1.69
1.50
1.33
1.19
1.07
0.97
0.87
0.79
0.72
0.65
0.60
0.55
0.51
0.47
0.43
0.40
Bold

T
2

OU
1

Load for
deflect'n
span/150

Three lapped span: Z15)02 (kN/m


IN

T
2

OU
1

12.83 12.83 12.83 12.69 12.83 12.83 12.83


14.57
11.31 18.08 18.08 18.08 18.00 18.08 18.08 18.08
10.56 10.56 10.56
9.94
10.56 10.56 10.56
10.90
8.78
14.88 14.88 14.88 13.94 14.88 14.88 14.88
8.84
8.84
8.84
7.90
8.84
8.84
8.84
8.36
7.01
12.46 12.46 12.46 10.97 12.46 12.46 12.46
5.71
10.58 10.58 10.58
8.75
10.58 10.58 10.58
7.51
7.51
7.51
6.33
7.51
7.51
7.51
6.54
6.45
6.45
6.45
5.05
6.45
6.45
6.45
5.23
4.74
9.09
9.09
9.09
6.87
9.09
9.09
9.09
5.61
5.61
5.61
4.00
5.60
5.61
5.61
4.29
3.99
7.90
7.90
7.90
5.39
7.90
7.90
7.90
4.92
4.92
4.92
3.21
4.76
4.92
4.92
3.57
3.41
6.92
6.92
6.92
4.29
6.74
6.92
6.92
4.34
4.34
4.34
2.62
4.07
4.34
4.34
3.00
2.94
6.07
6.12
6.12
3.46
5.73
6.12
6.12
3.86
3.87
3.87
2.15
3.50
3.87
3.87
2.55
2.56
5.31
5.45
5.45
2.82
4.90
5.45
5.45
3.42
3.46
3.46
1.76
3.03
3.46
3.46
2.19
2.24
4.68
4.88
4.88
2.33
4.21
4.88
4.88
3.05
3.12
3.12
1.47
2.62
3.12
3.12
1.88
1.98
4.15
4.40
4.40
1.95
3.64
4.40
4.40
2.73
2.83
2.83
1.23
2.25
2.77
2.83
1.62
1.76
3.71
3.98
3.98
1.64
3.13
3.93
3.98
2.46
2.57
2.57
1.04
1.94
2.46
2.57
1.41
1.58
3.33
3.62
3.62
1.39
2.66
3.48
3.62
2.23
2.35
2.35
0.89
1.66
2.19
2.35
1.24
1.41
3.00
3.31
3.31
1.19
2.27
3.08
3.31
2.03
2.15
2.16
0.76
1.44
1.96
2.16
1.09
1.28
2.72
3.04
3.04
1.03
1.95
2.75
3.04
1.84
1.96
1.96
0.66
1.25
1.75
1.96
0.97
1.15
2.46
2.77
2.77
0.89
1.68
2.44
2.77
2.51
1.67
1.80
1.80
0.57
1.09
1.56
1.77
0.86
1.05
2.23
2.53
2.53
0.78
1.46
2.17
1.52
1.65
1.65
0.50
0.96
1.40
1.60
0.77
0.96
2.04
2.33
2.33
0.69
1.28
1.95
2.26
1.40
1.52
1.52
0.44
0.84
1.25
1.45
0.69
0.87
1.86
2.14
2.14
0.61
1.12
1.74
2.04
1.28
1.41
1.41
0.74
1.12
1.31
0.62
0.80
1.71
1.98
1.98
0.54
0.99
1.55
1.85
1.18
1.31
1.31
0.65
1.00
1.20
0.56
0.73
1.58
1.84
1.84
0.48
0.87
1.38
1.68
1.14
1.29
1.29
0.59
0.91
1.14
0.51
0.69
1.51
1.82
1.82
0.44
0.79
1.25
1.60
1.06
1.21
1.21
0.52
0.82
1.05
0.47
0.63
1.40
1.70
1.71
0.71
1.12
1.46
0.98
1.13
1.13
0.47
0.73
0.96
0.42
0.58
1.30
1.58
1.59
0.63
1.00
1.33
0.91
1.05
1.06
0.42
0.66
0.87
0.39
0.54
1.20
1.47
1.49
0.57
0.90
1.22
0.85
0.97
0.99
00.6
0.79
0.35
0.50
1.12
1.36
1.39
0.51
0.81
1.11
capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

Load for
deflect'n
span/150

19.43
14.53
11.14
8.73
6.98
5.68
4.70
3.93
3.33
2.82
2.42
2.08
1.81
1.58
1.39
1.22
1.09
0.97
0.87
0.78
0.70
0.64
0.59
0.53
0.49
0.45

zeds & cees


purlins & girts
46

Limit state capacity tables


Three lapped spans

Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z20)015 (kN/m


IN

OU

Bridging >

1, 2, 3

Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

10.60
8.44
6.77
5.55
4.62
3.91
3.34
2.89
2.52
2.21
1.96
1.74
1.55
1.40
1.21
1.09
0.99
0.90
0.83
0.76
0.69
0.65
0.60
0.56
0.52
0.48
0.44

10.60
9.13
7.95
6.97
6.15
5.39
4.73
4.18
3.72
3.33
3.00
2.72
2.47
2.26
2.07
1.89
1.73
1.59
1.46
1.35
1.26
1.24
1.17
1.09
1.02
0.95
0.89

10.60
9.13
7.95
6.97
6.15
5.21
4.27
3.48
2.87
2.38
2.00
1.69
1.39
1.21
1.05
0.92
0.81
0.71
0.63
0.56
0.49
0.45
0.40

10.60
9.13
7.95
6.97
6.15
5.39
4.73
4.18
3.72
3.33
3.00
2.72
2.46
2.17
1.91
1.66
1.45
1.27
1.12
0.99
0.88
0.81
0.72
0.62
0.56
0.51
0.47

10.60
9.13
7.95
6.97
6.15
5.39
4.73
4.18
3.72
3.33
3.00
2.72
2.47
2.26
2.07
1.89
1.73
1.59
1.46
1.35
1.26
1.19
1.09
0.98
0.88
0.80
0.72

10.60
9.13
7.95
6.97
6.15
5.39
4.73
4.18
3.72
3.33
3.00
2.72
2.47
2.26
2.07
1.89
1.73
1.59
1.46
1.35
1.26
1.24
1.17
1.09
1.02
0.95
0.89

11100
11400
11700
12000

0.41

Load for
deflection
span/150
22.08
16.51
12.66
9.92
7.91
6.41
5.26
4.37
3.67
3.12
2.70
2.36
2.08
1.85
1.65
1.48
1.33
1.19
1.07
0.97
0.88
0.80
0.73
0.67
0.61
0.56
0.52

Three lapped span: Z20)015/2002 (kN/m


IN

OU

1, 2, 3

12.73
10.70
8.67
6.94
5.68
4.73
4.00
3.42
2.96
2.58
2.27
2.00
1.78
1.60
1.44
1.30
1.17
1.07
0.97
0.89
0.82
0.75
0.69
0.64
0.59
0.54
0.51

12.73
10.70
9.12
7.86
6.84
6.00
5.30
4.71
4.21
3.79
3.37
3.01
2.70
2.43
2.21
2.01
1.84
1.69
1.55
1.44
1.33
1.34
1.24
1.16
1.08
1.01
0.95

12.73
10.70
9.12
7.86
6.84
6.00
5.30
4.71
4.21
3.57
3.00
2.54
2.17
1.87
1.62
1.41
1.24
1.09
0.97
0.83
0.74
0.70
0.63
0.57
0.52
0.48
0.44

12.73
10.70
9.12
7.8 6
6.84
6.00
5.30
4.71
4.21
3.79
3.37
3.01
2.70
2.43
2.21
2.01
1.84
1.69
1.55
1.43
1.29
1.22
1.10
0.99
0.89
0.81
0.74

12.73
10.70
9.12
7.86
6.84
6.00
5.30
4.71
4.21
3.79
3.37
3.01
2.70
2.43
2.21
2.01
1.84
1.69
1.55
1.44
1.33
1.34
1.24
1.16
1.08
1.01
0.95

12.73
10.70
9.12
7.86
6.84
6.00
5.30
4.71
4.21
3.79
3.37
3.01
2.70
2.43
2.21
2.01
1.84
1.69
1.55
1.44
1.33
1.34
1.24
1.16
1.08
1.01
0.95

Load for
deflection
span/150
39.72
29.66
22.72
17.79
14.18
11.48
9.43
7.90
6.71
5.75
4.97
4.32
3.76
3.29
2.90
2.57
2.29
2.05
1.85
1.66
1.50
1.37
1.25
1.14
1.04
0.95
0.87

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

47

zeds & cees


purlins & girts

0.84
0.43
0.66
0.84
0.48
0.47
0.89
0.40
0.67
0.89
0.89
0.80
0.79
0
0.6
0.78
0.44
0.44
0.84
0.61
0.84
0.84
0.74
0.74
5
0.5
0.72
0.41
0.41
0.79
0.56
0.79
0.79
0.69
0.70
0
0.5
0.67
0.38
0.75
0.52
0.74
0.75
0.64
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
TL200.1

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z20)019 (kN/m


Bridging >

2, 3

Load for
deflect'n
span/150

18.79
15.47
12.95
11.00
9.45
8.21
7.20
6.36
5.66
5.07
4.57
4.14
3.77
3.44
3.16
2.88
2.63
2.42
2.22
2.03
1.87
1.79
1.66
1.54
1.43
1.33
1.24

18.79
15.47
12.95
11.00
9.45
8.21
7.20
6.36
5.66
5.07
4.57
4.14
3.77
3.44
3.16
2.88
2.63
2.42
2.23
2.06
1.91
1.89
1.78
1.66
1.55
1.45
1.36

18.79
15.47
12.95
11.00
9.18
7.52
6.07
4.84
4.04
3.41
2.90
2.48
2.10
1.80
1.55
1.35
1.17
1.02
0.89
0.78
0.69
0.62
0.56
0.50
0.45
0.40

18.79
15.47
12.95
11.00
9.45
8.21
7.20
6.36
5.66
5.07
4.57
4.09
3.59
3.15
2.74
2.30
2.03
1.79
1.59
1.42
1.27
1.18
1.07
0.96
0.86
0.78
0.70

18.79
15.47
12.95
11.00
9.45
8.21
7.20
6.36
5.66
5.07
4.57
4.14
3.77
3.44
3.16
2.88
2.63
2.42
2.23
2.03
1.84
1.74
1.56
1.41
1.23
1.12
1.02

18.79
15.47
12.95
11.00
9.45
8.2 1
7.20
6.3 6
5.66
5.07
4.57
4.14
3.77
3.44
3.16
2.88
2.63
2.42
2.23
2.06
1.91
1.89
1.78
1.66
1.55
1.44
1.33

31.46
23.52
18.04
14.13
11.27
9.13
7.50
6.23
5.24
4.47
3.85
3.34
2.91
2.56
2.26
2.01
1.79
1.61
1.45
1.31
1.19
1.09
1.00
0.91
0.84
0.77
0.71

Three lapped span: Z20)02 (kN/m

2, 3

Load for
deflect'n
span/150

18.42
14.22
11.13
8.94
7.32
6.09
5.15
4.41
3.81
3.32
2.92
2.59
2.31
2.07
1.86
1.69
1.53
1.40
1.28
1.17
1.08
1.00
0.93
0.86
0.80
0.74
0.69

19.78
17.99
16.50
15.24
13.74
11.94
10.47
9.25
8.23
7.27
6.46
5.77
5.18
4.67
4.24
3.83
3.47
3.17
2.90
2.66
2.45
2.35
2.17
2.01
1.86
1.73
1.61

19.78
17.99
16.50
15.24
13.74
11.94
10.47
9.25
8.23
7.3 8
6.6 4
6.02
5.47
5.0 0
4.5 9
4.18
3.83
3.52
3.24
3.00
2.78
2.75
2.58
2.41
2.25
2.10
1.96

19.78
17.99
16.50
15.24
12.55
10.41
8.58
6.98
5.75
4.80
4.02
3.36
2.84
2.42
2.07
1.78
1.55
1.35
1.18
1.04
0.92
0.84
0.75
0.67
0.60
0.54
0.49

19.78
17.99
16.50
15.24
13.74
11.94
10.47
9.25
8.23
7.25
6.35
5.60
4.95
4.39
3.88
3.40
2.97
2.60
2.30
2.04
1.81
1.66
1.47
1.32
1.18
1.06
0.95

19.78
17.99
16.50
15.24
13.74
11.94
10.47
9.25
8.23
7.38
6.64
6.02
5.47
5.00
4.59
4.17
3.75
3.39
3.07
2.78
2.54
2.42
2.21
2.00
1.82
1.64
1.49

19.78
17.99
16.50
15.24
13.74
11.94
10.47
9.25
8.23
7.38
6.64
6.02
5.47
5.00
4.59
4.18
3.83
3.52
3.24
3.00
2.78
2.73
2.52
2.32
2.14
1.97
1.82

41.54
31.06
23.82
18.66
14.88
12.06
9.90
8.23
6.93
5.94
5.13
4.46
3.91
3.45
3.04
2.69
2.40
2.14
1.93
1.74
1.58
1.44
1.32
1.20
1.10
1.00
0.92

0.54
1.15
1.28
0.64
0.93
1.23
0.66
0.65
1.50
1.84
0.45
0.86
1.36
1.69
0.50
1.08
1.21
0.58
0.86
1.13
0.61
0.60
1.40
1.72
0.41
0.78
1.24
1.57
0.47
1.00
1.14
0.53
0.79
1.05
0.56
0.56
1.31
1.62
0.71
1.13
1.46
1.23
1.52
0.65
1.04
1.36
0.44
0.94
1.08
0.48
0.73
0.96
0.52
0.53
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

0.85
0.78
0.72
0.67

IN
0

Span 3000 13.75


(mm) 3300 10.77
3600 8.66
3900 7.10
4200 5.93
4500 5.02
4800 4.29
5100 3.69
5400 3.21
5700 2.81
6000 2.48
6300 2.20
6600 1.97
6900 1.77
7200 1.59
7500 1.44
7800 1.31
8100 1.19
8400 1.09
8700 1.00
9000 0.92
9300 0.86
9600 0.79
9900 0.73
10200 0.68
10500 0.63
10800 0.58

OU

IN

OU

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
11400
11700
12000

TL200.2

zeds & cees


purlins & girts
48

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z25)019 (kN/m


Bridging >

2, 3

Load for
deflection
span/150

Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

17.28
13.93
11.15
9.12
7.59
6.38
5.42
4.65
4.04
3.53
3.12
2.77
2.47
2.22
2.00
1.81
1.64
1.49
1.37
1.25
1.15
1.07
0.99
0.91
0.84
0.78
0.73

17.28
15.00
13.16
11.64
10.36
9.28
8.35
7.55
6.85
6.24
5.70
5.23
4.78
4.37
4.01
3.65
3.34
3.07
2.83
2.62
2.43
2.37
2.19
2.02
1.87
1.73
1.61

17.28
15.00
13.16
11.64
10.36
9.28
8.35
7.55
6.85
6.24
5.70
5.23
4.78
4.37
4.01
3.65
3.34
3.07
2.83
2.62
2.43
2.40
2.25
2.10
1.96
1.84
1.73

17.28
15.00
13.16
11.64
10.36
9.28
7.80
6.42
5.34
4.49
3.80
3.23
2.73
2.33
2.01
1.74
1.51
1.31
1.14
1.00
0.88
0.80
0.71
0.63
0.56
0.51
0.46

17.28
15.00
13.16
11.64
10.36
9.28
8.35
7.55
6.85
6.24
5.70
5.23
4.78
4.19
3.63
3.06
2.69
2.37
2.10
1.87
1.67
1.55
1.40
1.25
1.12
1.00
0.91

17.28
15.00
13.16
11.64
10.36
9.28
8.35
7.55
6.85
6.24
5.70
5.23
4.78
4.37
4.01
3.65
3.34
3.07
2 .83
2.62
2.43
2.31
2.07
1.80
1.63
1.48
1.35

17.28
15.00
13.16
11.64
10.36
9.28
8.35
7.55
6.85
6.24
5.70
5.23
4.78
4.37
4.01
3.65
3.34
3.07
2.83
2.62
2.43
2.40
2.25
2.10
1.96
1.84
1.73

51.10
38.21
29.30
22.95
18.30
14.83
12.18
10.12
8.50
7.21
6.17
5.32
4.61
4.04
3.60
3.23
2.91
2.63
2.38
2.15
1.95
1.78
1.63
1.49
1.36
1.26
1.16

IN

OU

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
0.67
1.50
1.62
0.41
0.82
1.24
1.62
1.07
11400
0.63
1.40
1.53
5
0.7
1.13
1.52
0.99
11700
0.58
1.31
1.44
8
0.6
1.04
1.39
0.92
12000
0.54
1.22
1.37
2
0.6
0.95
1.28
0.86
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

49

zeds & cees


purlins & girts

TL250.1

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z25)019/25024 (kN/m


Bridging >

Span 3000 19.82


(mm) 3300 17.09
3600 13.10
3900 10.46
4200 8.53
4500 7.08
4800 5.97
5100 5.10
5400 4.40
5700 3.83
6000 3.36
6300 2.98
6600 2.65
6900 2.37
7200 2.13
7500 1.93
7800 1.75
8100 1.59
8400 1.46
8700 1.33
9000 1.23
9300 1.15
9600 1.06
9900 0.98
10200 0.91
10500 0.84
10800 0.78

4 Three lapped span: Z25)02 (kN/m

2,3

Load for
deflect'n
span/150

19.82
17.88
15.36
13.34
11.69
10.33
9.18
8.21
7.39
6.67
6.06
5.52
5.04
4.56
4.14
3.77
3.45
3.17
2.92
2.70
2.50
2.50
2.33
2.16
2.01
1.87
1.74

19.82
17.88
15.36
13.34
11.69
10.33
9.18
8.21
7.39
6.67
6.06
5.52
5.04
4.56
4.14
3.77
3.45
3.17
2.92
2.70
2.50
2.50
2.33
2.17
2.03
1.90
1.78

19.82
17.88
15.36
13.34
11.69
10.33
9.18
7.83
6.47
5.40
4.56
3.88
3.32
2.87
2.47
2.13
1.86
1.63
1.43
1.27
1.13
1.02
0.91
0.81
0.73
0.66
0.59

19.82
17.88
15.36
13.34
11.69
10.33
9.18
8.21
7.39
6.67
6.06
5.52
5.04
4.56
4.14
3.75
3.30
2.90
2.48
2.22
1.98
1.85
1.66
1.50
1.36
1.24
1.13

19.82
17.88
15.36
13.34
11.69
10.33
9.18
8.21
7.39
6.67
6.06
5.52
5.04
4.56
4.14
3.77
3.45
3.17
2.92
2.70
2.50
2.50
2.33
2.17
2.02
1.84
1.67

19.82
17.88
15.36
13.34
11.69
10.33
9.18
8.2 1
7.39
6.67
6.06
5.52
5.04
4.5 6
4.14
3.77
3.45
3.17
2.92
2.70
2.50
2.50
2.33
2.17
2.03
1.90
1.78

68.59
51.26
39.29
30.77
24.54
19.88
16.32
13.57
11.40
9.66
8.27
7.15
6.25
5.50
4.87
4.33
3.87
3.47
3.12
2.81
2.54
2.32
2.12
1.93
1.77
1.63
1.50

IN

OU

2,3

Load for
deflect'n
span/150

19.78
17.87
13.95
11.16
9.12
7.58
6.40
5.46
4.72
4.11
3.61
3.20
2.85
2.55
2.29
2.07
1.88
1.71
1.57
1.44
1.32
1.23
1.13
1.05
0.97
0.91
0.84

19.78
17.99
16.50
15.24
14.16
13.22
12.40
11.68
10.55
9.45
8.52
7.67
6.87
6.19
5.60
5.06
4.58
4.17
3.81
3.49
3.20
3.04
2.81
2.59
2.39
2.21
2.05

19.78
17.99
16.50
15.24
14.16
13.22
12.40
11.68
10.55
9.45
8.52
7.71
7.0 2
6.4 1
5.88
5.3 6
4.9 1
4.51
4.15
3.8 4
3.5 6
3.53
3.31
3.08
2.88
2.70
2.53

19.78
17.99
16.50
15.24
14.16
13.22
11.27
9.13
7.50
6.24
5.20
4.35
3.66
3.11
2.65
2.28
1.97
1.72
1.50
1.32
1.17
1.05
0.94
0.84
0.75
0.68
0.61

19.78
17.99
16.50
15.24
14.16
13.22
12.40
11.68
10.55
9.45
8.52
7.48
6.59
5.82
5.10
4.44
3.87
3.39
2.98
2.64
2.35
2.14
1.90
1.69
1.51
1.36
1.22

19.78
17.99
16.50
15.24
14.16
13.22
12.40
11.68
10.55
9.45
8.52
7.71
7.02
6.41
5.88
5.36
4.91
4.51
4.10
3.72
3.38
3.21
2.91
2.63
2.37
2.14
1.94

19.78
17.99
16.50
15.24
14.16
13.22
12.40
11.68
10.55
9.45
8.52
7.71
7.02
6.41
5.88
5.36
4.91
4.51
4.15
3.84
3.56
3.53
3.31
3.08
2.86
2.64
2.44

70.48
52.70
40.41
31.65
25.24
20.45
16.80
13.96
11.73
9.95
8.51
7.33
6.38
5.61
4.97
4.42
3.95
3.55
3.20
2.89
2.61
2.39
2.18
1.99
1.82
1.67
1.54

IN

OU

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
11400
11700
12000

0.73
1.62
1.68
0.54
1.02
1.52
1.68
1.39
0.79
1.91
2.38
0.55
1.10
1.76
2.25
1.42
0.68
1.51
1.58
0.49
0.93
1.34
1.58
1.28
0.73
1.78
2.25
0.50
1.00
1.61
2.09
1.31
0.63
1.41
1.49
0.45
0.85
1.23
1.49
1.19
0.69
1.66
2.12
0.46
0.90
1.47
1.94
1.21
0.59
1.32
1.41
0.41
0.77
1.14
1.41
1.10
0.64
1.56
2.00
0.42
0.82
1.34
1.79
1.13
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
TL250.2

zeds & cees


purlins & girts
50

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span

End span

Span (mm)

Span (mm)

Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z30)024 (kN/m


IN

0 Three lapped span: Z30)024/3003 (kN/m

OU

Bridging >

Span 6000
(mm) 6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

5.36
4.70
4.15
3.69
3.30
2.97
2.68
2.43
2.21
2.03
1.86
1.72
1.59
1.47
1.37
1.27
1.19

10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.66
5.16
4.73
4.51
4.14
3.80
3.50
3.24
3.00

10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.71
5.28
4.89
4.85
4.54
4.24
3.96
3.71
3.48

10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.71
5.28
4.89
4.85
4.54
4.24
3.96
3.71
3.48

10.12
8.59
7.29
6.35
5.57
4.88
4.25
3.73
3.28
2.88
2.53
2.29
2.04
1.81
1.62
1.46
1.31

10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.62
5.06
4.57
4.22
3.79
3.35
3.04
2.77
2.53

10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.71
5.28
4.89
4.85
4.54
4.24
3.96
3.71
3.48

11100
11400
11700
12000
12300
12600
12900
13200
13500
13800
14100
14400
14700
15000
15300
15600
15900
16200
16500
16800
17100
17400

1.11
1.04
0.97
0.91
0.87
0.82
0.77
0.73
0.69
0.65
0.62
0.58
0.56
0.53
0.50
0.48
0.45
0.43
0.41

3
10.31
9.50
8.77
8.12
7.54
7.01
6.53
6.10
5.71
5.28
4.89
4.85
4.54
4.24
3.96
3.71
3.48

Load for
deflect'n
span/150

2, 3

Load for
deflect'n
span/150

14.12
12.17
10.56
9.22
8.10
7.16
6.35
5.73
5.20
4.73
4.31
3.95
3.60
3.29
3.02
2.77
2.55

5.96
5.20
4.58
4.06
3.62
3.25
2.93
2.66
2.42
2.21
2.02
1.88
1.73
1.60
1.49
1.38
1.29

11.20
10.24
9.40
8.65
7.99
7.40
6.87
6.38
5.88
5.44
5.04
4.89
4.50
4.15
3.84
3.55
3.28

11.20
10.24
9.40
8.65
7.99
7.40
6.87
6.38
5.88
5.44
5.04
5.04
4.69
4.37
4.08
3.82
3.59

11.20
10.24
8.82
7.58
6.47
5.68
5.01
4.45
3.97
3.53
3.14
2.89
2.57
2.29
2.06
1.85
1.67

11.20
10.24
9.40
8.65
7.99
7.40
6.87
6.38
5.88
5.44
5.04
4.94
4.49
4.09
3.70
3.35
3.05

11.20
10.24
9.40
8.65
7.99
7.40
6.87
6.38
5.88
5.44
5.04
5.04
4.69
4.37
4.08
3.82
3.59

11.20
10.24
9.40
8.65
7.99
7.40
6.87
6.38
5.88
5.44
5.04
5.04
4.69
4.37
4.08
3.82
3.59

18.35
15.81
13.73
11.99
10.53
9.38
8.3 9
7.5 5
6.8 1
6.1 7
5.6 1
5.1 5
4.7 0
4.3 0
3.9 4
3.6 2
3.3 4

IN

OU

51

zeds & cees


purlins & girts

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

2.78
3.27
3.27
1.18
2.32
3.27
3.27
2.36
1.20
3.05
3.38
1.51
2.77
3.38
3.38
3.0 8
2.59
3.09
3.09
1.07
2.13
3.04
3.09
2.18
1.13
2.83
3.18
1.37
2.49
3.18
3.18
2.8 4
2.42
2.91
2.91
0.97
1.96
2.81
2.91
2.02
1.05
2.64
3.00
1.24
2.30
3.00
3.00
2.6 3
2.26
2.75
2.75
0.88
1.80
2.61
2.75
1.88
0.99
2.47
2.84
1.14
2.12
2.84
2.84
2.4 3
2.14
2.78
2.78
0.83
1.71
2.49
2.78
1.77
0.94
2.37
3.00
1.07
2.08
2.96
3.00
2.3 0
2.02
2.65
2.65
0.76
1.57
2.30
2.65
1.65
0.89
2.22
2.84
0.98
1.93
2.75
2.84
2.1 3
1.9 9
1.90
2.52
2.52
0.70
1.44
2.12
2.52
1.55
0.84
2.08
2.69
0.90
1.79
2.56
2.69
1.80
2.41
2.41
0.64
1.32
1.97
2.41
1.45
0.79
1.96
2.55
0.83
1.65
2.39
2.55
1.8 5
1.70
2.30
2.30
0.59
1.21
1.80
2.30
1.36
0.75
1.85
2.42
0.76
1.52
2.22
2.42
1.7 3
1.61
2.20
2.20
0.54
1.12
1.68
2.17
1.28
0.71
1.75
2.30
0.70
1.41
2.06
2.30
1.6 2
1.53
2.11
2.11
0.50
1.03
1.57
2.04
1.20
0.67
1.65
2.19
0.65
1.31
1.91
2.19
1.5 2
1.45
2.02
2.02
0.46
0.95
1.47
1.92
1.14
0.64
1.56
2.08
0.60
1.22
1.78
2.08
1.4 2
1.38
1.93
1.93
0.43
0.88
1.37
1.81
1.07
0.60
1.48
1.99
0.56
1.13
1.66
1.99
1.3 4
1.31
1.84
1.84
0.40
0.81
1.29
1.69
1.01
0.57
1.41
1.90
0.52
1.04
1.55
1.90
1.2 6
1.24
1.76
1.76
0.75
1.21
1.58
0.95
0.55
1.34
1.82
0.49
0.97
1.42
1.82
1.1 8
1.18
1.67
1.68
0.70
1.13
1.48
0.90
0.52
1.27
1.74
0.45
0.90
1.34
1.72
1.1 2
1.13
1.59
1.61
0.65
1.06
1.38
0.85
0.50
1.21
1.66
0.42
0.84
1.26
1.63
1.0 5
1.07
1.52
1.55
0.61
1.00
1.30
0.81
0.47
1.16
1.60
0.40
0.78
1.19
1.54
1.0 0
1.03
1.45
1.49
0.57
0.93
1.22
0.76
0.45
1.10
1.53
0.73
1.12
1.46
0.9 4
0.98
1.39
1.43
0.53
0.88
1.13
0.73
0.43
1.05
1.47
0.68
1.06
1.38
0.8 9
0.94
1.33
1.37
0.49
0.82
1.06
0.69
0.41
1.01
1.41
0.64
1.00
1.30
0.8 5
0.60
0.94
1.23
0.8 0
0.90
1.27
1.32
0.46
0.78
1.01
0.65
0.96
1.36
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for cap acity tables. In mixed spans, the thicker section is used in the end spans.
TL300.1

Limit state capacity tables


Three lapped spans
Three lapped spans

Lap

End span
Span (mm)

Span (mm)

End span
Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Overall purlin length =


span + 70 mm + Lap

Three lapped span: Z30)030 (kN/m


IN

OU

Bridging >

Span 6000
(mm) 6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

6.31
5.51
4.85
4.30
3.83
3.44
3.10
2.81
2.55
2.33
2.14
1.98
1.83
1.69
1.57
1.46
1.36

16.68
15.10
13.69
12.31
11.12
10.01
9.05
8.21
7.48
6.84
6.28
5.97
5.47
5.02
4.61
4.26
3.94

16.68
15.10
13.74
12.55
11.51
10.49
9.60
8.82
8.13
7.52
6.98
6.91
6.48
6.04
5.64
5.29
4.96

16.68
15.10
13.74
12.55
11.51
10.49
9.60
8.82
8.13
7.52
6.98
6.91
6.48
6.04
5.64
5.29
4.96

14.28
12.15
10.39
8.83
7.56
6.50
5.62
4.89
4.27
3.75
3.31
3.00
2.67
2.38
2.13
1.91
1.73

16.68
15.10
13.74
12.55
11.51
10.47
9.41
8.49
7.68
6.97
6.34
6.00
5.40
4.87
4.40
3.97
3.58

16.68
15.10
13.74
12.55
11.51
10.49
9.60
8.82
8.13
7.52
6.98
6.91
6.48
6.04
5.63
5.20
4.82

3
16.68
15.10
13.74
12.55
11.51
10.49
9.60
8.82
8.13
7.52
6.98
6.91
6.48
6.04
5.64
5.29
4.96

Three lapped span: Z35)03 (kN/m

Load for
deflect'n
span/150

18.83
16.23
14.09
12.30
10.81
9.55
8.53
7.66
6.92
6.27
5.70
5.23
4.79
4.40
4.03
3.70
3.41

9.78
8.46
7.36
6.45
5.69
5.05
4.51
4.06
3.66
3.32
3.02
2.78
2.55
2.35
2.17
2.01
1.86

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.27
7.62
7.00
6.45
5.92
5.46

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.46
7.93
7.39
6.91
6.47
6.08

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.46
7.93
7.39
6.91
6.47
6.08

17.56
16.20
14.99
13.90
12.89
11.23
9.82
8.64
7.62
6.76
5.89
5.50
4.98
4.51
4.09
3.72
3.36

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.46
7.93
7.39
6.91
6.39
5.88

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.46
7.93
7.39
6.91
6.47
6.08

IN

OU
3

Load for
deflect'n
span/150

17.56
16.20
14.99
13.90
12.92
12.03
11.23
10.50
9.83
9.21
8.54
8.46
7.93
7.39
6.91
6.47
6.08

29.23
25.20
21.87
19.10
16.78
14.82
13.15
11.73
10.50
9.44
8.51
7.80
7.15
6.60
6.08
5.59
5.15

1.27
3.66
4.67
4.67
1.56
3.23
4.47
4.67
3.15
1.74
5.04
5.71
5.71
3.05
5.42
5.71
5.71
1.19
3.40
4.40
4.40
1.41
2.93
4.16
4.40
2.92
1.62
4.66
5.38
5.38
2.78
4.98
5.38
5.38
1.12
3.16
4.15
4.15
1.29
2.66
3.87
4.15
2.70
1.51
4.33
5.08
5.08
2.53
4.57
5.08
5.08
2.50
1.42
4.02
4.80
4.80
2.32
4.19
4.80
4.80
1.05
2.94
3.92
3.92
1.17
2.42
3.61
3.92
1.00
2.80
3.88
3.97
1.10
2.27
3.52
3.97
2.36
1.34
3.86
4.85
4.85
2.20
4.00
4.85
4.85
0.94
2.62
3.67
3.78
1.01
2.08
3.28
3.76
2.19
1.26
3.61
4.62
4.62
2.01
3.69
4.62
4.62
0.89
2.45
3.47
3.60
0.93
1.90
3.03
3.54
2.04
1.19
3.38
4.41
4.41
1.84
3.41
4.41
4.41
0.84
2.30
3.29
3.44
0.85
1.75
2.81
3.33
1.91
1.12
3.17
4.20
4.20
1.68
3.15
4.20
4.20
0.80
2.16
3.12
3.28
0.78
1.61
2.61
3.15
1.78
1.06
2.97
4.02
4.02
1.55
2.92
4.02
4.02
3.84
3.84
0.76
2.04
2.96
3.14
0.72
1.48
2.43
2.97
1.66
1.00
2.80
3.84
3.84
1.43
2.65
0.72
1.92
2.81
3.00
0.67
1.36
2.25
2.81
1.56
0.95
2.57
3.68
3.68
1.32
2.48
3.63
3.68
0.68
1.81
2.68
2.88
0.62
1.26
2.08
2.66
1.46
0.90
2.44
3.52
3.52
1.22
2.32
3.42
3.52
0.65
1.71
2.54
2.75
0.58
1.17
1.93
2.50
1.37
0.86
2.30
3.36
3.36
1.13
2.17
3.21
3.36
0.62
1.62
2.42
2.62
0.54
1.08
1.79
2.37
1.29
0.82
2.18
3.21
3.21
1.04
2.03
3.02
3.21
0.59
1.53
2.30
2.51
0.50
1.00
1.66
2.23
1.22
0.78
2.07
3.07
3.07
0.97
1.90
2.84
3.07
0.56
1.46
2.19
2.39
0.47
0.93
1.55
2.10
1.15
0.74
1.96
2.94
2.94
0.90
1.79
2.66
2.94
2.82
2.82
0.84
1.68
2.49
2.82
0.53
1.38
2.09
2.28
0.44
0.87
1.44
1.97
1.08
0.71
1.87
0.51
1.31
1.99
2.17
0.41
0.81
1.34
1.85
1.02
0.67
1.78
2.70
2.70
0.78
1.58
2.34
2.70
0.49
1.25
1.90
2.08
0.76
1.25
1.74
0.97
0.64
1.69
2.57
2.59
0.73
1.49
2.20
2.59
0.47
1.19
1.82
1.99
0.71
1.17
1.64
0.92
0.62
1.61
2.45
2.49
0.69
1.39
2.07
2.49
0.45
1.13
1.74
1.90
0.66
1.10
1.54
0.87
0.59
1.54
2.34
2.39
0.64
1.31
1.95
2.39
0.43
1.08
1.66
1.82
0.62
1.03
1.46
0.82
0.57
1.47
2.23
2.30
0.60
1.23
1.83
2.30
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.

4.76
4.41
4.09
3.80
3.58
3.33
3.11
2.91
2.73
2.56
2.40
2.26
2.13
2.01
1.90
1.79
1.69
1.61
1.53
1.45
1.38
1.31

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
11400
11700
12000
12300
12600
12900
13200
13500
13800
14100
14400
14700
15000
15300
15600
15900
16200
16500
16800
17100
17400

TL300/350

zeds & cees


purlins & girts
52

Limit state capacity tables


Four continuous spans
Four spans
Span (mm)

Span (mm)

Span (mm)

zeds & cees


purlins & girts

Overall purlin length = 4 x span + 70 mm

53

Span (mm)

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span
Span (mm)

End span
Span (mm)

Span (mm)

Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Span (mm)

zeds & cees


purlins & girts
54

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span
Span (mm)

Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Span (mm)

zeds & cees


purlins & girts

Span (mm)

55

Span (mm)

End span

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span

End span
Span (mm)

Span (mm)

Span (mm)

Span (mm)
Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Four lapped span: Z150)19 (kN/m

Four lapped span: Z15015)/15024 (kN/m


IN
Bridging >

Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

9.17
7.02
5.55
4.49
3.71
3.11
2.64
2.27
1.97
1.72
1.51
1.34
1.20
1.07
0.96
0.87
0.79
0.72
0.65
0.60
0.55
0.52
0.48
0.44
0.40

O UT
2, 3

12.11 12.11 12.11 12.11 12.11 12.11


9.79 9.79 9.79 9.79 9.79 9.79
8.05 8.05 8.05 8.05 8.05 8.05
6.59 6.59 6.59 6.59 6.59 6.59
5.43 5.43 5.28 5.43 5.43 5.43
4.56 4.56 4.28 4.56 4.56 4.56
3.88 3.88 3.51 3.88 3.88 3.88
3.34 3.34 2.88 3.34 3.34 3.34
2.91 2.91 2.38 2.91 2.91 2.91
2.56 2.56 1.94 2.56 2.56 2.56
2.27 2.27 1.65 2.27 2.27 2.27
2.02 2.02 1.42 2.02 2.02 2.02
1.82 1.82 1.23 1.82 1.82 1.82
1.64 1.64 1.07 1.64 1.64 1.64
1.49 1.49 0.94 1.45 1.49 1.49
1.36 1.36 0.83 1.29 1.36 1.36
1.24 1.24 0.74 1.15 1.24 1.24
1.14 1.14 0.66 1.03 1.14 1.14
1.05 1.05 0.58 0.91 1.05 1.05
0.97 0.97 0.52 0.82 0.97 0.97
0.90 0.90 0.47 0.73 0.90 0.90
0.90 0.90 0.44 0.67 0.90 0.90
0.84 0.84
0.60 0.82 0.84
0.78 0.78
0.55 0.75 0.78
0.73 0.73
0.50 0.69 0.73
0.68 0.68
0.46 0.63 0.68
0.64 0.64
0.42 0.58 0.64

Load
for
defl'n

span/150

20.75
15.44
11.79
9.20
7.32
5.93
4.88
4.07
3.43
2.93
2.50
2.16
1.87
1.63
1.43
1.26
1.12
1.00
0.89
0.80
0.72
0.67
0.61
0.55
0.50
0.46
0.42

IN
0
9.42
7.39
5.95
4.89
4.09
3.47
2.96
2.54
2.21
1.93
1.70
1.51
1.34
1.20
1.08
0.98
0.88
0.80
0.73
0.67
0.61
0.57
0.53
0.48
0.45
0.41

OU
T
2

13.64 13.64 13.64 13.56 13.64 13.64 13.64


11.21 11.21 11.21 10.61 11.21 11.21 11.21
9.37 9.37 9.37 8.43 9.37 9.37 9.37
7.94 7.94 7.94 6.77 7.94 7.94 7.94
6.82 6.82 6.82 5.39 6.82 6.82 6.82
5.92 5.92 5.92 4.29 5.92 5.92 5.92
5.16 5.16 5.16 3.43 5.02 5.16 5.16
4.45 4.45 4.45 2.78 4.22 4.45 4.45
3.88 3.88 3.88 2.29 3.59 3.88 3.88
3.40 3.41 3.41 1.88 3.07 3.41 3.41
2.99 3.03 3.03 1.56 2.64 3.03 3.03
2.65 2.70 2.70 1.31 2.29 2.70 2.70
2.37 2.43 2.43 1.10 1.97 2.39 2.43
2.12 2.19 2.19 0.94 1.71 2.11 2.19
1.92 1.99 1.99 0.81 1.48 1.88 1.99
1.74 1.81 1.81 0.70 1.28 1.68 1.81
1.58 1.66 1.66 0.61 1.12 1.51 1.66
1.44 1.52 1.52 0.53 0.98 1.36 1.52
1.32 1.41 1.41 0.47 0.87 1.22 1.38
1.21 1.30 1.30 0.41 0.77 1.11 1.26
1.12 1.21 1.21
0.68 0.99 1.15
1.08 1.18 1.20
0.62 0.93 1.11
1.00 1.09 1.12
0.55 0.83 1.01
0.93 1.01 1.04
0.49 0.75 0.93
0.86 0.94 0.98
0.44 0.67 0.85
0.80 0.87 0.91
0.40 0.61 0.78
0.75 0.81 0.86
0.55 0.72

Load
for
defl'n

span/150

16.29
12.14
9.29
7.25
5.77
4.67
3.82
3.20
2.71
2.32
2.01
1.74
1.53
1.34
1.18
1.04
0.93
0.83
0.74
0.67
0.61
0.56
0.51
0.46
0.42
0.39
0.35

Four lapped4span: Z150)2 (kN/m


IN
0

OU
T
2

11.57 18.71 18.71 18.71 18.71 18.71 18.71 18.71


8.97 15.79 15.79 15.79 14.89 15.79 15.79 15.79
7.15 13.20 13.20 13.20 11.71 13.20 13.20 13.20
5.82 11.19 11.19 11.19 9.33 11.19 11.19 11.19
4.83 9.61 9.61 9.61 7.38 9.61 9.61 9.61
4.06 8.34 8.34 8.34 5.78 8.34 8.34 8.34
3.46 7.27 7.27 7.27 4.59 7.13 7.27 7.27
2.98 6.23 6.27 6.27 3.69 5.96 6.27 6.27
2.59 5.37 5.47 5.47 3.01 5.04 5.47 5.47
2.26 4.68 4.81 4.81 2.48 4.29 4.81 4.81
2.00 4.11 4.26 4.26 2.07 3.68 4.26 4.26
1.77 3.63 3.80 3.80 1.74 3.18 3.80 3.80
1.58 3.23 3.42 3.42 1.48 2.75 3.40 3.42
1.42 2.89 3.09 3.09 1.26 2.37 3.00 3.09
1.28 2.60 2.80 2.80 1.09 2.03 2.66 2.80
1.16 2.35 2.55 2.55 0.95 1.76 2. 37 2.55
1.05 2.14 2.34 2.34 0.83 1.53 2.11 2.34
0.96 1.95 2.15 2.15 0.73 1.33 1.90 2.15
0.88 1.78 1.98 1.98 0.64 1.17 1.71 1.97
0.81 1.63 1.83 1.83 0.57 1.03 1.54 1.79
0.74 1.50 1.70 1.70 0.51 0.92 1.39 1.63
0.70 1.45 1.64 1.69 0.47 0.83 1.29 1.56
0.64 1.34 1.51 1.58 0.42 0.74 1.15 1.42
0.60 1.24 1.40 1.47
0.67 1.03 1.30
0.55 1.15 1.30 1.37
0.60 0.92 1.19
0.51 1.07 1.20 1.29
0.54 0.83 1.09
0.48 1.00 1.12 1.21
0.49 0.75 1.01

Load
for
defl'n

span/150

21.73
16.20
12.38
9.67
7.70
6.22
5.10
4.25
3.58
3.05
2.63
2.28
1.97
1.72
1.51
1.33
1.18
1.05
0.94
0.85
0.76
0.70
0.64
0.58
0.53
0.48
0.44

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
11400
11700

0.60 0.60
0.54 0.60 0.39
0.70 0.76 0.81
0.50 0.66 0.33 0.45 0.93 1.04 1.14
0.44 0.68 0.92 0.41
0.56 0.57
0.49 0.57 0.36
0.65 0.71 0.76
0.46 0.61 0.30 0.42 0.87 0.97 1.07
0.40 0.62 0.85 0.38
0.53 0.54
0.45 0.54 0.33
0.61 0.66 0.72
0.42 0.56 0.28
0.81 0.91 1.01
0.57 0.78 0.35
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL150.2

zeds & cees


purlins & girts
56

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span

End span
Span (mm)

Span (mm)

Span (mm)

Span (mm)
Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Four lapped span: Z200)15 (kN/m


IN

OU

Bridging >

1, 2, 3

Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

10.05
8.62
6.93
5.67
4.72
3.98
3.40
2.92
2.53
2.21
1.95
1.73
1.54
1.38
1.24
1.13
1.02
0.93
0.85
0.78
0.71
0.65
0.60
0.56
0.51
0.48
0.45

10.05
8.62
7.47
6.53
5.74
5.08
4.53
4.05
3.64
3.28
2.91
2.60
2.33
2.11
1.91
1.74
1.60
1.47
1.35
1.25
1.16
1.16
1.08
1.00
0.94
0.88
0.82

10.05
8.62
7.47
6.53
5.74
5.08
4.53
3.69
3.02
2.50
2.09
1.76
1.50
1.28
1.07
0.93
0.82
0.72
0.64
0.57
0.51
0.47
0.42

10.05
8.62
7.47
6.53
5.74
5.08
4.53
4.05
3.64
3.28
2.91
2.60
2.33
2.11
1.89
1.67
1.48
1.30
1.14
1.01
0.90
0.83
0.74
0.76
0.06
0.45
0.74

10.05
8.62
7.47
6.53
5.74
5.08
4.53
4.05
3.64
3.28
2.91
2.60
2.33
2.11
1.91
1.74
1.60
1.47
1.35
1.25
1.16
1.16
1.06
0.97
0.89
0.81
0.73

10.05
8.62
7.47
6.53
5.74
5.08
4.53
4.05
3.64
3.28
2.91
2.60
2.33
2.11
1.91
1.74
1.60
1.47
1.35
1.25
1.16
1.16
1.08
1.00
0.94
0.88
0.82

11100
11400
11700
12000

0.42

Load for
deflection
span/150
24.69
18.40
14.07
10.99
8.75
7.07
5.79
4.81
4.03
3.42
2.92
2.51
2.18
1.91
1.70
1.53
1.37
1.24
1.12
1.02
0.93
0.86
0.78
0.71
0.65
0.60
0.55

Four lapped span: Z200)15/2002 (kN/m


IN

T OU

1, 2, 3

2, 3

11.35
9.60
8.16
6.55
5.37
4.47
3.78
3.24
2.80
2.44
2.15
1.90
1.69
1.52
1.36
1.23
1.12
1.02
0.93
0.85
0.78
0.71
0.65
0.60
0.56
0.52
0.48

11.35
9.60
8.22
7.11
6.20
5.45
4.82
4.30
3.85
3.46
3.08
2.75
2.47
2.23
2.02
1.84
1.69
1.55
1.43
1.32
1.22
1.22
1.14
1.06
0.99
0.93
0.87

11.35
9.60
8.22
7.11
6.20
5.45
4.82
4.30
3.85
3.46
2.99
2.58
2.21
1.91
1.65
1.44
1.27
1.12
0.99
0.88
0.79
0.70
0.64
0.58
0.53
0.48
0.44

11.35
9.60
8.22
7.11
6.20
5.45
4.82
4.30
3.85
3.46
3.08
2.75
2.47
2.23
2.02
1.84
1.69
1.55
1.43
1.32
1.22
1.21
1.10
1.00
0.91
0.83
0.75

11.35
9.60
8.22
7.11
6.20
5.45
4.82
4.30
3.85
3.46
3.08
2.75
2.47
2.23
2.02
1.84
1.69
1.55
1.43
1.32
1.22
1.22
1.14
1.06
0.99
0.93
0.87

Load for
deflection
span/150
44.18
32.87
25.09
19.58
15.57
12.57
10.30
8.54
7.16
6.07
5.24
4.55
3.98
3.50
3.10
2.75
2.44
2.18
1.96
1.76
1.60
1.47
1.34
1.22
1.12
1.02
0.94

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

57

zeds & cees


purlins & girts

0.78
0.34
0.66
0.78
0.51
0.45
0.82
0.40
0.68
0.82
0.86
0.73
1
0.6
0.73
0.47
0.42
0.77
0.36
0.77
0.80
0.69
5
0.5
0.69
0.44
0.37
0.75
0.73
0.73
0.65
1
0.5
0.65
0.41
0.96
0.35
0.69
0.68
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL200.1

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span

End span
Span (mm)

Span (mm)

Span (mm)

Span (mm)
Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Four lapped span: Z20019)(kN/m


IN
Bridging >

Span 3000 14.21


(mm) 3300 11.11
3600 8.92
3900 7.31
4200 6.09
4500 5.13
4800 4.36
5100 3.73
5400 3.23
5700 2.82
6000 2.48
6300 2.20
6600 1.96
6900 1.75
7200 1.58
7500 1.43
7800 1.30
8100 1.18
8400 1.08
8700 0.99
9000 0.91
9300 0.86
9600 0.79
9900 0.73
10200 0.68
10500 0.63
10800 0.59

Fou4
r lapped span: Z2002 )(kN/m

O UT

2,3

18.71
16.38
13.72
11.63
9.99
8.66
7.56
6.52
5.68
5.00
4.43
3.95
3.55
3.21
2.91
2.65
2.43
2.23
2.06
1.91
1.77
1.73
1.59
1.48
1.37
1.27
1.19

18.71
16.38
13.72
11.63
9.99
8.66
7.56
6.52
5.68
5.00
4.43
3.95
3.55
3.21
2.91
2.65
2.43
2.23
2.06
1.91
1.77
1.76
1.64
1.53
1.43
1.34
1.26

18.71
16.38
13.72
11.63
9.77
8.01
6.48
5.10
4.22
3.53
2.99
2.55
2.19
1.88
1.62
1.40
1.22
1.07
0.94
0.83
0.73
0.67
0.59
0.53
0.47
0.43

18.71
16.38
13.72
11.63
9.99
8.66
7.56
6.52
5.68
5.00
4.43
3.95
3.55
3.12
2.75
2.42
2.12
1.87
1.60
1.43
1.28
1.20
1.08
0.98
0.89
0.81
0.73

18.71
16.38
13.72
11.63
9.99
8.66
7.56
6.52
5.68
5.00
4.43
3.95
3.55
3.21
2.91
2.65
2.43
2.23
2.06
1.91
1.77
1.70
1.55
1.41
1.28
1.16
1.05

18.71
16.38
13.72
11.63
9.99
8.66
7.56
6.52
5.68
5.00
4.43
3.95
3.55
3.21
2.91
2.65
2.43
2.23
2.06
1.91
1.77
1.76
1.64
1.53
1.43
1.34
1.26

Load
for
defl'n

IN

OT
U

span/150

35.18
26.22
20.05
15.66
12.46
10.07
8.26
6.85
5.75
4.87
4.16
3.58
3.12
2.74
2.41
2.14
1.91
1.71
1.54
1.39
1.26
1.16
1.06
0.97
0.89
0.82
0.75

18.71
14.52
11.35
9.10
7.44
6.19
5.23
4.46
3.85
3.35
2.94
2.60
2.32
2.08
1.87
1.69
1.54
1.40
1.28
1.17
1.08
1.01
0.93
0.87
0.80
0.75
0.70

18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.26
6.37
5.63
5.01
4.49
4.04
3.65
3.32
3.02
2.77
2.54
2.34
2.27
2.09
1.94
1.80
1.68
1.56

18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.27
6.44
5.75
5.16
4.66
4.23
3.86
3.53
3.25
2.99
2.77
2.57
2.56
2.38
2.21
2.05
1.91
1.78

18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.27
6.44
5.75
5.16
4.66
4.23
3.86
3.53
3.25
2.99
2.77
2.57
2.56
2.38
2.22
2.08
1.95
1.83

18.71
17.04
15.65
14.47
13.33
11.06
9.12
7.40
6.06
5.02
4.21
3.55
3.00
2.55
2.18
1.88
1.63
1.42
1.25
1.10
0.98
0.89
0.79
0.71
0.64
0.58
0.52

18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.27
6.33
5.53
4.85
4.28
3.80
3.38
3.00
2.67
2.35
2.08
1.85
1.71
1.54
1.38
1.24
1.11
1.00

18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.27
6.44
5.75
5.16
4.66
4.23
3.86
3.53
3.24
2.94
2.67
2.44
2.35
2.14
1.96
1.80
1.65
1.51

3
18.71
17.04
15.65
14.47
13.45
12.57
10.99
9.48
8.26
7.27
6.44
5.75
5.16
4.66
4.23
3.86
3.53
3.25
2.99
2.77
2.57
2.56
2.38
2.22
2.04
1.89
1.75

Four lapp
9ed span: Z2501 )(kN/m
Load
for
defl'n

IN

O UT

Load
for
defl'n

span/150

2,3

span/150

46.45
34.62
26.47
20.68
16.45
13.30
10.90
9.05
7.59
6.43
5.49
4.73
4.14
3.65
3.23
2.87
2.57
2.31
2.07
1.86
1.68
1.55
1.41
1.29
1.18
1.08
1.00

16.52
14.29
11.46
9.36
7.75
6.48
5.50
4.70
4.07
3.55
3.12
2.76
2.46
2.20
1.98
1.79
1.63
1.48
1.36
1.24
1.14
1.07
0.99
0.92
0.85
0.79
0.74

16.52
14.29
12.49
11.01
9.78
8.73
7.84
7.07
6.40
5.82
5.31
4.86
4.46
4.07
3.70
3.37
3.08
2.83
2.61
2.42
2.24
2.23
2.08
1.94
1.81
1.68
1.57

16.52
14.29
12.49
11.01
9.78
8.73
7.84
7.07
6.40
5.82
5.31
4.86
4.46
4.07
3.70
3.37
3.08
2.83
2.61
2.42
2.24
2.23
2.08
1.94
1.81
1.70
1.59

16.52
14.29
12.49
11.01
9.78
8.73
7.84
6.78
5.59
4.66
3.93
3.34
2.86
2.44
2.09
1.81
1.57
1.37
1.21
1.06
0.94
0.85
0.75
0.67
0.60
0.54
0.49

16.52
14.29
12.49
11.01
9.78
8.73
7.84
7.07
6.40
5.82
5.31
4.86
4.46
4.07
3.68
3.22
2.81
2.40
2.12
1.89
1.69
1.58
1.42
1.28
1.16
1.05
0.94

16.52
14.29
12.49
11.01
9.78
8.73
7.84
7.07
6.40
5.82
5.31
4.86
4.46
4.07
3.70
3.37
3.08
2.83
2.61
2.42
2.24
2.23
2.08
1.88
1.70
1.54
1.35

16.52
14.29
12.49
11.01
9.78
8.73
7.84
7.07
6.40
5.82
5.31
4.86
4.46
4.07
3.70
3.37
3.08
2.83
2.61
2.42
2.24
2.23
2.08
1.94
1.81
1.70
1.59

57.13
42.58
32.56
25.43
20.24
16.36
13.41
11.13
9.33
7.90
6.75
5.81
5.04
4.40
3.86
3.40
3.02
2.71
2.45
2.23
2.04
1.88
1.72
1.58
1.46
1.34
1.23

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100
11400
11700
12000

0.55 1.11 1.18


0.66 0.93 1.18 0.70 0.65 1.46 1.66 1.72 0.47 0.91 1.38 1.63 0.92 0.69 1.46 1.50 0.44 0.85 1.24 1.50
0.52 1.04 1.11
0.60 0.85 1.10 0.64 0.61 1.36 1.55 1.62 0.43 0.82 1.25 1.51 0.85 0.64 1.36 1.41 0.40 0.77 1.13 1.41
0.48 0.97 1.05
0.55 0.79 1.02 0.60 0.57 1.27 1.46 1.53
0.75 1.15 1.41 0.78 0.60 1.27 1.33
0.70 1.04 1.33
0.45 0.91 0.99
0.50 0.72 0.95 0.56 0.54 1.19 1.37 1.45
0.68 1.05 1.31 0.73 0.56 1.18 1.26
0.64 0.96 1.26
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.

FL200.2/250.1

1.14
1.05
0.97
0.91

zeds & cees


purlins & girts
58

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span

End span
Span (mm)

Span (mm)

Span (mm)

Span (mm)
Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Four lapped span: Z250)24 (kN/m

Four lapped span: Z25019)/25024 (kN/m


Bridging >

2, 3

Load
for
deflect'n
span/150

Span 3000
(mm) 3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800

18.72
15.97
12.77
10.19
8.32
6.91
5.82
4.97
4.29
3.74
3.28
2.90
2.59
2.31
2.08
1.88
1.71
1.56
1.42
1.30
1.20
1.13
1.04
0.96
0.89
0.83
0.77

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
6.10
5.54
5.05
4.63
4.19
3.80
3.47
3.17
2.91
2.69
2.49
2.31
2.30
2.14
1.99
1.86
1.75
1.64

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
6.10
5.54
5.05
4.63
4.19
3.80
3.47
3.17
2.91
2.69
2.49
2.31
2.30
2.14
1.99
1.86
1.75
1.64

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
5.45
4.60
3.91
3.36
2.90
2.53
2.21
1.93
1.69
1.49
1.32
1.17
1.08
0.96
0.86
0.77
0.70
0.63

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
6.10
5.54
5.05
4.63
4.19
3.80
3.47
3.17
2.91
2.61
2.31
2.06
1.86
1.68
1.52
1.37
1.25
1.14

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
6.10
5.54
5.05
4.63
4.19
3.80
3.47
3.17
2.91
2.69
2.49
2.31
2.30
2.14
1.99
1.86
1.75
1.64

18.72
15.97
13.79
12.03
10.58
9.37
8.35
7.49
6.74
6.10
5.54
5.05
4.63
4.19
3.80
3.47
3.17
2.91
2.69
2.49
2.31
2.30
2.14
1.99
1.86
1.75
1.64

76.40
56.91
43.50
33.97
27.02
21.84
17.90
14.85
12.46
10.55
9.01
7.76
6.73
5.87
5.16
4.58
4.09
3.66
3.30
2.98
2.70
2.49
2.27
2.07
1.89
1.74
1.60

IN

OU

IN

OU

18.71
17.04
14.20
11.35
9.27
7.70
6.48
5.53
4.76
4.14
3.63
3.21
2.86
2.56
2.30
2.08
1.89
1.72
1.57
1.44
1.33
1.23
1.14
1.06
0.98
0.91
0.85

18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.62
5.97
5.36
4.84
4.39
4.00
3.66
3.36
3.09
2.97
2.74
2.53
2.34
2.17
2.02

18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.62
5.98
5.42
4.95
4.53
4.16
3.84
3.55
3.29
3.28
3.05
2.85
2.66
2.49
2.34

18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.62
5.98
5.42
4.95
4.53
4.16
3.84
3.55
3.29
3.28
3.05
2.85
2.66
2.49
2.34

18.71
17.04
15.65
14.47
13.45
12.57
11.80
9.68
7.90
6.53
5.47
4.60
3.87
3.28
2.80
2.41
2.09
1.82
1.59
1.40
1.23
1.12
1.00
0.89
0.80
0.72
0.65

18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.49
5.72
5.05
4.48
3.95
3.48
3.07
2.71
2.41
2.22
1.99
1.78
1.59
1.43
1.28

18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.62
5.98
5.42
4.95
4.53
4.16
3.84
3.55
3.26
3.13
2.85
2.61
2.38
2.17
1.97

3
18.71
17.04
15.65
14.47
13.45
12.57
11.80
11.12
10.51
9.31
8.26
7.37
6.62
5.98
5.42
4.95
4.53
4.16
3.84
3.55
3.29
3.28
3.05
2.85
2.66
2.49
2.34

Load
for
deflect'n
span/150

78.80
58.73
44.90
35.08
27.91
22.56
18.50
15.35
12.87
10.90
9.31
8.01
6.95
6.06
5.32
4.70
4.19
3.75
3.38
3.06
2.77
2.55
2.33
2.13
1.96
1.80
1.65

SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

0.72
1.54
1.54
0.57
1.04
1.53
1.54
1.47
0.80
1.88
2.20
2.20
0.59
1.16
1.79
2.18
1.52
0.67
1.45
1.45
0.52
0.95
1.40
1.45
1.36
0.74
1.75
2.07
2.08
0.53
1.05
1.63
2.02
1.40
0.63
1.37
1.37
0.47
0.87
1.28
1.37
1.26
0.70
1.64
1.94
1.96
0.49
0.95
1.49
1.88
1.30
0.59
1.28
1.30
0.43
0.80
1.17
1.30
1.17
0.65
1.53
1.82
1.85
0.44
0.87
1.36
1.75
1.20
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL250.2

59

zeds & cees


purlins & girts

11100
11400
11700
12000

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span
Span (mm)

End span
Span (mm)

Span (mm)

Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Span (mm)

zeds & cees


purlins & girts
60

Limit state capacity tables


Four lapped spans
Four lapped spans

Lap

End span
Span (mm)

Overall purlin length =

Overall purlin length =

span + 70 mm + (Lap/2)

span + 70 mm + (Lap/2)

Span (mm)

zeds & cees


purlins & girts

Span (mm)

61

Span (mm)

End span

Limit state capacity tables


Cantilever spans
Cantilever spans

End span (mm)

Cantilever (mm)

1. The capacities are for cantilevers with single end


span. The ends of the cantilevers are stabilised
by fascias, bridging, barge boards, perimeter
beams or similar structural members.
2. Bold capacities require grade 8.8 purlin bolts.
3. Bridging shown is for end spans only.
4. See also Design notes for capacity tables

zeds & cees


purlins & girts
62

63

zeds & cees


purlins & girts

Product Descriptions
All descriptions, specifications, illustrations, drawings,
data, dimensions and weights contained in this catalogue,
all technical literature and websites containing information
from Lysaght are approximations only.
They are intended by Lysaght to be a general description
for information and identification purposes and do not
create a sale by description. Lysaght reserves the right at
any time to:
(a) supply Goods with such minor modifications from its
drawings and specifications as it sees fit; and
(b) alter specifications shown in its promotional literature
to reflect changes made after the date of such
publication.

Disclaimer, warranties and limitation of liability


This publication is intended to be an aid for all
trades and professionals involved with specifying
and installing Lysaght products and not to be a
substitute for professional judgement.
Terms and conditions of sale available at local
Lysaght sales offices.
Except to the extent to which liability may not
lawfully be excluded or limited, BlueScope Steel
Limited will not be under or incur any liability to you
for any direct or indirect loss or damage (including,
without limitation, consequential loss or damage
such as loss of profit or anticipated profit, loss of use,
damage to goodwill and loss due to delay) however
caused (including, without limitation, breach of
contract, negligence and/or breach of statute),
which you may suffer or incur in connection with this
publication.
Copyright BlueScope Steel Limited 14 January,
2014

zeds & cees


purlins & girts

www.lysaght.com
Technical enquiries: steeldirect@bluescopesteel.com
or call 1800 641 417
Please check the latest information which is always available on our website.
lysaght, truecore, zincalume, hook-lok and BlueScope are registered
trade marks of BlueScope Steel Limited, ABN 16 000 011 058. The LYSAGHT range of
products is exclusively made by or for BlueScope Steel Limited trading as Lysaght.
PM 500 14/1/14

3 2 0 0 7 5

0 7 6 2 3 8

64

Potrebbero piacerti anche