Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Belt Cleaner
BENEFITS
Controls Carryback At The Head Pulley
Effective cleaning system provides immediate relief
from conveyor belt carryback.
Effective Cleaning With Low Pressure
Three-inch wide (76-mm) blades need only low pressure
against the belt to maintain cleaning contact.
Gentle For Belt And Splices
Light cleaning touch reduces risk of damage, even on
belts with rips or ugly splices.
Long Service Life
Low-pressure cleaning means urethane blades provide
lasting service. For more challenging conditions, specify
tungsten carbide inserts.
SPECIFICATIONS
MARTIN
SAF-2 Belt
Cleaner with
Operating Temperature
F (C)
Standard
Clamp Mount
600 (3.0)
Heavy-Duty
Clamp Mount
800 (4.1)
Wear Life*
in. (mm)
Tungsten Carbide: 0.375 (10)
Urethane:
0.75 (19)
0.75 (19)
Clamp Mount
P/N
34000
35391
TECHNICAL DATA
HoW IT WORKS
The MARTIN SAF-2 Cleaner must be installed against
the belt at a point where the belt is supported by the
head pulley or restrained from lifting by a suitable holddown.
Cleaner assemblies with Urethane Blades include two
gauge blades; cleaners with Tungsten Carbide Blades
use one gauge blade.
The cleaner is tensioned by pushing it up so the blades
contact the belt, and then slightly higher. The assembly is raised until the longer gauge blades of urethane
assemblies, or the individual gauge blades of tungsten
carbide blade assemblies touch the belt. This deflects
the cleaning blades in the direction of belt travel and
ensures desired cleaning pressure against the belt.
As blades wear, the springy resilience of the urethane
allows the blades to self-adjust, standing taller to
maintain performance and minimize maintenance.
Application Guidelines
The MARTIN SAF-2 Belt Cleaner can be installed with
the Standard Clamp Mount on enclosed chute work or
open pulleys on conveyors with belt speeds up to 600
fpm (3.0 m/sec).
TECHNICAL DATA
MARTIN SAF-2 Hanger Mount
TECHNICAL DATA
No. of Belt Coverage
Blades A in. (mm)
Belt Width*
in. (mm)
Mainframe Length**
B in. (mm)
18 (400-500)
12 (305)
48 (1219)
31 (14.1)
24 (500-650)
18 (457)
54 (1372)
37 (16.8)
30 (650-800)
24 (610)
60 (1524)
43 (19.5)
36 (800-1000)
10
30 (762)
66 (1676)
49 (22.2)
42 (1000-1200)
12
36 (914)
72 (1829)
55 (24.9)
48 (1200-1400)
14
42 (1067)
78 (1961)
61 (27.7)
54 (1400-1600)
16
48 (1219)
84 (2134)
67 (30.4)
60 (1600-1800)
18
54 (1372)
90 (2286)
73 (33.1)
72 (1800-2000)
22
66 (1676)
96 (2438)
85 (38.6)
84 (2000-2200)
26
78 (1981)
114 (2896)
97 (44.0)
96 (2200-2400)
30
90 (2286)
126 (3200)
109 (49.4)
3.00
(76)
Ship Weight
lb. (kg)
5.00
(127)
2.00
(59)
4.00
(102)
16.50
(419)
Metric belt widths are standard industry belting sizes rather than conversions.
Each assembly also includes Gauge Blades. Cleaners with Urethane Blades
include four Gauge Bladestwo on each end of the mainframe. Cleaners with
Tungsten Carbide Blades include two Gauge Bladesone on each end of the
mainframe.
6.50
(165)
2.00
(51)
2.00
(51)
11.05
(281)
5.06
(129)
DIM B
3.16 (80)
11.25
(286)
3.50 (89)
.06 (2)
13.81
(351)
MARTIN SAF-2
Mainframe
13.75
(349)
6.00
(152)
MARTIN
SAF-2
Mainframe
11.00
(279)
2.88
(73)
TECHNICAL DATA
ORDER INFORMATION
Item
Part Number
33847-XXXX
Replacement Blades
Urethane
38230-U
Tungsten Carbide
38230-T
38230-S
33845-01
33845-02
34000
35391
35416
34233-HD
35388
* MARTIN CYA Extended-Height Steel Door (P/N 35388) is suitable for use with
MARTIN SAF-2 Heavy-Duty Clamp Mount (P/N 35391). It is not suitable for
application with MARTIN SAF-2 Standard Clamp Mount (P/N 34000).
NOMENCLATURE
XXXXX - XX X XX X
U.S. patents 5,310,042 and 5,704,167 corresponding foreign patents and patents pending,
Registered trademark of Martin Engineering
Company in the U.S. and other select locations.
Additional information can be obtained at
www.martin-eng.com/trademarks.
TENSIONER
T for Standard Clamp Mount (cover door included)
HD for Heavy-Duty Clamp Mount (cover door included)
Blank for No Tensioner