Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
03/12/15, 4:15 PM
Home (http://www.aasteel.com/)
About Us (http://www.aasteel.com/about-us.html)
Products/Industries (http://www.aasteel.com/products-industries.html)
Services (http://www.aasteel.com/services.html)
Galleries (http://www.aasteel.com/gallery-albums.html)
Contact Us
Carbon Steel Pressure Vessel Plates for Moderate and Lower Temperature Service
Steel Products by Application
PVQ Carbon & Alloy
(http://www.aasteel.com/pvqcarbon-and-alloy.html)
Severe Sour Service
(http://www.aasteel.com/severesour-service-tuf-37-hic.html)
SA 516 (Vacuum Degassed /
TUF 37)
(http://www.aasteel.com/sa-516(tuf-37).html)
SA 516 (Hydrogen Induced
Cracking - HIC)
(http://www.aasteel.com/sa-516(vacuum-degassed-tuf-37).html)
Overview
This material is restricted to extra low sulfur, phosphorus, and other residual elements. HIC tests are performed on a per
heat / thickness basis in association with NACE Standard TM0284. CLR (Crack Length Ratio), CTR (Crack Thickness
Ratio), and CSR (Crack Sensitivity Ratio) yield excellent results in keeping with the quality of the steel product.
Download SA-516 Chemical and Tensile Requirements PDF (154 KB) (downloads/SAS_SA-516_SA-285_SA283.pdf)
Chemical Requirements
Composition %
Composition %
Composition %
Composition %
Grade 55
Grade 60
Grade 65
Grade 70
(Grade 380)
(Grade 415)
(Grade 450)
(Grade 485)
0.18
0.21
0.24
0.27
Elements
Carbon, maxA
0.20
0.23
0.26
0.28
0.22
0.25
0.28
0.30
0.24
0.27
0.29
0.31
Military Grades
(http://www.aasteel.com/militarygrades.html)
0.26
0.27
0.29
0.31
0.60-0.90
0.60-0.90
0.85-1.20
0.85-1.20
(mailto:em
Location
Manganese, max
1/2 (12.5) and under:
Heat analysisB
http://www.aasteel.com/sa-516-(vacuum-degassed-tuf-37).html
Page 1 of 2
SA 516 (Hydrogen Induced Cracking - HIC)-Carbon Steel Pressure Vessel Plates for Moderate and Lower Temperature Service
flat-bar.html)
Product analysisB
03/12/15, 4:15 PM
0.55-0.98
0.55-0.98
0.79-1.30
0.79-1.20
Heat analysis
0.60-1.20
0.85-1.20
0.85-1.20
0.85-1.20
Product analysis
0.55-1.30
0.79-1.30
0.79-1.30
0.79-1.30
Phosphorus, max A
0.035
0.035
0.035
0.035
Sulfur, max A
0.04
0.04
0.04
0.04
Heat analysis
0.15-0.40
0.15-0.40
0.15-0.40
0.15-0.40
Product analysis
0.13-0.45
0.13-0.45
0.13-0.45
0.13-0.45
Silicon
AApplies
BGrade
60 plates 1/2 in. (12.5 mm) and under in thickness may have 0.85-1.20% manganese on heat analysis and 0.79-
Tensile Requirements
Grade 55
Grade 60
Grade 65
Grade 70
(Grade 380)
(Grade 415)
(Grade 450)
(Grade 485)
55-75(380-515)
60-80(415-550)
65-85(450-585)
70-90(485-620)
30(205)
32(220)
35(240)
38(260)
23A
21A
19A
17A
27A
25A
23A
21A
ASee
BDetermined
Copyright 2015. American Alloy Steel. All Rights Reserved. Contact: email@aasteel.com (mailto:email@aasteel.com)
http://www.aasteel.com/sa-516-(vacuum-degassed-tuf-37).html
Page 2 of 2