Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hardware Description
Version: V2.0.1
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2014 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
2014-06-30
First edition
SJ-20140312095717-004|2014-06-30 (R1.0)
Contents
About This Manual ......................................................................................... I
Chapter 1 Shelves ...................................................................................... 1-1
1.1 ETSI 21-Inch Shelf ............................................................................................. 1-1
1.2 IEC 19-Inch Shelf ............................................................................................... 1-4
Glossary .......................................................................................................... I
I
SJ-20140312095717-004|2014-06-30 (R1.0)
II
SJ-20140312095717-004|2014-06-30 (R1.0)
Intended Audience
This manual is intended for:
l
l
l
Planning engineers
Installation supervision engineers
Debugging engineers
Chapter 2, Cards
Chapter 3, Cables
Conventions
This manual uses the following conventions.
Note: provides additional information about a topic.
I
SJ-20140312095717-004|2014-06-30 (R1.0)
II
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 1
Shelves
The ZXA10 C300 uses the following two types of shelves:
l
l
A 19-inch shelf and a 21-inch shelf share the same cards excluding backplanes and fans.
Table of Contents
ETSI 21-Inch Shelf .....................................................................................................1-1
IEC 19-Inch Shelf .......................................................................................................1-4
1-1
SJ-20140312095717-004|2014-06-30 (R1.0)
Configuration
The shelf is divided into two areas: service card area (lower) and fan area (upper, optional).
l
1-2
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 1 Shelves
Card Type
0/1
2 to 9
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
10/11
12 to 19
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
20
21/22
Uplink card
Fan area
The fan area is a plug-in card with 1U height and 21-inch width.
It provides the system with cool wind in ventilating way. Fan speed can be adjusted
according to the system temperature.
Technical Specifications
Table 1-2 lists technical specifications of the 21-inch shelf.
Table 1-2 21-Inch Shelf Technical Specifications
Item
Specification
Dimensions
Weight
14 kg (Empty)
36.6 kg (Full configuration)
1-3
SJ-20140312095717-004|2014-06-30 (R1.0)
When the 19-inch shelf is installed in a B6060-22F cabinet, its mounting ears are close to
the front edge, see Figure 1-4.
1-4
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 1 Shelves
Configuration
The shelf is divided into two areas: service card area (lower) and fan area (upper, optional).
l
1-5
SJ-20140312095717-004|2014-06-30 (R1.0)
Card Type
0/1
2 to 9
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
10/11
12 to 17
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
18
19/20
Uplink card
Fan area
The fan area is a plug-in card with 1U height and 19-inch width.
It provides the system with cool wind in ventilating way. Fan speed can be adjusted
according to the system temperature.
Technical Specifications
Table 1-4 lists technical specifications of the 19-inch shelf.
Table 1-4 19-Inch Shelf Technical Specifications
Item
Specification
Dimensions
Weight
12.5 kg (Empty)
34.2 kg (Full configuration)
1-6
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2
Cards
The ZXA10 C300 shelf is composed of cards and a fan box. Table 2-1 lists the cards and
fan box.
Table 2-1 Card List
Card Type
Name
Description
Interface
Switching and
SCTM
1 out-of-band NM interface
SCXN
1 serial interface
1 SD card interface
1 mirroring interface
control card
PON interface
card
Ethernet
GTGH
16 GPON interfaces
GTGO
8 GPON interfaces
GTXO
8 XG-PON1 interfaces
XUTQ
uplink card
HUVQ
interfaces
interfaces
4 GE optical interfaces
uplink card
GUSQ
interfaces
card
Ethernet
GDFO
interface card
P2P interface
card
FTGK
card
2-1
SJ-20140312095717-004|2014-06-30 (R1.0)
Card Type
Name
Description
Interface
TDM interface
CTLA
CTUB
32 E1 unbalanced interfaces
card
interface card
Common
CICG
interface card
input interface
l
2 BITS/1PPS+TOD clock
1 BITS/1PPS+TOD clock
output interface
1 out-of-band NM interface
1 temperature sensor
interface
Backplane
MWIA/R
19-inch backplane
21-inch backplane
MWIA
MWEA/R
MWEA
Power card
PRWG
1 power interface
2 RJ-45 interfaces
(reserved)
Fan box
FAN-19
(FCWB)
3 fans.
FAN-19
(FCWB)
10 fans.
FAN-21
(FCWD)
4 fans.
FAN-21
(FCWD)
10 fans.
Table of Contents
Switching and Control Cards ......................................................................................2-3
PON Interface Cards ..................................................................................................2-6
Ethernet Uplink Cards ..............................................................................................2-11
Ethernet Interface Card ............................................................................................2-19
2-2
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
SCTM: supports 1.28 Tbps switching capacity and 288 K MAC address table.
SCXN: supports 480 Gbps switching capacity, 64 K MAC address table, and VoIP
function (with VoIP daughter-card).
Panel
Figure 2-1 and Figure 2-2 show the switching and control card panels.
Figure 2-1 SCTM Panel
Indicators
Table 2-2 describes the indicators of the switching and control cards.
Table 2-2 Indicator Description for Switching and Control Cards
Indicator
Status
Description
RUN
LED is OFF.
(0.5 Hz).
is correct.
SJ-20140312095717-004|2014-06-30 (R1.0)
Indicator
Status
Description
Hz).
M/S
HDD
LED is OFF.
ACTi (i = 14)
LED is OFF.
Interfaces
Table 2-3 describes the interfaces of the switching and control cards.
Table 2-3 Interface Description for Switching and Control Cards
Interface
Description
GE1GE4/XG1XG4
SD
CLI
10/100M
DIAG
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-3 shows the principle diagram of the switching and control cards.
2-4
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Table 2-4 describes the module functions of the switching and control cards.
Table 2-4 Module Functions of Switching and Control Cards
Module
Function
Switching module
Clock/time module
Technical Specifications
Table 2-5 lists technical specifications of the switching and control cards.
Table 2-5 Technical Specifications of Switching and Control Cards
Item
Specification
Power consumption
Dimensions
Weight
SCTM: 1.075 kg
SCXN: 1.132 kg
Static power consumption: the system is powered on and all user ports are deactivated.
2-5
SJ-20140312095717-004|2014-06-30 (R1.0)
Maximum power consumption: the system is powered on and all user ports are activated.
Typical power consumption: the system is powered on and 50% user ports are activated.
Panel
Figure 2-4 and Figure 2-5and show the GPON interface card panels.
Figure 2-4 GTGH Panel
Indicators
Table 2-6 describes the indicators of the GPON interface cards.
Table 2-6 Indicator Description for GPON Interface Cards
Indicator
Status
RUN
LED is OFF.
Description
irregularly.
management server.
2-6
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Indicator
Status
Description
(0.5 Hz).
Red LED is ON.
Hz).
Yellow LED flashes slowly
(0.5 Hz).
ACTi (i =
LED is OFF.
116)
Interfaces
GPON interface cards provide 16/8 GPON interfaces.
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-6 shows the principle diagram of the GPON interface cards.
2-7
SJ-20140312095717-004|2014-06-30 (R1.0)
Function
module
GPON MAC module
TM module
Clock/time module
Technical Specifications
Table 2-8 lists technical specifications of the GPON interface cards.
Table 2-8 Technical Specifications of GPON Interface Cards
Item
Specification
Power consumption
Dimensions
Weight
GTGH: 1.000 kg
GTGO: 0.925 kg
2-8
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Panel
Figure 2-7 show the GTXO panel.
Figure 2-7 GTXO Panel
Indicators
Table 2-9 describes the indicators of the GTXO card.
Table 2-9 Indicator Description for GTXO Card
Indicator
Status
RUN
LED is OFF.
Description
irregularly.
management server.
(0.5 Hz).
Red LED is ON.
Hz).
Yellow LED flashes slowly
(0.5 Hz).
ACTi (i =
LED is OFF.
18)
2-9
SJ-20140312095717-004|2014-06-30 (R1.0)
Interfaces
The GTXO card provides 8 XG-PON1 interfaces.
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-8 shows the principle diagram of the GTXO card.
Figure 2-8 Principle Diagram of GTXO Card
Function
module
XG-PON1 MAC module
TM module
Clock/time module
Technical Specifications
Table 2-11 lists technical specifications of the GTXO card.
2-10
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Specification
Power consumption
Dimensions
Weight
1.12 kg
Panel
Figure 2-9 and Figure 2-10 show the 10GE Ethernet uplink card panels.
Figure 2-9 XUTQ Panel
Indicators
Table 2-12 describes the indicators for the 10GE Ethernet uplink cards.
2-11
SJ-20140312095717-004|2014-06-30 (R1.0)
Status
Description
RUN
LED is OFF.
irregularly.
(0.5 Hz).
Red LED is ON.
Hz).
Yellow LED flashes slowly
(0.5 Hz).
ACTi (i =
14)
link failure.
Green LED is ON.
Interfaces
The 10GE Ethernet uplink cards provide four 10GE Ethernet interfaces.
Principle Diagram
Figure 2-11 shows the principle diagram of the 10GE Ethernet uplink cards.
2-12
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Table 2-13 describes the module functions of the 10GE Ethernet uplink cards.
Table 2-13 Module Function of 10GE Ethernet Uplink Cards
Module
Function
module
Technical Specifications
Table 2-14 lists technical specifications of the 10GE Ethernet uplink cards.
Table 2-14 Technical Specifications of 10GE Ethernet Uplink Cards
Item
Power consumption
Specification
XUTQ: 22 W (static/maximum), 20 W (typical)
XUVQ: 25 W (static/maximum), 23 W (typical)
Dimensions
Weight
XUTQ: 0.514 kg
XUVQ: 0.445 kg
2-13
SJ-20140312095717-004|2014-06-30 (R1.0)
HUTQ: 2-port 10GE and 2-port GE optical interface Ethernet uplink card
HUVQ: 2-port 10GE and 2-port GE optical interface Ethernet uplink card, supports
SynE and IEEE 1588 TC function.
Panel
Figure 2-12 and Figure 2-13 show the 10GE/GE Ethernet uplink card panels.
Figure 2-12 HUTQ Panel
Indicators
Table 2-15 describes the indicators of the 10GE/GE Ethernet uplink cards.
Table 2-15 Indicator Description for 10GE/GE Ethernet Uplink Cards
Indicator
Status
Description
RUN
LED is OFF.
irregularly.
(0.5 Hz).
Red LED is ON.
Hz).
Yellow LED flashes slowly
(0.5 Hz).
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Indicator
Status
Description
XG1/XG2/G-
E1/GE2
failure.
Green LED is ON.
Interfaces
The 10GE/GE Ethernet uplink cards provide two 10GE optical interfaces and two GE
optical interfaces.
Principle Diagram
Figure 2-14 shows the principle diagram of the 10GE/GE Ethernet uplink cards.
Figure 2-14 Principle Diagram of 10GE/GE Ethernet Uplink Cards
Table 2-16 describes the module functions of the 10GE/GE Ethernet uplink cards.
Table 2-16 Module Function of 10GE/GE Ethernet Uplink Cards
Module
Function
module
PHY module
2-15
SJ-20140312095717-004|2014-06-30 (R1.0)
Module
Function
optical module
Technical Specifications
Table 2-17 lists technical specifications of the 10GE/GE Ethernet uplink cards.
Table 2-17 Technical Specifications of 10GE/GE Ethernet Uplink Cards
Item
Specification
Power consumption
15 W (static/maximum), 13 W (typical)
Dimensions
Weight
0.42 kg
GUSQ: 2-port optical and 2-port electrical interface Ethernet uplink card
Two optical interfaces can be GE optical interface (with a GFSD sub-card), or FE
optical interface (with an FFSD sub-card).
Two electrical interfaces are 10 M/100 M/1000 M self-adaptive electrical interfaces
(with a GTSD sub-card).
Panel
Figure 2-15 and Figure 2-16 show the GE Ethernet uplink card panels.
Figure 2-15 GUFQ Panel
2-16
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Indicators
Table 2-18 describes the indicators of the GE Ethernet uplink cards.
Table 2-18 Indicator Description for GE Ethernet Uplink Card
Indicator
Status
Description
RUN
LED is OFF.
irregularly.
(0.5 Hz).
Red LED is ON.
Hz).
Yellow LED flashes slowly
(0.5 Hz).
ACTi (i = 14)
Interfaces
The GE Ethernet uplink cards provide four GE/FE interfaces.
Principle Diagram
Figure 2-17 shows the principle diagram of the GE Ethernet uplink cards.
2-17
SJ-20140312095717-004|2014-06-30 (R1.0)
Table 2-19 describes the module functions of the GE Ethernet uplink cards.
Table 2-19 Module Function of GE Ethernet Uplink Cards
Module
Function
module
GE PHY module
GE/FE optical
module/electrical interface
Technical Specifications
Table 2-20 lists technical specifications of the GE Ethernet uplink cards.
Table 2-20 Technical Specifications of GE Ethernet Uplink Card
Item
Specification
Power consumption
5 W (static/maximum), 4 W (typical)
Dimensions
Weight
GUFQ: 0.506 kg
GUSQ: 0.466 kg
2-18
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Panel
Figure 2-18 shows the GDFO panel.
Figure 2-18 GDFO Panel
Indicators
Table 2-21 describes the indicators of the Ethernet interface card.
Table 2-21 GDFO Indicator Description
Indicator
Status
Description
RUN
LED is OFF.
(0.5 Hz).
Red LED is ON.
Hz).
ACTi (i = 18)
(0.5 Hz).
Interfaces
The GDFO card provides eight GE optical interfaces (1 8).
2-19
SJ-20140312095717-004|2014-06-30 (R1.0)
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-19 shows the principle diagram of the GDFO card.
Figure 2-19 Principle Diagram of GDFO Card
Function
module
Switching module
GE optical module
Technical Specifications
Table 2-23 lists technical specifications of the GDFO card.
Table 2-23 Technical Specifications of GDFO Card
Item
Specification
Power consumption
Dimensions
Weight
0.755 kg
2-20
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Panel
Figure 2-20 shows the FTGK panel.
Figure 2-20 FTGK Panel
Indicator
Table 2-24 describes the indicators of the FTGK card.
Table 2-24 FTGK Indicator Description
Indicator
Status
Description
RUN
LED is OFF.
The card passes the self test, but fails to obtain data
from the switching and control card or NMS.
quickly.
2-21
SJ-20140312095717-004|2014-06-30 (R1.0)
Indicator
Status
Description
LEDi (i =
148)
(ACTIVE).
Interface
The FTGK card provides 48 FE/GE optical interfaces (24 ports, each port provides 2
interfaces).
Principle Diagram
Figure 2-21 shows the principle diagram of the FTGK card.
Figure 2-21 FTGK Principle Diagram
Function
module
Switching module
Clock module
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Technical Specification
Table 2-26 lists technical specifications of the FTGK card.
Table 2-26 FTGK Technical Specification
Item
Specification
Power consumption
Dimensions
Weight
1.51 kg
Panel
Figure 2-22 shows the CTLA panel.
Figure 2-22 CTLA Panel
Indicators
Table 2-27 lists the indicator descriptions for the CTLA card.
Table 2-27 CTLA Indicator Description
Indicator
Status
Description
RUN
LED is OFF.
quickly.
Hz).
2-23
SJ-20140312095717-004|2014-06-30 (R1.0)
Indicator
Status
Description
(0.5 Hz).
MOD
TX/RX
The software version of line card does not match that of the
ON.
is normal.
OFF.
RX Red LED is ON.
Interfaces
The CTLA card provides two STM-1 interfaces or one STM-4 interface.
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-23 shows the principle diagram of the CTLA card.
2-24
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Function
module
in the card.
SDH/SONET framer
Optical module
Technical Specifications
Table 2-29 lists technical specifications of the CTLA card.
Table 2-29 CTLA Technical Specifications
Item
Specification
Power consumption
35 W (static/maximum), 34 W (typical)
Dimensions
Weight
0.752 kg
2-25
SJ-20140312095717-004|2014-06-30 (R1.0)
Panel
Figure 2-24 shows the CTUB panel.
Figure 2-24 CTUB Panel
Indicators
Table 2-30 describes the indicators of the CTUB card.
Table 2-30 Indicator Description for CTUB Card
Indicator
Status
Description
RUN
LED is OFF.
quickly.
slowly.
Red LED is ON.
(0.5 Hz).
ALM
The software version of line card does not match that of the
LED is OFF.
Tributary is proper.
Interfaces
The CTUB card provides 32-channel unbalanced E1. Each E1 channel has four pins. The
upper two pins are used for receiving and the lower two pins are used for sending.
2-26
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Button
The RST button is used for resetting card.
Principle Diagram
Figure 2-25 shows the principle diagram of the CTUB card.
Figure 2-25 Principle Diagram of CTUB Card
Function
module
in the card.
Implements E1/T1 line CODEC, extracts and restores clock from the
E1/T1 lines.
Technical Specifications
Table 2-32 lists technical specifications of the CTUB card.
2-27
SJ-20140312095717-004|2014-06-30 (R1.0)
Specification
Power consumption
16 W (static/maximum), 14 W (typical)
Dimensions
Weight
0.68 kg
Panel
Figure 2-26 and Figure 2-27 show the common interface card panels.
Figure 2-26 CICG Panel
Indicators
Table 2-33 describes the indicators of the common interface cards.
Table 2-33 Indicator Description of Common Interface Cards
Indicator
Status
Description
RUN
ETH
sending or receiving.
Green LED flashes.
Interfaces
Table 2-34 describes the interfaces of the common interface cards.
2-28
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Description
CLKI1
CLKI2
CLKO/1PPSO
CLKI1/TIMI1
CLKI2/TIMI2
CLKO/TIMO
ETH1
ETH2
ETH
COM
232/485
TEM
HUM
SMO
LIQ
DOR
DIN
DOT
Principle Diagram
Figure 2-28 shows the principle diagram of the common interface cards.
2-29
SJ-20140312095717-004|2014-06-30 (R1.0)
Table 2-35 describes the module functions of the common interface cards.
Table 2-35 Module Function of Common Interface Cards
Module
Function
module
in the card.
Interface module
Clock module
Technical Specifications
Table 2-36 lists technical specifications of the common interface cards.
Table 2-36 Technical Specifications of Common Interface Cards
Item
Specification
Power consumption
5W
Dimensions
Weight
CICG: 0.719 kg
CICK: 0.75 kg
2-30
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Panel
Figure 2-29 shows the PRWG card.
Figure 2-29 PRWG Panel
Indicators
Table 2-37 describes the indicators of the PRWG card.
Table 2-37 PRWG Indicator Description
Indicator
Status
Description
PWR
Power is ON.
RUN
Interfaces
Table 2-38 describes the interfaces of the PRWG card.
Table 2-38 PRWG Interface Description
Interface
Description
PWR
Power interface
COM/TST1
TST2
Principle Diagram
Figure 2-30 shows the principle diagram of the PRWG card.
2-31
SJ-20140312095717-004|2014-06-30 (R1.0)
Technical Specifications
Table 2-39 lists technical specifications of the PRWG card.
Table 2-39 PRWG Technical Specifications
Item
Specification
Power consumption
5W
Dimensions
Weight
0.36 kg
2.9 Backplanes
The ZXA10 C300 supports the following backplanes:
l
l
Panel
Figure 2-31 shows the 21-inch backplane.
2-32
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Interfaces
The backplane provides the following interfaces:
l
l
l
Interfaces for switching and control cards, interface cards, and uplink cards
Power card interface: -48 V, 48 V GND, 3.3 V, and GND
Fan socket: -48 V, -48 V GND, and fan detection/control
Technical Specifications
Table 2-40 lists technical specifications of the 21-inch backplane.
Table 2-40 21-Inch Backplane Technical Specifications
Item
Specification
Power consumption
Dimensions
Weight
2.57 kg
2-33
SJ-20140312095717-004|2014-06-30 (R1.0)
Panel
Figure 2-32 shows the 19-inch backplane.
Figure 2-32 19-Inch Backplane
Interfaces
The backplane provides the following interfaces:
l
l
l
Interfaces for switching and control cards, interface cards, and uplink cards
Power card interface: -48 V, 48 V GND, 3.3 V, and GND
Fan socket: -48 V, -48 V GND, and fan detection/control
2-34
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 2 Cards
Technical Specifications
Table 2-41 lists technical specifications of the 19-inch backplane.
Table 2-41 19-Inch Backplane Technical Specifications
Item
Specification
Power consumption
Dimensions
Weight
2.35 kg
Controls the rotating speed of fans to cool the system in accordance with the
requirements for the working temperature.
Indicates the operating status of fans.
Controls the rotating speed of fans in accordance with the commands received from
a NMS.
Reports the status of each fan to the NMS.
Table 2-42 lists the differences between the FCWB and the FCWD cards.
Table 2-42 FCWB and FCWD Cards
Item
FCWB
FCWD
Number of fans
Fan-19: 3
Fan-19: 10
Fan-21: 4
Fan-21: 10
Fan dimensions
127 mm 127 mm 38 mm
80 mm 80 mm 38 mm
4800 RPM
7500 RPM
Panel
Figure 2-33 displays the panel of the fan box.
2-35
SJ-20140312095717-004|2014-06-30 (R1.0)
Indicators
Table 2-43 describes the indicators of the fan boxes.
Table 2-43 Fan Boxes Indicator Description
Indicator
Status
Description
RUN
ALM
Technical Specifications
Table 2-44 lists technical specifications of fan boxes.
Table 2-44 Fan Boxes Technical Specifications
Item
Specification
Power consumption
FAN-19 (FCWB): 44 W
FAN-21 (FCWB): 55 W
FAN-19/21 (FCWD): 55 W (typical, 60% speed), 130 W (maximum)
Dimensions (Height
Width Depth)
Weight
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 3
Cables
Table 3-1 lists the cables used by the ZXA10 C300.
Table 3-1 ZXA10 C300 Cables
Cable
Description
Power cable
E1 unbalanced cable
Network cable
Fiber pigtail
Table of Contents
Power Cable ..............................................................................................................3-1
E1 Unbalanced Cable ................................................................................................3-2
Network Cable............................................................................................................3-4
Serial Port Cable ........................................................................................................3-5
Fiber Pigtail ................................................................................................................3-6
3-1
SJ-20140312095717-004|2014-06-30 (R1.0)
Cable Connection
End A of the power cable is connected to the ZXA10 C300 shelf, supplying the power to the
shelf. End B of the power cable is connected to the DC terminal of the power distributor.
3-2
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 3 Cables
Pin Connections
Table 3-2 lists pin connections of E1 unbalanced cable .
Table 3-2 Pin Connections of E1 Cable Unbalanced
Pin at End A
E1 Signal
Pin at End B
E1 Signal
A1
OUT16A
B1
GND
A2
IN16A
B2
IN16B
A3
OUT15A
B3
GND
A4
IN15A
B4
IN15B
A5
OUT14A
B5
GND
A6
IN14A
B6
IN14B
A7
OUT13A
B7
GND
A8
IN13A
B8
IN13B
A9
OUT12A
B9
GND
A10
IN12A
B10
IN12B
A11
OUT11A
B11
GND
A12
IN11A
B12
IN11B
3-3
SJ-20140312095717-004|2014-06-30 (R1.0)
Pin at End A
E1 Signal
Pin at End B
E1 Signal
A13
OUT10A
B13
GND
A14
IN10A
B14
IN10B
A15
OUT9A
B15
GND
A16
IN9A
B16
IN9B
A17
OUT8
B17
GND
A18
IN8A
B18
IN8B
A19
OUT7A
B19
GND
A20
IN7A
B20
IN7B
A21
OUT6A
B21
GND
A22
IN6A
B22
IN6B
A23
OUT5A
B23
GND
A24
IN5A
B24
IN5B
A25
OUT4A
B25
GND
A26
IN4A
B26
IN4B
A27
OUT3A
B27
GND
A28
IN3A
B28
IN3B
A29
OUT2A
B29
GND
A30
IN2A
B30
IN2B
A31
OUT1A
B31
GND
A32
IN1A
B32
IN1B
Pin Connections
Table 3-3 lists the pin connections of a network cable.
3-4
SJ-20140312095717-004|2014-06-30 (R1.0)
Chapter 3 Cables
End B
Signal
RJ45_1
RJ45_3 (Crossover)
TPOP
RJ45_1 (Straight-through)
RJ45_2
RJ45_6 (Crossover)
TPOP
RJ45_2 (Straight-through)
RJ45_3
RJ45_1 (Crossover)
TPIP
RJ45_3 (Straight-through)
RJ45_6
RJ45_2 (Crossover)
TPIN
RJ45_6 (Straight-through)
Note:
The network cable cannot be longer than 100 m.
3-5
SJ-20140312095717-004|2014-06-30 (R1.0)
Pin Connections
Table 3-4 lists pin connections of the serial port cable.
Table 3-4 Pin Connections of the Serial Port Cable
End A
End B
Connector Description
Table 3-5 describes the optical connectors.
Table 3-5 Optical Connector
Type
Description
LC/PC
Ethernet optical
interface
PON optical
interface
SC/PC
Image
Interface
3-6
SJ-20140312095717-004|2014-06-30 (R1.0)
Glossary
1PPS
- 1 Pulse Per Second
BITS
- Building Integrated Timing Supply
CES
- Circuit Emulation Service
CES
- Channel Element Subsystem
CODEC
- Code and Decode
CPU
- Central Processing Unit
DC
- Direct Current
FE
- Fast Ethernet
GE
- Gigabit Ethernet
GPON
- Gigabit Passive Optical Network
LACP
- Link Aggregation Control Protocol
LIU
- Line Interface Unit
LOF
- Loss of Frame
LOS
- Loss of Signal
MAC
- Media Access Control
NM
- Network Management
NMS
- Network Management System
I
SJ-20140312095717-004|2014-06-30 (R1.0)
P2P
- Point to Point
PON
- Passive Optical Network
RS-232
- Recommended Standard 232
SLA
- Service Level Agreement
STM
- Synchronous Transport Module
STM-N
- Synchronous Transport Module, level N(N=1, 4, 16, 64)
TC
- Transparent Clock
TDM
- Time Division Multiplexing
TM
- TrafficManagement
TOD
- Time of Day
WDM
- Wavelength Division Multiplexing
II
SJ-20140312095717-004|2014-06-30 (R1.0)