Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Personal information
Surname(s) / First name(s)
Address
Telephone(s)
E-mail(s)
Date of birth
Gender
26/08/1982
Male
15/01/2011 Present
Scientific Staff , Institute of Turbomachinery, Uni. Duisburg Essen (https://www.unidue.de/tm/index_en.php)
Dates
Occupation or position held
Main activities and responsibilities
01/04/2010 - 31/12/2010
Master Thesis Student @ Department of Turbomachinery
Design and Numerical Investigation of a 4 stage Axial compressor
The aim of this project was to design a research compressor for the chair of Turbomachinery
The entire design was carried out in a systematic manner to achieve an optimized design.
Parametric analysis to choose optimum design point.
Meanline design of 4 stage axial compressor using Mathcad.
Blade design using free vortex and radial equilibrium method.
Control of design based on Dehaller, Diffusion factor and Mach number.
Parametric design of blades using ProE Wildfire 5.0
Grid generation and Numerical investigation using ANSYS Turbogrid and CFX
Department of Turbomachinery, University of Duisburg Essen
Forsthausweg 2, 47057 Duisburg (Germany)
01/03/2010 - 31/10/2010 (19 hrs per week)
Research student @ Institut fr Energie- und Umwelttechnik
2D and 3D grid generation using Gambit 2.4
Parametric analysis of a Electro-Hydrodynamic model using Fluent 12.1 to study electrical effects at
high temperatures (Radiation, diffusive transport).
Fine Particle Model analysis of the reactor to study Thermophoretic effects.
University of Duisburg Essen, Institut fr Energie- und Umwelttechnik
Bliersheimer Strae 60, 47229 Duisburg (Germany)
01/04/2009 - 30/09/2009
Internship Student
Implementation of Bisection algorithm for 1D Aerothermodynamics of Radial Compressor and
comparison of results with Newton method and fixed point iteration method.
Numerical Optimization of Radial Compressors using regression analysis and student's t distribution.
13/04/2008 - 13.05.2011
Master of Science in Computational Mechanics
Computational Fluid Dynamics, Aerothermodynamics of internal flows, Turbulent flows, Gasdynamics
University of Duisburg Essen
Duisburg (Germany)
15/09/1999 - 15/04/2004
Bachelor in Engineering of Industrial and Production Engineering
Fluid Mechanics, Machine design, Computer aided design, Production technology etc.
Sri Jayachamarajendra College of Engineering (Affiliated to : Visveswaraiah Technological University)
Mysore (India)
Languages
Mother tongue(s)
Other Languages
European level (*)
Kannada
Understanding
Listening
Reading
Speaking
Spoken interaction
Writing
Spoken production
Proficient user
German B1 Independent user B1 Independent user B1 Independent user B1 Independent user B1 Independent user
Hindi C2 Proficient user C2 Proficient user C2 Proficient user C2 Proficient user C2
Proficient user
1. Numerical investigation of flow over NACA0012 and NACA4412 airfoils using ICEM and StarCCM+
to study Aerodynamic characteristics (CD, CL, Cp). Various simulations at angle of attack ranging from
-2 to 16 and for various Reynolds number were carried out and different graphs were plotted to study
behaviour of drag, lift and CP.
2. Bluff body Aerodynamics (Flow over a cylinder) at different Reynolds numbers using StarCCM+ to
study various turbulence models, compute frequency of vortices, and angle of separation.
3. 1D Parametric analysis and design a simple turbojet to achieve specific thrust of 4000lbf and plot
an optimization carpet to study behaviour of the turbojet.
4. Solid Modeling and Structural Analysis of Gear Pump Casing (Academic).
5. Design and Fabrication of Automated Material Handling / Transfer system (Academic).
6. This work is based on water quenching process. The gas coming out of gassifier is cooled by
injecting cold water. Grid generation and Numerical investigation of a gassifier quench was carried out
using Gambit 2.4 and Fluent 6.3. For this case k-epsilon turbulence model was used.
Publications
2.