Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
KPI Reference
Issue
05
Date
2014-05-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
05 (2014-05-30)
Product Versions
The following table lists the product version related to this document.
Product Name
Solution Version
Product Version
DBS3900
SRAN8.0
V100R008C00
BTS3900
eRAN6.0
BTS3900A
BTS3900L
BTS3900AL
BTS3202E
BTS3203E LTE
eRAN6.0
V100R006C00
Intended Audience
This document is intended for:
05 (2014-05-30)
Network planners
Network administrators
Network operators
ii
Change History
This section provides information about the changes in different document versions.
There are two types of changes, which are defined as follows:
Technical change: refers to a change in the key performance indicator (KPI) definition of
a specific product version.
Editorial change: refers to a change in wording or the addition of information that was
not described in the earlier version.
05 (2014-05-30)
04 (2013-11-08)
03 (2013-06-26)
02 (2013-05-30)
01 (2013-04-28)
Draft A (2013-02-08)
05 (2014-05-30)
This is the fifth commercial release.
Compared with Issue 04 (2013-11-08), Issue 05 (2014-05-30) includes the following changes.
Change Type
Changed Part
Change Description
Addition
Chapter 4 "Mobility
KPIs"
Chapter 9 "Counter
List"
04 (2013-11-08)
This is the fourth commercial release.
Compared with Issue 03 (2013-06-26), Issue 04 (2013-11-08) includes the following changes.
05 (2014-05-30)
Change Type
Changed Part
Change Description
Modification
Chapter 9
"Counter List"
iii
03 (2013-06-26)
This is the third commercial release.
Compared with Issue 02 (2013-05-30), Issue 03 (2013-06-26) includes the following changes.
Change Type
Changed Part
Change Description
Modification
Chapter 9
"Counter List"
Deletion
KPI template
02 (2013-05-30)
This is the second commercial release.
Compared with Issue 01 (2013-04-28), Issue 02 (2013-05-30) includes the following changes.
Change Type
Change Description
Parameter Change
Technical change
None
None
Editorial change
None
01 (2013-04-28)
This is the first commercial release.
Compared with Draft A (2013-02-08), this issue modified the mapping between the Cell
Downlink Average Throughput KPI/Cell Uplink Average Throughput KPI and counters.
Draft A (2013-02-08)
This is a draft.
Compared with Issue 01 (2011-12-18) of V100R005C00, Draft A (2013-02-08) of
V100R006C00 includes the following changes.
05 (2014-05-30)
iv
Change Type
Change Description
Parameter Change
Technical change
None
Editorial change
05 (2014-05-30)
None
Contents
Contents
About This Document .................................................................................................................... ii
1 Overview......................................................................................................................................... 1
2 Accessibility KPIs ......................................................................................................................... 2
2.1 RRC Setup Success Rate (Service) .................................................................................................................. 2
2.1.1 Description .............................................................................................................................................. 2
2.1.2 Definition ................................................................................................................................................ 3
2.2 RRC Setup Success Rate (Signaling) ............................................................................................................... 3
2.2.1 Description .............................................................................................................................................. 3
2.2.2 Definition ................................................................................................................................................ 4
2.3 E-RAB Setup Success Rate (VoIP) .................................................................................................................. 4
2.3.1 Description .............................................................................................................................................. 4
2.3.2 Definition ................................................................................................................................................ 6
2.4 E-RAB Setup Success Rate (All) ..................................................................................................................... 6
2.4.1 Description .............................................................................................................................................. 6
2.4.2 Definition ................................................................................................................................................ 6
2.5 Call Setup Success Rate ................................................................................................................................... 7
2.5.1 Description .............................................................................................................................................. 7
2.5.2 Definition ................................................................................................................................................ 7
4 Mobility KPIs............................................................................................................................... 11
4.1 Intra-Frequency Handover Out Success Rate ................................................................................................. 11
4.1.1 Description ............................................................................................................................................ 11
4.1.2 Definition .............................................................................................................................................. 14
05 (2014-05-30)
vi
Contents
05 (2014-05-30)
vii
Contents
viii
05 (2014-05-30)
Contents
ix
1 Overview
Overview
This document specifies a set of eRAN KPIs used to evaluate the performance of the LTE
system and provides a detailed description of the counters necessary for calculating these
KPIs. Given that LTE is a new system, the KPIs in this document are drafts, and as such, are
subject to change. KPIs will be updated according to commercial network management and
radio network optimization needs.
The KPIs in this document are classified into the following seven categories:
Accessibility KPIs
Retainability KPIs
Mobility KPIs
Utilization KPIs
Availability KPIs
Traffic KPIs
05 (2014-05-30)
Chapter
Details
1 Overview
2 Accessibility KPIs
3 Retainability KPIs
4 Mobility KPIs
6 Utilization KPIs
7 Availability KPIs
8 Traffic KPIs
9 Counter List
10 References
2 Accessibility KPIs
Accessibility KPIs
Accessibility KPIs are used to measure the probability that a user accesses the network and
requests services in the given operating conditions. The service provided by the E-UTRAN is
defined as EPS/E-RABs. (EPS is short for evolved packet system, and E-RAB is short for
E-UTRAN radio access bearer). Radio Resource Control (RRC) connections and System
Architecture Evolution (SAE) setups are the main procedures whose performance is measured
by accessibility KPIs.
05 (2014-05-30)
2 Accessibility KPIs
2.1.2 Definition
The RRC Setup Success Rate (Service) KPI is defined in Table 2-1. Note that the number of
RRC connection setup attempts (service) and the number of successful RRC setup
connections (service) are collected based on the description in section 2.1.1 "Description."
Table 2-1 RRC Setup Success Rate (Service)
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
05 (2014-05-30)
2 Accessibility KPIs
2.2.2 Definition
The RRC Setup Success Rate (Signaling) KPI is defined in Table 2-2. Note that the number of
RRC connection setup attempts (signaling) and the number of successful RRC setup
connections (signaling) are collected based on the description in section 2.1.1 "Description."
Table 2-2 RRC Setup Success Rate (Signaling)
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
05 (2014-05-30)
2 Accessibility KPIs
05 (2014-05-30)
2 Accessibility KPIs
The eNodeB collects the number of E-RAB connection setup attempts at measurement point
A, and the number of successful E-RAB connections is counted at measurement point B, as
shown in Figure 2-2 and Figure 2-3. Note that the eNodeB needs to specify the Quality of
Service (QoS) Class Identifier (QCI) for VoIP in the E-RAB setup message.
The voice service can be identified by the QoS information, particularly the QCI in the
E-RAB Setup Request message. In general, QCI 1 is assigned to the voice service.
2.3.2 Definition
The E-RAB Setup Success Rate (VoIP) KPI is defined in Table 2-3. Note that the number of
E-RAB connection setup attempts (VoIP) and the number of successful E-RAB setup
connections (VoIP) are collected based on the descriptions in section 2.3.1 "Description."
Table 2-3 E-RAB Setup Success Rate (VoIP)
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
2.4.2 Definition
The E-RAB Setup Success Rate (All) KPI is defined in Table 2-4. The number of E-RAB
connection setup attempts (all) and the number of successful E-RAB setup counters (all) are
collected based on the description in section 2.3.1 "Description."
05 (2014-05-30)
2 Accessibility KPIs
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
2.5.2 Definition
The Call Setup Success Rate KPI is defined in Table 2-5. The KPI is calculated by
multiplying the RRC Setup Success Rate (Service) KPI, the S1 Signaling Connection Setup
Success Rate KPI, and the E-RAB Setup Success Rate (All) KPI.
Table 2-5 Call Setup Success Rate
KPI Name
Measurement Scope
Formula
CSSR
Associated Counters
Unit
Percentage (%)
05 (2014-05-30)
100%
RRCConnectionAttemptservice S1SIGConnectionEstablishAttempt ERABSetupAttempt
3 Retainability KPIs
Retainability KPIs
Retainability KPIs indicate the network's capability to retain services requested by a user for a
desired duration once the user is connected to the services. Retainability KPIs are important in
evaluating whether the system can maintain a certain level of service quality.
When the eNodeB sends an E-RAB Release Indication message to the MME or a UE Context
Release Request message to the MME as shown in Figure 3-1, the abnormal E-RAB release
05 (2014-05-30)
3 Retainability KPIs
counter is incremented if the bearer to be released carries data and the release cause is not
"Normal Release", "Detach", "User Inactivity", "CS Fallback triggered", "UE Not Available
for PS Service", or "Inter-RAT Redirection". If the message contains several E-RAB ID IEs
(in the E-RAB To Be Released List IE), the counter will be incremented for each individual
E-RAB.
3.1.2 Definition
The Call Drop Rate (VoIP) KPI is defined in Table 3-1.
Table 3-1 Call Drop Rate (VoIP)
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
3.2.2 Definition
The Service Drop Rate (All) KPI is defined in Table 3-2.
05 (2014-05-30)
3 Retainability KPIs
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
Percentage (%)
10
4 Mobility KPIs
Mobility KPIs
Mobility KPIs are used to evaluate E-UTRAN mobility performance, which is critical to
customer experience. Three categories of mobility KPIs are defined based on the following
handover types: intra-frequency, inter-frequency, and inter-Radio Access Technology (RAT).
05 (2014-05-30)
11
4 Mobility KPIs
Two scenarios are available for the inter-eNodeB HO, as shown in Figure 4-2 and Figure 4-3.
The HO attempts are collected at point B. When the source-eNodeB (S-eNodeB) sends an
RRC Connection Reconfiguration message to the UE, it decides to perform an inter-eNodeB
HO. In this KPI, the source and target cells of the handover operate at the same frequency.
The number of inter-eNodeB intra-frequency HO attempts is measured at the source cell.
The number of successful inter-eNodeB intra-frequency HOs is collected at point C, as shown
in Figure 4-2 and Figure 4-3. During a handover with the source and target cells at the same
frequency, the number of successful inter-eNodeB intra-frequency HOs is measured in the
source cell. This measurement occurs when the S-eNodeB receives a UE Context Release
message from the target-eNodeB (T-eNodeB) or a UE Context Release Command message
from the MME, indicating that the UE T-eNodeB is successfully attached to the T-eNodeB.
05 (2014-05-30)
12
4 Mobility KPIs
05 (2014-05-30)
13
4 Mobility KPIs
4.1.2 Definition
The Intra-Frequency Handover Out Success Rate KPI is defined in Table 4-1. Note that the
attempted HO and the successful HO counters are collected based on the description in
section 4.1.1 "Description."
Table 4-1 Intra-Frequency Handover Out Success Rate
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
4.2.2 Definition
The Inter-Frequency Handover Out Success Rate KPI is defined in Table 4-2. Note that the
attempted HO and the successful HO counters are collected based on the description in
section 4.2.1 "Description."
05 (2014-05-30)
14
4 Mobility KPIs
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
Two scenarios are available for the inter-eNodeB HO, as shown in Figure 4-5 and Figure 4-6.
The HO attempts are collected at point B in the target cell when the T-eNodeB sends a
05 (2014-05-30)
15
4 Mobility KPIs
Handover Request Acknowledge message to the S-eNodeB or the MME. The number of
successful inter-eNodeB HO s are measured in the target cell at point C when the T-eNodeB
receives an RRC Connection Reconfiguration Complete message from the UE and sends a
UE CONTEXT RELEASE message to the S-eNodeB or when the T-eNodeB sends a
HANDOVER NOTIFY message to MME.
Figure 4-5 Scenario A for inter-eNodeB HO
05 (2014-05-30)
16
4 Mobility KPIs
4.3.2 Definition
The Handover In Success Rate KPI is defined in Table 4-3. Note that the attempted HO and
the successful HO counters are collected based on the description in section 4.3.1
"Description."
Table 4-3 Handover In Success Rate
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
Percentage (%)
05 (2014-05-30)
17
4 Mobility KPIs
4.4.2 Definition
The Inter-RAT Handover Out Success Rate (LTE to CDMA2000) KPI is defined in Table 4-4.
The number of LTE-to-CDMA2000 HO attempts and the number of successful inter-RAT
HOs from LTE to CDMA2000 are collected as described in section 4.4.1 "Description."
Table 4-4 Inter-RAT Handover Out Success Rate (LTE to CDMA2000)
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
IRATHO _ L2C _ SR
Associated
Counters
Unit
Percentage (%)
18
4 Mobility KPIs
4.5.2 Definition
The Inter-RAT Handover Out Success Rate (LTE to WCDMA) KPI is defined in Table 4-5.
The number of LTE-to-WCDMA HO attempts and the number of successful inter-RAT HOs
from LTE to WCDMA are collected as described in section 4.5.1 "Description."
05 (2014-05-30)
19
4 Mobility KPIs
Measurement
Scope
Formula
IRATHO _ L2W _ SR
Associated
Counters
Unit
Percentage (%)
4.6.2 Definition
The Inter-RAT Handover Out Success Rate (LTE to GSM) KPI is defined in Table 4-6. The
number of LTE-to-GSM HO attempts and the number of successful inter-RAT HOs from LTE
to GSM are collected as described in section 4.6.1 "Description."
Table 4-6 Inter-RAT Handover Out Success Rate (LTE to GSM)
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
IRATHO _ L2G _ SR
Associated
Counters
Unit
Percentage (%)
20
4 Mobility KPIs
4.7.2 Definition
The Inter-RAT Handover Out Success Rate (LTE to TD-SCDMA) KPI is defined in Table 4-7.
The number of LTE-to-TD-SCDMA HO attempts and the number of successful inter-RAT
HOs from LTE to TD-SCDMA are collected as described in section 4.7.1 "Description."
Table 4-7 Inter-RAT Handover Out Success Rate (LTE to TD-SCDMA)
KPI Name
Measurement
Scope
Formula
IRATHO _ L2T _ SR
Associated
Counters
Unit
05 (2014-05-30)
21
4 Mobility KPIs
05 (2014-05-30)
22
4 Mobility KPIs
4.8.2 Definition
The CSFB Preparation Success Rate KPI is defined in Table 4-8. The number of handover
preparation attempts for CSFB and the number of successful handover preparations for CSFB
from the E-UTRAN to inter-RAT networks are collected as described in section 4.8.1
"Description."
Table 4-8 CSFB Preparation Success Rate
KPI Name
Measurement
Scope
Formula
CSFB _ Preparation _ SR
Associated
Counters
Unit
4.9.2 Definition
The CSFB Success Rate Based Handover (LTE to WCDMA) KPI is defined in Table 4-9. The
number of handover-based LTE-to-WCDMA CSFB attempts and the number of successful
handover-based LTE-to-WCDMA CSFB executions are collected as described in section 4.9.1
"Description."
05 (2014-05-30)
23
4 Mobility KPIs
Measurement
Scope
Formula
Associated
Counters
Unit
4.10.2 Definition
The CSFB Success Rate Based Handover (LTE to GSM) KPI is defined in Table 4-10. The
number of handover-based LTE-to-GSM CSFB attempts and the number of successful
handover-based LTE-to-GSM CSFB executions are collected as described in section 4.10.1
"Description."
Table 4-10 CSFB Success Rate Based Handover (LTE to GSM)
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
24
4 Mobility KPIs
4.11.2 Definition
The CSFB Success Rate Based Handover (LTE to TD-SCDMA) KPI is defined in Table 4-11.
The number of handover-based LTE-to-TD-SCDMA CSFB attempts and the number of
successful handover-based LTE-to-TD-SCDMA CSFB executions are collected as described
in section 4.11.1 "Description."
Table 4-11 CSFB Success Rate Based Handover (LTE to TD-SCDMA)
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
05 (2014-05-30)
25
4 Mobility KPIs
eNodeB receives a UE CONTEXT RELEASE COMMAND message from the MME after the
UE successfully accesses the CDMA2000 network.
4.12.2 Definition
The CSFB Success Rate Based Handover (LTE to CDMA2000) KPI is defined in Table 4-12.
The number of handover-based LTE-to-CDMA2000 CSFB attempts and the number of
successful handover-based LTE-to-CDMA2000 CSFB executions are collected as described
in section 4.12.1 "Description."
Table 4-12 CSFB Success Rate Based Handover (LTE to CDMA2000)
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
26
The service integrity KPIs indicate the E-UTRAN impacts on the service quality provided to
the end-user. The service integrity KPIs can be calculated for each cell or radio network.
5.1.2 Definition
The Service Downlink Average Throughput KPI is defined in Table 5-2. Nine different
sub-KPIs exist for each QCI. The formula for each KPI is mapped to its corresponding
counter. Table 5-1 lists the requirements for services with different QCIs.
Table 5-1 Requirements for services with different QCIs
Packet
Delay
Budget
(NOTE
1)
Packet
Error
Loss
100 ms
10-2
Conversational Voice
150 ms
10-3
50 ms
10-3
300 ms
10-6
Non-Conversational Video
(Buffered Streaming)
QCI
05 (2014-05-30)
Resource
Type
GBR
Priority
Example Services
Rate
(NOTE
2)
27
QCI
Resource
Type
Non-GBR
Priority
Packet
Delay
Budget
(NOTE
1)
Packet
Error
Loss
100 ms
10-6
-6
Example Services
Rate
(NOTE
2)
IMS Signaling
300 ms
10
100 ms
10-3
300 ms
10-6
300 ms
10-6
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
kbit/s
28
5.2.2 Definition
The Service Uplink Average Throughput KPI is defined in Table 5-3. Nine sub-KPIs exist for
each QCI. The formula for each KPI is mapped to its corresponding counter.
Table 5-3 Service Uplink Average Throughput
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
kbit/s
05 (2014-05-30)
29
5.3.2 Definition
The Cell Downlink Average Throughput KPI is defined in Table 5-4 and is calculated based
on all the data transferred at the downlink and the time it takes to transfer. The formula is
mapped to its corresponding counters.
Table 5-4 Cell Downlink Average Throughput
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
kbit/s
5.4.2 Definition
The Cell Uplink Average Throughput KPI is defined in Table 5-5 and is calculated based on
all the data transferred at the uplink and the time it takes to transfer. The formula is mapped to
its corresponding counters.
Table 5-5 Cell Uplink Average Throughput
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
kbit/s
30
5.5.2 Definition
The Cell Downlink Maximum Throughput KPI is defined in Table 5-6 and is calculated based
on the maximum volume of traffic transferred each second. The formula is mapped to its
corresponding counters.
Table 5-6 Cell Downlink Maximum Throughput
KPI Name
Measurement
Scope
Formula
Associated
Counters
Unit
kbit/s
5.6.2 Definition
The Cell Uplink Maximum Throughput KPI is defined in Table 5-7 and is calculated based on
the maximum volume of traffic transferred each second. The formula is mapped to its
corresponding counters.
05 (2014-05-30)
31
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
kbit/s
32
6 Utilization KPIs
Utilization KPIs
Utilization KPIs are used to evaluate the capabilities, such as the capability to meet traffic
demands, in specific internal conditions.
6.1.2 Definition
The uplink and downlink Resource Block Utilizing Rate KPIs are defined in Table 6-1.
Table 6-1 Resource Block Utilizing Rate
KPI Name
Measurement
Scope
Formula
05 (2014-05-30)
Associated
Counters
Unit
Percentage (%)
33
6 Utilization KPIs
6.2.2 Definition
The Average CPU Load KPI is defined in Table 6-2. The CPU load is calculated by averaging
the CPU usage ratio during the measurement period.
Table 6-2 Average CPU Load
05 (2014-05-30)
KPI Name
Measurement
Scope
CPU
Formula
MeanCPUUtility
Associated
Counters
Unit
Percentage (%)
34
7 Availability KPIs
Availability KPIs
A cell is available when the eNodeB can provide EPS bearer services. Availability in a cell
can be measured when a variety of hardware/software faults occurs in the cell.
7.1.2 Definition
The Radio Network Unavailability Rate KPI is defined in Table 7-1. This KPI is calculated
based on the length of time all cell services are unavailable on the radio network.
Table 7-1 Radio Network Unavailability Rate
KPI Name
Measurement
Scope
Radio network
Formula
NOTE
05 (2014-05-30)
Associated
Counters
Unit
Percentage (%)
35
8 Traffic KPIs
Traffic KPIs
Traffic KPIs are used to measure the traffic volume on the LTE Radio Access Network (RAN).
Based on traffic types, the traffic KPIs are classified into the following categories: radio
bearers, downlink traffic volume, and uplink traffic volume.
8.1.2 Definition
The Radio Bearers KPIs are defined in Table 8-1 and include ten different sub-KPIs. The
formula for each KPI is mapped to its corresponding counter.
05 (2014-05-30)
36
8 Traffic KPIs
Radio Bearers
Measurement
Scope
Formula
RadioBearers
RadioBearers_QCI_1
RadioBearers_QCI_2
RadioBearers_QCI_3
RadioBearers_QCI_4
RadioBearers_QCI_5
RadioBearers_QCI_6
RadioBearers_QCI_7
RadioBearers_QCI_8
RadioBearers_QCI_9
Associated
Counters
Unit
NA
8.2.2 Definition
The Downlink Traffic Volume KPIs are defined in Table 8-2 and include ten sub-KPIs. The
formula for each KPI is mapped to its corresponding counter.
05 (2014-05-30)
37
8 Traffic KPIs
Measurement
Scope
Formula
DLTrafficVolume
DLTrafficVolume_QCI_1
DLTrafficVolume_QCI_2
DLTrafficVolume_QCI_3
DLTrafficVolume_QCI_4
DLTrafficVolume_QCI_5
DLTrafficVolume_QCI_6
DLTrafficVolume_QCI_7
DLTrafficVolume_QCI_8
DLTrafficVolume_QCI_9
Associated
Counters
Unit
bit
8.3.2 Definition
The Uplink Traffic Volume KPIs are defined in Table 8-3 and include ten sub-KPIs. The
formula for each KPI is mapped to its corresponding counter.
05 (2014-05-30)
38
8 Traffic KPIs
Measurement
Scope
Formula
ULTrafficVolume
ULTrafficVolume_ QCI _ 1
ULTrafficVolume_ QCI _ 2
ULTrafficVolume_ QCI _ 3
ULTrafficVolume_ QCI _ 4
ULTrafficVolume_ QCI _ 5
ULTrafficVolume_ QCI _ 6
ULTrafficVolume_ QCI _ 7
ULTrafficVolume_ QCI _ 8
ULTrafficVolume_ QCI _ 9
Associated
Counters
Unit
bit
8.4.2 Definition
The Average User Number KPI is defined in Table 8-4. The formula is mapped to its
corresponding counters.
05 (2014-05-30)
39
8 Traffic KPIs
Measurement
Scope
Formula
AveUserNumber
Associated
Counters
Unit
NA
8.5.2 Definition
The Maximum User Number KPI is defined in Table 8-5. The formula is mapped to its
corresponding counters.
Table 8-5 Maximum User Number
05 (2014-05-30)
KPI Name
Measurement
Scope
Formula
MaxUserNumber
Associated
Counters
Unit
NA
40
9 Counter List
Counter List
Table 9-1 provides a list of all the counters relevant to KPI calculation. In each KPI
specification, one or more parameters are used to calculate the KPI, as shown in the KPI
formula. Each parameter is mapped to a counter. For details on each counter, see eNodeB
Performance Counter Reference.
Note that only QCI 1 is used for VoIP service (conversational voice). According to Table 6.1.7
in 3GPP TS 23.203, QCI 7 can also be assigned to non-conversational voice. In this document,
QCI 7 is not considered to be part of the VoIP service in KPI calculation.
The counters listed in the following table are described in eNodeB Performance Counter
Reference.
Table 9-1 KPI-related counter list
KPI
Parameter in KPI
Formula
Mapped Counters
RRCConnectionAttem
ptservice
L.RRC.ConnReq.Att.Emc +
L.RRC.ConnReq.Att.HighPri +
L.RRC.ConnReq.Att.Mt +
L.RRC.ConnReq.Att.MoData +
L.RRC.ConnReq.Att.DelayTol
RRCConnectionSucce
ssservice
L.RRC.ConnReq.Succ.Emc +
L.RRC.ConnReq.Succ.HighPri +
L.RRC.ConnReq.Succ.Mt +
L.RRC.ConnReq.Succ.MoData +
L.RRC.ConnReq.Succ.DelayTol
RRCConnectionAttem
ptsignaling
L.RRC.ConnReq.Att.MoSig
RRCConnectionSucce
sssignaling
L.RRC.ConnReq.Succ.MoSig
VoIPERABSetupAtte
mpt
L.E-RAB.AttEst.QCI.1
VoIPERABSetupSucc
ess
L.E-RAB.SuccEst.QCI.1
ERABSetupAttempt
L.E-RAB.AttEst
05 (2014-05-30)
41
9 Counter List
KPI
Parameter in KPI
Formula
Mapped Counters
Rate (All)
ERABSetupSuccess
L.E-RAB.SuccEst
RRCConnectionAttem
ptservice
L.RRC.ConnReq.Att.Emc +
L.RRC.ConnReq.Att.HighPri +
L.RRC.ConnReq.Att.Mt +
L.RRC.ConnReq.Att.MoData +
L.RRC.ConnReq.Att.DelayTol
RRCConnectionSucce
ssservice
L.RRC.ConnReq.Succ.Emc +
L.RRC.ConnReq.Succ.HighPri +
L.RRC.ConnReq.Succ.Mt +
L.RRC.ConnReq.Succ.MoData +
L.RRC.ConnReq.Succ.DelayTol
S1SIGConnectionEsta
blishAttempt
L.S1Sig.ConnEst.Att
S1SIGConnectionEsta
blishSuccess
L.S1Sig.ConnEst.Succ
ERABSetupAttempt
L.E-RAB.AttEst
ERABSetupSuccess
L.E-RAB.SuccEst
VoIPERABAbnormal
Release
L.E-RAB.AbnormRel.QCI.1
VoIPERABRelease
L.E-RAB.AbnormRel.QCI.1 +
L.E-RAB.NormRel.QCI.1
Service Drop Rate
(All)
Intra-Frequency
Handover Out
Success Rate
Inter-Frequency
Handover Out
Success Rate
05 (2014-05-30)
ERABAbnormalRelea
se
L.E-RAB.AbnormRel
ERABRelease
L.E-RAB.AbnormRel +
L.E-RAB.NormRel
ERABAbnormalRelea
seOfAlwaysOnline
L.E-RAB.AbnormRel
ERABReleaseOfAlwa
ysOnline
L.E-RAB.AbnormRel +
L.E-RAB.NormRel +
L.E-RAB.Num.Syn2Unsyn
IntraFreqHOOutAttem
pt
L.HHO.IntraeNB.IntraFreq.ExecAttOut
+
L.HHO.IntereNB.IntraFreq.ExecAttOut
IntraFreqHOOutSucce
ss
L.HHO.IntraeNB.IntraFreq.ExecSuccO
ut +
L.HHO.IntereNB.IntraFreq.ExecSuccO
ut
InterFreqHOOutAttem
pt
L.HHO.IntraeNB.InterFreq.ExecAttOut
+
L.HHO.IntereNB.InterFreq.ExecAttOut
42
9 Counter List
KPI
Handover In Success
Rate
05 (2014-05-30)
Parameter in KPI
Formula
Mapped Counters
InterFreqHOOutSucce
ss
L.HHO.IntraeNB.InterFreq.ExecSuccO
ut +
L.HHO.IntereNB.InterFreq.ExecSuccO
ut
HOInAttempt
L.HHO.IntraeNB.ExecAttIn +
L.HHO.IntereNB.ExecAttIn
HOInSuccess
L.HHO.IntraeNB.ExecSuccIn +
L.HHO.IntereNB.ExecSuccIn
Inter-RAT Handover
Out Success Rate
(LTE to CDMA2000)
IRATHO_L2C_Attem
pt
L.IRATHO.E2C.ExecAttOut
IRATHO_L2C_Succe
ss
L.IRATHO.E2C.ExecSuccOut
Inter-RAT Handover
Out Success Rate
(LTE to WCDMA)
IRATHO_L2W_Atte
mpt
L.IRATHO.E2W.ExecAttOut
IRATHO_L2W_Succe
ss
L.IRATHO.E2W.ExecSuccOut
Inter-RAT Handover
Out Success Rate
(LTE to GSM)
IRATHO_L2G_Attem
pt
L.IRATHO.E2G.ExecAttOut
IRATHO_L2G_Succe
ss
L.IRATHO.E2G.ExecSuccOut
Inter-RAT Handover
Out Success Rate
(LTE to TD-SCDMA)
IRATHO_L2T_Attem
pt
L.IRATHO.E2T.ExecAttOut
IRATHO_L2T_Succe
ss
L.IRATHO.E2T.ExecSuccOut
CSFB Preparation
Success Rate
CSFB_Preparation_At
tepmt
L.CSFB.PrepAtt
CSFB_Preparation_Su
ccess
L.CSFB.PrepSucc
CSFB_L2W_BasedH
O_Attepmt
L.IRATHO.E2W.CSFB.ExecAttOut
CSFB_L2W_BasedH
O_Success
L.IRATHO.E2W.CSFB.ExecSuccOut
CSFB_L2G_BasedHO
_Attepmt
L.IRATHO.E2G.CSFB.ExecAttOut
CSFB_L2G_BasedHO
_Success
L.IRATHO.E2G.CSFB.ExecSuccOut
CSFB_L2T_BasedHO
_Attepmt
L.IRATHO.E2T.CSFB.ExecAttOut
43
9 Counter List
KPI
Parameter in KPI
Formula
Mapped Counters
to TD-SCDMA)
CSFB_L2T_BasedHO
_Success
L.IRATHO.E2T.CSFB.ExecSuccOut
CSFB_L2C_BasedHO
_Attepmt
L.IRATHO.E2C.CSFB.ExecAttOut
CSFB_L2C_BasedHO
_Success
L.IRATHO.E2C.CSFB.ExecSuccOut
Service Downlink
Average Throughput
DLAverageThroughpu
t_QCI_n
L.Thrp.bits.DL.QCI.1 /
L.Thrp.Time.DL.QCI.1
L.Thrp.bits.DL.QCI.2 /
L.Thrp.Time.DL.QCI.2
L.Thrp.bits.DL.QCI.3 /
L.Thrp.Time.DL.QCI.3
L.Thrp.bits.DL.QCI.4 /
L.Thrp.Time.DL.QCI.4
L.Thrp.bits.DL.QCI.5 /
L.Thrp.Time.DL.QCI.5
L.Thrp.bits.DL.QCI.6 /
L.Thrp.Time.DL.QCI.6
L.Thrp.bits.DL.QCI.7 /
L.Thrp.Time.DL.QCI.7
L.Thrp.bits.DL.QCI.8 /
L.Thrp.Time.DL.QCI.8
L.Thrp.bits.DL.QCI.9 /
L.Thrp.Time.DL.QCI.9
Service Uplink
Average Throughput
ULAverageThroughpu
t_QCI_n
L.Thrp.bits.UL.QCI.1 /
L.Thrp.Time.UL.QCI.1
L.Thrp.bits.UL.QCI.2 /
L.Thrp.Time.UL.QCI.2
L.Thrp.bits.UL.QCI.3 /
L.Thrp.Time.UL.QCI.3
L.Thrp.bits.UL.QCI.4 /
L.Thrp.Time.UL.QCI.4
L.Thrp.bits.UL.QCI.5 /
L.Thrp.Time.UL.QCI.5
L.Thrp.bits.UL.QCI.6 /
L.Thrp.Time.UL.QCI.6
L.Thrp.bits.UL.QCI.7 /
L.Thrp.Time.UL.QCI.7
05 (2014-05-30)
44
9 Counter List
Parameter in KPI
Formula
KPI
Mapped Counters
L.Thrp.bits.UL.QCI.8 /
L.Thrp.Time.UL.QCI.8
L.Thrp.bits.UL.QCI.9 /
L.Thrp.Time.UL.QCI.9
Cell Downlink
Average Throughput
CellDLTrafficVolume
L.Thrp.bits.DL
CellDLTransferTime
L.Thrp.Time.Cell.DL.HighPrecision
CellULTrafficVolume
L.Thrp.bits.UL
CellULTransferTime
L.Thrp.Time.Cell.UL.HighPrecision
Cell Downlink
Maximum
Throughput
CellDLMaxTrafficVol
umeforEach1s
L.Thrp.bits.DL.Max
Cell Uplink
Maximum
Throughput
CellULMaxTrafficVol
umeforEach1s
L.Thrp.bits.UL.Max
Resource Block
Utilizing Rate
RB_UsedDL
L.ChMeas.PRB.DL.Used.Avg
RB_AvailableDL
L.ChMeas.PRB.DL.Avail
RB_UsedUL
L.ChMeas.PRB.UL.Used.Avg
RB_AvailableUL
L.ChMeas.PRB.UL.Avail
MeanCPUUtility
VS.BBUBoard.CPULoad.Mean
Radio Network
Unavailability Rate
CellUnavailTime
L.Cell.Unavail.Dur.Sys +
L.Cell.Unavail.Dur.Manual
Radio Bearers
RadioBearers
L.Traffic.DRB
RadioBearers_QCI_n
L.Traffic.DRB.QCI.1
L.Traffic.DRB.QCI.2
L.Traffic.DRB.QCI.3
L.Traffic.DRB.QCI.4
L.Traffic.DRB.QCI.5
L.Traffic.DRB.QCI.6
L.Traffic.DRB.QCI.7
L.Traffic.DRB.QCI.8
L.Traffic.DRB.QCI.9
Downlink Traffic
Volume
05 (2014-05-30)
DLTrafficVolume
L.Thrp.bits.DL
DLTrafficVolume_QC
L.Thrp.bits.DL.QCI.1
45
9 Counter List
KPI
Parameter in KPI
Formula
Mapped Counters
I_n
L.Thrp.bits.DL.QCI.2
L.Thrp.bits.DL.QCI.3
L.Thrp.bits.DL.QCI.4
L.Thrp.bits.DL.QCI.5
L.Thrp.bits.DL.QCI.6
L.Thrp.bits.DL.QCI.7
L.Thrp.bits.DL.QCI.8
L.Thrp.bits.DL.QCI.9
Uplink Traffic
Volume
ULTrafficVolume
L.Thrp.bits.UL
ULTrafficVolume_QC
I_n
L.Thrp.bits.UL.QCI.1
L.Thrp.bits.UL.QCI.2
L.Thrp.bits.UL.QCI.3
L.Thrp.bits.UL.QCI.4
L.Thrp.bits.UL.QCI.5
L.Thrp.bits.UL.QCI.6
L.Thrp.bits.UL.QCI.7
L.Thrp.bits.UL.QCI.8
L.Thrp.bits.UL.QCI.9
05 (2014-05-30)
AvgUserNumber
L.Traffic.User.Avg
Maximum User
Number
MaxUserNumber
L.Traffic.User.Max
46
10 References
10
05 (2014-05-30)
References
1.
3GPP, TS36.331 v10.9.0 (March 2013), "Evolved Universal Terrestrial Radio Access
(E-UTRA), Radio Resource Control (RRC); Protocol Specification, (Release 10)"
2.
3GPP, TS36.300 v8.6.0 (September 2008), "Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN);
Overall description; Stage 2 (Release 8)"
3.
3GPP, TS36.413 v8.3.0 (September 2008), "Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1
Application Protocol (S1AP) (Release 8)"
4.
3GPP, TS23.401 v8.4.0 (December 2008), "Technical Specification Group Services and
System Aspects; General Packet Radio Service (GPRS) enhancements for Evolved
Universal Terrestrial Radio Access Network (E-UTRAN) access (Release 8)"
5.
3GPP, TS23.203 v8.3.1 (September 2008), "Technical Specification Group Services and
System Aspects: Policy and charging control architecture (Release 8)"
6.
47