Sei sulla pagina 1di 22

09.

4289d EU

www.pall.com/medical

Hospital Product Catalogue

www.pall.com/medical

Palls Hospital Product Portfolio


This catalogue showcases a selection of products that

Contents

can be used in hospital applications. Pall is committed to


working with our customers to develop robust technologies

Water Filters

QPoint

Pall-Aquasafe

Accessories - Quick Connect Adaptors

Accessories - Detachable Shower Rose

Pre-Filtration

In-Line Capsule Filtration

10

QPData

11

Water Testing Services

11

PCR Technology

12

optimised to perform in their real life environments.


For information on our cord blood and cell therapy
products, visit www.pall.com/medical

Infusion Filters

13

Pharmacy Filtration Devices

15

Breathing System Filters

16

Lung Function Diagnostic Filters

18

Minimally Invasive Surgery Filters

19

Medical Gas Filters

20

www.pall.com/medical

QPoint

Product description
Order code I Description

Docking Station - Tap Assembly with Quick Connect Inlet


QDTC

Packaging
Membrane area (nominal)
Flow rates (nominal)

1 unit/pkg
Not applicable
Not applicable

Diameter (nominal)
Weight (nominal)
Temperature

88 mm (3.5 in)
84 g (2.96 oz)
Continuous influent temperature 60 C (140 F) during
product installation
Maximum influent temperature 75 C (167 F) for a total
cumulative period of 90 minutes over the life of each
connected Filter Capsule
5 bar (75 psi) at continuous 60 C (140 F) influent
temperature
Reusable
External surfaces may be cleaned using common
sanitising agents.
During routine water system disinfection the Docking
Station with attached Filter Capsule can be left in place
to enable the outlet to be flushed
Polycarbonate/Acrylonitrile Butadiene Styrene (51%), Glass
Filled Nylon (22%), Polyester (20%), Stainless Steel (4%)
Recycled cardboard outer packaging

Maximum operating pressure


Maximum life
Sanitisation

Main materials of construction


Packaging material

Filter Capsule, sterile


QJ212
Jet Outlet, 0.2 m Filter
QJ22
Jet Outlet, 0.2 m Filter
12 units/pkg - QJ212 2 units/pkg - QJ22
620 cm2 (96.1 in2)
5.7 L/min at 1 bar
(1.5 gallons/min at 14.5 psi)
13.4 L/min at 3 bar (3.5 gallons/min at 43.5 psi)
18.8 L/min at 5 bar (5.0 gallons/min at 75 psi)
88 mm (3.5 in)
119 g (4.19 oz)
Continuous influent temperature 60 C (140 F) during
product installation
Maximum influent temperature 75 C (167 F) for a total
cumulative period of 90 minutes over the life of each
connected Filter Capsule
5 bar (75 psi) at continuous 60 C (140 F) influent
temperature
62 days
Compatible with common surface and systemic
disinfection programs. Complementary to water safety
plan sanitisation and hygiene protocols

Polyester (83%), Polypropylene (10%),


Polyethersulphone (5%), (Recyclable)
Recycled cardboard outer packaging. Ethylene Vinyl
Acetate (EVA) plastic film blister. Tyvek Polyethylene lid

www.pall.com/medical

Pall-Aquasafe
Disposable Water Filters

Product description
Order code I Description

Disposable Shower Head Filter for up to 31 day use, sterile


AQF4
AQF42

Packaging

AQF4 (12 units per case)


AQF42 (2 units per case)
1,020 cm2 (158.1 in2)
31.8 L/min at 5 bar (8.4 gallons/min at 75 psi)

Membrane area (nominal)


Flow rates (nominal)

Length (excluding quick


connect adaptor - nominal)

240 mm (9.45 in)

Temperature

Continuous influent temperature 60 C (140 F)


Maximum influent temperature 70 C (158 F) for a total
cumulative period of 30 minutes over the life of the filter
5 bar (75 psi) at continuous 60 C (140 F)
influent temperature
31 days
Compatible with common surface and systemic
disinfection programs. Complementary to water safety
plan sanitisation and hygiene protocols

Maximum upstream
operating pressure
Maximum filter life
Sanitisation

Disposable Tap Water Filter for up to 31 day use, sterile


AQ31F1S, AQ31F1S2
With smooth outlet
AQ31F1R, AQ31F1R2
With shower rose
AQ31F1S, AQ31F1R (12 units per case)
AQ31F1S2, AQ31F1R2 (2 units per case)
550 cm2 (85.3 in2)
AQ31F1S, AQ31F1S2
17.3 L/min at 5 bar (4.6 gallons/min at 75 psi)
AQ31F1R, AQ31F1R2
17.4 L/min at 5 bar (4.6 gallons/min at 75 psi)
AQ31F1S, AQ31F1S2
72 mm (2.8 in)
AQ31F1R, AQ31F1R2
85 mm (3.4 in)
Continuous influent temperature 60 C (140 F)
Maximum influent temperature 70 C (158 F) for a total
cumulative period of 30 minutes over the life of the filter
5 bar (75 psi) at continuous 60 C (140 F)
influent temperature
31 days
Compatible with common surface and systemic
disinfection programs. Complementary to water safety
plan sanitisation and hygiene protocols

www.pall.com/medical

Pall-Aquasafe
Disposable Water Filters (continued)

Product description
Order code I Description

In-Line Disposable Water Filter with Quick Connect Inlet


and Outlet Ports, sterile
AQIN

Packaging
Membrane area (nominal)
Flow rates (nominal)
Length (excluding quick
connect adaptor - nominal)

12 units per case


550 cm2 (85.3 in2)
12.8 L/min at 5 bar (3.4 gallons/min at 75 psi)
70 mm (2.76 in)

Temperature

Continuous influent temperature 60 C (140 F)


Maximum influent temperature 70 C (158 F) for a total
cumulative period of 30 minutes over the life of the filter
5 bar (75 psi) at continuous 60 C (140 F)

Maximum upstream
operating pressure
Maximum filter life
Sanitisation

31 days
Compatible with common surface and systemic
disinfection programs. Complementary to water safety
plan sanitisation and hygiene protocols

Disposable Tap Filter for up to 7 day use, sterile


AQ7FSN
With smooth outlet
AQ7FRN
With shower rose
12 units per case
520 cm2 (80.6 in2)
10.8 L/min at 5 bar (2.9 gallons/min at 75 psi)
AQ7FSN
72 mm (2.83 in)
AQ7FRN
85 mm (3.35 in)
Continuous influent temperature 50 C (122 F)
Maximum influent temperature 70 C (158 F) for a total
cumulative period of 30 minutes over the life of the filter
5 bar (75 psi) at continuous 60 C (140 F)
7 days
Complementary to water safety plan sanitisation and
hygiene protocols

www.pall.com/medical

Quick Connect Adaptors For Water Filters


Wash Basin, In-Line and Wall Shower Applications

Product description
Order code I Description

Quick connect adaptors 1/2 in. female thread


TAP1/2FN Without valve

Quick connect adaptors 1/2 in. female thread


TAP1/2FV With valve

Product description
Order code I Description

Quick connect adaptors 1/2 in. male thread


TAP1/2MN Without valve

Quick connect adaptors 1/2 in. male thread


TAP1/2MV With valve

Product description
Order code I Description

Quick connect adaptors 22 mm female thread


TAP22FN Without valve

Quick connect adaptors 22 mm female thread


TAP22FV With valve

Product description
Order code I Description

Quick connect adaptors 24 mm male thread


TAP24MN Without valve

Quick connect adaptors 24 mm male thread


TAP24MV With valve

www.pall.com/medical

Quick Connect Adaptors For Water Filters


Wash Basin, In-Line and Wall Shower Applications

Product description

Wash basin and in-line applications


Quick connect adaptors 1/2 in. male thread
SST1/2MN Stainless steel connector without valve,
suitable for DI water

Wash basin and in-line applications


Quick connect adaptors 1/2 in. female thread
SST1/2FV Stainless steel connector with valve,
suitable for DI water

Wash basin and in-line applications


Quick connect adaptors 16 mm female thread
CVK16N Without valve

Wash basin
Miscellaneous
TAPUC Universal connector (15-29 mm)

Product description
Order code I Description

Rotating adaptor for fixed wall shower


FR2521-M24-12-ROT Rotating adaptor for PRESTO
DL400 fixed wall shower

Fixed adaptor for fixed wall shower


FR2521-M24-12-FIXE Fixed adaptor for PRESTO PL30
fixed wall shower

Product description
Order code I Description

Fixed adaptor for jet fixed wall shower


FR2520-M24-TJ Fixed adaptor for DELABIE jet fixed
wall shower

Order code I Description

Product description
Order code I Description

www.pall.com/medical

Quick Connect Adaptors For Water Filters


Flexible Hose Shower Applications

Product description
Order code I Description

Quick connect adaptors 1/2 in. male thread


SHO1/2MNN Without valve, without restrictor

Quick connect adaptors 1/2 in. male thread


SHO1/2MVN With valve, without restrictor

Product description
Order code I Description

Quick connect adaptors 1/2 in. male thread


SHO1/2MNR Without valve, with restrictor

Quick connect adaptors 1/2 in. male thread


SHO1/2MVR With valve, with restrictor

Accessories
Product name
Product description
Order code I Description
Packaging
Maximum filter life
Maximum continuous
influent water temperature
Maximum upstream
operating pressure

Pall-Aquasafe Detachable Shower Rose


Specifically designed as an attachment to the Pall-Aquasafe
Water Filter (AQ7FSN or AQ31F1S), sterile
AQFROSE
25 units per case
Single use following attachment to the AQ7FSN or
AQ31F1S filter
40 C (104 F)
5 bar (75 psi) at continuous 40 C (104 F) influent
temperature

Product description
Order code I Description

Miscellaneous shower positioning applications


E135 Elbow connection, 1/2 in., 60

Product description
Order code I Description

Miscellaneous sampling applications


PN22C Connector for ease of water sampling

www.pall.com/medical

Pre-Filtration
Pall pre-filtration technologies can be installed either at the point of entrance or in-line within a building. They significantly reduce the amount of incoming
organic and inorganic particles, which may contribute to biofilm growth in your water distribution system. Furthermore, Pall pre-filtration technologies help
to protect your point-of-use (POU) filters from reduced longevity due to high particulate contamination.
Flow reduction or blockage of POU filters before their maximum lifetime is a strong indicator of heavy colloid and/or particulate load in your water distribution
system and highlights a need to perform additional water profile tests on the water quality such as silt density tests (SDI).
Pall Medical offers technical services such as SDI testings in your facilities. Based on those tests, suitable pre-filtration technologies can be selected from
a large Pall pre-filter portfolio. A selection of Pall pre-filtration technologies are described below. For further information, as well as ordering information,
please contact your local Pall Medical office.

Product name
Product description

Marksman PFT Series Filters


Larger cartridge geometry
High flow capacity, suited for hot water
Poly-fine II proprietary media for highly consistent
filtration
Inside-out flow traps contaminant inside the element

Starclear Filter Technology


Unique composite membrane
Retention threshold: 99.98% for particles of 0.5 m
Flow rate: 16.7 L/min (4.4 gallons/min) with a per
25 cm (10 in) pressure drop of 100 mbar (40.1 in)

Product name
Product description

Coreless Filter Elements


Large diameter cartridge utilizing low differential
pressure media
Small, cost efficient system (low capital, installation
and maintenance costs)
Separate stainless steel core providing high flow rate
and ease of fitment

Ultipleat HighFlow System


High flow rate up to 115 L/min (30.4 gallons/min)
Assures strong reduction of solid contaminants
from potable water
Allows significantly fewer filters and smaller housings
for high flow applications

www.pall.com/medical

In-Line Capsule Filtration


Pall Kleenpak capsules are durable and compact filter capsules available with a broad range of filter media and in four different sized formats designed
for a variety of applications.
A small selection of Posidyne membrane procedures are described below, but for further options available, please contact your local sales office.

Product Name
Order code I Description

Packaging
Membrane area (nominal)

Flow rates (nominal)

Length (excluding quick


connect adaptors
- nominal)
Maximum temperature
exposure
Maximum upstream
operating pressure
Maximum continuous
influent water temperature

Pall Kleenpak Capsule Filter with 0.2 m Posidyne Membrane


KA2NFZP4
With 6 mm (0.2 in) Walther male connectors
KA3NFZP5
With 12 mm (0.5 in) Walther male connectors
N.B. Other capsule sizes and connection variants are available.
For further information contact your local sales office.
1 unit per case
KA2NFZP4
910 cm2 (141.1 in2)
KA3NFZP5
2,300 cm2 (356.5 in2)
KA2NFZP4
5.0 L/min (1.3 gallons/min) at 20 C (68 F) at 0.9 (13.1 psi)
bar dp differential pressure
KA3NFZP5
10.0 L/min (2.6 gallons/min) at 20 C (68 F) at 0.7 (10.2 psi)
bar dp differential pressure
KA2NFZP4
150 mm (5.9 in)
KA3NFZP5
160 mm (6.3 in)
40 C (140 F)
5.2 (75 psi) bar at 20 C (68 F)
4.0 (58 psi) bar at 40 C (140 F)
40 C (140 F)

www.pall.com/medical

10

QPData
Product description
Order code I Description

Custom software data management tool for water filter traceability


QPData Full Service and Support Mode (Annual Fee)
QPDATA1
QPData Pre-loaded and Configured Smartphone
QPDATA2
QPData Paired and Compatible Scanner
QPDATA3
QPData Customer Smartphone Configuration
QPDATA4

Please note:
Data SIM card and/or contract is not included. The warranty of any hardware supplied by Microsec
and/or Pall is limited to the Manufacturers warranty.

Water Testing
Particle Analysis in Water Distribution Systems
Water distribution systems, particularly in older or large buildings may contain high levels of organic and inorganic material in the form of particles (such as,
sand, silicates, rust) and colloids. Those water contaminants may contribute to biofilm formation or be derived from already established biofilm within the
system. The particulate load in the water may visibly change the water colour. The turbidity of the water represents an indicator of the particulate/colloidal
concentration in the system.
Particulate and colloidal load in water distribution systems can be analyzed using the Silt Density Index test (SDI). Pall Life Sciences offers SDI testing in your facilities
by our specialists. Based on the individual review of the SDI report, system specific and cost effective prefiltration technologies can be selected from a large
Pall pre-filter portfolio in order to deliver maximum benefits for your water distribution system. Please contact your local Pall representative in order to find out
if an SDI test can be performed in your facility.
Please note: Flow reduction or blockage of POU sterilizing grade filters before their intended lifetime may indicate a high particulate
load in the water distribution system.

Filter Replacement
Pall Medical offers service to exchange Pall point-of-use filters and large-scale prefilter cartridges in your facility.
Due to the use of quick connectors, point-of-use filter exchange can be performed easily within seconds by trained cleaning or facilities maintenance staff,
nursing staff, or other trained persons. However, if desired and where possible, Pall Medical offers the option to exchange filters in your facility. This can be
performed using professional external technical service and cleaning companies in your area.
The exchange of Pall large-scale prefilter cartridges in cooperation with the technician in your facility may also be available.
Please contact your local Pall sales office in order to obtain more information about the availability of filter
exchange services in your area.

Turnkey Program
In some locations, Pall Medical offers a Turnkey Program that includes particulate water testing, microbial water analysis, filter replacement and
additional services.
Please contact your local sales office in order to obtain detailed information about this program and availability
of this service in your area.

www.pall.com/medical

11

PCR Technology

Product name
Product description

Ordering information

Technical data

Pall GeneDisc System


Real time Legionella risk management using the latest PCR technology Quantified results within 3 hours, all inclusive
product from sample to result, closed real-time PCR with minimised operator intervention, user-friendly software with direct
display of results, simultaneous read out of Legionella spp. and L. pneumophila, seamless data transfer.
Reorder code
Description
Sample Number Packaging
EGDCV3A
GeneDisc Cycler Base-Unit
1 disc
Single unit
EGDSV3A
GeneDisc Cycler Sub-Unit
1 disc
Single unit
EGDDE01EU
GeneDisc DNA-Extractor
Single unit
EGDUL1A230
GeneDisc Ultra-Lyser
Single unit
EGDUL1A120
GeneDisc Ultra-Lyser
Single unit
PBIOP2100
Extraction Pack Qualitative assays
100
100 unit
PENVI1096
Extraction Pack Environmental 1
96
96 units
GLEGPNE106006
GeneDisc Legionella pneumophila Quantification
30
6 plates
GLEGSPP106006
GeneDisc Legionella spp. Quantification
30
6 plates
GLEGPNE112006
GeneDisc Legionella pneumophila Quantification
66
6 plates
GLEGDUO106006
GeneDisc Legionella DUO Quantification
30
6 plates
GLEGOID106006
GeneDisc Legionella DUO Identification
36
6 plates
GLEGOID112006
GeneDisc Legionella DUO Identification
72
6 plates
ALEGPNE105
Legionella pneumophila Calibrated DNA
5 units
Total turnaround time
<3 hours
PCR cycle time
<1 hour

For information on the analytical discs, please contact your local sales office or visit www.pall.com.

www.pall.com/medical

12

Infusion Filters

Product name
Product description
Order code I Description

Packaging

Volume

Membrane
Filter and tubing
Special features
Maximum filter life
Information for use

Pall Nanodyne ELD Filter


Infusion filter with endotoxin-retentive
Posidyne membrane
ELD96LLCE
0.9 mm ID microbore tubing,
slide clamp, luer connectors
ELD96LYLE
0.9 mm ID microbore tubing,
slide clamp, luer connectors,
Y-injection site
ELD96LYLSE
3.0 mm ID standard bore tubing,
slide clamp, luer connectors,
Y-injection site
ELD96NTE
Luer connectors, without tubing
40 units per case (ELD96NTE)
50 units per case (ELD96LLCE,
ELD96LYLE, ELD96LYLSE)
2 mL plus tubing volume

Pall Nanodyne NEO Filter


Infusion filter with endotoxin-retentive
Posidyne membrane and small volume
NEO96E
0.5 mm ID ultra-microbore tubing,
slide clamp, luer connectors
NEO96NYE
0.5 mm ID ultra-microbore tubing,
slide clamp, luer connectors
Y-piece for needleless connection

Pall Supor AEF Filter


Infusion filter with low-protein-binding
Supor membrane
AEF1E
0.9 mm ID microbore tubing,
slide clamp, luer connectors
AEF1NTE
Luer connectors, without tubing

50 units per case

50 units per case

0.4 mL

0.2 m Posidyne membrane


Non-phthalate fluid pathway,
free of latex
Air elimination
96 h
Single patient use

0.2 m Posidyne membrane


Non-phthalate fluid pathway,
free of latex
Air elimination
96 h
Single patient use

AEF1E
1.0 mL
AEF1NTE
0.7 mL
0.2 m Supor membrane
Non-phthalate fluid pathway,
free of latex
Air elimination
24 h
Single patient use

www.pall.com/medical

13

Infusion Filters (continued)

Product name
Product description

Pall Lipipor TNA Filter


Filter for lipid-containing solutions for
parenteral nutrition

Order code I Description

TNA1E
0.9 mm ID microbore tubing,
luer connectors

Pall Lipipor TNA Filter


Filter for lipid-containing solutions for
parenteral nutrition allows for
infusion under gravity
TNA2E
3.0 mm ID standard bore tubing,
slide clamp, luer connectors

Packaging
Volume

50 units per case


2.3 mL

50 units per case


12 mL

Membrane
Filter and tubing

1.2 m Polyamide membrane


Non-phthalate fluid pathway,
free of latex
Air elimination
24 h
Single patient use

1.2 m Supor membrane


Non-phthalate fluid pathway,
free of latex
Air elimination
24 h
Single patient use

Special features
Maximum filter life
Information for use

Pall Lipipor NEO and Lipipor NLF Filters


Infusion filters for lipid-containing
solutions for parenteral nutrition in
paediatric and neonatal patients
NLF1E
0.9 mm ID microbore tubing,
small volume, slide clamp,
luer connnectors
NLF2E
0.9 mm ID microbore tubing,
slide clamp, luer connectors
NLF2NTE
Luer connectors, without tubing
50 units per case
NLF1E
0.5 mL
NLF2E
0.8 mL
NLF2NTE
0.7 mL
1.2 m Supor membrane
Non-phthalate fluid pathway,
free of latex
Air elimination
24 h
Single patient use

www.pall.com/medical

14

Pharmacy Filtration Devices

Product name

Pall PharmAssure Syringe Filter

Product description

Syringe filter for drug preparation and


intravenous, epidural and subcutaneous
syringe bolus drug administration
Low protein binding
Extensive drug compatibility
25 mm (HP1002, HP1004, HP1008,
HP1012, HP1050)
32 mm (HP4642, HP4644, HP4648,
HP4640)
50 units per case
HP1002, HP4642
0.2 m Supor membrane
HP1004, HP4644
0.45 m Supor membrane
HP1008
0.8 m Supor membrane
HP1012, HP4648
1.2 m Supor membrane
HP1050, HP4640
5.0 m Supor membrane
Acrylic
25 mm (HP1002, HP1004, HP1008,
HP1012, HP1050)
32 mm (HP4642, HP4644, HP4648,
HP4640)
Luer connectors (m/f)

Order code I Description

Packaging
Membrane | Pore size

Housing
Housing diameter

Connectors
Membrane area

Volume

Free of latex

2.8 cm2 (HP1002, HP1004, HP1008,


HP1012, HP1050)
5.3 cm2 (HP4642, HP4644, HP4648,
HP4640)
<0.85 mL (HP1002, HP1004, HP1008,
HP1012)
<1.0 mL (HP4642, HP4644, HP4648,
HP4640, HP1050)
Yes

Pall PharmAssure 25 mm Hydrophobic


Vent Filter
Vent filter for sterile venting of sterile
drug containers

Pall PharmAssure Dispensing Pin


Spike for sterile venting of drug
containers when sampling fluids and
for the retention of pharmaceutical dust
and aerosols from the venting system

HP2002

HP2402

50 units per case


0.2 m hydrophobic acrylic copolymer

50 units per case


0.2 m hydrophobic venting
membrane

Acrylic
25 mm

Acrylic
n/a

Luer connectors (m/f)


2.8 cm2

Luer connector (f)


Dual lumen male spike
1.0 cm2

n/a

n/a

Yes

Yes

www.pall.com/medical

15

Breathing System Filters

Product name
Product description

Pall Ultipor 25 Breathing System Filter


Breathing system filter for anaesthesia also suitable for
low tidal volumes

Pall Ultipor 100 Breathing System Filter


Breathing system filter for anaesthesia and
intensive ventilation

Order code I Description

BB25
With monitoring port
BB25G
With monitoring port (bulk pack)
BB25S
With monitoring port, sterile
BB25GS
With monitoring port, sterile
(bulk pack)
BB25F
With monitoring port, flex tube
and flex tube cap
BB25FG
With monitoring port, flex tube
and flex tube cap (bulk pack)
BB25FS
With monitoring port, flex tube
and flex tube cap, sterile
BB25FU
With monitoring port and flex tube
BB25FGU
With monitoring port and flex tube
(bulk pack)
BB2000AP
With monitoring port, expandable
catheter mount (with two straight
connectors) and catheter mount cap
BB2000APS
With monitoring port, expandable
catheter mount (with two straight
connectors) and catheter mount
cap, sterile

BB100E
BB100ES
Sterile
BB100EF
With flex tube and flex tube cap
BB100EFS
With flex tube and flex tube cap, sterile
BB100P
With monitoring port
BB100PS
With monitoring port, sterile
BB100PF
With monitoring port, flex tube and flex tube cap
BB100PFS
With monitoring port, flex tube and flex tube cap, sterile

Packaging

50 units per case (BB25, BB25S, BB25F, BB25FS, BB25FU,


BB2000AP, BB2000APS, BB2000APN, BB25D, BB25Y, BB25N)
200 units per case (BB25DG, BB25CG)
250 units per case (BB25G, BB25FG, BB25FGU, BB25NG)
300 units per case (BB25GS)
Hydrophobic media manufactured using silicone resin
bonded man-made mineral fibres

Bulk pack

Filter media

BB2000APN
With monitoring port, expandable
catheter mount (with two straight
connectors), and fixed non-ported
elbow
BB25D
With monitoring port, flex tube
and fixed non-ported elbow
BB25DG
With monitoring port, flex tube
and fixed non-ported elbow (bulk
pack)
BB25Y
With monitoring port, and catheter
mount (with straight connector at
the filter end and fixed elbow, with
access port and cap, at the
patient end)
BB25CG
With monitoring port and catheter
mount (with straight connector at
the filter end and fixed, non-ported elbow connector at the patient
end). (bulk pack)
BB25N
With monitoring port and fixed,
non-ported elbow
BB25NG
With monitoring port and fixed,
non-ported elbow (bulk pack)

50 units per case


-

35 mL
100%

Composite media comprised, on the patient side, of a


hydrophobic layer manufactured using silicone resin
bonded man-made mineral fibres and, on the machine
side, an integral hydrophilic cellulose layer
85 mL
100%

>99.999%

99.999%

Weight
Recommended use

Approx. 1.5 cm H2O


Approx. 3.5 cm H2O
Patient end 15 mm female / 22 mm male
Machine end 22 mm female / 15 mm male
26 g
Patient end use only, max. 24 h, single patient use

Free of latex

Yes

Approx. 1 cm H2O
Approx. 2 cm H2O
Patient end 15 mm female / 22 mm male
Machine end 22 mm female
47 g
Patient end use only, max 24 h if nebulisation is used, use may
be extended to a maximum of 48 hours when nebulisation is not
used, single patient use
Yes

Filter volume
Filtration efficiency for
liquidborne bacteria/viruses
Filtration efficiency for
airborne bacteria/viruses
Resistance @ 30 L/min
Resistance @ 60 L/min
Filter ISO connectors

www.pall.com/medical

16

Breathing System Filters (continued)

Product name
Product description

Pall Breathing System Filter


Breathing system filter for anaesthesia

Pall BB50 Breathing System and Gas Line Filters


Machine end breathing system and gas line filters

Order code I Description

BB22-15
BB22-15G
(bulk pack)
BB22-15S
Sterile
BB22-15F
With flex tube and flex tube cap
BB22-15M
With monitoring port
BB22-15MG
With monitoring port (bulk pack)
BB22-15MS
With monitoring port, sterile
BB22-15MF
With monitoring port, flex tube and flex tube cap
BB22-15MFS
With monitoring port, flex tube and flex tube cap, sterile
50 units per case

BB50TE
Machine end applications in breathing systems and
gas line applications
BB50TBL
Gas line applications
BB50TES
For machine end applications in breathing systems and
gas line applications (e.g., insufflation), sterile
BB50TESD
BB50TES in double pouch
BB50TP
As per BB50TE applications but also for use with
Puritan Bennett oxygen concentrators

Packaging

250 units per case


Hydrophobic media manufactured using silicone resin
bonded man-made mineral fibres
Approx. 90 mL
100%

25 units per case (BB50TESD)


50 units per case (BB50TE, BB50TTBL,
BB50TES, BB50TP)
Hydrophobic media manufactured using silicone resin
bonded man-made mineral fibres
Approx. 90 mL
100%

>99.999%

>99.999%

Weight
Recommended use

Approx. 1 cm H2O
Approx. 2.5 cm H2O
Patient end 15 mm female / 22 mm male
Machine end 22 mm female / 15 mm male
43 g
Max. 24 h single patient use

Free of latex

Yes

Approx. 1 cm H2O
Approx. 2 cm H2O
Patient end 22 mm male
Machine end 22 mm female
39 g
BB50TE, BB50TP, BB50TES, BB50TESD: Max. 24 h
in connection with a high-efficiency HME (heat and
moisture exchanger) extended use may be permitted
Yes

Bulk pack
Filter media
Filter volume
Filtration efficiency for
liquidborne bacteria/viruses
Filtration efficiency for
airborne bacteria/viruses
Resistance @ 30 L/min
Resistance @ 60 L/min
Filter ISO connectors

www.pall.com/medical

17

Lung Function Diagnostic Filters

Product name
Product description
Order code I Description

Packaging
Bulk pack
Filter media
Filter volume
Cross contamination
reduction efficiency
Resistance @ 12 L/sec
Connectors
Weight
Recommended use
Free of latex

Pall Pro-Tec Filter for Pulmonary Function Testing


Filter for lung function diagnostics
PF30S
30 mm female connector
PF30SG
30 mm female connector (bulk pack)
PF30SJE
Modified 30 mm female connector
PF30SJG
Modified 30 mm female connector (bulk pack)
25 units per case
250 units per case
Polypropylene
Approx. 40 mL
99.9999%

25 units per case


Polypropylene
Approx. 40 mL
99.9999%

0.6 cm H2O
30 mm female or 30 mm modified female depending
upon variant
26 g
Single patient use
Yes

0.6 cm H2O
30 mm female or 30 mm modified female depending
upon variant
26 g
Single patient use
Yes

Pall Pro-Tec Filter Kit for Pulmonary Function Testing


Filter kit for lung function diagnostics
PF30KIT1
PF30S including mouthpiece and nose clip
PF30KIT2
PF30SJE including hard plastic mouthpiece
PF30KIT3
PF30SJE including mouthpiece and nose clip

www.pall.com/medical

18

Minimally Invasive Surgery Filters

Product name

Pall Insufflator Gas Line Filter

Product description

Filter set for insufflation gases

Order code I Description

IGF1
7.5 cm silicone tubing and luer
connector inlet (f),
52.5 cm silicone tubing and luer
connector outlet (m), sterile double
peel-pouch
IGF1E
7.5 cm PVC tubing and luer connector
inlet (f), 52.5 cm PVC tubing and
luer connector outlet (m), sterile
double peel-pouch
IGF1L
7.5 cm PVC tubing and luer connector
inlet (f), 250 cm PVC tubing and luer
connector outlet (m), sterile double
peel-pouch
IGF1M
7.5 cm PVC tubing and luer connector
inlet (m), 250 cm PVC tubing and
luer connector outlet (f), sterile
single peel-pouch
IGF1C
7.5 cm PVC tubing and suction
connector inlet (f), 250 cm PVC tubing
and luer connector outlet (m), sterile
single peel-pouch
IGF1CD
7.5 cm PVC tubing and suction
connector inlet (f), 250 cm PVC tubing
and luer connector outlet (m), sterile
double peel-pouch
IGF1K
10 cm silicone tubing and luer
connector inlet (f), 10 cm silicone
tubing and luer connector outlet (m),
10 cm silicone tubing, sterile single
peel-pouch
20 units per case
Hydrophobic media manufactured
using silicone resin bonded man-made
mineral fibres

Packaging
Filter media

Housing
Tubing
Bacteria filtration efficiency
(airborne)
Viral filtration efficiency for
viruses (airborne)

Acrylic
PVC or silicone depending upon
variant
>99.999%
>99.99%

High flow insufflation set with high


efficiency hydrophobic Pall gas filter
Insufflator filter set for high flow
applications
FRIGF2
3 m PVC tubing, sterile double
peel-pouch

Pall LaparoShield Laparoscopic


Smoke Filtration System
Filtration system for smoke generated
during laparoscopic surgery
LSF1
Approximately 45 cm PVC tubing
and clamp, male luer connector
with rotating collar, sterile double
peel-pouch
LSF2
Male luer connector with rotating
collar, sterile double peel-pouch

20 units per case


PTFE

Acrylic
PVC

10 units per case


Pre-filtration layers - glass fibre,
polyester, acrylic; Membrane layers polytetrafluoroethylene (PTFE).
Chemical absorbant layers - activated
carbon; Film layers - ethylene vinyl
acetate (EVA)
Polyester
PVC, EVA

>99.9999% with test organism


Brevundimonas diminuta
>99.999% with test organism
Bacteriophage MS-2

>99.999% with test organism


Brevundimonas diminuta
>99.999% with test organism
Bacteriophage MS-2

www.pall.com/medical

19

Medical Gas Filters

Product name
Product description
Order code I Description

Pall Oxygenator Gas Line Filter


Bacteria, viral and particulate removal filter for
medical gases
ORO1H
1/4 in. tubing connections

Packaging

40 units per case

Filter membrane

Hydrophobic media manufactured using silicone resin


bonded man-made mineral fibres

Housing

Acrylic

Tubing
Bacteria filtration efficiency
(airborne)
Viral filtration efficiency for
viruses (airborne)

n/a
>99.999%
>99.99%

Pall Gas Line Filter


Bacteria, viral and particulate removal filter for
medical gases
BRO1
in. 3/16 in. tubing connections
BRO12
in. tubing connections
BRO18
3/16 in. tubing connections
BRO18T
3/16 in. tubing connection, 7.5 cm silicone tubing
BRO9T
3/16 in. tubing connection, 7.5 cm silicone tubing
BRO25
in. - 3/8 in. tubing connections
40 units per case
(BRO9T 100 units per case)
Hydrophobic media manufactured using silicone resin
bonded man-made mineral fibres
(BRO9T Acrylic co-polymer/Nylon)
BRO1
Acrylic
BRO12
Polypropylene
BRO18
Polypropylene
BRO18T
Polypropylene
BRO9T
Acrylic
BRO25
Polypropylene
BRO9T, BRO18T Silcone
>99.999%
(except BRO9T)
>99.999%
(except BRO9T)

www.pall.com/medical

20

Visit us on the Web at www.pall.com/medical


Pall Corporate Headquarters
25 Harbor Park Drive
Port Washington
NY 11050
USA

International Offices
Pall Corporation has offices and plants throughout the world in locations such as: Argentina, Australia, Austria, Belgium,
Brazil, Canada, China, France, Germany, India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands,
New Zealand, Norway, Poland, Puerto Rico, Russia, Singapore, Spain, Sweden, Switzerland, Taiwan, Thailand, the
United Kingdom, the United States, and Venezuela. Distributors in all major industrial areas of the world. To locate the
Pall office or distributor nearest you, visit www.pall.com/contact. This document is not for distribution in the USA.

(877) 367-7255
safewater@pall.com

The information provided in this literature was reviewed for accuracy at the time of publication. Product data may
be subject to change without notice. For current information consult your local Pall distributor or contact Pall directly.
Part numbers quoted are protected by the Copyright of Pall Europe Ltd.

phone
email

Pall European Headquarters


Avenue de Tivoli 3
1700 Fribourg
Switzerland
+41 (0)26 350 53 00
safewater@pall.com

phone
email

Pall Asia-Pacific Headquarters


1 Science Park Road, #05-09/15
East Wing, The Capricorn
Singapore Science Park II, Singapore 117528
+65 6388 8688
safewater@pall.com

phone
email

2013, Pall Corporation. Pall,


, GeneDisc, Kleenpak, LaparoShield, Lipipor, Marksman, Nanodyne, Pall-Aquasafe,
PharmAssure, Poly-Fine, Posidyne, Pro-Tec, QPoint, Starclear, Supor, and Ultipor are trademarks of Pall Corporation.
indicates a trademark registered in the USA. TM indicates a common law trademark. Filtration.Separation.Solution.
is a service mark of Pall Corporation.
PRESTO is a trademark of PRESTO Group.
DELABIE is a trademark of DELABIE.

07/13, PDF, GN12.8350

09.4289d EU

Potrebbero piacerti anche