Sei sulla pagina 1di 4

Paper Key Data (written by corresponding author)

a
daaam paper type
template 2011
I am place holder

1_File name (dpn_a_no_familyname):


2_Corresponding Author (dpn_familyname_name):
3_Email address:
4_Title of Paper (textual name of paper):
5_All authors of Paper - Please write authors names obligatory with 26 letters from English
alphabet only! (Without diacritical marks!) (dpn_familyname_name / dpn_familyname_name /):
6_Key words (key_word_1 / key_word_2 / ):

Abstract: Abstract of 50-120 words (9 pt, italic) yyy yyy yyy yyy
yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy
Please use this file as a template to write your paper. On the
top of this page is table. Fill out the table with key paper data
but dont change anything else! yyy yyy yyy yyy yyy yyy yyy
yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy
yyy yyy
Key words: List 4-5 keywords (9 pt, italic, 5 words max)

1. INTRODUCTION (10 PT, CAPITALS, BOLD)


(9 pt, normal) The paper must be written in English. Each
paper must give the clear answers on 5-What questions:
1) What is the problem (problem statement)?
2) What have been done by other people (literature - critical
overview)?
3) What have I done (research course, method used, and
technical solutions)?
4) What are new (results)?
5) What to do as next (further research)?

2. PUBLISHING STEPS
For authors we organised one place from which they can
make all publishing steps. This place has nice historical name
- Scriptorium (Scriptorium is a room in a monastery set aside
for the copying, writing, or illuminating of manuscripts and
records.). Our scriptorium is organized on home page go there:
http://www.daaam.com/daaam/Scriptorium/Scriptorium.htm
study it and make step by step your daaam paper. We wish you
nice, creative, inspirative and successful stay in scriptorium.
Corresponding author is main author of the paper, he
submitting the paper and takes care about everything related to
the publishing and presenting of paper.

3. INFORMATION
3.1 Layout (9 pt, bold)
The paper has to be written in .docx format.
Use DIN A4 Format (297 x 210 mm).
Margins: top, bottom, left and right 20 mm each.
2 columns, column distance 7 mm.
Both columns on the first and second page must be
finished exactly at the bottom of the page.
Use Times New Roman fonts, line spacing single. The font
formats are: paper title: 12 pt bold, capital letters; author's
name(s): 10 pt bold; key words: 9 pt, italic; chapter titles:
10 pt bold, capital letters left justified; subtitles: 9 pt bold,
numbered, left justified, upper and lower case; text: 9 pt
The paper is restricted to two full A4 pages like this
template. Use the whole space! The paper must finish
sharp at the end of second page!
Avoid leaving a heading at the bottom of a column, with the
subsequent text starting at the top of the next page/column. Use
extra spacing (between earlier figures or sections) to push the
headings up to the top of the same column as its text. In view of
the tight page constrains, however, do please make the fullest
possible use of the text area.
Paragraphs should be justified, using single spacing.
3.2 Language, Style Spelling
Use common technical terms. Do not try to create new
English words. Spelling: Follow Merriam Websters Collegiate
Dictionary, Longman or Oxford Dictionaries.
3.3 Visual Aids at Symposium
Computer and beamer for Power Point Presentations.

4. UPLOADS
The publishing steps are explained in Scriptorium. Please
read carefully and follow the steps. Additionally it is very
important to follow the next three instructions:
Uploading of a Paper and photos of authors is organised
over: http://www.conftool.com/daaam2011/.
Every author, co-author and all other people involved in
daaam activities during 2011 must be members of daaam
for 2011. Only members can take part in daaam activities!
Upload your paper (photos of authors) to your Conftool
Account. Use menu Your Submission for upload of
Paper. This is only way how you can submit your Paper for
DAAAM-2011.
After each upload inform daaam about upload over form
"corresponding author informs"
Those Papers which are not prepared exactly according to
the instructions and the template will not be accepted, and not
published.

5. QUESTIONS? PROBLEMS?
Questions? Problems? Dilemmas? Related to the publishing
of this paper. Please contact us from http://www.daaam.com or
from "Scriptorium" over form "Corresponding author informs".
Please dont use other channels (e-mail, fax, phone) for the
communication related to the publishing of paper.

6. TABLES
Place table at the top or bottom of a column wherever
possible, as close as possible to the first reference to it in the
paper. The horizontal size of table is 81 mm.

Tab. 1. Title of table, left justified, subsequent text indented

7. FIGURES
Figures have to be made in high quality, which is suitable
for reproduction and print. Check photos and color prints on the
quality of black white reproduction. Text on the figures must be
readable. The figures have to be placed at the top or bottom of a
column wherever possible, as close as possible to the first
reference to them in the paper. Put the figures in the frame with
81 mm. In extreme case the figures can be putted in the frame
with 169 mm over both columns.

Fig. 1. Title of figure, left justified, subsequent text indented

8. EQUATIONS
Equations are aligned centred and numbered consecutively,
from 1 upwards.

a2 +b2 =c

(1)

9. REFERRING
If a publication is referred to in the text, enclose the
authors name and the date of publication within the brackets.
For one author, use the authors surname and the date (Kusiak,
2009). For two authors, give both names & the date (Ueda &
Kusiak, 2007). For three or more authors, use the first author,
plus et al., and the date (Katalinic et al., 2010). If giving a list
of reference, separate them using semicolons.

10. INDEXING AND CITING OF DAAAM PAPERS


The best papers of the symposium will be published in
extended form in the DAAAM International Scientific Book,
hard cover, ISSN 1726-9687, and in the International Journal of
Simulation
Modelling,
ISSN
1726-4529
(http://www.ijsimm.com). Contributions in DAAAM Scientific
Book and DAAAM International Journal of Simulation
Modelling will be cross-referenced and available on Internet
under DAAAM International DOI:10.2507 Suffix.
Annals of DAAAM and Proceedings of International
DAAAM Symposium are since 2002 indexed in the Thomson
Reuters ISI ProceedingsSM which is now the Conference
Proceedings Citation IndexSM -- an integrated index within Web
of Science. Conference Proceedings Citation Index, accessed
via Web of Science, helps researchers access the published
literature from the most significant conferences, symposia,
seminars, colloquia, workshops, and conventions worldwide.
This resource offers a complete view of conference proceedings
and their impact on global research, letting you use cited
reference searching to track emerging ideas and new research
beyond what is covered in the journal literature. Two editions
cover the sciences and social sciences.
The papers published in these Proceedings are available at
Thomson Gale.
DAAAM International Scientific Book ISSN 1726-9687,
and Annals of DAAAM and Proceedings of International
DAAAM Symposium ISSN 1726-9679 are since 2009 indexed
in the EBSCO bibliographical database.

Author(s) who submit manuscripts agree that the DAAAM


international editor 2011 (B[ranko] Katalinic) receives a full
and exclusive, worldwide, perpetual, non-revocable and
transferable license under copyright in the submitted work. The
licence especially covers, without limitation, all rights to make
the article available in the internet or databases or to cite to
reference, to cross-reference, to publish, reproduce and
distribute the article. However the author(s) are entitled to make
the following use of their work:
(1)
to republish the article in any publication of which
they are an author or editor after the work has been
published by the DAAAM editor.
(2)
to photocopy the article and distribute such
photocopies and distribute the electronic versions of the
article for personal or professional use, provided that any
such copies are not offered for sale.
(3)
to make oral presentations of the work in any forum.
Any of the above mentioned use of the work must explicitly
identify prior publication in the Annals of DAAAM for 2011 &
Proceedings of the 22nd International DAAAM Symposium,
ISSN 1726-9679, ISBN 978-3-901509-83-4, Editor B[ranko]
Katalinic, Published by DAAAM International, Vienna, Austria
2011, including page numbers.

11. CONCLUSION
Please enjoy your stay in Scriptorium, make step by step
read these instructions carefully. Prepare your paper and data
exactly according to the instructions. That is the easiest and the
most efficient way to have: a good published paper, clear
presentation and successful symposium. We are looking
forward to meet you in Vienna, Austria, November 2011.

12. ACKNOWLEDGEMENTS
Here you can thank to the people and institutions. Please
write here if your paper is result of research in the frame of one
grant or other public or private project.

13. REFERENCES
References have to include at least 5 items. Don't include
only your publications! The list of references has to be arranged
alphabetically according to the first author, subsequent lines
indented. Proceedings and books from more authors must have
editor name. If there are more than one paper by the same
author(s) and with the same date, label them a, b, etc. Please
note that all references listed here must be directly cited in the
body of the text. Citing from DAAAM Annals & Proceedings,
2010, 2009, 2008, Scientific Book and IJSIMM are welcome.
Better to cite too often than not often enough.
Alabar, B.; Kusiak, A. & Nanasi, J. (2007). Name of Book in
Italics, Publisher, ISBN, Place of Publication
Katalinic, B.; Park H. S. & Udiljak T. (2010). Name of Paper,
Available from: http://www.exact-address-of-site Accessed:
YYYY-MM-DD
Kataumo, B.; Kusiak, A. & Nanasi, J. (2005). Title of
conference paper, Proceedings of xxx xxx, conference data,
location, ISSN, ISBN, Katalinic, B. (Ed.), pp. 14-17,
Publisher, City
Kusiak, A. (2006). Name of paper. Name of Journal in Italics,
Vol., No., (month and year of the edition) page numbers
(first-last), ISSN
Ueda, K. & Kusiak, A. (2009). Name of paper, In: Name of
Book in Italics, Name(s) of Editor(s), (Ed.), page numbers
(first-last), Publisher, ISBN, Place of publication

*** (2006) http://www.insse.ro - The National Statistics


Institute, Statistics Year Book, Accessed on: 2009-0813

*** (2001) RFID machine vision drive gains at Sony ASAP


Hitchcook Publishing Company Assembly, pg.68, ISSN:
1050-8171, Vol 38, No.4, April 2009

Potrebbero piacerti anche