Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Curing Schedules
Corro-Coat MX 1011695 is formulated for curing condition 180C/10 min object temperatures.
For detailed information please contact a technical or sales representative at Jotun Powder
Coatings.
Colour shade name
RAL 9005
(Colour matching with MacbethColor-Eye 3100, software Largo Match 2000)
Finish
Fine texture
Gloss 1-3 % (angle 60 measured according to EN ISO 2813)
Powder Application
Corro-Coat MX 1011695 is available for Corona and Tribo charging equipment. For Corona
equipment is recommended charging voltage 40-90 kV.
Recommended film thickness
60-100 m
Storage Conditions
Keep in a dry cool area. Maximum temperature 25C. Maximum relative humidity 60%.
Page 1
Technical Data
The technical data provided below are typical for Corro-Coat MX 1011695 applied to 0.8mm cold
rolled steel panels (60 micron film thickness). Tests marked * were done on 0.8mm zincphosphated cold rolled steel panels. Typical values when tested have not necessarily been
recently revised.
Description
Adhesion
Impact resistance
Cupping test
Flexibility (conical
mandrel)
Film Hardness
(Buchholz)
Pencil hardness
*Salt spray resistance
Norm
EN ISO 2409 (2mm)
ASTM D 2794 (5/8 ball)
EN ISO 1520
ASTM D 522
Typical values
Gt 0 Cross-cut rating (100% adhesion)
20 inch-pounds without film cracking
> 5mm without film cracking
< 6mm without film cracking
EN ISO 2815
N/a
ASTM D 3363
ASTM B 117
N/a
Excellent. Measured with respect to
blistering and adhesion loss.
1,54 0,01 kg/dm3
Approximately 10,8 m2/kg at recommended
film thickness of 60 m
Specific gravity
Theoretical yield
Particle Size
Distribution
Malvern 2000
Particles >80m
Particles <10m
Average particle size
<22 %
<12 %
40-46 m
Note: This Technical Information is given to the best of the manufacturers knowledge, based on
laboratory testing and practical experience. However, as the product is often used under
conditions beyond the manufacturers control, only the quality of the product itself can be
guaranteed. Jotun Powder Coatings reserves the right without notice to alter or change the
content of this Technical Information Sheet.
Jotun Powder Coatings
Revised by Vlastimil Brabec, October 2014
Page 2