Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ISO/IEC 18036:2003 - Information technology - Icon symbols and functions for World Wide Web
browser toolbars.
ISO/IEC 24756:2009 - Information technology - Framework for specifying a common access
profile (CAP) of needs and capabilities of users, systems, and their environments.
ISO/IEC TR 13066-6:2014 - Information technology - Interoperability with Assistive Technology
(AT) - Part 6: Java accessibility application programming interface (API).
ISO/IEC TR 30112:2014 - Information technology - Specification methods for cultural
conventions.
ISO/IEC 24703:2004 - Information technology - Participant Identifiers.
ISO/IEC 19796-3:2009 - Information technology - Learning, education and training - Quality
management, assurance and metrics - Part 3: Reference methods and metrics.
ISO/IEC 20006-1:2014 - BInformation technology for learning, education and training Information model for competency - Part 1: Competency general framework and information
model.
ISO/IEC 29109-1:2009 - Information technology - Conformance testing methodology for biometric
data interchange formats defined in ISO/IEC 19794 - Part 1: Generalized conformance testing
methodology.
ISO/IEC 24713-3:2009 - Information technology - Biometric profiles for interoperability and data
interchange - Part 3: Biometrics-based verification and identification of seafarers.
ISO/IEC TR 29144:2014 - Information technology - Biometrics - The use of biometric technology
in commercial Identity Management applications and processes.
ISO/IEC 19794-11:2013/Amd 1:2014 - Conformance test assertions.
ISO/TC 2 - Fasteners
ISO 10669:1999 - Plain washers for tapping screw and washer assemblies -- Normal and large
series -- Product grade A.
ISO 1051:1999 - Rivet shank diameters.
ISO 8752:2009 - Spring-type straight pins - Slotted, heavy duty.
ISO 13337:2009 - Spring-type straight pins - Slotted, light duty.
ISO 273:1979 - Fasteners - Clearance holes for bolts and screws.
ISO 1891:2009 - Fasteners Terminology.
ISO 8839:1986 - Mechanical properties of fasteners - Bolts, screws, studs and nuts made of nonferrous metals.
ISO 7434:1983 - Slotted set screws with cone point.
ISO 7435:1983 - Slotted set screws with long dog point.
ISO 7436:1983 - Slotted set screws with cup point.
ISO 7721:1983 - Countersunk head screws - Head configuration and gauging.
ISO 7721-2:1990 - Countersunk flat head screws - Part 2: Penetration depth of cross recesses.
ISO 10673:2009 - Plain washers for screw and washer assemblies - Small, normal and large
series - Product grade A.
ISO 10644:2009 - Screw and washer assemblies made of steel with plain washers - Washer
hardness classes 200 HV and 300 HV.
ISO 4017:2014 - Fasteners - Hexagon head screws - Product grades A and B.
ISO 10666:1999 - Drilling screws with tapping screw thread - Mechanical and functional
properties.
ISO 15480:1999 - Hexagon washer head drilling screws with tapping screw thread.
ISO 15481:1999 - Cross recessed pan head drilling screws with tapping screw thread.
ISO 15482:1999 - Cross recessed countersunk head drilling screws with tapping screw thread.
ISO 15483:1999 - Cross recessed raised countersunk head drilling screws with tapping screw
thread.
ISO 1478:1999 - Tapping screws thread.
ISO 10683:2014 - Fasteners - Non-electrolytically applied zinc flake coatings.
ISO/TC 4 - Rolling bearings
ISO 492:2014 - Rolling bearings - Radial bearings - Dimensional and geometrical tolerances.
ISO 199:2014 - Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and
tolerance values.
ISO 3096:1996 - Rolling bearings - Needle rollers - Dimensions and tolerances.
ISO 7063:2003 - Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and
tolerances.
ISO 9628:2006 - Rolling bearings - Insert bearings and eccentric locking collars - Boundary
dimensions and tolerances.
ISO 12240-1:1998 - Spherical plain bearings - Part 1: Radial spherical plain bearings.
ISO 12240-2:1998 - Spherical plain bearings - Part 2: Angular contact radial spherical plain
bearings
ISO 12240-3:1998 - Spherical plain bearings - Part 3: Thrust spherical plain bearings
ISO 12240-4:1998 - Spherical plain bearings - Part 4: Spherical plain bearing rod
ISO 6811:1998 - Spherical plain bearings - Vocabulary
ISO 15312:2003 - Rolling bearings - Thermal speed rating - Calculation and coefficients
ISO 76:2006 - Rolling bearings - Static load ratings
ISO 13012-1:2009 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1:
Boundary dimensions and tolerances for series 1 and 3.
ISO 13012-2:2009 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2:
Boundary dimensions and tolerances for series 5.
ISO/TC 5 - Ferrous metal pipes and metallic fittings
ISO 2037:1992 - Stainless steel tubes for the food industry
ISO 1127:1992 - Stainless steel tubes - Dimensions, tolerances and conventional masses per
unit length
ISO 4179:2005 -Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement
mortar lining
ISO 15348:2002 - Pipework - Metal bellows expansion joints - General
ISO/TC 6 - Paper, board and pulps
ISO 4094:2005 - Paper, board and pulps - International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories
ISO 2470-1:2009 - Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part
1: Indoor daylight conditions (ISO brightness)
ISO 8254-1:2009 - Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss
with a converging beam, TAPPI method
ISO 11093-5:2009 - Paper and board - Testing of cores - Part 5: Determination of characteristics
of concentric rotation.
ISO 5631-3:2014 - Paper and board - Determination of colour by diffuse reflectance - Part 3:
Indoor illumination conditions (D50/2 degrees).
ISO 5631-2:2014 - Paper and board - Determination of colour by diffuse reflectance - Part 2:
Outdoor daylight conditions (D65/10 degrees).
ISO 3036:1975 - Board - Determination of puncture resistance
ISO 5626:1993 - Paper - Determination of folding endurance
ISO 5629:1983 - Paper and board - Determination of bending stiffness - Resonance method
ISO 5633:1983 - Paper and board - Determination of resistance to water penetration
ISO 1924-3:2005 - Paper and board - Determination of tensile properties - Part 3: Constant rate
of elongation method (100 mm/min)
ISO 2759:2014 - Board - Determination of bursting strength
ISO/TC 8 - Ships and marine technology
ISO 30000:2009 - Ships and marine technology - Ship recycling management systems Specifications for management systems for safe and environmentally sound ship recycling
facilities
ISO 30003:2009 - Ships and marine technology - Ship recycling management systems Requirements for bodies providing audit and certification of ship recycling management
ISO 24408:2005 - hips and marine technology - Position-indicating lights for life-saving
appliances - Testing, inspection and marking of production units
ISO 15371:2009 - Ships and marine technology - Fire-extinguishing systems for protection of
galley cooking equipment
ISO 17338:2009 - Ships and marine technology - Drawings for fire protection - Indications of fire
rating by divisions for ships and high-speed craft
ISO 13617:2001 - Ships and marine technology - Shipboard incinerators Requirements
ISO 21072-1:2009 - Ships and marine technology - Marine environment protection: performance
testing of oil skimmers - Part 1: Moving water conditions
ISO 21072-2:2009 - Ships and marine technology - Marine environment protection: performance
testing of oil skimmers - Part 2: Static water conditions
ISO 21070:2011 - Ships and marine technology - Marine environment protection - Management
and handling of shipboard garbage
ISO 16304:2013 - Ships and marine technology - Marine environment protection - Arrangement
and management of port waste reception facilities
ISO 17325-1:2014 - Ships and marine technology - Marine environment protection - Oil booms Part 1: Design requirements
ISO 15838:2003 - Ships and marine technology - Fittings for use with gasketed mechanical
couplings used in piping applications - Performance specification
ISO 19921:2005 - Ships and marine technology - Fire resistance of metallic pipe components
with resilient and elastomeric seals - Test methods
ISO 19922:2005 - Ships and marine technology - Fire resistance of metallic pipe components
with resilient and elastomeric seals - Requirements imposed on the test bench
ISO 28520:2009 - Ships and marine technology - Lubricating oil systems - Guidance for grades of
cleanliness and flushing
ISO 28522:2009 - Ships and marine technology - Hydraulic oil systems - Guidance for assembly
and flushing
ISO 28523:2009 - Ships and marine technology - Lubricating and hydraulic oil systems Guidance for sampling to determine cleanliness and particle contamination
ISO 3913:1977 - Shipbuilding - Welded steel bollards
ISO 16273:2003 - Ships and marine technology - Night vision equipment for high-speed craft Operational and performance requirements, methods of testing and required test results
ISO 19018:2004 - Ships and marine technology - Terms, abbreviations, graphical symbols and
concepts on navigation
ISO 6205:1988 - Inland navigation vessels - Customs sealing systems -- Basic technical
requirements
ISO 6219:1983 - Shipbuilding - Inland vessels - Windlasses and anchor capstans
ISO 7606:1988 - Shipbuilding - Inland navigation vessels - Draught scales
ISO 7545:1983 - Shipbuilding and marine structures - Inland navigation - Single-lock automatic
couplings for push tows
ISO 5778:1998 - Ships and marine technology - Small weathertight steel hatches
ISO 16155:2006 - Ships and marine technology - Computer applications - Shipboard loading
instruments
ISO 14885:2014 - Large yachts - Diesel engines for main propulsion and essential auxiliaries Safety requirements
ISO/TC 10 - Technical product documentation
ISO 27668-1:2009 - Gel ink ball pens and refills - Part 1: General use
ISO 27668-2:2009 - Gel ink ball pens and refills - Part 2: Documentary use (DOC)
ISO/TS 128-71:2010 - Technical product documentation (TPD) - General principles of
presentation - Part 71: Simplified representation for mechanical engineering drawings
ISO/TC 17 - Steel
ISO 16918-1:2009 - Steel and iron - Determination of nine elements by the inductively coupled
plasma mass spectrometric method - Part 1: Determination of tin, antimony, cerium, lead and
bismuth
ISO 13933:2014 - Steel and iron - Determination of calcium and magnesium - Inductively coupled
plasma atomic emission spectrometric method
ISO 6931-1:1994 - Stainless steels for springs - Part 1: Wire
ISO 9445-1:2009 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form Part 1: Narrow strip and cut lengths
ISO 9445-2:2009 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form Part 2: Wide strip and plate/sheet
ISO 4998:2014 - Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of
structural quality
ISO 4999:2014 - Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of
commercial, drawing and structural qualities
ISO 15835-1:2009 - Steels for the reinforcement of concrete - Reinforcement couplers for
mechanical splices of bars - Part 1: Requirements
ISO 15835-2:2009 - Steels for the reinforcement of concrete - Reinforcement couplers for
mechanical splices of bars - Part 2: Test methods
ISO 11484:2009 - Steel products - Employer's qualification system for non-destructive testing
(NDT) personnel
ISO/TC 18 - Zinc and zinc alloys - STANDBY
ISO 714:1975 - Zinc - Determination of iron content - Photometric method
ISO 14197:1998 - Aerospace - Airframe spherical roller bearings, single row, self-aligning,
sealed, intermediate duty - Inch series
ISO 14201:1998 - Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2
- Metric series
ISO 14202:1998 - Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 Metric series
ISO 14203:1998 - Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 Metric series
ISO 14207:1998 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light
duty - Inch series
ISO 14206:1998 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch
series
ISO 14204:1998 - Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 Metric series
ISO 14208:1998 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty
- Inch series
ISO 14209:1998 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed,
intermediate duty - Inch series
ISO 14210:1998 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube
design, light duty - Inch series
ISO 14211:1998 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque
tube design, light duty - Inch series
ISO 14212:1998 - Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube
design, extra-light duty - Inch series
ISO 14213:1998 - Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque
tube design, extra-light duty - Inch series
ISO 14214:1998 - Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch
series
ISO 14215:1998 - Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy
duty - Inch series
ISO 14216:1998 - Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy
duty - Inch series
ISO 14217:1998 - Aerospace - Airframe ball bearings, double-row, self-aligning, precision,
sealed, heavy duty - Inch series
ISO 14218:1998 - Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy
duty - Inch series
ISO 14219:1998 - Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed,
heavy duty - Inch series
ISO 14220:1998 - Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty
- Inch series
ISO 14221:1998 - Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed,
light duty - Inch series
ISO 1965:1973 - Aluminium terminal ends for crimping to aircraft aluminium electrical cables
ISO 1949:1987 - Aircraft - Electrical connectors - Design requirements
ISO 1966:1973 - Crimped joints for aircraft electrical cables
ISO 2277:1973 - Static invertors for aircraft
ISO 5866:1983 - Aircraft - 2 and 3A plug-in base change-over relays, Type II, with crimped
connections - Clearance and fixing dimensions
ISO 6859-1:1982 - Aircraft - Proximity switches - Part 1: General requirements
ISO 8668-1:1986 - Aircraft - Terminal junction systems - Part 1: Characteristics
ISO 8668-2:1986 - Aircraft - Terminal junction systems - Part 2: Tests
ISO 8668-3:1994 - Aircraft - Terminal junction systems - Part 3: Detail specification for type 1
system
ISO 8668-4:1993 - Aircraft - Terminal junction systems - Part 4: Detail specification for type 2
system
ISO 8668-6:1994 - Aircraft - Terminal junction systems - Part 6: Detail specification for type 4
system
ISO 8815:1994 - Aircraft - Electrical cables and cable harnesses - Vocabulary
ISO 2635:2003 - Aircraft - Conductors for general purpose aircraft electrical cables and
aerospace applications - Dimensions and characteristics
ISO 7913:1994 - Aerospace - Bolts and screws, metric - Tolerances of form and position
ISO 12281:1999 - Aerospace - Rivets, solid, 100 degrees normal countersunk head, in metallic
material, with or without surface treatment - Dimensions
ISO 3203:1993 - Aerospace - Bolts, normal bihexagonal head, normal or pitch diameter shank,
long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal
to 1 100 MPa - Dimensions
ISO 7961:1994 - Aerospace - Bolts - Test methods
ISO 8280:1993 - Aerospace - Rivets, solid, universal head, metallic material, with or without
surface treatment - Dimensions
ISO 9154:1999 - Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy,
strength class 1 550 MPa - Procurement specification
ISO 9254:1993 - Aerospace - Bolt, normal spline head, normal or pitch diameter shank, long
length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1
100 MPa - Dimensions
ISO 9256:1993 - Aerospace - Bolts, large hexagonal head, normal or pitch diameter shank, long
length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1
100 MPa - Dimensions
ISO 8538:1999 - Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer,
with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa
(at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C
- Dimensions
ISO 5858:1999 - Aerospace - Nuts, self-locking, with maximum operating temperature less than
or equal to 425 degrees C - Procurement specification
ISO 5855-2:1999 - Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts
ISO 5855-1:1999 - Aerospace - MJ threads - Part 1: General requirements
ISO 5855-3:1999 - Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems
ISO 3161:1999 - Aerospace - UNJ threads - General requirements and limit dimensions
ISO 17057:1999 - Aerospace - Rivets, solid - Test method
ISO 12278:1999 - Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads,
classifications: 900 MPa (at ambient temperature) / 235 degrees C, 1100 MPa (at ambient
temperature) / 235 degrees C, 1250 MPa (at ambient temperature) / 235 degrees C and 1550
MPa (at ambient temperature) / 235 degrees C - Dimensions
ISO 12280:1999 - Aerospace - Retainers, spring, sheet metal, for self-locking barrel nuts Dimensions
ISO 1151-2:1985 - Flight dynamics - Concepts, quantities and symbols - Part 2: Motions of the
aircraft and the atmosphere relative to the Earth
ISO 1151-1:1988 - Flight dynamics - Concepts, quantities and symbols - Part 1: Aircraft motion
relative to the air
ISO 1151-3:1989 - Flight dynamics - Concepts, quantities and symbols - Part 3: Derivatives of
forces, moments and their coefficients
ISO 6965:1982 - Aircraft - Self-propelled gantry for lifting air cargo containers and outsize
cargoes - Functional requirements
ISO 6966-1:2005 - Aircraft ground equipment - Basic requirements - Part 1: General design
requirements
ISO 6968:2005 - Aircraft ground equipment - Lower deck loader - Functional requirements
ISO 7718-1:2009 - Aircraft - Passenger doors interface requirements for connection of passenger
boarding bridge - Part 1: Main deck doors
ISO 7718-2:2009 - Aircraft - Passenger doors interface requirements for connection of passenger
boarding bridge - Part 2: Upper deck doors
ISO 9634:1994 - Aerospace - Fluid systems - Dimensions of plastic protective caps and plugs
ISO 9939:1994 - Aerospace - Pressure re-oiling connection (new type)
ISO 102:1990 - Aircraft - Gravity filling orifices
ISO 1465:1989 - Aircraft - Liquid oxygen replenishment couplings - Mating dimensions
ISO 1749:1973 - Aircraft - Elastomeric sealing rings - Packaging and identification.
ISO 7315:1988 - Aerospace - "P" clamps (loop clamps) for fluid systems - Envelope dimensions.
ISO 8479:1986 - Aerospace - "Q" clamps (centre-mounted clamps) for fluid systems
Dimensions.
ISO 6773:1994 - Aerospace - Fluid systems - Thermal shock testing of piping and fittings.
ISO 451:1976 - Aircraft -- Pressure re-oiling connection.
ISO 485:1973 - Aircraft water-methanol pressure connections.
ISO 1034:1973 - Aircraft - Ground air-conditioning connections.
ISO 3174:1994 - Aircraft - Connections for checking hydraulic systems by ground appliances Threaded type.
ISO 7258:1984 - Polytetrafluoroethylene (PTFE) tubing for aerospace applications - Methods for
the determination of the density and relative density.
High
temperature
convoluted
hose
assemblies
in
ISO 7661:1984 - Aerospace - Fluid systems - Clamp blocks for tube lines having axial alignment Design standard and qualification testing - Metric series.
ISO 8625-1:1993 - Aerospace - Fluid systems - Vocabulary - Part 1: General terms and
definitions related to pressure
ISO 8775:1988 - Aerospace - Gaseous oxygen replenishment connection for use in fluid systems
(new type) - Dimensions (Inch series)
ISO 9528:1994 - Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies,
classification 204 degrees C/21 000 kPa - Procurement specification
ISO 9938:1994 - Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204
degrees C/28 000 kPa - Procurement specification
ISO 12319:2006 - Aerospace - 'P' (loop style) clamps - Procurement specification
ISO 9679:2006 - Aerospace - Clamps for fluid systems - Test methods
ISO 8829-2:2006 - Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose
assemblies - Part 2: Non-metallic braid
ISO 23935:2006 - Aircraft - Environmental test procedures for airborne fluid system components Resistance to fire in designated fire zones
ISO 23933:2006 - Aerospace - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose
assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees
C/21 000 kPa (275 degrees F/3 046 psi) - Procurement specification
ISO 27996:2009 - Aerospace fluid systems - Elastomer seals - Storage and shelf life
ISO 8829-1:2009 - Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose
assemblies - Part 1: Metallic (stainless steel) braid
ISO 22089:2009 - Aerospace - Hydraulic power transfer units - General specifications
ISO 2563:2009 - Aircraft ducting and piping - Profile dimensions for flanges of V-band couplings
ISO 8153-1:2009 - Aerospace fluid systems and components - Vocabulary - Part 1: Hose
assemblies
ISO 13764:1996 - Space data and information transfer systems - Standard formatted data units Control authority procedures
ISO 14962:1997 - Space data and information transfer systems - ASCII encoded EnglishHide
details
ISO 22643:2003 - Space data and information transfer systems - Data entity dictionary
specification language (DEDSL) - XML/DTD Syntax
ISO 20652:2006 - Space data and information transfer systems - Producer-archive interface Methodology abstract standard
ISO 21459:2006 - Space data and information transfer systems - Proximity-1 space link protocol Coding and synchronization sublayer
ISO 26868:2009 - Space data and information transfer systems - Image data compression
ISO 22666:2007 - Space data and information transfer systems - AOS (advanced orbiting
systems) space data link protocol
ISO 21460:2007 - Space data and information transfer systems - Proximity-1 space link protocol Physical layer
ISO 22663:2007 - Space data and information transfer systems - Proximity-1 space link protocol Data link layer
ISO 18423:2013 - Space data and information transfer systems - Pseudo-Noise (PN) Ranging
Systems
ISO 17808:2014 - Space data and information transfer systems - Telemetry (TM) channel coding
profiles
ISO 17809:2014 - Space data and information transfer systems - Delta-differential one-way
ranging (Delta-DOR) operations
ISO 17810:2014 - Space data and information transfer systems - Data transmission and pseudorandom noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay
satellite
ISO 19389:2014 - Space data and information transfer systems - Conjunction data message
ISO 14621-2:2003 - Space systems - Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements
ISO 14621-1:2003 - Space systems - Electrical, electronic and electromechanical (EEE) parts Part 1: Parts management
ISO 15860:2006 - Space systems - Gas contamination - Measurement methods for field tests
ISO 15863:2003 - Space systems - Spacecraft-to-launch-vehicle interface control document
ISO 14620-1:2002 - Space systems - Safety requirements - Part 1: System safety.
ISO 17399:2003 - Space systems - Man-systems integration
ISO 14623:2003 - Space systems - Pressure vessels and pressurized structures - Design and
operation.
ISO 14952-1:2003 - Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary.
ISO 14952-2:2003 - Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness
levels.
ISO 14952-4:2003 - Space systems - Surface cleanliness of fluid systems - Part 4: Roughcleaning processes
ISO 14952-3:2003 - Space systems - Surface cleanliness of fluid systems - Part 3: Analytical
procedures for the determination of nonvolatile residues and particulate contamination.
ISO 14952-5:2003 - Space systems - Surface cleanliness of fluid systems - Part 5: Drying
processes.
ISO 14952-6:2003 - Space systems - Surface cleanliness of fluid systems - Part 6: Precisioncleaning processes.
ISO 23038:2006 - Space systems - Space solar cells - Electron and proton irradiation test
methods.
ISO 14619:2003 - Space systems - Space experiments - General requirements.
ISO 14624-5:2006 - Space systems - Safety and compatibility of materials - Part 5: Determination
of reactivity of system/component materials with aerospace propellants.
ISO 14624-6:2006 - Space systems - Safety and compatibility of materials - Part 6: Determination
of reactivity of processing materials with aerospace fluids.
ISO 14624-7:2006 - Space systems - Safety and compatibility of materials - Part 7: Determination
of permeability and penetration of materials to aerospace fluids.
ISO 15862:2009 - Space systems - Launch-vehicle-to-spacecraft flight environments telemetry
data processing.
ISO 24637:2009 - Space systems - Electromagnetic interference (EMI) test reporting
requirements.
ISO 22010:2007 - Space systems - Mass properties control.
ISO 26870:2009 - Space systems - Launch pad and integration site operational documents.
ISO 21648:2008 - Space systems - Flywheel module design and testing.
ISO 22009:2009 - Space systems - Space environment (natural and artificial) - Model of the
earth's magnetospheric magnetic field.
ISO/TS 12208:2011 - Space systems - Space environment (natural and artificial) - Observed
proton fluences over long duration at GEO and guideline for selection of confidence level in
statistical model of solar proton fluences.
ISO/TC 21 - Equipment for fire protection and fire fighting
ISO 7240-21:2005 - Fire detection and alarm systems - Part 21: Routing equipment.
ISO 7240-27:2009 - Fire detection and alarm systems - Part 27: Point-type fire detectors using a
scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbonmonoxide sensor and a heat sensor.
ISO 7240-17:2009 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators.
ISO 7240-15:2014 - Fire detection and alarm systems - Part 15: Point-type fire detectors using
smoke and heat sensors.
ISO 6182-11:2003 - Fire protection - Automatic sprinkler systems - Part 11: Requirements and
test methods for pipe hangers.
ISO/TC 22 - Road vehicles
ISO 6626:1989 - Internal combustion engines - Piston rings - Coil-spring-loaded oil control rings.
ISO 3895:1986 - Road vehicles - Screened and waterproof spark-plug and its connection - Type
2.
ISO 3896:1986 - Road vehicles - Screened and waterproof spark-plug and its connection - Type
3.
ISO 10455:1992 - Road vehicles - Dry ignition coils using rotating high-voltage distributor.
ISO 6518-2:1995 - Road vehicles - Ignition systems - Part 2: Electrical performance and function
test methods.
ISO 13476:1997 - Road vehicles - Ignition coils - Electrical characteristics and test methods.
ISO 3553-2:1997 - Road vehicles - High-tension connectors for ignition coils and distributors Part 2: Plug-types
ISO 3808:2002 - Road vehicles - Unscreened high-voltage ignition cables - General
specifications, test methods and requirements.
ISO 6311:1980 - Road vehicles - Brake linings - Internal shear strength of lining material - Test
procedure.
ISO 6313:1980 - Road vehicles - Brake linings - Effects of heat on dimensions and form of disc
brake pads - Test procedure.
ISO 6314:1980 - Road vehicles - Brake linings - Resistance to water, saline solution, oil and
brake fluid - Test procedure.
ISO 6315:1980 - Road vehicles - Brake linings - Seizure to ferrous mating surface due to
corrosion - Test procedure.
ISO 3996:1995 - Road vehicles - Brake hose assemblies for hydraulic braking systems used with
non-petroleum-base brake fluid.
ISO 8092-4:1997 - Road vehicles - Connections for on-board electrical wiring harnesses - Part 4:
Pins for single- and multi-pole connections - Dimensions and specific requirements.
ISO 7588-2:1998 - Road vehicles - Electrical/electronic switching devices - Part 2: Electronic
devices.
ISO 11452-3:2001 - Road vehicles - Component test methods for electrical disturbances from
narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM)
cell.
ISO 7588-3:1998 - Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays.
ISO 7588-1:1998 - Road vehicles - Electrical/electronic switching devices - Part 1: Relays and
flashers
ISO 4091:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - Definitions, tests and requirements.
ISO 7638-1:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal
supply voltageHide details
ISO 7638-2:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal
supply voltage.
ISO 3732:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply
voltage.
ISO 1724:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage.
ISO 1185:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage.
ISO 3731:2003 - Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply
voltage.
ISO 17356-2:2005 - Road vehicles - Open interface for embedded automotive applications - Part
2: OSEK/VDX specifications for binding OS, COM and NM.
ISO 17356-1:2005 - Road vehicles - Open interface for embedded automotive applications - Part
1: General structure and terms, definitions and abbreviated terms.
ISO 11898-2:2003 - Road vehicles - Controller area network (CAN) - Part 2: High-speed medium
access unit.
ISO 11992-1:2003 - Road vehicles - Interchange of digital information on electrical connections
between towing and towed vehicles - Part 1: Physical and data-link layers.
ISO 11992-3:2003 - Road vehicles - Interchange of digital information on electrical connections
between towing and towed vehicles - Part 3: Application layer for equipment other than brakes
and running gear.
ISO 21848:2005 - Road vehicles - Electrical and electronic equipment for a supply voltage of 42
V - Electrical loads.
ISO 11898-3:2006 - Road vehicles - Controller area network (CAN) - Part 3: Low-speed, faulttolerant, medium-dependent interface.
ISO 4141-1:2005 - Road vehicles - Multi-core connecting cables - Part 1: Test methods and
requirements for basic performance sheathed cables.
ISO 11452-7:2003 - Road vehicles - Component test methods for electrical disturbances from
narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power
injection.
ISO 16750-1:2006 - Road vehicles - Environmental conditions and testing for electrical and
electronic equipment - Part 1: General.
ISO 4141-2:2006 - Road vehicles - Multi-core connecting cables - Part 2: Test methods and
requirements for high performance sheathed cables.
ISO 4141-3:2006 - Road vehicles - Multi-core connecting cables - Part 3: Construction,
dimensions and marking of unscreened sheathed low-voltage cables.
ISO 8092-2:2005 - Road vehicles - Connections for on-board electrical wiring harnesses - Part 2:
Definitions, test methods and general performance requirements.
ISO 17356-6:2006 - Road vehicles - Open interface for embedded automotive applications - Part
6: OSEK/VDX Implementation Language (OIL).
ISO 17356-3:2005 - Road vehicles - Open interface for embedded automotive applications - Part
3: OSEK/VDX Operating System (OS).
ISO 17356-4:2005 - Road vehicles - Open interface for embedded automotive applications - Part
4: OSEK/VDX Communication (COM).
ISO 17356-5:2006 - Road vehicles - Open interface for embedded automotive applications - Part
5: OSEK/VDX Network Management (NM).
ISO 22902-1:2006 - Road vehicles - Automotive multimedia interface - Part 1: General technical
overview.
ISO 22902-4:2006 - Road vehicles - Automotive multimedia interface - Part 4: Network protocol
requirements for vehicle interface access.
ISO 22902-3:2006 - Road vehicles - Automotive multimedia interface - Part 3: System
requirements.
ISO 22902-6:2006 - Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface
requirements.
ISO 22902-5:2006 - Road vehicles - Automotive multimedia interface - Part 5: Common message
set.
ISO 22902-2:2006 - Road vehicles - Automotive multimedia interface - Part 2: Use cases.
ISO 22902-7:2006 - Road vehicles - Automotive multimedia interface - Part 7: Physical
specification.
ISO 19072-1:2014 - Road vehicles - Connection interface for pyrotechnic devices, two-way and
three-way connections - Part 1: Pocket interface definition.
ISO 7237:1993 - Caravans - Masses and dimensions - Vocabulary.
ISO 2534:1998 - Road vehicles - Engine test code - Gross power.
ISO 10054:1998 - Internal combustion compression-ignition engines - Measurement apparatus
for smoke from engines operating under steady-state conditions - Filter-type smokemeter.
ISO 13556:1998 - Road vehicles - Localization of exhaust system leaks and equipment
specifications.
ISO 16183:2002 - Heavy duty engines - Measurement of gaseous emissions from raw exhaust
gas and of particulate emissions using partial flow dilution systems under transient test
conditions.
ISO 22902-6:2006 - Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface
requirements.
ISO 22902-5:2006 - Road vehicles - Automotive multimedia interface - Part 5: Common message
set.
ISO 22902-2:2006 - Road vehicles - Automotive multimedia interface - Part 2: Use cases.
ISO 22902-7:2006 - Road vehicles - Automotive multimedia interface - Part 7: Physical
specification.
ISO 19072-1:2014 - Road vehicles - Connection interface for pyrotechnic devices, two-way and
three-way connections - Part 1: Pocket interface definition.
ISO 7237:1993 - Caravans - Masses and dimensions - Vocabulary.
ISO 2534:1998 - Road vehicles - Engine test code - Gross power.
ISO 10054:1998 - Internal combustion compression-ignition engines - Measurement apparatus
for smoke from engines operating under steady-state conditions - Filter-type smokemeter.
ISO 13556:1998 - Road vehicles - Localization of exhaust system leaks and equipment
specifications.
ISO 16183:2002 - Heavy duty engines - Measurement of gaseous emissions from raw exhaust
gas and of particulate emissions using partial flow dilution systems under transient test
conditions.
ISO 7654:1998 - Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting
dimensions.
ISO 19438:2003 - Diesel fuel and petrol filters for internal combustion engines - Filtration
efficiency using particle counting and contaminant retention capacity.
ISO 4148:2004 - Road vehicles - Special warning lamps - Dimensions.
ISO 15037-2:2002 - Road vehicles - Vehicle dynamics test methods - Part 2: General conditions
for heavy vehicles and buses.
ISO 16552:2014 - Heavy commercial vehicles and buses - Stopping distance in straight-line
braking with ABS - Open loop and closed loop test methods.
ISO 8853:1989 - Safety harnesses for competition drivers - Requirements and test methods.
ISO 13218:1998 - Road vehicles - Child restraint systems - Report form for accidents involving
child passengers.
ISO 17287:2003 - Road vehicles - Ergonomic aspects of transport information and control
systems - Procedure for assessing suitability for use while driving.
ISO 2575:2010/Amd 3:2014 - Road vehicles -- Symbols for controls, indicators and tell-tales.
ISO 7646:1986 - Commercial vehicles and buses - Gearbox flanges - Type A.
ISO 12667:1993 - Commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T.
ISO 337:1981 - Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and
mounting/interchangeability dimensions.
ISO 7650:1987 - Commercial vehicles and buses - Mounting dimensions for starter motors of
types 1, 2, 3 and 4.
ISO/TS 20825:2003 - Road vehicles - Drawbar couplings, drawbar eyes, fifth wheel kingpins,
hook couplings and toroidal eyes - Wear limits for in-use mechanical couplings.
ISO 6469-1:2009 - Electrically propelled road vehicles - Safety specifications - Part 1: On-board
rechargeable energy storage system (RESS).
ISO 6469-2:2009 - Electrically propelled road vehicles - Safety specifications - Part 2: Vehicle
operational safety means and protection against failures.
ISO 13232-1:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general
considerations.
ISO 13232-2:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to
accident data.
ISO 13232-4:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation
and measurement procedures.
ISO 13232-3:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact
dummy.
ISO 13232-6:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures.
ISO 13232-7:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing
computer simulations of motorcycle impact tests.
ISO 13232-8:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 8: Documentation and reports.
ISO 13232-5:2005 - Motorcycles - Test and analysis procedures for research evaluation of rider
crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis.
ISO 12619-1:2014 - Road vehicles - Compressed gaseous hydrogen (CGH2) and
hydrogen/natural gas blend fuel system components - Part 1: General requirements and
definitions.
ISO 12619-2:2014 - Road vehicles - Compressed gaseous hydrogen (CGH2) and
hydrogen/natural gas blend fuel system components - Part 2: Performance and general test
methods.
ISO 12614-12:2014 - Road vehicles - Liquefied natural gas (LNG) fuel system components - Part
12: Rigid fuel line in copper and its alloys.
ISO 12614-18:2014 - Road vehicles - Liquefied natural gas (LNG) fuel system components - Part
18: Gas temperature sensor.
ISO 12614-7:2014 - Road vehicles - Liquefied natural gas (LNG) fuel system components - Part
7: Pressure relief valve.
ISO/TC 23 - Tractors and machinery for agriculture and forestry
ISO 14982:1998 - Agricultural and forestry machinery - Electromagnetic compatibility - Test
methods and acceptance criteria.
ISO 730:2009 - Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N,
1, 2N, 2, 3N, 3, 4N and 4.
ISO 2332:2009 - Agricultural tractors and machinery - Connection of implements via three-point
linkage - Clearance zone around implement.
ISO 11001-3:2009 - Agricultural wheeled tractors and implements - Three-point hitch couplers Part 3: Link coupler.
ISO 4254-6:2009 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer
distributors.
ISO 22763:2006 - Equipment for crop protection - Sprayers - Demonstration track for field crop
sprayers.
ISO 28139:2009 - Agricultural and forestry machinery - Knapsack combustion-engine-driven
mistblowers - Safety requirements.
ISO 22369-2:2010 - Crop protection equipment - Drift classification of spraying equipment - Part
2: Classification of field crop sprayers by field measurements.
ISO/TS 11356:2011 - Crop protection equipment - Traceability - Spray parameter recording.
ISO 11520-1:1997 - Agricultural grain driers - Determination of drying performance - Part 1:
General.
ISO 10517:2009 - Powered hand-held hedge trimmers - Safety.
ISO 8083:2006 - Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory
tests and performance requirements.
ISO 8224-1:2003 - Traveller irrigation machines - Part 1: Operational characteristics and
laboratory and field test methods.
ISO 11783-6:2014 - Tractors and machinery for agriculture and forestry - Serial control and
communications data network - Part 6: Virtual terminal.
ISO/TC 24 - Particle characterization including sieving
ISO 13320:2009 - Particle size analysis - Laser diffraction methods.
ISO 13099-3:2014 - Colloidal systems - Methods for zeta potential determination - Part 3:
Acoustic methods.
ISO/TC 25 - Cast irons and pig irons
ISO 5922:2005 - Malleable cast iron.
ISO/TC 26 - Copper and copper alloys
ISO 4740:1985 - Copper and copper alloys - Determination of zinc content - Flame atomic
absorption spectrometric method.
ISO 4741:1984 - Copper and copper alloys - Determination of phosphorus content Molybdovanadate spectrometric method.
ISO 1553:1976 - Unalloyed copper containing not less than 99,90 % of copper - Determination of
copper content - Electrolytic method
ISO 3110:1975 - Copper alloys - Determination of aluminium as alloying element - Volumetric
method.
ISO 5956:1984 - Copper and copper alloys - Determination of antimony content - Rhodamine B
spectrometric method.
ISO 5960:1984 - Copper alloys - Determination of cadmium content - Flame atomic absorption
spectrometric method.
ISO 2543:1973 - Copper and copper alloys - Determination of manganese - Spectrophotometric
method.
ISO 3111:1975 - Copper alloys - Determination of tin as alloying element - Volumetric method.
ISO 4742:1984 - Copper alloys - Determination of nickel content - Gravimetric method.
ISO 4744:1984 - Copper and copper alloys - Determination of chromium content - Flame atomic
absorption spectrometric method.
ISO 4748:1984 - Copper alloys - Determination of iron content - Na2EDTA titrimetric method.
ISO 4749:1984 - Copper alloys - Determination of lead content - Flame atomic absorption
spectrometric method.
ISO 5959:1984 - Copper and copper alloys - Determination of bismuth content Diethyldithiocarbamate spectrometric method.
ISO/TC 27 - Solid mineral fuels
ISO 8858-2:2004 - Hard coal - Froth flotation testing - Part 2: Sequential evaluation.
ISO 8858-3:2004 - Hard coal - Froth flotation testing -- Part 3: Release evaluation.
ISO 20905:2004 - Coal preparation - Determination of dust/moisture relationship for coal.
ISO 622:1981 - Solid mineral fuels - Determination of phorphorus content - Reduced
molybdophosphate photometric method.
ISO 157:1996 - Coal - Determination of forms of sulfur.
ISO 609:1996 - Solid mineral fuels - Determination of carbon and hydrogen - High temperature
combustion method.
ISO 625:1996 - Solid mineral fuels - Determination of carbon and hydrogen - Liebig method.
ISO 647:1974 - Brown coals and lignites - Determination of the yields of tar, water, gas and coke
residue by low temperature distillation.
ISO 1018:1975 - Hard coal - Determination of moisture-holding capacity.
ISO 15237:2003 - Solid mineral fuels - Determination of total mercury content of coal.
ISO 15238:2003 - Solid mineral fuels - Determination of total cadmium content of coal.
ISO 11726:2004 - Solid mineral fuels - Guidelines for the validation of alternative methods of
analysis.
ISO 11724:2004 - Solid mineral fuels - Determination of total fluorine in coal, coke and fly ash.
ISO 11723:2004 - Solid mineral fuels - Determination of arsenic and selenium - Eschka's mixture
and hydride generation method.
ISO 10329:2009 - Coal - Determination of plastic properties - Constant-torque Gieseler
plastometer method.
ISO 7404-2:2009 - Methods for the petrographic analysis of coals - Part 2: Methods of preparing
coal samples.
ISO 7404-3:2009 - Methods for the petrographic analysis of coals - Part 3: Method of determining
maceral group composition.
ISO 7404-5:2009 - Methods for the petrographic analysis of coals - Part 5: Method of determining
microscopically the reflectance of vitrinite.
ISO/TC 28 - Petroleum products and lubricants
ISO 5661:1983 - Petroleum products - Hydrocarbon liquids - Determination of refractive index.
ISO 6244:1982 - Petroleum waxes and petrolatums - Determination of drop melting point.
ISO 8819:1993 - Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate
method.
ISO 3007:1999 - Petroleum products and crude petroleum - Determination of vapour pressure Reid method.
ISO 3014:1993 - Petroleum products - Determination of the smoke point of kerosine.
ISO 6247:1998 - Petroleum products - Determination of foaming characteristics of lubricating oils.
ISO 6299:1998 - Petroleum products - Determination of dropping point of lubricating greases
(wide temperature range).
ISO 7941:1988 - Commercial propane and butane - Analysis by gas chromatography.
ISO 4262:1993 - Petroleum products - Determination of carbon residue - Ramsbottom method.
ISO 3830:1993 - Petroleum products - Determination of lead content of gasoline - Iodine
monochloride method.
ISO 1998-1:1998 - Petroleum industry - Terminology - Part 1: Raw materials and products.
ISO 1998-2:1998 - Petroleum industry - Terminology - Part 2: Properties and tests.
ISO 1998-3:1998 - Petroleum industry - Terminology - Part 3: Exploration and production.
ISO 1998-4:1998 - Petroleum industry - Terminology - Part 4: Refining.
ISO 1998-5:1998 - Petroleum industry - Terminology - Part 5: Transport, storage, distribution.
ISO 1998-7:1998 - Petroleum industry - Terminology - Part 7: Miscellaneous terms.
ISO 15029-1:1999 - Petroleum and related products - Determination of spray ignition
characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle
method.
ISO 2977:1997 - Petroleum products and hydrocarbon solvents - Determination of aniline point
and mixed aniline point.
ISO 4266-2:2002 - Petroleum and liquid petroleum products - Measurement of level and
temperature in storage tanks by automatic methods - Part 2: Measurement of level in marine
vessels.
ISO 4266-5:2002 - Petroleum and liquid petroleum products - Measurement of level and
temperature in storage tanks by automatic methods - Part 5: Measurement of temperature in
marine vessels.
ISO 4266-6:2002 - Petroleum and liquid petroleum products - Measurement of level and
temperature in storage tanks by automatic methods - Part 6: Measurement of temperature in
pressurized storage tanks (non-refrigerated).
ISO 7507-1:2003 - Petroleum and liquid petroleum products - Calibration of vertical cylindrical
tanks - Part 1: Strapping method.
ISO 6743-3:2003 - Lubricants, industrial oils and related products (class L) - Classification - Part
3: Family D (Compressors).
ISO 10050:2005 - Lubricants, industrial oils and related products (class L) - Family T (Turbines) Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD).
ISO 11158:2009 - Lubricants, industrial oils and related products (class L) - Family H (hydraulic
systems) - Specifications for categories HH, HL, HM, HV and HG.
ISO/TS 11365:2011 - Petroleum and related products - Guidance for the maintenance and use of
triaryl phosphate ester turbine-control fluids.
ISO/TS 11366:2011 - Petroleum and related products - Guidance for in-servicing of lubricating
oils for steam, gas and combined-cycle turbines.
ISO/TC 29 - Small tools
ISO/TS 13399-201:2014 - Cutting tool data representation and exchange - Part 201: Creation and
exchange of 3D models - Regular inserts.
ISO/TS 13399-80:2014 - Cutting tool data representation and exchange - Part 80: Creation and
exchange of 3D models - Overview and principles.
ISO 10889-8:1997 - Tool holders with cylindrical shank - Part 8: Type Z, accessories.
ISO 15488:2003 - Collets with 8 degree setting angle for tool shanks - Collets, nuts and fitting
dimensions.
ISO 10889-1:2004 - Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore Technical delivery conditions.
ISO 10889-2:2004 - Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders
of special designs.
ISO 10889-3:2004 - Tool holders with cylindrical shank - Part 3: Type B with rectangular radial
seat.
ISO 10889-4:2004 - Tool holders with cylindrical shank - Part 4: Type C with rectangular axial
seat.
ISO 10889-6:2004 - Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat.
ISO 10889-7:2004 - Tool holders with cylindrical shank - Part 7: Type F with taper seat.
ISO 10643:2009 - Dimensions of accessories for cutter arbors with parallel key and tenon drive.
ISO 2250:2009 - Finishing reamers for Morse and metric tapers, with cylindrical shanks and
Morse taper shanks.
ISO 494:2009 - Cylindrical shank twist drills - Long series.
ISO 6344-1:1998 - Coated abrasives - Grain size analysis - Part 1: Grain size distribution test.
ISO 6344-2:1998 - Coated abrasives - Grain size analysis - Part 2: Determination of grain size
distribution of macrogrits P12 to P220.
ISO 15636:2003 - Back-up pads for vulcanized fibre discs.
ISO 2976:2005 - Coated abrasives - Abrasive belts - Selection of width/length combinations.
ISO 603-17:2014 - Bonded abrasive products - Dimensions - Part 17: Spindle mounted wheels
(ISO type 52).
ISO 3467:1975 - Machine taper pin reamers with Morse taper shanks.
ISO 3466:1975 - Machine taper pin reamers with parallel shanks.
ISO 514:2014 - Turning tools with carbide tips - Internal tools.
ISO 243:2014 - Turning tools with carbide tips - External tools.
ISO 242:2014 - Carbide tips for brazing on turning tools.
ISO 9361-1:2014 - Indexable inserts for cutting tools - Ceramic inserts with rounded corners Part 1: Dimensions of inserts without fixing hole.
ISO 1174-2:1996 - Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares
for power socket tools.
ISO 9242:1988 - Pliers and nippers - Construction worker's pincers - Dimensions and test values.
ISO 9243:1988 - Pliers and nippers - Carpenter's pincers - Dimensions and test values.
ISO 1085:1999 - Assembly tools for screws and nuts - Double-ended wrenches - Size pairing.
ISO 691:2005 - Assembly tools for screws and nuts - Wrench and socket openings - Tolerances
for general use.
ISO 1703:2005 - Assembly tools for screws and nuts - Designation and nomenclature.
ISO 3318:2009 - Assembly tools for screws and nuts - Double-headed open-ended wrenches,
double-headed box wrenches and combination wrenches - Maximum widths of heads.
ISO 4229:2009 - Assembly tools for screws and nuts - Single-head engineer's wrenches for lower
torque applications - Maximum outside dimensions of heads and test torques.
ISO/TC 30 - Measurement of fluid flow in closed conduits
ISO 4006:1991 - Measurement of fluid flow in closed conduits - Vocabulary and symbols.
ISO 4185:1980 - Measurement of liquid flow in closed conduits - Weighing method.
ISO 8316:1987 - Measurement of liquid flow in closed conduits - Method by collection of the liquid
in a volumetric tank.
ISO 9368-1:1990 - Measurement of liquid flow in closed conduits by the weighing method Procedures for checking installations - Part 1: Static weighing systems.
ISO 11631:1998 - Measurement of fluid flow - Methods of specifying flowmeter performance.
ISO 5168:2005 - Measurement of fluid flow - Procedures for the evaluation of uncertainties.
ISO 9300:2005 - Measurement of gas flow by means of critical flow Venturi nozzles.
ISO/TC 31 - Tyres, rims and valves
ISO 18164:2005 - Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling
resistance.
ISO 13442:2004 - Tyres and rims for construction machines.
ISO/TC 33 - Refractories
ISO 5019-5:1984 - Refractory bricks - Dimensions - Part 5: Skewbacks.
ISO 8890:1988 - Dense shaped refractory products - Determination of resistance to sulfuric acid.
ISO 9205:1988 - Refractory bricks for use in rotary kilns -- Hot-face identification marking.
ISO 5018:1983 - Refractory materials - Determination of true density.
ISO 21415-1:2006 - Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten
by a manual method.
ISO 21415-3:2006 - Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten
from wet gluten by an oven drying method.
ISO 21415-4:2006 - Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten
from wet gluten by a rapid drying method.
ISO 24557:2009 - Pulses - Determination of moisture content - Air-oven method.
ISO 7971-1:2009 - Cereals - Determination of bulk density, called mass per hectolitre - Part 1:
Reference method.
ISO 7971-2:2009 - Cereals - Determination of bulk density, called mass per hectolitre - Part 2:
Method of traceability for measuring instruments through reference to the international standard
instrument.
ISO 7971-3:2009 - Cereals - Determination of bulk density, called mass per hectolitre - Part 3:
Routine method.
ISO 712:2009 - Cereals and cereal products - Determination of moisture content - Reference
method.
ISO 3093:2009 - Wheat, rye and their flours, durum wheat and durum wheat semolina Determination of the falling number according to Hagberg-Perten.
ISO 7586:1985 - Butter - Determination of water dispersion value.
ISO 12078:2006 (IDF 159: 2006) - Anhydrous milk fat - Determination of sterol composition by
gas liquid chromatography (Reference method).
ISO 18252:2006 (IDF 200: 2006) - Anhydrous milk fat - Determination of sterol composition by
gas liquid chromatography (Routine method).
ISO 3976:2006 (IDF 74: 2006) - Milk fat - Determination of peroxide value.
ISO 23065:2009 (IDF 211: 2009) - Milk fat from enriched dairy products - Determination of
omega-3 and omega-6 fatty acid content by gas-liquid chromatography.
ISO 9874:2006 (IDF 42: 2006) - Milk - Determination of total phosphorus content - Method using
molecular absorption spectrometry.
ISO/TS 26844:2006 (IDF/RM 215: 2006) - Milk and milk products - Determination of antimicrobial
residues - Tube diffusion test.
ISO/TS 6733:2006 (IDF/RM 133: 2006) - Milk and milk products - Determination of lead content Graphite furnace atomic absorption spectrometric method.
ISO 7543-1:1994 - Chillies and chilli oleoresins - Determination of total capsaicinoid content - Part
1: Spectrometric method.
ISO 7926:1991 - Dehydrated tarragon (Artemisia dracunculus Linnaeus) - Specification.
ISO 7928-1:1991 - Savory - Specification - Part 1: Winter savory (Satureja montana Linnaeus).
ISO 7928-2:1991 - Savory - Specification - Part 2: Summer savory (Satureja hortensis Linnaeus).
ISO 959-1:1998 - Pepper (Piper nigrum L.), whole or ground - Specification - Part 1: Black
pepper.
ISO 959-2:1998 - Pepper (Piper nigrum L.), whole or ground - Specification - Part 2: White
pepper.
ISO 3493:2014 - Vanilla - Vocabulary.
ISO 13722:1996 - Meat and meat products - Enumeration of Brochothrix thermosphacta - Colonycount technique.
ISO 15213:2003 - Microbiology of food and animal feeding stuffs - Horizontal method for the
enumeration of sulfite-reducing bacteria growing under anaerobic conditions.
ISO 6888-3:2003 - Microbiology of food and animal feeding stuffs - Horizontal method for the
enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers.
ISO 7251:2005 - Microbiology of food and animal feeding stuffs - Horizontal method for the
detection and enumeration of presumptive Escherichia coli - Most probable number technique.
ISO 21567:2004 - Microbiology of food and animal feeding stuffs - Horizontal method for the
detection of Shigella spp.
ISO 22174:2005 - Microbiology of food and animal feeding stuffs - Polymerase chain reaction
(PCR) for the detection of food-borne pathogens - General requirements and definitions.
ISO 7937:2004 - Microbiology of food and animal feeding stuffs - Horizontal method for the
enumeration of Clostridium perfringens - Colony-count technique.
ISO/TR 6579-3:2014 - Microbiology of the food chain - Horizontal method for the detection,
enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp.
ISO 6491:1998 - Animal feeding stuffs - Determination of phosphorus content - Spectrometric
method.
ISO 14718:1998 - Animal feeding stuffs - Determination of aflatoxin B1 content of mixed feeding
stuffs - Method using high-performance liquid chromatography.
ISO 13903:2005 - Animal feeding stuffs - Determination of amino acids content.
ISO 5983-1:2005 - Animal feeding stuffs - Determination of nitrogen content and calculation of
crude protein content - Part 1: Kjeldahl method.
ISO 14183:2005 - Animal feeding stuffs - Determination of monensin, narasin and salinomycin
contents - Liquid chromatographic method using post-column derivatization.
ISO 30024:2009 - Animal feeding stuffs - Determination of phytase activity.
ISO 662:1998 - Animal and vegetable fats and oils - Determination of moisture and volatile
matter content.
ISO 15788-1:1999 - Animal and vegetable fats and oils - Determination of stigmastadienes in
vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method).
ISO 15753:2006 - Animal and vegetable fats and oils - Determination of polycyclic aromatic
hydrocarbons.
ISO 9936:2006 - Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol
contents by high-performance liquid chromatography.
ISO 6885:2006 - Animal and vegetable fats and oils - Determination of anisidine value.
ISO 23275-1:2006 - Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter
and plain chocolate - Part 1: Determination of the presence of cocoa butter equivalents.
ISO 23275-2:2006 - Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter
and plain chocolate - Part 2: Quantification of cocoa butter equivalents.
ISO 6886:2006 - Animal and vegetable fats and oils - Determination of oxidative stability
(accelerated oxidation test).
ISO 28198:2009 - Vegetable fats and oils - Determination of toluene insoluble matter.
ISO 11053:2009 - Vegetable fats and oils - Determination of cocoa butter equivalents in milk
chocolate.
ISO 12228-1:2014 - Determination of individual and total sterols contents - Gas chromatographic
method - Part 1: Animal and vegetable fats and oils.
ISO 5555:2001/Amd 1:2014 - Flexitanks.
ISO 21569:2005 - Foodstuffs - Methods of analysis for the detection of genetically modified
organisms and derived products - Qualitative nucleic acid based methods.
ISO 21570:2005 - Foodstuffs - Methods of analysis for the detection of genetically modified
organisms and derived products - Quantitative nucleic acid based methods.
ISO 21571:2005 - Foodstuffs - Methods of analysis for the detection of genetically modified
organisms and derived products - Nucleic acid extraction.
ISO 24276:2006 - Foodstuffs - Methods of analysis for the detection of genetically modified
organisms and derived products - General requirements and definitions.
ISO 22000:2005 - Food safety management systems - Requirements for any organization in the
food chain.
ISO/TC 35 - Paints and varnishes
ISO 2811-1:2011 - Paints and varnishes - Determination of density - Part 1: Pyknometer method.
ISO 15110:2013 - Paints and varnishes - Artificial weathering including acidic deposition.
ISO 3233-2:2014 - Paints and varnishes - Determination of the percentage volume of non-volatile
matter - Part 2: Method using the determination of non-volatile-matter content in accordance with
ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle.
ISO 17463:2014 - Paints and varnishes - Guidelines for the determination of anticorrosive
properties of organic coatings by accelerated cyclic electrochemical technique.
ISO 11126-9:1999 - Preparation of steel substrates before application of paints and related
products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite.
ISO 8501-3:2006 - Preparation of steel substrates before application of paints and related
products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges
and other areas with surface imperfections.
ISO/TC 36 - Cinematography
ISO 23:1993 - Cinematography - Camera usage of 35 mm motion-picture film - Specifications.
ISO/TC 37 - Terminology and other language and content resources
ISO 704:2009 - Terminology work - Principles and methods.
ISO 860:2007 - Terminology work - Harmonization of concepts and terms.
ISO 23185:2009 - Assessment and benchmarking of terminological resources - General
concepts, principles and requirements
ISO/TC 38 - Textiles
ISO 6941:2003 - Textile fabrics - Burning behaviour - Measurement of flame spread properties of
vertically oriented specimens.
ISO 105-X02:1993 - Textiles - Tests for colour fastness - Part X02: Colour fastness to
carbonizing: Sulfuric acid.
ISO 105-X09:1993 - Textiles - Tests for colour fastness - Part X09: Colour fastness to
formaldehyde.
ISO 105-X10:1993 - Textiles - Tests for colour fastness - Part X10: Assessment of migration of
textile colours into polyvinyl chloride coatings.
ISO 105-N04:1993 - Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching:
Sodium chlorite (severe).
ISO 105-S02:1993 - Textiles - Tests for colour fastness - Part S02: Colour fastness to
vulcanization: Sulfur monochloride.
ISO 105-S03:1993 - Textiles - Tests for colour fastness - Part S03: Colour fastness to
vulcanization: Open steam.
ISO 105-A02:1993 - Textiles - Tests for colour fastness - Part A02: Grey scale for assessing
change in colour.
ISO 105-N02:1993 - Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching:
Peroxide.
ISO 105-Z06:1998 - Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment
migration.
ISO 105-G03:1993 - Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in
the atmosphere.
ISO 105-Z11:1998 - Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of
colorant dispersions.
ISO 105-B06:1998 - Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to
artificial light at high temperatures: Xenon arc fading lamp test.
ISO 105-C10:2006 - Textiles - Tests for colour fastness - Part C10: Colour fastness to washing
with soap or soap and soda.
ISO 105-J03:2009 - Textiles - Tests for colour fastness - Part J03: Calculation of colour
differences.
ISO 23232:2009 - Textiles - Aqueous liquid repellency - Water/alcohol solution resistance test.
ISO 9867:2009 - Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method.
ISO 8388:1998 - Knitted fabrics - Types - Vocabulary.
ISO 8499:2003 - Knitted fabrics - Description of defects - Vocabulary.
ISO 9848:2003 - Photography - Source document microfilms - Determination of ISO speed and
ISO average gradient.
ISO 518:2006 - Photography - Camera accessory shoes, with and without electrical contacts, for
photoflash lamps and electronic photoflash units - Specification.
ISO 12232:2006 - Photography - Digital still cameras - Determination of exposure index, ISO
speed ratings, standard output sensitivity, and recommended exposure index.
ISO 20462-1:2005 - Photography - Psychophysical experimental methods for estimating image
quality - Part 1: Overview of psychophysical elements.
ISO 20462-2:2005 - Photography - Psychophysical experimental methods for estimating image
quality - Part 2: Triplet comparison method.
ISO 3664:2009 - Graphic technology and photography - Viewing conditions.
ISO 14524:2009 - Photography - Electronic still-picture cameras - Methods for measuring optoelectronic conversion functions (OECFs).
ISO 10505:2009 - Photography - Root mean square granularity of photographic films - Method of
measurement.
ISO 18932:2009 - Imaging materials - Adhesive mounting systems - Specifications.
ISO 5-1:2009 - Photography and graphic technology - Density measurements - Part 1: Geometry
and functional notation.
ISO 5-2:2009 - Photography and graphic technology - Density measurements - Part 2: Geometric
conditions for transmittance density.
ISO 5-4:2009 - Photography and graphic technology - Density measurements - Part 4: Geometric
conditions for reflection density.
ISO 5-3:2009 -Photography and graphic technology - Density measurements - Part 3: Spectral
conditions.
ISO/TC 43 - Acoustics
ISO 389-2:1994 - Acoustics - Reference zero for the calibration of audiometric equipment - Part
2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones.
ISO 16832:2006 - Acoustics - Loudness scaling by means of categories.
ISO 389-9:2009 - Acoustics - Reference zero for the calibration of audiometric equipment - Part
9: Preferred test conditions for the determination of reference hearing threshold levels.
ISO 389-5:2006 - Acoustics - Reference zero for the calibration of audiometric equipment - Part
5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8
kHz to 16 kHz.
ISO 8253-2:2009 - Acoustics - Audiometric test methods - Part 2: Sound field audiometry with
pure-tone and narrow-band test signals.
ISO 11094:1991 - Acoustics - Test code for the measurement of airborne noise emitted by power
lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and
garden tractors with mowing attachments.
ISO 17201-4:2006 - Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile
sound.
ISO 20906:2009 - Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports.
ISO 13474:2009 - Acoustics - Framework for calculating a distribution of sound exposure levels
for impulsive sound events for the purposes of environmental noise assessment.
ISO 13473-5:2009 - Characterization of pavement texture by use of surface profiles - Part 5:
Determination of megatexture.
ISO 9612:2009 - Acoustics - Determination of occupational noise exposure - Engineering method.
ISO 362-2:2009 - Measurement of noise emitted by accelerating road vehicles - Engineering
method - Part 2: L category.
ISO 4043:1998 - Mobile booths for simultaneous interpretation - General characteristics and
equipment.
ISO 2603:1998 - Booths for simultaneous interpretation - General characteristics and equipment.
ISO 10534-2:1998 - Acoustics - Determination of sound absorption coefficient and impedance in
impedance tubes - Part 2: Transfer-function method.
ISO 10848-2:2006 - Acoustics - Laboratory measurement of the flanking transmission of airborne
and impact sound between adjoining rooms - Part 2: Application to light elements when the
junction has a small influence.
ISO 10848-3:2006 - Acoustics - Laboratory measurement of the flanking transmission of airborne
and impact sound between adjoining rooms - Part 3: Application to light elements when the
junction has a substantial influence.
ISO 10848-1:2006 - Acoustics - Laboratory measurement of the flanking transmission of airborne
and impact sound between adjoining rooms - Part 1: Frame document.
ISO 18233:2006 - Acoustics - Application of new measurement methods in building and room
acoustics.
ISO 17657-2:2005 - Resistance welding - Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil.
ISO 17657-4:2005 - Resistance welding - Welding current measurement for resistance welding Part 4: Calibration system.
ISO 17657-5:2005 - Resistance welding - Welding current measurement for resistance welding Part 5: Verification of welding current measuring system.
ISO 5821:2009 - Resistance welding - Spot welding electrode caps.
ISO 15614-12:2014 - Specification and qualification of welding procedures for metallic materials Welding procedure test - Part 12: Spot, seam and projection welding.
ISO 13469:2014 - Mechanical joining - Form-fit blind rivets and (lock) bolt joints - Specifications
and qualification of testing procedures.
ISO 9692-2:1998 - Welding and allied processes - Joint preparation - Part 2: Submerged arc
welding of steels.
ISO 9692-4:2003 - Welding and allied processes - Recommendations for joint preparation - Part
4: Clad steels.
ISO 4063:2009 - Welding and allied processes - Nomenclature of processes and reference
numbers.
ISO 2503:2009 - Gas welding equipment - Pressure regulators and pressure regulators with flowmetering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30
MPa).
ISO 15011-4:2006 - Health and safety in welding and allied processes - Laboratory method for
sampling fume and gases - Part 4: Fume data sheets.
ISO 10042:2005 - Welding - Arc-welded joints in aluminium and its alloys - Quality levels for
imperfections.
ISO 9606-2:2004 - Qualification test of welders - Fusion welding - Part 2: Aluminium and
aluminium alloys.
ISO 9455-5:2014 - Soft soldering fluxes - Test methods - Part 5: Copper mirror test.
ISO/TC 45 - Rubber and rubber products
ISO 4642-1:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1:
Semi-rigid hoses for fixed systems.
ISO 4642-2:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 2:
Semi-rigid hoses (and hose assemblies) for pumps and vehicles.
ISO 6808:2014 - Plastics hoses and hose assemblies for suction and low-pressure discharge of
petroleum liquids - Specification.
ISO 27127:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the
transfer of liquid petroleum gas and liquefied natural gas - Specification.
ISO 8030:2014 - Rubber and plastics hoses - Method of test for flammability.
ISO 23233:2009 - Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion
using a driven, vertical abrasive disc.
ISO 9924-3:2009 - Rubber and rubber products - Determination of the composition of
vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers,
halogenated rubbers and polysiloxane rubbers after extraction.
ISO 18766:2014 - Rubber, vulcanized or thermoplastic - Low temperature testing - General
introduction and guide.
ISO 6101-3:2014 - Rubber - Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content.
ISO 6101-4:2014 - Rubber - Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content.
ISO/TS 22762-4:2014 - Elastomeric seismic-protection isolators - Part 4: Guidance on the
application of ISO 22762-3.
ISO 3302-1:2014 - Rubber - Tolerances for products - Part 1: Dimensional tolerances.
ISO 3385:2014 - Flexible cellular polymeric materials - Determination of fatigue by constant-load
pounding.
ISO/TC 46 - Information and documentation
ISO 6630:1986 - Documentation - Bibliographic control characters.
ISO 23950:1998 - Information and documentation - Information retrieval (Z39.50) - Application
service definition and protocol specification.
ISO 20775:2009 - Information and documentation - Schema for holdings information.
ISO 15836:2009 - Information and documentation - The Dublin Core metadata element set.
ISO 18626:2014 - Information and documentation - Interlibrary Loan Transactions.
ISO 4:1997 - Information and documentation - Rules for the abbreviation of title words and titles
of publications.
ISO 10324:1997 - Information and documentation - Holdings statements - Summary level.
ISO 21047:2009 - Information and documentation - International Standard Text Code (ISTC).
ISO 10957:2009 - Information and documentation - International standard music number (ISMN).
ISO/TR 17068:2012 - Information and documentation - Trusted third party repository for digital
records.
ISO/TC 47 - Chemistry
ISO 11014:2009 - Safety data sheet for chemical products - Content and order of sections.
ISO/TC 48 - Laboratory equipment
ISO 24450:2005 - Laboratory glassware - Wide-necked boiling flasks.
ISO/TC 51 - Pallets for unit load method of materials handling
ISO 6780:2003 - Flat pallets for intercontinental materials handling - Principal dimensions and
tolerancesHide details
ISO 18333:2014 - Pallets for materials handling - Quality of new wooden components for flat
pallets.
ISO/TC 54 - Essential oils
ISO 3524:2003 - Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume).
ISO 855:2003 - Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression.
ISO 8898:2003 - Oil of mandarin petitgrain (Citrus reticulata Blanco).
ISO 9301:2003 - Oil of cumin seed (Cuminum cyminum L.).
ISO 8899:2003 - Oil of lemon petitgrain [Citrus limon (L.) Burm. f.].
ISO 3761:2005 - Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora
(Meisn.) Mez.).
ISO 21093:2003 - Oil of dwarf pine (Pinus mugo Turra).
ISO 21390:2005 - Oil of wintergreen, China (Gaultheria yunnanensis (Franch.) Rehd.), redistilled.
ISO 8900:2005 - Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)].
ISO 9844:2006 - Oil of bitter orange (Citrus aurantium L.).
ISO 3519:2005 - Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle).
ISO 4720:2009 - Essential oils - Nomenclature.
ISO 8902:2009 - Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.),
French type.
ISO 9235:2013/Cor 1:2014
ISO/TC 58 - Gas cylinders
ISO 14245:2006 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
ISO 15995:2006 - Gas cylinders - Specifications and testing of LPG cylinder valves - Manually
operated.
ISO 14246:2014 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations.
ISO 10297:2014 - Gas cylinders - Cylinder valves - Specification and type testing.
ISO 20703:2006 - Gas cylinders - Refillable welded aluminium-alloy cylinders - Design,
construction and testing.
ISO 3500:2005 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installations
on ships.
ISO 9809-4:2014 - Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa.
ISO 10460:2005 - Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and
testing.
ISO 11755:2005 - Gas cylinders - Cylinder bundles for compressed and liquefied gases
(excluding acetylene) - Inspection at time of filling.
ISO 21007-1:2005 - Gas cylinders - Identification and marking using radio frequency identification
technology - Part 1: Reference architecture and terminology.
ISO/TC 59 - Buildings and civil engineering works
ISO 1006:1983 - Building construction - Modular coordination - Basic module.
ISO 1040:1983 - Building construction - Modular coordination - Multimodules for horizontal
coordinating dimensions
ISO 2777:1974 - Modular co-ordination - Co-ordinating sizes for rigid flat sheet boards used in
building.
ISO 25137-2:2009 - Plastics - Sulfone polymer moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties.
ISO 7792-2:2012 - Plastics - Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties.
ISO 7792-1:2012 - Plastics - Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications.
ISO 14910-1:2013 - Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for
moulding and extrusion - Part 1: Designation system and basis for specification.
ISO 14910-2:2013 - Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for
moulding and extrusion - Part 2: Preparation of test specimens and determination of properties.
ISO 844:2014 - Rigid cellular plastics - Determination of compression properties.
ISO 14896:2009 - Plastics - Polyurethane raw materials - Determination of isocyanate content.
ISO 4895:2014 - Plastics - Liquid epoxy resins - Determination of tendency to crystallize.
ISO 18352:2009 - Carbon-fibre-reinforced plastics - Determination of compression-after-impact
properties at a specified impact-energy level.
ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO 13503-5:2006 - Petroleum and natural gas industries - Completion fluids and materials - Part
5: Procedures for measuring the long-term conductivity of proppants.
ISO 10431:1993 - Petroleum and natural gas industries - Pumping units - Specification.
ISO 13628-2:2006 - Petroleum and natural gas industries - Design and operation of subsea
production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications.
ISO 13628-10:2005 - Petroleum and natural gas industries - Design and operation of subsea
production systems - Part 10: Specification for bonded flexible pipe.
ISO 15463:2003 - Petroleum and natural gas industries - Field inspection of new casing, tubing
and plain-end drill pipe.
ISO 19903:2006 - Petroleum and natural gas industries - Fixed concrete offshore structures.
ISO/TC 68 - Financial services
ISO 15782-2:2001Banking - Certificate management - Part 2: Certificate extensions.
ISO 9564-2:2014 - Financial services -- Personal Identification Number (PIN) management and
security -- Part 2: Approved algorithms for PIN encipherment.
ISO/TC 69 - Applications of statistical methods
ISO 3534-2:2006 - Statistics - Vocabulary and symbols - Part 2: Applied statistics.
ISO 7873:1993 - Control charts for arithmetic average with warning limits.
ISO 7870-2:2013 - Control charts - Part 2: Shewhart control charts.
ISO 22514-8:2014 - Statistical methods in process management - Capability and performance Part 8: Machine performance of a multi-state production process.
ISO 22514-1:2014 - Statistical methods in process management - Capability and performance Part 1: General principles and concepts.
ISO 11095:1996 - Linear calibration using reference materials.
ISO 10576-1:2003 - Statistical methods - Guidelines for the evaluation of conformity with
specified requirements - Part 1: General principles.
ISO 11843-7:2012 - Capability of detection - Part 7: Methodology based on stochastic properties
of instrumental noise.
ISO 16336:2014 - Applications of statistical and related methods to new technology and product
development process - Robust parameter design (RPD).
IS/TC 70 - Internal combustion engines
ISO 21006:2006 - Internal combustion engines - Engine weight (mass) declaration.
ISO 3046-3:2006 - Reciprocating internal combustion engines - Performance - Part 3: Test
measurements.
ISO 8528-3:2005 - Reciprocating internal combustion engine driven alternating current generating
sets - Part 3: Alternating current generators for generating sets.
ISO 4548-15:2014 - Methods of test for full-flow lubricating oil filters for internal combustion
engines - Part 15: Vibration fatigue test for composite filter housings.
ISO/TC 71 - Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-6:2004 - Testing of concrete - Part 6: Sampling, preparing and testing of concrete
cores.
ISO 1920-3:2004 - Testing of concrete - Part 3: Making and curing test specimens.
ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 8871-2:2003 - Elastomeric parts for parenterals and for devices for pharmaceutical use - Part
2: Identification and characterization.
ISO 8871-3:2003 - Elastomeric parts for parenterals and for devices for pharmaceutical use - Part
3: Determination of released-particle count.
ISO 8871-4:2006 - Elastomeric parts for parenterals and for devices for pharmaceutical use - Part
4: Biological requirements and test methods.
ISO 15137:2005 - Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods.
ISO 8871-5:2005 - Elastomeric parts for parenterals and for devices for pharmaceutical use - Part
5: Functional requirements and testing.
ISO 8362-7:2006 - Injection containers and accessories - Part 7: Injection caps made of
aluminium-plastics combinations without overlapping plastics part.
ISO 8536-7:2009 - Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics
combinations for infusion bottles.
ISO 10985:2009 - Caps made of aluminium-plastics combinations for infusion bottles and
injection vials - Requirements and test methods.
ISO/TC 79 - Light metals and their alloys
ISO 3134-1:1985 - Light metals and their alloys - Terms and definitions - Part 1: Materials.
ISO 3134-2:1985 - Light metals and their alloys - Terms and definitions - Part 2: Unwrought
products
ISO 3134-3:1985 - Light metals and their alloys - Terms and definitions - Part 3: Wrought
products.
ISO 3134-4:1985 - Light metals and their alloys - Terms and definitions - Part 4: Castings.
ISO 3134-5:1981 - Light metals and their alloys - Terms and definitions - Part 5: Methods of
processing and treatment.
ISO 115:2003 - Unalloyed aluminium ingots for remelting - Classification and composition.
ISO 25902-1:2009 - Titanium pipes and tubes - Non-destructive testing - Part 1: Eddy-current
examination.
ISO/TC 82 - Mining
ISO 3154:1988 - Stranded wire ropes for mine hoisting - Technical delivery requirements.
ISO 3155:1976 - Stranded wire ropes for mine hoisting - Fibre components - Characteristics and
tests.
ISO 3156:1976 - Stranded wire ropes for mine hoisting - Impregnating compounds, lubricants
and service dressings - Characteristics and tests.
ISO 5614:1988 - Locked coil wire ropes for mine hoisting - Technical delivery requirements.
ISO/TC 83 - Sports and other recreational facilities and equipment
ISO 7152:1997 - Camping tents and caravan awnings - Vocabulary and list of equivalent terms.
ISO 20957-2:2005 - Stationary training equipment - Part 2: Strength training equipment,
additional specific safety requirements and test methods.
ISO 20957-4:2005 - Stationary training equipment - Part 4: Strength training benches, additional
specific safety requirements and test methods.
ISO 20957-6:2005 - Stationary training equipment - Part 6: Treadmills, additional specific safety
requirements and test methods.
ISO 20957-7:2005 - Stationary training equipment - Part 7: Rowing machines, additional specific
safety requirements and test methods.
ISO 20957-8:2005 - Stationary training equipment - Part 8: Steppers, stairclimbers and climbers Additional specific safety requirements and test methods.
ISO 9119:1990 - Cross-country skis - Binding mounting area - Requirements and test methods.
ISO 11497:1998 - Telemark skis and bindings - Binding mounting area - Requirements and test
methods.
ISO 10958-2:2004 - Snowboards - Binding mounting area - Part 2: Requirements and test
methods for snowboards with inserts.
ISO 14790:2005 - Snowboard plate-bindings - Requirements and test methods.
ISO 22264:2006 - Telemark ski-boots for adults - Interface with Telemark ski-bindings Requirements and test methods.
IS/TC 84 - Devices for administration of medicinal products and intravascular catheters
ISO 21649:2006 - Needle-free injectors for medical use - Requirements and test methods.
ISO 20072:2009 - Aerosol drug delivery device design verification - Requirements and test
methods.
ISO/TC 85 - Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM 51900:2009 - Guide for dosimetry in radiation research on food and agricultural
productsHide details
ISO/ASTM 51205:2009 - Practice for use of a ceric-cerous sulfate dosimetry system.
ISO/ASTM 51538:2009 - Practice for use of the ethanol-chlorobenzene dosimetry system.
ISO 4037-1:1996 - X and gamma reference radiation for calibrating dosemeters and doserate
meters and for determining their response as a function of photon energy - Part 1: Radiation
characteristics and production methods.
ISO 14146:2000 - Radiation protection - Criteria and performance limits for the periodic
evaluation of processors of personal dosemeters for X and gamma radiation.
ISO 4037-2:1997 - X and gamma reference radiation for calibrating dosemeters and doserate
meters and for determining their response as a function of photon energy - Part 2: Dosimetry for
radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV.
ISO 4037-3:1999 - X and gamma reference radiation for calibrating dosemeters and doserate
meters and for determining their response as a function of photon energy - Part 3: Calibration of
area and personal dosemeters and the measurement of their response as a function of energy
and angle of incidence.
ISO 4037-4:2004 - X and gamma reference radiation for calibrating dosemeters and doserate
meters and for determining their response as a function of photon energy - Part 4: Calibration of
area and personal dosemeters in low energy X reference radiation fields.
ISO 21439:2009 - Clinical dosimetry - Beta radiation sources for brachytherapy.
ISO 18589-4:2009 - Measurement of radioactivity in the environment - Soil - Part 4: Measurement
of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry.
ISO 18589-6:2009 - Measurement of radioactivity in the environment - Soil - Part 6: Measurement
of gross alpha and gross beta activities.
ISO 18589-5:2009 - Measurement of radioactivity in the environment - Soil - Part 5: Measurement
of strontium 90.
ISO 11929:2010 - Determination of the characteristic limits (decision threshold, detection limit and
limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and
application.
ISO 18213-3:2009 - Nuclear fuel technology - Tank calibration and volume determination for
nuclear materials accountancy -- Part 3: Statistical methods.
ISO 27467:2009 - Nuclear criticality safety - Analysis of a postulated criticality accident.
ISO 9463:2009 - Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric
acid solutions by spectrophotometry.
ISO 15646:2014 - Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets.
ISO 15366-1:2014 - Nuclear fuel technology - Chemical separation and purification of uranium
and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent
extraction chromatography - Part 1: Samples containing plutonium in the microgram range and
uranium in the milligram range.
ISO 15366-2:2014 - Nuclear fuel technology - Chemical separation and purification of uranium
and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent
extraction chromatography - Part 2: Samples containing plutonium and uranium in the nanogram
range and below.
ISO/TC 86 - Refrigeration and air-conditioning
ISO/R 916:1968 - Testing of refrigerating systems.
ISO 17584:2005 - Refrigerant properties
ISO/TC 87 - Cork
ISO 2385:1993 - Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and
corkwaste - Sampling to determine moisture content.
ISO 633:2007 - Cork - Vocabulary.
ISO 20752:2014 - Cork stoppers - Determination of releasable 2, 4, 6-trichloroanisol (TCA).
ISO/TC 89 - Wood-based panels
ISO 9424:2003 - Wood-based panels - Determination of dimensions of test pieces.
ISO 16978:2003 - Wood-based panels - Determination of modulus of elasticity in bending and of
bending strength.
ISO 16979:2003 - Wood-based panels - Determination of moisture content.
ISO 16981:2003 - Wood-based panels - Determination of surface soundness.
ISO 13311:1997 - Iron ores - Determination of lead content - Flame atomic absorption
spectrometric method.
ISO 2599:2003 - Iron ores - Determination of phosphorus content - Titrimetric method.
ISO 7764:2006 - Iron ores - Preparation of predried test samples for chemical analysis.
ISO 4689-3:2004 - Iron ores - Determination of sulfur content - Part 3: Combustion/infrared
method.
ISO 4689-2:2004 - Iron ores - Determination of sulfur content - Part 2: Combustion/titration
method.
ISO 15634:2005 - Iron ores - Determination of chromium content - Flame atomic absorption
spectrometric method.
ISO 16042:2007 - Iron ores - Guidelines for the use of certified reference materials (CRMs).
ISO 15633:2009 - Iron ores - Determination of nickel - Flame atomic absorption spectrometric
method.
ISO 11534:2006 - Iron ores - Determination of tin - Flame atomic absorption spectrometric
method.
ISO 11535:2006 - Iron ores - Determination of various elements - Inductively coupled plasma
atomic emission spectrometric method.
ISO 5418-1:2006 - Iron ores - Determination of copper - Part 1: 2,2'-Biquinolyl spectrophotometric
method.
ISO 9683-1:2006 - Iron ores - Determination of vanadium - Part 1: BPHA spectrophotometric
method.
ISO 5418-2:2006 - Iron ores - Determination of copper - Part 2: Flame atomic absorption
spectrometric method.
ISO 9517:2007 - Iron ores - Determination of water-soluble chloride - Ion-selective electrode
method.
ISO 9682-2:2006 - Iron ores - Determination of manganese content - Part 2: Periodate
spectrophotometric method.
ISO/TC 105 - Steel wire ropes
ISO 21669:2005 - Steel wire ropes - Determination of rotational properties.
ISO/TC 106 - Dentistry
ISO 17836:2004 - Thermal spraying - Determination of the deposition efficiency for thermal
spraying.
ISO 3882:2003 - Metallic and other inorganic coatings - Review of methods of measurement of
thickness.
ISO 21968:2005 - Non-magnetic metallic coatings on metallic and non-metallic basis materials Measurement of coating thickness - Phase-sensitive eddy-current method.
ISO 2063:2005 - Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and
their alloys.
ISO 14924:2005 - Thermal spraying - Post-treatment and finishing of thermally sprayed coatings.
ISO 4524-3:1985 - Metallic coatings - Test methods for electrodeposited gold and gold alloy
coatings - Part 3: Electrographic tests for porosity.
ISO 4524-6:1988 - Metallic coatings - Test methods for electrodeposited gold and gold alloy
coatings - Part 6: Determination of the presence of residual salts.
ISO 12686:1999 - Metallic and other inorganic coatings - Automated controlled shot-peening of
metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish.
ISO 2093:1986 - Electroplated coatings of tin - Specification and test methods.
ISO 2179:1986 - Electroplated coatings of tin-nickel alloy - Specification and test methods.
ISO 7587:1986 - Electroplated coatings of tin-lead alloys - Specification and test methods.
ISO 15726:2009 - Metallic and other inorganic coatings - Electrodeposited zinc alloys with nickel,
cobalt or iron.
ISO 1456:2009 - Metallic and other inorganic coatings - Electrodeposited coatings of nickel,
nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium.
ISO 1460:1992 - Metallic coatings - Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area.
ISO 4520:1981 - Chromate conversion coatings on electroplated zinc and cadmium coatings.
ISO/TC 108 - Mechanical vibration, shock and condition monitoring
ISO 2041:2009 - Mechanical vibration, shock and condition monitoring - Vocabulary.
ISO 14837-1:2005 - Mechanical vibration - Ground-borne noise and vibration arising from rail
systems - Part 1: General guidance.
ISO 13373-2:2005 - Condition monitoring and diagnostics of machines - Vibration condition
monitoring - Part 2: Processing, analysis and presentation of vibration data.
ISO 14963:2003 - Mechanical vibration and shock - Guidelines for dynamic tests and
investigations on bridges and viaducts.
ISO 7919-4:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
rotating shafts - Part 4: Gas turbine sets with fluid-film bearings.
ISO 7919-3:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
rotating shafts - Part 3: Coupled industrial machines.
ISO 10816-4:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings.
ISO 10816-3:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal
speeds between 120 r/min and 15 000 r/min when measured in situ.
ISO 10816-7:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including
measurements on rotating shafts.
ISO 7919-2:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with
normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min.
ISO 10816-2:2009 - Mechanical vibration - Evaluation of machine vibration by measurements on
non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with
normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min.
ISO 10816-8:2014 - Mechanical vibration -- Evaluation of machine vibration by measurements on
non-rotating parts -- Part 8: Reciprocating compressor systems.
ISO 5347-12:1993 - Methods for the calibration of vibration and shock pick-ups - Part 12: Testing
of transverse shock sensitivity.
ISO 5347-13:1993 - Methods for the calibration of vibration and shock pick-ups - Part 13: Testing
of base strain sensitivity.
ISO 5347-16:1993 - Methods for the calibration of vibration and shock pick-ups - Part 16: Testing
of mounting torque sensitivity.
ISO 5347-18:1993 - Methods for the calibration of vibration and shock pick-ups - Part 18: Testing
of transient temperature sensitivity.
ISO 5347-19:1993 - Methods for the calibration of vibration and shock pick-ups - Part 19: Testing
of magnetic field sensitivity.
ISO 8042:1988 - Shock and vibration measurements - Characteristics to be specified for seismic
pick-ups.
ISO 5347-15:1993 - Methods for the calibration of vibration and shock pick-ups - Part 15: Testing
of acoustic sensitivity.
ISO 16063-1:1998 - Methods for the calibration of vibration and shock transducers - Part 1: Basic
concepts.
ISO 5348:1998 - Mechanical vibration and shock - Mechanical mounting of accelerometers.
ISO 16063-31:2009 - Methods for the calibration of vibration and shock transducers - Part 31:
Testing of transverse vibration sensitivity.
ISO 16063-42:2014 - Methods for the calibration of vibration and shock transducers - Part 42:
Calibration of seismometers with high accuracy using acceleration of gravity.
ISO 10326-1:1992 - Mechanical vibration - Laboratory method for evaluating vehicle seat
vibration - Part 1: Basic requirements.
ISO 13753:1998 - Mechanical vibration and shock - Hand-arm vibration - Method for measuring
the vibration transmissibility of resilient materials when loaded by the hand-arm system.
ISO 13090-1:1998 - Mechanical vibration and shock - Guidance on safety aspects of tests and
experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated
shock.
ISO 13091-2:2003 - Mechanical vibration - Vibrotactile perception thresholds for the assessment
of nerve dysfunction - Part 2: Analysis and interpretation of measurements at the fingertips.
ISO 14835-1:2005 - Mechanical vibration and shock - Cold provocation tests for the assessment
of peripheral vascular function - Part 1: Measurement and evaluation of finger skin temperature.
ISO 14835-2:2005 - Mechanical vibration and shock - Cold provocation tests for the assessment
of peripheral vascular function - Part 2: Measurement and evaluation of finger systolic blood
pressure.
ISO/TC 110 - Industrial trucks
ISO 6055:2004 - Industrial trucks - Overhead guards - Specification and testing.
ISO 22915-3:2014 - Industrial trucks -- Verification of stability - Part 3: Reach and straddle trucks.
ISO 22915-5:2014 - Industrial trucks - Verification of stability - Part 5: Single-side-loading trucks.
ISO 22915-7:2009 - Industrial trucks - Verification of stability - Part 7: Bidirectional and
multidirectional trucks.
ISO 22915-16:2014 - Industrial trucks - Verification of stability - Part 16: Pedestrian-propelled
trucks.
ISO 22915-21:2009 - Industrial trucks - Verification of stability - Part 21: Order-picking trucks with
operator position elevating above 1 200 mm.
ISO/TC 111 - Round steel link chains, chain slings, components and accessories
ISO 8539:2009 - Forged steel lifting components for use with Grade 8 chain.
ISO/TC 113 - Hydrometry
ISO 11657:2014 - Hydrometry - Suspended sediment in streams and canals - Determination of
concentration by surrogate techniques.
ISO 14686:2003 - Hydrometric determinations - Pumping tests for water wells - Considerations
and guidelines for design, performance and use.
ISO/TC 114 - Horology
ISO 12819:2009 - Methods of evaluation of the battery life of a battery-powered watch.
ISO 1112:2009 - Horology - Functional and non-functional jewels.
ISO 14368-3:2003 - Mineral and sapphire watch-glasses - Part 3: Qualitative criteria and test
methods.
ISO/TC 118 - Compressors and pneumatic tools, machines and equipment
ISO 5389:2005 - Turbocompressors - Performance test code.
ISO/TS 17104:2006 - Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance
test method.
ISO 5390:1977 - Compressors - Classification.
ISO/TC 119 - Powder metallurgy
ISO 3369:2006 - Impermeable sintered metal materials and hardmetals - Determination of
density.
ISO 3907:2009 - Hardmetals - Determination of total carbon - Gravimetric method.
ISO 3908:2009 - Hardmetals - Determination of insoluble (free) carbon - Gravimetric method.
ISO 28079:2009 - Hardmetals - Palmqvist toughness test.
ISO 4378-5:2009 - Plain bearings - Terms, definitions, classification and symbols - Part 5:
Application of symbols.
ISO/TR 17606:2014 - Plain bearings - Lubrication characteristics of crosshead pin bearings for
low-speed marine diesel engines.
ISO/TC 126 - Tobacco and tobacco products
ISO 18144:2003 - Environmental tobacco smoke - Estimation of its contribution to respirable
suspended particles - Method based on solanesol.
ISO 18145:2003 - Environmental tobacco smoke - Determination of vapour phase nicotine and 3ethenylpyridine in air - Gas-chromatographic method.
ISO 20369:2009 - Material used for producing wrappings for cigarette filters, cigarettes and other
tobacco products - Determination of citrate content.
ISO 20370:2009 - Material used for producing wrappings for cigarette filters, cigarettes and other
tobacco products - Determination of acetate content.
ISO/TC 127 - Earth-moving machinery
ISO 8813:1992 - Earth-moving machinery - Lift capacity of pipelayers and wheeled tractors or
loaders equipped with side boom.
ISO 10570:2004 - Earth-moving machinery - Articulated frame lock - Performance requirements.
ISO 14401-1:2009 - Earth-moving machinery - Field of vision of surveillance and rear-view
mirrors - Part 1: Test methods.
ISO 14401-2:2009 - Earth-moving machinery - Field of vision of surveillance and rear-view
mirrors - Part 2: Performance criteria.
ISO 10968:2004 - Earth-moving machinery - Operator's controls.
ISO 3449:2005 - Earth-moving machinery - Falling-object protective structures - Laboratory tests
and performance requirements.
ISO 10263-1:2009 - Earth-moving machinery - Operator enclosure environment - Part 1: Terms
and definitions.
ISO 10263-2:2009 - Earth-moving machinery - Operator enclosure environment - Part 2: Air filter
element test method.
ISO 10263-3:2009 - Earth-moving machinery - Operator enclosure environment - Part 3:
Pressurization test method.
ISO 12238:2001 - Pneumatic fluid power - Directional control valves - Measurement of shifting
time.
ISO 5782-1:1997 - Pneumatic fluid power - Compressed-air filters - Part 1: Main characteristics to
be included in suppliers' literature and product marking requirements.
ISO 16874:2004 - Hydraulic fluid power - Identification of manifold assemblies and their
components.
ISO 20401:2005 - Pneumatic fluid power systems - Directional control valves - Specification of
pin assignment for electrical round connectors of diameters 8 mm and 12 mm.
ISO 6301-1:2009 - Pneumatic fluid power - Compressed-air lubricators - Part 1: Main
characteristics to be included in supplier's literature and product-marking requirements.
ISO 2943:1998 - Hydraulic fluid power - Filter elements - Verification of material compatibility with
fluids.
ISO 2941:2009 - Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure
rating.
ISO 6194-4:2009 - Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4:
Performance test procedures.
ISO 6194-2:2009 - Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 2:
Vocabulary.
ISO 15086-3:2008 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics
of components and systems - Part 3: Measurement of hydraulic impedance.
ISO 10770-1:2009 - Hydraulic fluid power - Electrically modulated hydraulic control valves - Part
1: Test methods for four-port directional flow-control valves.
ISO 12715:2014 - Non-destructive testing - Ultrasonic testing - Reference blocks and test
procedures for the characterization of contact probe sound beams.
ISO 17405:2014 - Non-destructive testing - Ultrasonic testing - Technique of testing claddings
produced by welding, rolling and explosion.
ISO/TS 22809:2007 - Non-destructive testing - Discontinuities in specimens for use in
qualification examinations.
ISO/TC 136 - Furniture
ISO 9221-1:1992 - Furniture - Children's high chairs - Part 1: Safety requirements.
ISO 9221-2:1992 - Furniture - Children's high chairs -- Part 2: Test methods.
ISO/TS 10839:2000 - Polyethylene pipes and fittings for the supply of gaseous fuels - Code of
practice for design, handling and installation.
ISO 14531-4:2006 - Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for
the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and
installation guidelines.
ISO 6993-1:2006 - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply
of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa).
ISO 6993-2:2006 - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply
of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa).
ISO 6993-3:2006 - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply
of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100
kPa).
ISO 6993-4:2006 - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply
of gaseous fuels - Part 4: Code of practice for design, handling and installation.
ISO 17484-2:2009 - Plastics piping systems - Multilayer pipe systems for indoor gas installations Part 2: Code of pratice.
ISO 21307:2011 - Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene
(PE) pipes and fittings used in the construction of gas and water distribution systems.
ISO 4059:1978 - Polyethylene (PE) pipes - Pressure drop in mechanical pipe-jointing systems Method of test and requirements.
ISO/TR 16913:1999 - Plastics pipes and fittings - Definitions of types of test.
ISO 11414:2009 - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or
pipe/fitting test piece assemblies by butt fusion.
ISO/TR 18124:2006 - Plastics piping systems - Multilayer M (metal) pipes - Test method for
strength of the weld line in the metal layer and bonding between layers by use of a cone.
ISO 24033:2009 - Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time
and temperature on the expected strength.
ISO 13479:2009 - Polyolefin pipes for the conveyance of fluids - Determination of resistance to
crack propagation - Test method for slow crack growth on notched pipes.
ISO 3213:2009 - Polypropylene (PP) pipes - Effect of time and temperature on the expected
strength.
ISO 10928:2009 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes
and fittings - Methods for regression analysis and their use.
ISO 8521:2009 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes Test methods for the determination of the apparent initial circumferential tensile strength.
ISO 8233:1988 - Thermoplastics valves - Torque - Test method.
ISO 9393-2:2005 - Thermoplastics valves for industrial applications - Pressure test methods and
requirements - Part 2: Test conditions and basic requirements.
ISO/TC 142 - Cleaning equipment for air and other gases
ISO 6584:1981 - Cleaning equipment for air and other gases - Classification of dust separators.
ISO/TC 145 - Graphical symbols
ISO 23601:2009 - Safety identification - Escape and evacuation plan signs.
ISO 80416-2:2001 - Basic principles for graphical symbols for use on equipment - Part 2: Form
and use of arrows.
ISO/TC 146 - Air quality
ISO 15713:2006 - Stationary source emissions - Sampling and determination of gaseous fluoride
content.
ISO 23210:2009 - Stationary source emissions - Determination of PM10/PM2,5 mass
concentration in flue gas - Measurement at low concentrations by use of impactors.
ISO 17735:2009 - Workplace atmospheres - Determination of total isocyanate groups in air using
1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography.
ISO 14956:2002 - Air quality - Evaluation of the suitability of a measurement procedure by
comparison with a required measurement uncertainty.
ISO 11222:2002 - Air quality - Determination of the uncertainty of the time average of air quality
measurements.
ISO 16000-32:2014 - Indoor air - Part 32: Investigation of buildings for the occurrence of
pollutants.
ISO/TC 147 - Water quality
ISO 15839:2003 - Water quality - On-line sensors/analysing equipment for water - Specifications
and performance tests.
ISO 17381:2003 - Water quality - Selection and application of ready-to-use test kit methods in
water analysis.
ISO 16265:2009 - Water quality - Determination of the methylene blue active substances (MBAS)
index - Method using continuous flow analysis (CFA).
ISO 17289:2014 - Water quality - Determination of dissolved oxygen - Optical sensor method.
ISO 10705-3:2003 - Water quality - Detection and enumeration of bacteriophages - Part 3:
Validation of methods for concentration of bacteriophages from water.
ISO 20079:2005 - Water quality - Determination of the toxic effect of water constituents and
waste water on duckweed (Lemna minor) - Duckweed growth inhibition test.
ISO 5667-8:1993 - Water quality - Sampling - Part 8: Guidance on the sampling of wet deposition.
ISO 5667-10:1992 - Water quality - Sampling - Part 10: Guidance on sampling of waste waters.
ISO 5667-7:1993 - Water quality - Sampling - Part 7: Guidance on sampling of water and steam
in boiler plants.
ISO 5667-15:2009 - Water quality - Sampling - Part 15: Guidance on the preservation and
handling of sludge and sediment samples.
ISO 5667-6:2014 - Water quality - Sampling - Part 6: Guidance on sampling of rivers and
streams.
ISO/TC 149 - Cycles
ISO 8098:2014 - Cycles - Safety requirements for bicycles for young children.
ISO 4210-3:2014 - Cycles - Safety requirements for bicycles - Part 3: Common test methods.
ISO 4210-1:2014 - Cycles - Safety requirements for bicycles - Part 1: Terms and definitions.
ISO 4210-2:2014 - Cycles - Safety requirements for bicycles - Part 2: Requirements for city and
trekking, young adult, mountain and racing bicycles.
ISO 4210-4:2014 - Cycles - Safety requirements for bicycles - Part 4: Braking test methods.
ISO 4210-5:2014 - Cycles - Safety requirements for bicycles - Part 5: Steering test methods.
ISO 4210-7:2014 - Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test
methods.
ISO 4210-6:2014 - Cycles - Safety requirements for bicycles - Part 6: Frame and fork test
methods.
ISO 4210-9:2014 - Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test
methods.
ISO 4210-8:2014 - Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system test
methods.
ISO/TC 150 - Implants for surgery
ISO/TR 9586:1988 - Implants for surgery - Usage of terms "valgus" and "varus" in orthopaedic
surgery.
ISO 23317:2014 - Implants for surgery - In vitro evaluation for apatite-forming ability of implant
materials.
ISO/TS 15539:2000 - Cardiovascular implants - Endovascular prostheses.
ISO 25539-1:2003 - Cardiovascular implants - Endovascular devices - Part 1: Endovascular
prostheses.
ISO 7199:2009 - Cardiovascular implants and artificial organs - Blood-gas exchangers
(oxygenators).
ISO 15674:2009 - Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous
reservoir systems (with/without filter) and soft venous reservoir bags.
ISO 15675:2009 - Cardiovascular implants and artificial organs - Cardiopulmonary bypass
systems - Arterial blood line filters.
ISO 7206-10:2003 - Implants for surgery - Partial and total hip-joint prostheses - Part 10:
Determination of resistance to static load of modular femoral heads.
ISO 14242-3:2009 - Implants for surgery - Wear of total hip-joint prostheses - Part 3: Loading and
displacement parameters for orbital bearing type wear testing machines and corresponding
environmental conditions for test.
ISO/TC 153 - Valves
ISO 7259:1988 - Predominantly key-operated cast iron gate valves for underground use.
ISO 5996:1984 - Cast iron gate valves.
ISO 12149:1999 - Bolted bonnet steel globe valves for general-purpose applications.
ISO/TC 155 - Nickel and nickel alloys
ISO 11433:1993 - Nickel alloys - Determination of titanium content - Diantipyrylmethane
molecular absorption spectrometric method.
ISO 11438-1:1993 - Ferronickel - Determination of trace-element content by electrothermal
atomic absorption spectrometric method - Part 1: General requirements and sample dissolution.
ISO 14490-1:2005 - Optics and optical instruments - Test methods for telescopic systems - Part
1: Test methods for basic characteristics.
ISO 14133-1:2006 - Optics and optical instruments - Specifications for binoculars, monoculars
and spotting scopes - Part 1: General purpose instruments.
ISO 14490-2:2005 - Optics and optical instruments - Test methods for telescopic systems - Part
2: Test methods for binocular systems.
ISO 14490-4:2005 - Optics and optical instruments - Test methods for telescopic systems - Part
4: Test methods for astronomical telescopes.
ISO 14490-7:2005 - Optics and optical instruments - Test methods for telescopic systems - Part
7: Test methods for limit of resolution.
ISO 14133-2:2006 - Optics and optical instruments - Specifications for binoculars, monoculars
and spotting scopes - Part 2: High performance instruments.
ISO 14134:2006 - Optics and optical instruments - Specifications for astronomical telescopes.
ISO 8037-2:1997 - Optics and optical instruments - Microscopes - Slides - Part 2: Quality of
material, standards of finish and mode of packaging.
ISO 8036:2006 - Optics and photonics - Microscopes - Immersion liquids for light microscopy.
ISO 11884-1:2006 - Optics and photonics - Minimum requirements for stereomicroscopes - Part
1: Stereomicroscopes for general use.
ISO 11884-2:2007 - Optics and photonics - Minimum requirements for stereomicroscopes - Part
2: High performance microscopes.
ISO 10935:2009 - Microscopes - Interfacing connection type C.
ISO 17123-7:2005 - Optics and optical instruments - Field procedures for testing geodetic and
surveying instruments - Part 7: Optical plumbing instruments.
ISO 12858-3:2005 - Optics and optical instruments - Ancillary devices for geodetic instruments Part 3: Tribrachs.
ISO 10940:2009 - Ophthalmic instruments - Fundus cameras.
ISO 7998:2005 - Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary.
ISO 8612:2009 - Ophthalmic instruments - Tonometers.
ISO 8596:2009 - Ophthalmic optics - Visual acuity testing - Standard optotype and its
presentation.
ISO 15254:2009 - Ophthalmic optics and instruments - Electro-optical devices for enhancing low
vision.
ISO/TS 22559-4:2011 - Safety requirements for lifts (elevators) - Part 4: Global conformity
assessment procedures (GCAP) - Certification and accreditation requirements.
ISO 22201-2:2013 - Lifts (elevators), escalators and moving walks - Programmable electronic
systems in safety related applications - Part 2: Escalators and moving walks (PESSRAE).
ISO/TR 22201-3:2013 - Lifts (elevators), escalators and moving walks - Programmable electronic
systems in safety related applications - Part 3: Life cycle guideline for programmable electronic
systems related to PESSRAL and PESSRAE.
ISO/TC 180 - Solar energy
ISO 22975-3:2014 - Solar energy - Collector components and materials - Part 3: Absorber
surface durability.
ISO/TC 183 - Copper, lead, zinc and nickel ores and concentrates
ISO 12740:1998 - Lead sulfide concentrates - Determination of silver and gold contents - Fire
assay and flame atomic absorption spectrometric method using scorification or cupellation.
ISO 11441:1995 - Lead sulfide concentrates - Determination of lead content - Back titration of
EDTA after precipitation of lead sulfate.
ISO 13545:2000 - Lead sulfide contentrates - Determination of lead content - EDTA titration
method after acid digestion.
ISO 13658:2000 - Zinc sulfide concentrates - Determination of zinc content - Hydroxide
precipitation and EDTA titrimetric method.
ISO 15248:1998 - Zinc sulfide concentrates - Determination of silver and gold contents - Fire
assay and flame atomic absorption spectrometric method using scorification or cupellation.
ISO 15249:1998 - Zinc sulfide concentrates - Determination of gold content - Acid
dissolution/solvent extraction/flame atomic absorption spectrometric method.
ISO 10378:2005 - Copper, lead and zinc sulfide concentrates - Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method.
ISO 12745:2008 - Copper, lead and zinc ores and concentrates - Precision and bias of mass
measurement techniques.
ISO/TC 184 - Automation systems and integration
ISO 14649-12:2005 - Industrial automation systems and integration - Physical device control Data model for computerized numerical controllers - Part 12: Process data for turning.
ISO 12402-8:2006 - Personal flotation devices - Part 8: Accessories - Safety requirements and
test methods.
ISO 12402-9:2006 - Personal flotation devices - Part 9: Test methods.
ISO 12401:2009 - Small craft - Deck safety harness and safety line - Safety requirements and
test methods.
ISO/TC 189 - Ceramic tile
ISO 10545-11:1994 - Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles.
ISO 10545-4:2014 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking
strength.
ISO/TC 190 - Soil quality
ISO 11277:2009 - Soil quality - Determination of particle size distribution in mineral soil material Method by sieving and sedimentation.
ISO 15709:2002 - Soil quality - Soil water and the unsaturated zone - Definitions, symbols and
theory.
ISO 15903:2002 - Soil quality - Format for recording soil and site information.
ISO 10381-7:2005 - Soil quality - Sampling - Part 7: Guidance on sampling of soil gas.
ISO 10381-1:2002 - Soil quality - Sampling - Part 1: Guidance on the design of sampling
programmes.
ISO 10381-2:2002 - Soil quality - Sampling - Part 2: Guidance on sampling techniques.
ISO 10381-4:2003 - Soil quality - Sampling - Part 4: Guidance on the procedure for investigation
of natural, near-natural and cultivated sites.
ISO 10381-5:2005 - Soil quality - Sampling - Part 5: Guidance on the procedure for the
investigation of urban and industrial sites with regard to soil contamination.
ISO 23161:2009 - Soil quality - Determination of selected organotin compounds - Gaschromatographic method.
ISO 14388-1:2014 - Soil quality - Acid-base accounting procedure for acid sulfate soils - Part 1:
Introduction and definitions, symbols and acronyms, sampling and sample preparation.
ISO 14388-2:2014 - Soil quality - Acid-base accounting procedure for acid sulfate soils - Part 2:
Chromium reducible sulfur (CRS) methodology.
ISO 14388-3:2014 - Soil quality - Acid-base accounting procedure for acid sulfate soils - Part 3:
Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) methodology.
ISO 23611-1:2006 - Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and
formalin extraction of earthworms.
ISO 23611-2:2006 - Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction
of micro-arthropods (Collembola and Acarina).
ISO 15952:2006 - Soil quality - Effects of pollutants on juvenile land snails (Helicidae) Determination of the effects on growth by soil contamination.
ISO 23753-1:2005 - Soil quality - Determination of dehydrogenase activity in soils - Part 1:
Method using triphenyltetrazolium chloride (TTC).
ISO 23753-2:2005 - Soil quality - Determination of dehydrogenase activity in soils - Part 2:
Method using iodotetrazolium chloride (INT).
ISO 10381-6:2009 - Soil quality - Sampling - Part 6: Guidance on the collection, handling and
storage of soil under aerobic conditions for the assessment of microbiological processes,
biomass and diversity in the laboratory.
ISO/TC 192 - Gas turbines
ISO 21789:2009 - Gas turbine applications - Safety.
ISO/TC 193 - Natural gas
ISO/TR 22302:2014
Natural gas - Calculation of methane number.
ISO 14532:2014 - Natural gas - Vocabulary.
ISO 6978-1:2003 - Natural gas - Determination of mercury - Part 1: Sampling of mercury by
chemisorption on iodine.
ISO 6978-2:2003 - Natural gas - Determination of mercury - Part 2: Sampling of mercury by
amalgamation on gold/platinum alloy.
ISO 6974-5:2014 - Natural gas - Determination of composition and associated uncertainty by gas
chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons
and C6+ hydrocarbons.
ISO/TC 195 - Building construction machinery and equipment
ISO 11375:1998 - Building construction machinery and equipment - Terms and definitions.
ISO 11886:2002 - Building construction machinery and equipment - Pile driving and extracting
equipment - Terminology and commercial specifications.
ISO 15642:2003 - Road construction and maintenance equipment - Asphalt mixing plants Terminology and commercial specifications.
ISO 15689:2003 - Road construction and maintenance equipment - Powder binder spreaders Terminology and commercial specifications.
ISO/TC 198 - Sterilization of health care products
ISO 13408-4:2005 - Aseptic processing of health care products - Part 4: Clean-in-place
technologies.
ISO 15883-1:2006 - Washer-disinfectors - Part 1: General requirements, terms and definitions
and tests.
ISO 25424:2009 - Sterilization of medical devices - Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical
devices.
ISO 15883-1:2006/Amd 1:2014 - Washer-disinfectors-- Part 1: General requirements, terms and
definitions and tests.
ISO 11135:2014 - Sterilization of health-care products - Ethylene oxide - Requirements for the
development, validation and routine control of a sterilization process for medical devices.
ISO 11607-1:2006/Amd 1:2014 - Packaging for terminally sterilized medical devices-- Part 1:
Requirements for materials, sterile barrier systems and packaging systems.
ISO/TC 199 - Safety of machinery
ISO 14123-1:1998 - Safety of machinery - Reduction of risks to health from hazardous
substances emitted by machinery - Part 1: Principles and specifications for machinery
manufacturers.
ISO 14123-2:1998 - Safety of machinery - Reduction of risks to health from hazardous
substances emitted by machinery - Part 2: Methodology leading to verification procedures.
ISO 21469:2006 - Safety of machinery - Lubricants with incidental product contact - Hygiene
requirements.
ISO 29042-3:2009 - Safety of machinery - Evaluation of the emission of airborne hazardous
substances - Part 3: Test bench method for the measurement of the emission rate of a given
pollutant.
ISO 18756:2003 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface
crack in flexure (SCF) method.
ISO 18757:2003 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET
method.
ISO 20501:2003 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull
statistics for strength data.
ISO 20508:2003 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of light transmittance of ceramic films with transparent substrate.
ISO 20509:2003 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of oxidation resistance of non-oxide monolithic ceramics
ISO 20502:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of adhesion of ceramic coatings by scratch testing.
ISO 22214:2006 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test
method for cyclic bending fatigue of monolithic ceramics at room temperature.
ISO 22215:2006 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test
method for tensile creep of monolithic ceramics.
ISO 24369:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of content of coarse particles in ceramic powders by wet sieving method.
ISO 17092:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions.
ISO 18452:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thickness of ceramic films by contact-probe profilometer.
ISO 20505:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at
ambient temperature by the compression of double-notched test pieces and by the Iosipescu test.
ISO 20506:2005 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient
temperature by the Iosipescu test.
ISO 26423:2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of coating thickness by crater-grinding method.
ISO 27448:2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test
method for self-cleaning performance of semiconducting photocatalytic materials - Measurement
of water contact angle.
ISO 17142:2014 - Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude.
ISO 17139:2014 -Fine ceramics (advanced ceramics, advanced technical ceramics) Thermophysical properties of ceramic composites -- Determination of thermal expansion.
ISO/TC 207 - Environmental management
ISO 14050:2009 - Environmental management - Vocabulary.
ISO 14025:2006 - Environmental labels and declarations - Type III environmental declarations Principles and procedures.
ISO 14046:2014 - Environmental management - Water footprint - Principles, requirements and
guidelines.
ISO/TC 210 - Quality management and corresponding general aspects for medical devices
ISO 594-2:1998 - Conical fittings with 6 % (Luer) taper for syringes, needles and certain other
medical equipment - Part 2: Lock fittings.
ISO/TC 211 - Geographic information/Geomatics
ISO 19144-1:2009 - Geographic information - Classification systems - Part 1: Classification
system structure.
ISO 19115-2:2009 - Geographic information - Metadata - Part 2: Extensions for imagery and
gridded data.
ISO 19111-2:2009 - Geographic information - Spatial referencing by coordinates - Part 2:
Extension for parametric values
ISO/TS 19130:2010 - Geographic information - Imagery sensor models for geopositioning.
ISO/TS 19130-2:2014 - Geographic information - Imagery sensor models for geopositioning - Part
2: SAR, InSAR, lidar and sonar.
ISO/TS 19159-1:2014 - Geographic information - Calibration and validation of remote sensing
imagery sensors and data - Part 1: Optical sensors.
ISO/TC 212 - Clinical laboratory testing and in vitro diagnostic test systems
ISO 15195:2003 - Laboratory medicine - Requirements for reference measurement laboratories
ISO/TS 22367:2008 - Medical laboratories - Reduction of error through risk management and
continual improvement.
ISO/TC 213 - Dimensional and geometrical product specifications and verification
ISO 4291:1985 - Methods for the assessement of departure from roundness - Measurement of
variations in radius.
ISO 5459:2011 - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums
and datum systems.
ISO 1101:2012 - Geometrical product specifications (GPS) - Geometrical tolerancing Tolerances of form, orientation, location and run-out.
ISO/TC 214 - Elevating work platforms
ISO 16653-2:2009 - Mobile elevating work platforms - Design, calculations, safety requirements
and test methods relative to special features - Part 2: MEWPs with non-conductive (insulating)
components.
ISO 20381:2009 - Mobile elevating work platforms - Symbols for operator controls and other
displays.
ISO/TC 215 - Health informatics
ISO/TR 21089:2004 - Health informatics - Trusted end-to-end information flows.
ISO 18232:2006 - Health Informatics - Messages and communication -- Format of length limited
globally unique string identifiers.
ISO 25720:2009 - Health informatics - Genomic Sequence Variation Markup Language (GSVML).
ISO 12967-1:2009 - Health informatics - Service architecture - Part 1: Enterprise viewpoint.
ISO 12967-3:2009 - Health informatics - Service architecture - Part 3: Computational viewpoint.
ISO 12967-2:2009 - Health informatics - Service architecture - Part 2: Information viewpoint.
ISO/TS 17938:2014 - Health informatics - Semantic network framework of traditional Chinese
medicine language system.
ISO/TS 17948:2014 - Health informatics -- Traditional Chinese medicine literature metadata.
ISO/TC 216 - Footwear
ISO 17702:2003 - Footwear - Test methods for uppers - Water resistance.
ISO 17703:2003 - Footwear - Test methods for uppers - High temperature behaviour.
ISO 17705:2003 - Footwear - Test methods for uppers, lining and insocks - Thermal insulation.
ISO 17706:2003 - Footwear - Test methods for uppers - Tensile strength and elongation.
ISO 22653:2003 - Footwear - Test methods for lining and insocks - Static friction.
ISO 18895:2006 - Footwear - Test methods for shanks - Fatigue resistance.
ISO/TS 16181:2011 - Footwear - Critical substances potentially present in footwear and footwear
components - Determination of phthalates in footwear materials.
ISO/TC 218 - Timber
ISO 3347:1976 - Wood - Determination of ultimate shearing stress parallel to grain.
ISO 5328:1978 - Solid wood paving blocks - Softwood paving blocks - Quality requirements.
ISO 3398:1977 - Broadleaved wood raw parquet blocks - Classification of oak parquet blocks.
ISO 5321:1978 - Coniferous wood raw parquet blocks - General characteristics.
ISO 5326:1978 - Solid wood paving blocks - Hardwood paving blocks - Quality requirements.
ISO 5333:1978 - Coniferous wood raw parquet blocks - Classification of fir and spruce parquet
blocks.
ISO 5327:1978 - Solid wood paving blocks - General characteristics.
ISO 5329:1978 - Solid wood paving blocks - Vocabulary.
ISO 5334:1978 - Solid wood parquet - Classification of maritime pine strips.
ISO/TC 219 - Floor coverings
ISO 11379:2009 - Textile floor coverings - Laboratory cleaning procedure using spray extraction.
ISO 17984:2014 - Machine-made textile floor coverings - Determination of dimensional changes
after exposure to heat and/or water.
ISO 11856:2014 - Textile floor coverings - Test methods for the determination of fibre bind using
a Modified Martindale Machine.
ISO/TC 220 - Cryogenic vessels
ISO 3391:1976 - Cryolite, natural and artificial - Determination of calcium content - Flame atomic
absorption method.
ISO 3429:1976 - Sodium fluoride primarily used for the production of aluminium - Determination
of iron content - 1,10- Phenanthroline photometric method.
ISO 4280:1977 - Cryolite, natural and artificial, and aluminium fluoride for industrial use Determination of sulphate content - Barium sulphate gravimetric method.
ISO 901:1976 - Aluminium oxide primarily used for the production of aluminium - Determination of
absolute density - Pyknometer method.
ISO 902:1976 - Aluminium oxide primarily used for the production of aluminium - Measurement of
the angle of repose.
ISO 1620:1976 - Cryolite, natural and artificial - Determination of silica content - Reduced
molybdosilicate spectrophotometric method.
ISO 1694:1976 - Cryolite, natural and artificial - Determination of iron content - 1,10Phenanthroline photometric method.
ISO 1693:1976 - Cryolite, natural and artificial - Determination of fluorine content - Modified
Willard-Winter method.
ISO 2961:1974 - Aluminium oxide primarily used for the production of aluminium - Determination
of an adsorption index.
ISO 3431:1976 - Sodium fluoride primarily used for the production of aluminium - Determination
of soluble sulphates content - Turbidimetric method.
ISO 3430:1976 - Sodium fluoride primarily used for the production of aluminium - Determination
of silica content - Reduced molybdosilicate spectrophotometric method.
ISO 5939:1980 - Carbonaceous materials for the production of aluminium - Pitch for electrodes Determination of water content -- Azeotropic distillation (Dean and Stark) method.
ISO 5940:1981 - Carbonaceous materials for the production of aluminium - Pitch for electrodes Determination of softening point by the ring-and-ball method.
ISO 6375:1980 - Carbonaceous materials for the production of aluminium - Coke for electrodes Sampling.
ISO 6997:1985 - Carbonaceous materials for the production of aluminium - Calcined coke Determination of apparent oil content - Heating method.
ISO 8003:1985 - Carbonaceous materials used in the production of aluminium - Pitch for
electrodes - Measurement of dynamic viscosity.
ISO 8006:1985 - Carbonaceous materials used in the production of aluminium - Pitch for
electrodes - Determination of ash.
ISO 9088:1997 - Carbonaceous materials used for the production of aluminium - Cathode blocks
and prebaked anodes - Determination of the density in xylene by a pyknometric method.
ISO 11412:1998 - Carbonaceous materials for the production of aluminium - Calcined coke Determination of water content.
ISO 14428:2005 - Carbonaceous materials for the production of aluminium - Cold and tepid
ramming pastes - Expansion/shrinkage during baking.
ISO 6998:1997 - Carbonaceous materials for the production of aluminium - Pitch for electrodes Determination of coking value.
ISO 17499:2006 - Carbonaceous materials used in the production of aluminium - Determination
of baking level expressed by equivalent temperature.
ISO 17500:2006 - Aluminium oxide used for the production of primary aluminium - Determination
of attrition index.
ISO 8005:2005 - Carbonaceous materials used in the production of aluminium - Green and
calcined coke - Determination of ash content.
ISO 14435:2005 - Carbonaceous materials for the production of aluminium - Petroleum coke Determination of trace metals by inductively coupled plasma atomic emission spectrometry.
ISO 12986-2:2014 - Carbonaceous materials used in the production of aluminium - Prebaked
anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method.
ISO 10143:2014 - Carbonaceous materials for the production of aluminium - Calcined coke for
electrodes - Determination of the electrical resistivity of granules.
ISO 12986-1:2014 - Carbonaceous materials used in the production of aluminium - Prebaked
anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point
method.
ISO 18515:2014 - Carbonaceous materials for the production of aluminium - Cathode blocks and
baked anodes - Determination of compressive strength.
ISO/TC 229 - Nanotechnologies
ISO/TS 10798:2011 - Nanotechnologies - Charaterization of single-wall carbon nanotubes using
scanning electron microscopy and energy dispersive X-ray spectrometry analysis.
ISO/TS 10868:2011 - Nanotechnologies - Characterization of single-wall carbon nanotubes using
ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy.
ISO/TS 80004-7:2011 - Nanotechnologies - Vocabulary - Part 7: Diagnostics and therapeutics for
healthcare.