Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
IEC 60065 Audio, video and similar electronic apparatus - Safety requirements
IEC 60073 Basic Safety principles for man-machine interface, marking and identification
IEC 60099-4 Metal oxide Surge arresters without gaps for AC systems
IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
IEC 60179 Replaced by IEC 60651 Replaced by IEC 61672-1 Ed.1.0 (2002) Sound Level Meters
o IEC 60268-11 Application of connectors for the interconnection of sound system components
o IEC 60268-12 Application of connectors for broadcast and similar use
o IEC 60268-13 Listening tests on loudspeakers
o IEC 60268-14 Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
o IEC 60268-16 Objective rating of speech intelligibility by speech transmission index
o IEC 60268-17 Standard volume indicators
o IEC 60268-18 Peak programme level meters - Digital audio peak level meter
industrial application)
o IEC 60269-3 Supplementary requirements for fuses for use by unskilled persons (fuses mainly for
IEC 60320 Appliance couplers for household and similar general purposes (IEC connector)
Requirements for Stationary Cooking Ranges, Hobs, Ovens and Similar Appliances
o IEC 60335-2-7 Safety of Household and similar electrical appliances; Part 2-7: Particular
requirements for Deep Fat Fryers, Frying Pans and similar appliances
o IEC 60335-2-14 Safety of Household and similar electrical appliances; Part 2-14: Particular
requirements for Blankets, Pads, Clothing and similar flexible heating appliances
o IEC 60335-2-21 Safety of Household and similar electrical appliances; Part 2-21: Particular
o IEC 60335-2-30 Safety of Household and similar electrical appliances; Part 2-30: Particular
Requirements for Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements
o IEC 60335-2-37 Safety of Household and similar electrical appliances; Part 2-37: Particular
Requirements for Pumps for liquids having a temperature not exceeding 35 degrees C
o IEC 60335-2-42 Safety of Household and similar electrical appliances; Part 2-42: Particular
Requirements for Commercial Electric Forced Convection Ovens, Steam Cookers and SteamConvection Ovens
o IEC 60335-2-43 Safety of Household and similar electrical appliances; Part 2-43: Particular
Requirements for Stationary Circulation Pumps for Heating and Service Water Installations
o IEC 60335-2-52 Safety of Household and similar electrical appliances; Part 2-52: Particular
o IEC 60335-2-67 Safety of Household and similar electrical appliances; Part 2-67: Particular
Requirements for Floor Treatment and Floor Cleaning Machines, for Industrial and Commercial Use
o IEC 60335-2-68 Safety of Household and similar electrical appliances; Part 2-68: Particular
Requirements for Spray Extraction Appliances, for Industrial and Commercial Use
o IEC 60335-2-69 Safety of Household and similar electrical appliances; Part 2-69: Particular
Requirements for Wet and Dry Vacuum Cleaners, Including Power Brush, for Industrial and
Commercial Use
o IEC 60335-2-74 Safety of Household and similar electrical appliances; Part 2-74: Particular
IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing
equipment
IEC 60417-1 Graphical symbols for use on equipment; Part 1: Overview and Application
IEC 60439 Low voltage switchgear and controlgear assemblies; Part 1: Type-Tested and partially
type tested assemblies
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1KV
up to 30KV
IEC 60559: 1989 Binary floating-point arithmetic for microprocessor systems (equivalent to IEEE
754-1989)
IEC 60694 Common clauses for high-voltage switchgear and control gear standards
IEC 60601-1 Medical Electrical Equipment; Part 1: General Requirements for Safety.
o IEC 60601-1-1 Medical electrical equipment; Part 1-1: General requirements for safety - Collateral
Standard: General requirements, tests and guidance for alarm systems in medical electrical
equipment and medical electrical systems
o IEC 60601-1-9 Medical electrical equipment; Part 1-9: General requirements for basic safety and
o IEC 60601-1-10 Medical electrical equipment; Part 1-10: General requirements for basic safety and
IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
o IEC 60603-2: Detail specification for two-part connectors with assessed quality, for printed boards,
for basic grid of 2.54 mm (0.1 in) with common mounting features
o IEC 60603-7-1: Connectors for electronic equipment; Part 7-1: Detail specification for 8-way,
shielded free and fixed connectors with common mating features, with assessed quality
o IEC 60603-7-2: Connectors for electronic equipment; Part 7-2: Detail specification for 8-way,
unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
o IEC 60603-7-4: Connectors for electronic equipment; Part 7-4: Detail specification for 8-way,
unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
o IEC 60603-7-5: Connectors for electronic equipment; Part 7-5: Detail specification for 8-way,
shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
o IEC 60603-7-7: Connectors for electronic equipment; Part 7-7: Detail specification for 8-way,
shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails
for mechanical support of electrical devices in switchgear and controlgear installations.
lasers
o IEC 60747-6 Discrete semiconductor devices; Part 6: Thyristors
o IEC 60747-7 Discrete semiconductor devices; Part 7: Bipolar transistors
o IEC 60747-7-5 Discrete semiconductor devices; Part 7: Bipolar transistors for power switching
applications
o IEC 60747-8 Discrete semiconductor devices; Part 8: Field-effect transistors
o IEC 60747-8-4 Discrete semiconductor devices; Part 8-4: Metal-oxide-semiconductor field-effect
o IEC 60747-12-1 Discrete semiconductor devices; Part 12-1: Optoelectronic devices - Blank detail
specification for light emitting infrared emitting diodes with/without pigtail for fibre optic systems and
sub-systems
o IEC 60747-12-3 Discrete semiconductor devices; Part 12-3: Optoelectronic Devices - Blank detail
IEC 60870-5-104 Network access for IEC 60870-5-101 using standard transport
profiles
o IEC 60870-6 Telecontrol protocols compatible with ISO and ITU-T recommendations
IEC 60884 Plugs and socket-outlets for household and similar purposes
Defines general requirements of such plugs and sockets. The many particular forms used in different
countries are listed in IEC/TR 60083 (formerly IECEE CEE-7).
IEC 60898-1 Electrical accessories. Circuit breakers for overcurrent protection for household and
similar installations. Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified)
IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
o IEC 60906-1: Plugs and socket-outlets 16 A 250 V AC
This is the system the IEC recommends as the worldwide standard for countries using 220-240 V
AC. Switzerland uses already a very similar plug.
o IEC 60906-2: Plugs and socket-outlets 15 A 125 V AC
This is the system used in the United States, Canada, and Japan.
o IEC 60906-3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, AC and DC
IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General
Requirements - Methods of Testing and Required Test Results
IEC 61000-62000
disturbances
o IEC-61000-2-5: Environment - Classification of electromagnetic environments. Basic EMC
publication
o IEC-61000-2-6: Environment - Assessment of the emission levels in the power supply of industrial
publication
o IEC 61000-2-10: Environment - Description of HEMP environment. Conducted disturbance
o IEC 61000-3-2: Limits - Limits for harmonic current emissions (equipment input current up to and
voltage supply systems, for equipment with rated current 16 A per phase and not subject to
conditional connection
o IEC 61000-3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply
systems
o IEC 61000-3-7: Limits - Assessment of emission limits for fluctuating loads in MV and HV power
systems
o IEC 61000-3-8: Limits - Guide to signalling on low-voltage electrical installations. Emission levels,
voltage supply systems. Equipment with rated voltage current 75 A and subject to conditional
connection
o IEC 61000-4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
o IEC 61000-4-2: Testing and measurement techniques - Electrostatic discharge immunity tests. Basic
EMC publication
o IEC 61000-4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic
by radio-frequency fields
o IEC 61000-4-7: Testing and measurement techniques - General guide on harmonics and
interharmonics measurements and instrumentation, for power supply systems and equipment
connected thereto
o IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity
EMC publication
o IEC 61000-4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity
publication
o IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including
test
o IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for
o IEC 61000-4-29: Testing and measurement techniques - Testing and measurement techniques.
Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
o IEC 61000-4-30: Testing and measurement techniques - Power quality measurement methods
o IEC 61000-5-1: Installation and mitigation guidelines - General considerations. Basic EMC
publication
o IEC 61000-5-2: Installation and mitigation guidelines - Earthing and cabling
o IEC 61000-5-5: Installation and mitigation guidelines - Specification of protective devices for HEMP
IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for
household and similar uses (RCBO's)
IEC 61010-1: Safety requirements for electrical equipment for measurement, control and laboratory
use, Part 1 general requirements.
o IEC 61010-2-010 Part 2-010: Particular requirements for laboratory equipment for the heating of
materials
o IEC 61010-2-020 Part 2-020: Particular requirements for laboratory centrifuges
o IEC 61010-2-032 Part 2-032: Particular requirements for hand-held and hand-manipulated current
service definition
o IEC 61158-4 Industrial communication networks - Fieldbus specifications - Part 4: Data-link layer
protocol specification
o IEC 61158-5 Industrial communication networks - Fieldbus specifications - Part 5: Application layer
service definition
o IEC 61158-6 Industrial communication networks - Fieldbus specifications - Part 6: Application layer
protocol specification
IEC 61280 Field testing method for measuring single mode fibre optic cable
IEC 61286 Character set with electrotechnical symbols (ISO-IR 181 [1])
IEC 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61346 Industrial systems, installations and equipment and industrial products Structuring
principles and reference designations
IEC 61355 Classification and designation of documents for plants, systems and equipment
o 61400-21: Measurement and assessment of power quality characteristics of grid connected wind
turbines
o 61400-23: Full-scale structural testing of rotor blades
o 61400-24: Lightning protection
o
IEC 61511 Functional safety - safety instrumented systems for the process industry sector
IEC 61537 Cable management - Cable tray systems and cable ladder systems
IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
IEC 61588 Precision clock synchronization protocol for networked measurement and control
systems
IEC 61643 Surge protective devices connected to low-voltage power distribution systems
o IEC 61966-2-1
o IEC 61966-2-4
IEC 61968 Application integration at electric utilities System interfaces for distribution management
IEC 61970 Application integration at electric utilities Energy management system application
program interface (EMS-API)
IEC 62000
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external
mechanical impacts (IK code)
IEC 62270 Hydroelectric power plant automation - Guide for computer-based control
circuit breakers
to and including 52 kV
o IEC 62271-203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above
IEC 62282-3-1 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
IEC 62282-3-2 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance
test methods
IEC 62282-3-3 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation
IEC 62282-5-1 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance
test methods
IEC 62351 Power System Control and Associated Communications - Data and Communication
Security
o IEC 62351-1: Data and Communication Security Introduction
DNP 3.0)
o IEC 62351-6: Data and Communication Security Security for IEC 61850 Profiles
o IEC 62351-7: Data and Communication Security Security Through Network and System
Management
IEC 62379-1: Common control interface for networked digital audio and video products-General
IEC 62443 Industrial communication networks - Network and system security (DRAFT)
o IEC 62443-1 Terminology, concepts and models
o IEC 62443-2 Establishing an industrial automation and control system security program
o IEC 62443-3 Operating a manufacturing and control systems security program
o IEC 62443-4 Specific security requirements for manufacturing and control systems
o IEC 62443-5 Security technologies for industrial automation and control systems
IEC 62464
o IEC 62464-1 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential