Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
constructive solutions
Properties
Form:
Colour:
Tack-free time:
Hardness Shore A:
Cure rate:
Swell ratio (volume):
Concrete pour:
Hydrostatic pressure
resistance:
Elastomeric
water-swellable
paste
Grey
Approximately 1 hour
(at 20C / 50% RH)
30
3 mm in 24 hours
200%
Allow between 2 to 8 hours
(see Application instructions)
Application instructions
Preparation
Remove all obvious loose debris and soil, moss and
organic growth from the substrate. Supercast SWX can be
applied to damp concrete but always ensure the surface is
free from running water and brush away any standing or
seeping water. Divert running channels away from area
before application.
Application
Cut conical tip off cartridge end-thread, screw on nozzle
and cut to required size. Place Supercast SWX into
sealant gun and apply like a conventional sealant. Extrude
a bead of not less than 15 mm diameter onto the
substrate, ensuring that there is no break in the bead.
Return to service
Durable:
Excellent
wet/dry
cycling
retaining
elastomeric character and swelling performance due to
high tolerance of the cementitious environment
Description
Technical support
Page 1
Supercast SWX
Limitations
Precautions
Additional Information
Fosroc manufactures a wide range of complementary
products which include :
Estimating
Packaging
Supercast SWX is supplied in 310 ml gun cartridges and
600ml sachets.
Coverage
Storage
Shelf life
9 months.
Fluid micro-concretes
Storage conditions
Store in original unopened cartridges and cartons in cool,
dry conditions.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/Supercast SWX/05/A