Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GBSS13.0
Issue
04
Date
2012-06-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
GSM BSS
Handover
Contents
Contents
GSM BSS ............................................................................................................................................i
Handover ............................................................................................................................................i
Feature Parameter Description ....................................................................................................i
Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved. .............................i
Trademarks and Permissions .......................................................................................................i
Notice ..................................................................................................................................................i
Contents .............................................................................................................................................i
1 Introduction ................................................................................................................................1-1
1.1 Scope ............................................................................................................................................ 1-1
1.2 Intended Audience ........................................................................................................................ 1-1
1.3 Change History.............................................................................................................................. 1-1
GSM BSS
Handover
Contents
Trigger Conditions for a Handover Due to High Load in the Underlaid Cell ..............3-14
3.4.8 Load Handover ................................................................................................................... 3-16
3.4.9 Enhanced Load Handover .................................................................................................. 3-21
Limitations ...................................................................................................................................3-34
3.5.2 TA Handover ....................................................................................................................... 3-34
ii
GSM BSS
Handover
Contents
Trigger Conditions for a Handover Due to High Load in the Underlaid Cell ..............3-38
3.5.7 Load Handover ................................................................................................................... 3-40
3.5.8 Edge Handover................................................................................................................... 3-40
3.5.9 Fast-Moving Micro Cell Handover ...................................................................................... 3-41
iii
GSM BSS
Handover
Contents
6 Engineering Guidelines...........................................................................................................6-1
6.1 When to Use Handover ................................................................................................................. 6-1
6.1.1 HUAWEI I Handover ............................................................................................................. 6-1
6.1.2 HUAWEI II Handover ............................................................................................................ 6-1
6.1.3 Direct Retry ........................................................................................................................... 6-1
6.1.4 SDCCH Handover ................................................................................................................ 6-1
6.1.5 Processing of Measurement Report ..................................................................................... 6-1
6.1.6 Pre-processing of Measurement Report .............................................................................. 6-1
6.1.7 Fast Move Handover ............................................................................................................ 6-1
6.1.8 Chain Cell Handover ............................................................................................................ 6-1
6.1.9 BTS power lift for handover .................................................................................................. 6-1
6.1.10 Dynamic HR/FR Adaptation................................................................................................ 6-1
6.1.11 AMR FR/HR Dynamic Adjustment ...................................................................................... 6-2
6.2 Information to Be Collected ........................................................................................................... 6-2
6.2.1 HUAWEI I Handover ............................................................................................................. 6-2
6.2.2 HUAWEI II Handover ............................................................................................................ 6-2
6.2.3 Direct Retry ........................................................................................................................... 6-2
6.2.4 SDCCH Handover ................................................................................................................ 6-2
6.2.5 Processing of Measurement Report ..................................................................................... 6-2
6.2.6 Pre-processing of Measurement Report .............................................................................. 6-2
6.2.7 Fast Move Handover ............................................................................................................ 6-2
6.2.8 Chain Cell Handover ............................................................................................................ 6-2
6.2.9 BTS power lift for handover .................................................................................................. 6-2
6.2.10 Dynamic HR/FR Adaptation................................................................................................ 6-3
6.2.11 AMR FR/HR Dynamic Adjustment ...................................................................................... 6-3
6.3 Network Planning .......................................................................................................................... 6-3
6.4 HUAWEI I Handover Feature Deployment .................................................................................... 6-3
6.5 HUAWEI II Handover Feature Deployment................................................................................... 6-3
6.6 Direct Retry Feature Deployment.................................................................................................. 6-3
6.7 Pre-processing of Measurement Report Feature Deployment ..................................................... 6-3
6.8 Fast Move Handover Feature Deployment ................................................................................... 6-3
6.9 Chain Cell Handover Feature Deployment ................................................................................... 6-3
6.10 Dynamic HR/FR Adaptation Feature Deployment ...................................................................... 6-3
6.11 AMR FR/HR Dynamic Feature Deployment ................................................................................ 6-4
7 Parameters .................................................................................................................................7-1
8 Counters ......................................................................................................................................8-1
9 Glossary ......................................................................................................................................9-1
10 Reference Documents .........................................................................................................10-1
[1]
3GPP TS 08.58 Base Station Controller - Base Transceiver
Station (BCS-BTS) Interface Layer 3 Specification ...........................................................10-1
Issue 04 (2012-06-30)
iv
GSM BSS
Handover
Issue 04 (2012-06-30)
Contents
GSM BSS
Handover
1 Introduction
1 Introduction
1.1 Scope
This document describes the overall procedure of Huawei handover algorithms and the specific
handover decisions.
Feature change: refers to a change in the Handover feature of a specific product version.
Editorial change: refers to a change in wording or the addition of the information that was not
described in the earlier version.
Document Issues
The document issues are as follows:
04 (2012-06-30)
03 (2011-10-30)
02 (2011-07-15)
01 (2011-03-31)
Draft A (2011-01-15)
04 (2012-06-30)
This is the fourth official release of GBSS13.0.
Compared with issue 03 (2011-10-30), issue 04 (2012-06-30) incorporates the changes described in the
following table.
Change
Type
Change Description
Parameter Change
Feature
change
None
None
Editorial
change
Issue 04 (2012-06-30)
None
1-1
GSM BSS
Handover
Change
Type
1 Introduction
Change Description
Parameter Change
- 4 "Related Features"
- 5 "Impact on the Network"
- 6 "Engineering Guidelines"
03 (2011-10-30)
This is the third official release of GBSS13.0
Compared with issue 02 (2011-07-15), issue 03 (2011-10-30) incorporates the changes described in the
following table.
Change
Type
Change Description
Parameter Change
Feature
change
None
None
Editorial
change
02 (2011-07-15)
This is the second official release of GBSS13.0.
Compared with issue 01 (2011-03-31), issue 02 (2011-07-15) incorporates the changes described in the
following table.
Issue 04 (2012-06-30)
1-2
GSM BSS
Handover
1 Introduction
Change
Type
Change Description
Parameter Change
Feature
change
EDOUTHOOFFSET
Editorial
change
None
EDOUTHOADEN
NCELLPUNEN
NCELLPUNTM
NCELLPUNLEV
NCELLPUNSTPTH
None
01 (2011-03-31)
This is the first official release of GBSS13.0.
Compared with issue Draft A (2011-01-15), issue 01 (2011-03-31) incorporates no change.
Draft A (2011-01-15)
This is the draft release of GBSS13.0.
Issue 04 (2012-06-30)
1-3
GSM BSS
Handover
2 Overview
2 Overview
The GSM network comprises multiple cells with continuous coverage. The handover technique is
introduced into the GSM system to enable the users who are in motion to continue with the current call
without interruption, optimizing the network performance.
During a handover, the MS and BTS in service measure the conditions of uplink and downlink radio links
respectively, record the measurement results into measurement reports (MRs), and then send the MRs
to the BSC. The BSC determines whether to trigger a handover based on the MRs and the actual
conditions of the radio network.
Huawei handover algorithms (handover algorithm I and handover algorithm II) involve measurement and
MR reporting, MR processing, handover decision, and handover execution.
Huawei handover algorithms apply to the handovers on TCHs as well as the handovers on SDCCHs.
Start
MS in connection state
MS performs measurement
and MR reporting
BSS performs MR processing
Handover decision based on
handover algorithm
Handover execution
End
Issue 04 (2012-06-30)
2-1
GSM BSS
Handover
2 Overview
Start
No downlink measurement report
handover decision
MS starts minimum interval
protection
Whether minimum interval
protection of consecutive
handovers times out?
No
Yes
Handover preprocessing
Handover penalty
Basic queuing
Network characteristics adjustment
Forced handover
Quick handover
No
Issue 04 (2012-06-30)
2-2
GSM BSS
Handover
2 Overview
Quick handover (including quick PBGT handover and frequency offset handover). Good and stable
services can be provided when the voice quality deteriorates during the fast movement of an MS.
Quick handover is mainly applicable in the railway scenario.
Emergency handover. An emergency handover can ensure the call continuity when the radio condition
severely deteriorates. Theoretically, an emergency handover has a bigger deviation than other
handovers in terms of the selection of the target cell. In a normal cell, frequent emergency handovers
should be avoided.
Enhanced dual-band network handover. In an enhanced dual-band network, the resources in the
overlaid (OL) DCS1800 cell and underlaid (UL) GSM900 cell can be shared during the assignment
and handover procedures. That is, the calls in the high-traffic GSM900 cell can be handed over to the
low-traffic DCS1800 cell to balance traffic.
Load handover. Load handover enables the system load to be balanced among multiple cells so that
the system performance can be ensured.
Figure 2-3 shows the handovers provided in Figure 2-2 and their priorities in handover algorithm I.
Issue 04 (2012-06-30)
2-3
GSM BSS
Handover
2 Overview
Emergency handover
TA handover
Interference handover
Rapid level drop handover
BQ handover
Starts protection timer after
emergency handover is
triggered.
Enhanced dual-band
network handover
Load handover
Normal handover
Edge handover
Fast-moving micro cell
handover
Inter-layer handover
PBGT handover
Concentric cell handover
AMR handover
3G better cell handover
TIGHT BCCH handover
Issue 04 (2012-06-30)
2-4
GSM BSS
Handover
2 Overview
No
Yes
Handover preprocessing
Basic queuing
Network characteristics adjustment
(some factors)
Forced handover
Handover penalty
Quick handover (emergency
handover)
No
Issue 04 (2012-06-30)
2-5
GSM BSS
Handover
2 Overview
In handover algorithm II, three types of handover decisions are defined, as shown in Figure 2-5.
Figure 2-5 Handover decisions based on handover algorithm II
Emergency handover
Quick handover
Intra-cell handover
Interference handover
TA handover
BQ handover
AMR handover
Edge handover
Inter-cell handover
Fast-moving micro cell
handover
Enhanced dual-band
network handover
Better cell handover
3G better cell handover
Handover Execution
The BTS power lift for handover function determines whether the BTS of the serving cell transmits
signals at the maximum power during a handover. The BSC maximizes the transmit power of the BTS
before sending a handover command to the MS. The BSC maintains the BTS power during the
handover to ensure the success of the handover. (GBFD-117101 BTS power lift for handover)
DIRMAGANSITEFLAG is set to YES. That is, a repeater is configured for the source cell or target cell.
FRAMEOFFSET is set to a value other than 0 or 255. That is, frame offset is configured for the source
cell or target cell.
Issue 04 (2012-06-30)
2-6
GSM BSS
Handover
3 Technical Description
3 Technical Description
3.1 Measurement Report Processing
This section describes the features GBFD-110801 Processing of Measurement Report and
GBFD-110802 Pre-processing of Measurement Report.
Measurement report processing involves measurement report interpolation and filtering.
If BTSMESRPTPREPROC is set to Yes, the processing is performed on the BTS side. By setting the
parameters PRIMMESPPT, BSMSPWRLEV, and MRPREPROCFREQ, you can specify the contents
of the MRs to be provided and the period during which the MRs are provided. This decreases the
signaling traffic on the Abis interface and the traffic volume processed by the BSC.
If MRs are issued continuously, they are directly added to the MR list.
If MRs are not issued continuously and the number of lost MRs is smaller than the value of
MRMISSCOUNT, the system performs operations as follows:
For
the serving cell, the handover algorithm I performs the linear interpolation for the MRs. The
lowest values are applied to the interpolation of MRs by the handover algorithm II according to the
protocols; that is, level 0 (110 dBm) and quality 7 are applied in the interpolation.
For
the neighboring cell, the lowest value is applied to the lost level value according to the protocols;
that is, level 0 (110 dBm) is applied in the interpolation.
If no MR is reported because the receive level in the neighboring cell is too low, level 0 (110 dBm) is applied in the
interpolation.
If MRs are not issued continuously and the number of lost MRs is greater than the value of
MRMISSCOUNT, the previous MRs are discarded. When new MRs are issued, calculation is done
again.
Issue 04 (2012-06-30)
3-1
GSM BSS
Handover
3 Technical Description
that of all BCCH TRXs of the neighboring cell, there is no mapping between them. In situations where
the cells overlap severely, the handover is easily triggered, causing the ping-pong handover. After the
power control compensation is performed, the receive level of the serving cell can reflect the coverage
condition of the BCCH TRX of the serving cell. The power control compensation of the serving cell is
performed after the interpolation processing and before the filtering processing. In general, the
compensation of power control is calculated by adding the downlink receive level of the serving cell and
twice the current downlink transmit POWL of the BTS.
The number of consecutive MRs required for filtering is determined by the measurement object and
channel type. See Table 3-1 for details.
Table 3-1 Parameters related to the number of MRs
Measurement Object
Channel Type
Parameter
SDCCH
NSIGSTRFLTLEN
TCH
SSLENSD
SDCCH
QLENSI
TCH
DATAQUAFLTLEN
TCH
TAFLTLEN
SDCCH
TASIGSTRFLTLEN
BCCH
NCELLFLTLEN
SDCCH
NSIGSTRFLTLEN
TCH
DATASTRFLTLEN
RQI
TCH
QLENSD
If consecutive MRs are insufficient, the filtering fails. The handover decision is not performed.
After a quick handover, TA handover, BQ handover, or load handover (in handover algorithm II) is
successfully performed, the penalty level is subtracted from the actual receive level of the original cell
during the penalty period. Table 3-2 lists the parameters related to handover penalty.
Issue 04 (2012-06-30)
3-2
GSM BSS
Handover
3 Technical Description
Parameter
Quick handover
TIMEPUNISH
HOPUNISHVALUE
TA Handover
SSTAPUNISH
TIMETAPUNISH
BQ Handover
SSBQPUNISH
TIMEBQPUNISH
LOADHOPENTIME
LOADHOPENVALUE
After a fast-moving micro cell handover is successfully performed, penalty is performed on all the
neighboring cells of the micro cell. Related parameters are SDPUNVAL and SPEEDPUNISHT.
If an MS fails to initiate an intra-cell adaptive multirate (AMR) TCHF to TCHH handover, it cannot
initiate another intra-cell AMR TCHF to TCHH handover within TIMEAMRFHPUNISH.
In handover algorithm II, after the interference handover is initiated, this handover is not allowed to be
initiated again within INTERFEREHOPENTIME regardless of whether the handover is successful or
not.
After an OL subcell to UL subcell handover within an enhanced concentric cell is successful, the
handover from UL subcell to OL subcell is not allowed within UTOOHOPENTIME.
After an OL cell to UL cell handover in the enhanced dual-band network is successful, the handover
from UL cell to OL cell is not allowed within HOPENALTYTIME.
After a handover fails, different penalties are performed on the target cell based on the causes:
If
a handover to a neighboring 2G or 3G cell fails, the actual receive level of the target cell is
subtracted by FAILSIGSTRPUNISH for neighboring cell ranking during the penalty.
Based on the handover failure cause, the penalty time could be UMPENALTYTIMER, RSCPENALTYTIMER, or
PENALTYTIMER.
If
an OL subcell to UL subcell handover within a concentric cell fails, the handover from OL subcell to
UL subcell is not allowed within TIMEOTOUFAILPUN.
If
a UL subcell to OL subcell handover within a concentric cell fails, the handover from UL subcell to
OL subcell is not allowed within TIMEUTOOFAILPUN.
Basic Ranking
Basic ranking is performed after handover penalty to generate a candidate cell list in descending order
taking the following information into account: receive levels of the serving cell and neighboring cells
carried in the MRs, hysteresis, usage of TCHs in the neighboring cells, and so on.
In the case of non-directed retry, if an MS in an external BSC cell occupies an SDCCH and
INRBSCSDHOEN is set to No, this cell should be removed from the candidate cell list. In other words,
the handover to this external BSC cell is prohibited.
If a neighboring 2G cell and the serving cell are controlled by the same BSC and the TCH usage of the
neighboring cell is 100%, the neighboring cell should be removed from the candidate cell list; that is,
the handover to this neighboring cell is prohibited.
Issue 04 (2012-06-30)
3-3
GSM BSS
Handover
3 Technical Description
If the downlink receive level of a neighboring 2G cell is smaller than the sum of HOCDCMINDWPWR
and MINOFFSET, the neighboring cell should be removed from the candidate cell list; that is, the
handover to this neighboring cell is prohibited.
If the uplink receive level of a neighboring 2G cell is smaller than the sum of HOCDCMINUPPWR and
MINOFFSET, the neighboring cell should be removed from the candidate cell list; that is, the handover
to this neighboring cell is prohibited.
If a neighboring 3G cell is a frequency division duplex (FDD) cell, the cell is processed according to
FDDREP:
If
FDDREP is set to Ec/N0, and the Ec/No of a neighboring cell is smaller than MINECNOTHRES,
the neighboring cell should be removed from the candidate cell list; that is, the handover to this
neighboring cell is prohibited.
If
FDDREP is set to RSCP, and the received signal code power (RSCP) of a neighboring cell is
smaller than MINRSCPTHRES, the neighboring cell should be removed from the candidate cell list;
that is, the handover to this neighboring cell is prohibited.
If a neighboring 3G cell is a time division duplex (TDD) cell and the RSCP after penalty is smaller than
the MINRSCPTHRES, the neighboring cell should be removed from the candidate cell list; that is, the
handover to this neighboring cell is prohibited.
Calculate the difference between the downlink receive level of the neighboring cells and the downlink
receive level of the serving cell. Based on the difference, rank the neighboring cells in descending
order.
Whether the serving cell and a neighboring cell share the same BSC or MSC
Load in a cell
After performing basic ranking on all candidate cells based on their priorities, the BSC ranks these cells
again to determine their comprehensive priorities.
After network characteristics adjustment, the BSC generates a final candidate cell list (including the
serving cell and neighboring cells). The candidate cells are ranked based on their priorities from high to
low. Then, the BSC starts the handover decision procedure.
In handover algorithm II, the emergency handover decision is made before network characteristics
adjustment and forced handover and after handover penalty (except load handover penalty) and basic
ranking. Load handover penalty is performed before network characteristics adjustment and after an
emergency handover. After the emergency handover decision, LOADHOPENVALUE is subtracted from
the signal level of the original cell within the time specified by LOADHOPENTIME if the load handover is
successful. After load handover penalty, the signal level of the target cell changes. Therefore, the
network characteristics need to be readjusted.
In handover algorithm 1, all handover decisions are made after handover penalty, basic ranking, and
network characteristics adjustment.
Issue 04 (2012-06-30)
3-4
GSM BSS
Handover
3 Technical Description
If no TCH is available in the serving cell which the MS attempts to access and DIRECTRYEN is set to
Yes, the BSC triggers a directed retry procedure.
When a BTS is under maintenance, the MSs served by the BTS should be handed over to the cells
controlled by a functional BTS. This ensures that no call drop occurs during the BTS maintenance.
Directed Retry
When the MS initiates a call, after the BSC receives an ASSIGN REQ message from the MSC, the BSC
determines an assignment mode based on the load of the serving cell.
Assignment mode is categorized into normal assignment procedure, mode modification procedure, and directed retry
procedure. The commands issued by the BSC vary according to the procedure.
For a normal assignment procedure, the BSC activates a channel and issues a channel assignment command.
For a mode modification procedure, the BSC issues a mode modification command.
For a directed retry procedure, the BSC issues a handover command.
If the serving cell is so overloaded that new calls cannot be admitted or admitting new calls will affect
ongoing services, the BSC triggers a directed retry procedure. By using the directed retry, the MS is
handed over to the target cell and part of the traffic in the serving cell is distributed to the target cell. This
avoids traffic congestion in the serving cell. (GBFD-110607 Directed Retry)
Figure 3-1 shows the procedure for a directed retry decision.
Issue 04 (2012-06-30)
3-5
GSM BSS
Handover
3 Technical Description
When ASSLOADJUDGEEN is set to OFF, the BSC triggers a directed retry procedure after completing
basic ranking if the load of the serving cell exceeds 100%.
Issue 04 (2012-06-30)
3-6
GSM BSS
Handover
3 Technical Description
As shown in Figure 3-1, directed retry is categorized into enhanced dual-band network directed retry and
normal directed retry.
In handover algorithm II, serving cell level < receive level of neighboring cells < serving cell level +
DRHOLEVRANGE.
If DRTAGCELLSEL is set to YES, the MS can be handed over to one of multiple candidate cells by
using directed retry. If DRTAGCELLSEL is set to NO, the MS can be handed over to only one target cell.
The number of available candidate cells is controlled by HOTRYCNT.
If the trigger conditions for an emergency handover are met and there is at least one candidate cell, the
emergency handover timer NEWURGHOMININTV is started. Another emergency handover decision
can be performed only when NEWURGHOMININTV times out.
Issue 04 (2012-06-30)
3-7
GSM BSS
Handover
3 Technical Description
Trigger Conditions
During handover decision, it is first determined whether the trigger conditions for a frequency offset
handover are met. When the BTS cannot send the frequency offset information or the reported
frequency offset information is invalid, quick PBGT handover is triggered, provided that other conditions
for a frequency offset handover are met.
If QUICKHOEN is set to Yes, the trigger conditions for a quick handover are as follows:
The MS is moving away from the serving cell (the frequency offset in the measurement result is a
negative value) and the moving speed of the MS is greater than MOVESPEEDTHRES.
The filtered uplink level of the serving cell is smaller than HOUPTRIGE.
The compensated downlink level of the serving cell is smaller than HODOWNTRIGE.
The path loss of configured chain neighboring cells is smaller than the specified threshold of the path
loss of the serving cell.
If the last three conditions are met simultaneously, the decision is made as follows:
If
Issue 04 (2012-06-30)
3-8
GSM BSS
Handover
If
3 Technical Description
If all the last three conditions are not met, quick handover is not triggered.
Limitations
The limitations on quick handover are as follows:
The candidate cells for quick handover must be chain neighboring cells of the serving cell.
After a quick handover is successful, the penalty is performed on the original cell during the penalty
time to prevent an immediate handover back to the original cell. The penalty time and penalty value
are specified by TIMEPUNISH and HOPUNISHVALUE respectively.
3.4.2 TA Handover
TA handover is a type of emergency handover. The TA handover decision is made according to the TA
value reported by the MS.
The TA value of a normal cell ranges from 0 to 63 and that of an extended cell ranges from 0 to 229. The
TA can be stepped up or down in steps of 553.5 m. The TA value of 63 corresponds to a distance of 35
km.
Trigger Conditions
TA handover is triggered when the following conditions are met:
The TA handover can be triggered only when the preceding two conditions are met simultaneously.
From the perspective of the trigger conditions for a TA handover, TA can be regarded as a limitation to the size of a cell.
If TALIMIT of a co-site neighboring cell is smaller than or equal to the TALIMIT of the serving cell, a
handover to the neighboring cell is prohibited.
If the trigger conditions for a TA handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
Issue 04 (2012-06-30)
3-9
GSM BSS
Handover
3 Technical Description
Limitations
After the TA handover is successful, the penalty is performed on the original cell. During
TIMETAPUNISH, SSTAPUNISH is subtracted from the level of the original cell to prevent an immediate
handover back to the original cell.
3.4.3 BQ Handover
BQ handover is a type of emergency handover in which the system makes the decision based on the
uplink/downlink receive quality on the Um interface.
The receive quality is measured in bit error rate (BER). The BSC measures the quality of a radio link
based on the quality band in the MR. The probable cause of an increase in BER is that the signal power
is too low or the channel interference increases.
Trigger Conditions
If BQHOEN is set to Yes, the trigger conditions for a BQ handover are as follows:
The uplink receive quality is greater than or equal to the uplink receive quality threshold of the serving
cell.
The downlink receive quality is greater than or equal to the downlink receive quality threshold of the
serving cell.
For non-AMR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMIT
and the parameter for specifying the downlink receive quality threshold is DLQUALIMIT.
For AMR FR calls, the parameter for specifying the uplink receive quality threshold is
ULQUALIMITAMRFR and the parameter for specifying the downlink receive quality threshold is
DLQUALIMITAMRFR.
For AMR HR calls, the parameter for specifying the uplink receive quality threshold is
ULQUALIMITAMRHR and the parameter for specifying the downlink receive quality threshold is
DLQUALIMITAMRHR.
If the target cell is a neighboring cell, the receive level of the target cell must meet the following
condition:
Filtered downlink receive level of the target cell > Filtered downlink receive level of the serving cell
after compensation + (INTERCELLHYST of the serving cell configured for the neighboring cell - 64) (BQMARGIN - 64)
In handover algorithm I, if there is only one cell in the candidate cell list and the cell is a neighboring cell, the preceding
condition does not need to be met.
Issue 04 (2012-06-30)
3-10
GSM BSS
Handover
3 Technical Description
In handover algorithm I, if there is no neighboring cell, INTRACELLHOEN is set to Yes, and the
serving cell is not in the intra-cell handover penalty state, the MS is handed over to the serving cell. A
channel with different frequency band, different frequency, different TRX, or different timeslot is
preferred (priority: different frequency band > different frequency > different TRX > different timeslot).
If the trigger conditions for a BQ handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
Limitations
After the BQ handover is successful, the penalty is performed on the original cell. During
TIMEBQPUNISH, SSBQPUNISH is subtracted from the level of the original cell to prevent an immediate
handover back to the original cell.
Trigger Conditions
If RXQCKFALLHOEN is set to Yes, the trigger conditions for a rapid level drop handover are as follows:
The target cell has a higher priority than the serving cell.
If the trigger conditions for a rapid level drop handover are met but the candidate 2G cells are not
suitable, the following operations are performed:
Issue 04 (2012-06-30)
3-11
GSM BSS
Handover
3 Technical Description
Trigger Conditions
If INTERFHOEN is set to Yes, the trigger conditions for an interference handover are as follows:
The filtered value of uplink receive quality is greater than or equal to the specified receive quality
threshold at the current uplink receive level.
The filtered value of downlink receive quality is greater than or equal to the specified receive quality
threshold at the current downlink receive level.
For non-AMR FR calls, the parameter for specifying the receive quality threshold is RXQUALn, where
1 n 12.
For AMR FR calls, the parameters for specifying the receive quality threshold are RXQUALn (1 n
12) and RXLEVOFF.
If
If
If INTRACELLHOEN is set to Yes and the intra-cell handover penalty timer expires, the serving cell
can be selected as the target cell.
When a number of consecutive intra-cell handovers occur, BANTIME is triggered and the intra-cell handover is prohibited
in the corresponding period.
If the filtered level of a neighboring cell after handover penalty HOTHRES of the neighboring cell +
INTELEVHOHYST - 64, this neighboring cell can serve as the target cell.
If the trigger conditions for an interference handover are met but the candidate 2G cells are not suitable,
the following operations need to be performed:
Issue 04 (2012-06-30)
3-12
GSM BSS
Handover
3 Technical Description
NOTE
In Figure 3-2, "A" indicates the receive quality threshold under the current uplink or downlink signal level.
For AMR FR calls, "A" equals RXQUAL1 or the sum of a value from RXQUAL2 to RXQUAL12 and RXLEVOFF.
Trigger Conditions
In handover algorithm I, the trigger conditions for a handover due to no downlink measurement report
are as follows:
Issue 04 (2012-06-30)
3-13
GSM BSS
Handover
3 Technical Description
For TCH, the number of saved MRs with uplink quality value is greater than DATAQUAFLTLEN; for
SDCCH, the number of saved MRs with uplink quality value is greater than QLENSI.
In addition, the BSC triggers a handover due to no downlink measurement report when MRs of the
serving cell keep lost for NODLMRHOLASTTIME within NODLMRHOSTATTIME.
The ranked neighboring cells recorded in the last complete MR are saved as candidate cells.
If no neighboring cell is available, the serving cell is selected as the target cell.
Trigger Conditions for a Handover Due to High Load in the Underlaid Cell
The trigger conditions for a handover due to high load in the UL cell are as follows:
The two cells are in the enhanced dual-band network and OUTLOADHOENABLE is set to Yes.
The handover due to high load in the UL cell is performed only on TCHs.
The current call is within the handover margin, and the INTOINNREXLEVTHRED plus the handover
margin is greater than or equal to the receive level, which is also greater than or equal to the
INTOINNREXLEVTHRED.
When all the preceding conditions are met, the handover due to high load in the UL cell is triggered.
If the load of the UL subcell in the cell is greater than or equal to OUTSERIOVERLDTHRED, the
handover margin is adjusted in a period of OUTLOADHOPERIOD subtracted by
OUTLOADHOMODPERI. The step length for handover margin adjustment is specified by
OUTLOADHOSTEP.
Trigger Conditions for a Handover Due to Low Load in the Underlaid Cell
The trigger conditions for a handover due to low load in the UL cell are as follows:
Issue 04 (2012-06-30)
3-14
GSM BSS
Handover
3 Technical Description
The current call is within the handover margin and the receive level is greater than or equal to
OUTINNREXLEVTHRED.
When all the preceding conditions are met, the handover due to low load in the UL cell is triggered.
If the load of the UL subcell in the cell is smaller than OUTLOWLOADTHRED for a specified period, the
handover margin is adjusted in a period of INNLOADHOPERI. The step length for handover margin
adjustment is specified by INNLOADHOSTEP.
specifies the filtering compensated downlink receive level in the serving cell.
Thdouter:
specifies OUTINNREXLEVTHRED.
SS(u):
specifies the downlink level (power compensation is performed on the downlink level based on
the measurement) of the UL subcell where the call is originated. If the SS(u) value cannot be
obtained, the decision of enhanced dual-band network handover is not performed and the decision
condition is met by default.
SS(n):
The best neighboring cell is the one whose measured BCCH level is the highest among
neighboring cells. SS(n) is the signal level of the best neighboring cell that works on the same
frequency band, locates at the same layer, and has the same priority as the UL cell but is not co-sited
with the UL cell. If such a neighboring cell is not available, the value of SS(n) is -110 dBm.
ATCB_THRD:
specifies ATCBTHRED.
ATCB_HYST:
specifies ATCBHYST.
Handover due to MS movement to the border of the OL cell is triggered if either of the preceding
conditions is met.
In the Adapter distance To Cell Border (ATCB) handover algorithm, the border between the OL and UL subcells is
determined according to the signal strength of the serving cell and that of neighboring cells. If SS(s) = SS(n), the system
considers that the MS is located at the border of the UL cell. If SS(s) - SS(n) > ATCB_THRD, the system considers that
the MS is located in the coverage area of the OL subcell. The coverage area of the OL subcell is determined according
to different networking and coverage conditions of the existing network. In addition, the OL subcell of the serving cell
and the OL subcell of the neighboring cells will not overlap regardless of the distance between BTSs.
The handover margin specifies the range of signal level. In the case of OL/UL load handover on the enhanced
dual-band network, the MSs whose downlink levels are within the handover margin are handed over level by level.
For the handover due to high load in the UL cell, the MS must be handed over to the OL cell.
For the handover due to low load in the UL cell, the MS must be handed over to the UL cell.
For the handover due to MS movement to the border of the OL cell, the MS is handed over to the
neighboring cell that ranks first among neighboring cells. The MS should not be handed over to the cell
that ranks after the serving cell. Generally, the target cell is the UL cell. The target cell can also be
another neighboring cell.
Issue 04 (2012-06-30)
3-15
GSM BSS
Handover
3 Technical Description
Limitations
The limitations on the handover due to high load in the UL cell are as follows:
If the cell where the call is located is on an enhanced dual-band network, CELLINEXTP is set to
Extra(Extra).
The maximum range of the handover margin is from 63 to INTOINNREXLEVTHRED. The MS with the
highest receive level is handed over first.
The limitations on the handover due to low load in the UL cell are as follows:
If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to
Inner(Inner).
The maximum range of the handover margin is from 63 to OUTINNREXLEVTHRED. The MS with the
lowest receive level is handed over first.
The limitations on the handover due to MS movement to the border of the OL cell are as follows:
If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to
Inner(Inner).
On the enhanced dual-band network, the MS should not be handed over to a cell in the same UL/OL
cell group when the load handovers between the OL cell and the UL cell (specified by
OUTLOADHOENABLE and INNLOADHOEN) are allowed. This is to prevent a load handover of a
normal cell from colliding with a load handover between the OL cell and the UL cell on the network.
The PBGT handover algorithm may cause inter-cell handovers. Therefore, to avoid ping-pong
handovers, PBGT handovers are restricted in either of the following conditions:
When
INNLOADHOEN is set to YES(Yes), PBGT handovers from the underlaid subcell to the
overlaid subcell are prohibited.
When
OUTLOADHOENABLE is set to YES(Yes), PBGT handovers from the overlaid subcell to the
underlaid subcell are prohibited.
Issue 04 (2012-06-30)
3-16
GSM BSS
Handover
3 Technical Description
A cell with
a light load
A cell with
a heavy load
A cell with
a light load
A cell with
a heavy load
A cell with
a light load
To perform load sharing, increase DLEDGETHRES so that the load at the border of a cell is switched to
a neighboring cell with light load.
Whether a cell carries heavy load or light load is determined by the traffic volume in the cell, that is
whether the traffic volume (generally TCH usage) in the cell exceeds the preset threshold.
The TCH usage is calculated using the following formula:
TCH usage = (Number of occupied TCHFs x 2 + Number of occupied TCHHs)/(Number of available
TCHFs x 2 + Number of available TCHHs)
where
Number of available TCHHs is the sum of idle and occupied TCHHs.
Number of available TCHFs is the sum of idle and occupied TCHFs.
If the traffic volume in a cell is greater than TRIGTHRES, the load in this cell is heavy. The load
handover algorithm needs to be enabled.
If the traffic volume in a cell is smaller than LoadAccThres, the load in this cell is light and the cell can
receive load from the heavy-load cells.
Load handover may lead to many handovers. Therefore, the load of the system CPU should be
considered before load handover is performed. In other words, the system traffic volume should be taken
into account. In addition, to prevent too many MSs from being handed over at a time, load handover is
performed step by step. In other words, the edge handover threshold is increased on the basis of
LOADHOSTEP (CLS_Ramp) and LOADHOPERIOD (CLS_Period). When the increase in the edge
handover threshold equals LOADOFFSET (CLS_Offset), the edge handover threshold is not increased
any more. See Figure 3-4 for details.
Issue 04 (2012-06-30)
3-17
GSM BSS
Handover
3 Technical Description
Cell A
CONF_HO_RXLEV+CLS_Offset
Cell B
CONF_HO_RXLEV
CONF_HO_RXLEV+CLS_Ramp
Trigger Conditions
If LoadHoEn is set to Yes, the trigger conditions for a load handover are as follows:
The current load of the serving cell is greater than or equal to TRIGTHRES.
If the target cell and the serving cell are in the same BSC, a load handover is performed when the
current load of the target cell is smaller than LoadAccThres.
If the target cell and the serving cell are not in the same BSC, a load handover is performed when the
load of the target cell is smaller than LoadAccThres and OutBscLoadHoEn is set to Yes.
Issue 04 (2012-06-30)
3-18
GSM BSS
Handover
3 Technical Description
Issue 04 (2012-06-30)
3-19
GSM BSS
Handover
Issue 04 (2012-06-30)
3 Technical Description
3-20
GSM BSS
Handover
3 Technical Description
Examples
The system assigns MSs to different load handover margins based on the downlink receive level. The
load handover algorithm is used to hand over the MSs out of a cell step by step.
1. The MSs in load handover margin 1 are handed over to the neighboring cells. Load handover margin
1 specifies the area where the downlink level ranges from DLEDGETHRES to the sum of
DLEDGETHRES and LOADHOSTEP.
2. After a LOADHOPERIOD elapses, the MSs in load handover margin 2 are handed over to the
neighboring cells. The load handover margin 2 specifies the area where the downlink level ranges
from DLEDGETHRES to the sum of DLEDGETHRES and (2 x LOADHOSTEP).
3. The load handover stops when the traffic volume in the cell is less than or equal to TRIGTHRES.
The load handover is performed step by step to prevent call drops caused by a sudden increase in CPU
load or the congestion in the target cell.
Issue 04 (2012-06-30)
3-21
GSM BSS
Handover
3 Technical Description
The value of LOADHOPBGTMARGIN is not 0 and the path loss in the serving cell minus that in the
target cell is larger than LOADHOPBGTMARGIN.
The receive level of the target cell is greater than HOTHRES of the target cell plus INTELEVHOHYST
of the handover from the serving cell to the target cell.
Of all the MSs that are within the range specified by LOADHOUSRRATIO and meet the preceding
conditions, only one MS can initiate the handover at a time. This regulation prevents too many MSs
from being handed over to the target cell at one time and avoids congestion in the target cell.
Trigger Conditions
If FRINGEHOEN is set to Yes and EDOUTHOADEN is set to No, the trigger conditions for an edge
handover are as follows:
filtered downlink receive level of the serving cell after compensation is smaller than
DLEDGETHRES.
The
filtered uplink receive level of the serving cell after compensation is smaller than
ULEDGETHRES.
Receive level of a neighboring cell > Receive level of the serving cell + (INTERCELLHYST 64)
An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are
met for EDGELAST1 within EDGESTAT1.
If both FRINGEHOEN and EDOUTHOADEN are set to Yes, the trigger conditions for an edge handover
are as follows:
Filtered downlink receive level of the serving cell after compensation < DLEDGETHRES +
(EDOUTHOOFFSET 64)
Filtered uplink receive level of the serving cell after compensation < ULEDGETHRES +
(EDOUTHOOFFSET 64)
Receive level of a neighboring cell > Receive level of the serving cell + (INTERCELLHYST 64)
An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are
met for EDGELAST1 within EDGESTAT1.
Issue 04 (2012-06-30)
3-22
GSM BSS
Handover
3 Technical Description
Cell 2
-97 dBm
-85 dBm
After cells are ranked, the target cell must have a higher priority than the serving cell.
A cell becomes the target cell if the previous conditions are met for EDGEADJLASTTIME within
EDGEADJSTATTIME.
If the trigger conditions for an edge handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
Time penalty is performed on the micro cell to prevent an MS that is moving fast in a macro cell from
entering a micro cell. This ensures that the fast-moving MS camps on the macro cell.
Issue 04 (2012-06-30)
3-23
GSM BSS
Handover
3 Technical Description
Umbrella cell
Micro cell
Trigger Conditions
If QCKMVHOEN is set to Yes, the handover decision procedure of fast-moving micro cell handover is as
follows:
1. When the trigger conditions for an edge handover or PBGT handover are met, the fast-moving micro
cell handover decision is started.
2. When the period during which the MS camps on the serving cell is shorter than QCKTIMETH, the
number of cells through which the fast-moving MS passes is incremented by one.
The cells counted by the system must locate at a layer lower than layer 4. In other words, it must be a non-Umbrella cell.
3. When the number of cells that the MS passes in fast movement reaches QCKSTATCNT, the
fast-moving micro cell handover is triggered if the number of cells that the MS passes in fast
movement counted by the system is greater than or equal to QCKTRUECNT.
Limitations
After the fast-moving micro cell handover is successful, the penalty is performed on all the neighboring
micro cells. During SPEEDPUNISHT, SDPUNVAL is subtracted from the receive level of every
neighboring micro cell.
Issue 04 (2012-06-30)
3-24
GSM BSS
Handover
3 Technical Description
Umbrella Cell
GSM900
GSM900
GSM900
Macro Cell
Layer 3
DCS1800
DCS1800
DCS1800
Micro Cell
Layer 2
GSM900
DCS1800
GSM900
GSM900
GSM900
DCS1800
DCS1800
DCS1800
Pico Cell
Layer 1
In Huawei multiband handover algorithm, a GSM network covering a certain area is divided into four
layers, which are:
Layer 4: Umbrella cell. The umbrella cells are generally GSM900 cells having the wide coverage
feature. It also implements fast MS connection.
Layer 3: Macro cell. The macro cells are generally GSM900 cells, which are commonly used in current
GSM system and serve majority of subscribers.
Layer 2: Micro cell. The micro cells are generally DCS1800 cells having the small coverage feature.
They enable capacity expansion.
Layer 1: Pico cell. The Pico cells are generally DCS1800 cells, which are used in hot spots and blind
spots.
Trigger Conditions
If LEVHOEN is set to Yes, the trigger conditions for an inter-layer handover are as follows:
The layer at which the target cell is located has a higher priority than the layer at which the serving cell
is located.
Issue 04 (2012-06-30)
3-25
GSM BSS
Handover
3 Technical Description
After cells are ranked, the target cell must have a higher priority than the serving cell.
The inter-layer handover is triggered when the P/N criterion is met, that is, the previous conditions are
met for LEVLAST within LEVSTAT.
If NCELLPUNEN is set to No for the target cell, an inter-layer handover is triggered when the previous
conditions are met.
If NCELLPUNEN is set to Yes for the target cell, the timer NCELLPUNTM is started when the previous
conditions are met. After the timer is started, the value of NCELLPUNLEV is subtracted from the filtered
receive level of the target cell. If the timer expires, an inter-layer handover is triggered. If the timer stops,
no inter-layer handover is triggered. The timer stops in either of the following cases:
If the filtered BCCH receive level of the target cell is smaller than the value of NCELLPUNSTPTH, the
timer stops for the target cell.
If the trigger conditions for a BQ handover are met, the timer for all handover candidate cells stops.
The target cell has the highest priority in the candidate cell list.
Issue 04 (2012-06-30)
3-26
GSM BSS
Handover
3 Technical Description
Trigger Conditions
If PBGTHOEN is set to Yes, the trigger conditions for a PBGT handover are as follows:
The target cell and the serving cell are at the same layer and have the same priority.
Issue 04 (2012-06-30)
3-27
GSM BSS
Handover
3 Technical Description
MS_TXPWR_MAX:
MS_TXPWR_MAX
n.
RxLev_NCELL
PWR_DIFF:
indicates the difference between the maximum downlink transmit power in the serving
cell due to power control and the actual downlink transmit power in the serving cell.
P:
PBGT_HO_MARGIN:
If the filtered BCCH receive level of the target cell is smaller than the value of NCELLPUNSTPTH, the
timer stops for the target cell.
If the trigger conditions for a BQ handover are met, the timer for all handover candidate cells stops.
The target cell and the serving cell are at the same layer and have the same priority.
The target cell has the highest priority in the candidate cell list.
The half-rate function must be enabled in the cell where the call is initiated.
The full-rate speech version 3 and half-rate speech version 3 must be supported by the cell where the
call is initiated.
Issue 04 (2012-06-30)
3-28
GSM BSS
Handover
3 Technical Description
The type of channel specified by the MSC during a call can be changed during a handover.
The call occupies the full-rate TCH, and the RQI/2 is greater than INHOF2HTH.
For an AMR FR call, the AMR TCHF-TCHH handover can be performed if the preceding conditions are
met for INFHHOLAST within INFHHOSTAT.
The half-rate function must be enabled in the cell where the call is initiated.
The full-rate speech version 3 and half-rate speech version 3 must be supported by the cell where the
call is initiated.
The type of channel specified by the MSC during a call can be changed during a handover.
The call occupies the half-rate TCH, and the RQI/2 is smaller than INHOH2FTH.
For an AMR HR call, the AMR TCHH-TCHF handover can be performed if the preceding conditions are
met for INFHHOLAST within INFHHOSTAT.
The algorithms for the following handovers that support SDCCH handover:
Quick handover, TA handover, BQ handover, rapid level drop handover, interference handover,
handover due to no downlink measurement report, inter-layer handover, edge handover, and
fast-moving micro cell handover
Issue 04 (2012-06-30)
3-29
GSM BSS
Handover
3 Technical Description
The algorithms for the following handovers that do not support SDCCH handover:
Enhanced dual-band network handover, load handover, PBGT handover, AMR handover, better 3G
cell handover, concentric cell handover, and tight BCCH handover
Performing the comprehensive decision and determining the candidate neighboring cells
The procedure for performing comprehensive decision based on handover results and determining the
candidate neighboring cells is as follows:
1. The BSC selects a handover type with the highest priority from all the handovers that can be
performed on each neighboring cell.
The handover priority is as follows:
Forced
handover, emergency handover, and interference handover have a high priority. Figure 3-10
shows the details.
Issue 04 (2012-06-30)
3-30
GSM BSS
Handover
3 Technical Description
Quick handover is classified into frequency offset handover and quick PBGT handover. Frequency offset handover has a
higher priority than quick PBGT handover.
Intra-cell
handover (excluding interference handover) and inter-cell handover have a normal priority.
Figure 3-11shows the details.
Issue 04 (2012-06-30)
3-31
GSM BSS
Handover
3 Technical Description
Handover decision
with normal priority
Fast-moving micro cell
handover
Enhanced dual-band
network handover
Load handover
Better cell handover
Concentric cell handover
AMR handover
TIGHT BCCH handover
2. The BSC ranks the candidate cells according to the network characteristics adjustment algorithm and
then generates the final candidate cell list. Every neighboring cell in the candidate cell list has its own
handover decision. Neighboring 2G cells and neighboring 3G cells are ranked separately.
3. In handover algorithm II, HOOPTSEL specifies whether a neighboring 2G cell or a neighboring 3G
cell is preferred.
When
A neighboring 2G cell is preferred. If the candidate cell list contains suitable neighboring 3G cells but
no suitable neighboring 2G cells, a neighboring 3G cell is selected.
When
A neighboring 3G cell is preferred. If the candidate cell list contains suitable neighboring 2G cells but
no suitable neighboring 3G cells, a neighboring 2G cell is selected.
When
If the receive level of a candidate 2G cell is smaller than or equal to HOPRETH2G, a neighboring 3G
cell is preferred.
When a neighboring 3G cell is preferred among the candidate cells, the priority of 3G better-cell handover is the lowest.
If the trigger conditions for an emergency handover are met and there is at least one candidate cell, the
emergency handover timer NEWURGHOMININTV is started. Another emergency handover decision
can be performed only when NEWURGHOMININTV times out.
Issue 04 (2012-06-30)
3-32
GSM BSS
Handover
3 Technical Description
Quick handover aims to increase the handover success rate of an MS moving at a high speed and to
ensure the call continuity and low call drop rate. Quick handover applies to the scenario where an MS
moves fast along an urban backbone road, a selected route, or a high-speed railroad.
Trigger Conditions
During handover decision, it is first determined whether the trigger conditions for a frequency offset
handover are met. When the BTS cannot send the frequency offset information or the reported
frequency offset information is invalid, quick PBGT handover is triggered, provided that other conditions
for a frequency offset handover are met.
If QUICKHOEN is set to Yes, the trigger conditions for a quick handover are as follows:
The MS is moving away from the serving cell (the frequency offset in the measurement result is a
negative value) and the moving speed of the MS is greater than MOVESPEEDTHRES.
The filtered uplink level of the serving cell is smaller than HOUPTRIGE.
The compensated downlink level of the serving cell is smaller than HODOWNTRIGE.
The path loss of configured chain neighboring cells is smaller than the specified threshold of the path
loss of the serving cell.
If the last three conditions are met simultaneously, the decision is made as follows:
If
If
If all the last three conditions are not met, quick handover is not triggered.
Issue 04 (2012-06-30)
3-33
GSM BSS
Handover
3 Technical Description
Limitations
The limitations on quick handover are as follows:
The candidate cells for quick handover must be chain neighboring cells of the serving cell.
After a quick handover is successful, the penalty is performed on the original cell during the penalty
time to prevent an immediate handover back to the original cell. The penalty time and penalty value
are specified by TIMEPUNISH and HOPUNISHVALUE respectively.
3.5.2 TA Handover
TA handover is a type of emergency handover. The TA handover decision is made according to the TA
value reported by the MS.
The TA value of a normal cell ranges from 0 to 63 and that of an extended cell ranges from 0 to 229. The
TA can be stepped up or down in steps of 553.5 m. The TA value of 63 corresponds to a distance of 35
km.
Trigger Conditions
TA handover is triggered when the following conditions are met:
The TA handover can be triggered only when the preceding two conditions are met simultaneously.
From the perspective of the trigger conditions for a TA handover, TA can be regarded as a limitation to the size of a cell.
If TALIMIT of a co-site neighboring cell is smaller than or equal to the TALIMIT of the serving cell, a
handover to the neighboring cell is prohibited.
In handover algorithm II, a cell becomes the target cell for TA handover if the previous conditions are
met for TALASTTIME within TASTATTIME.
If the trigger conditions for a TA handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
Issue 04 (2012-06-30)
3-34
GSM BSS
Handover
3 Technical Description
Limitations
After the TA handover is successful, the penalty is performed on the original cell. During
TIMETAPUNISH, SSTAPUNISH is subtracted from the level of the original cell to prevent an immediate
handover back to the original cell.
3.5.3 BQ Handover
BQ handover is a type of emergency handover in which the system makes the decision based on the
uplink/downlink receive quality on the Um interface.
Receive quality is represented by BER. The BSC measures the quality of a radio link based on the
quality band in the MR. The probable cause of an increase in BER is that the signal power is too low or
the channel interference increases.
Trigger Conditions
If BQHOEN is set to Yes, the trigger conditions for a BQ handover are as follows:
The uplink receive quality is greater than or equal to the uplink receive quality threshold of the serving
cell.
The downlink receive quality is greater than or equal to the downlink receive quality threshold of the
serving cell.
For non-AMR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMIT
and the parameter for specifying the downlink receive quality threshold is DLQUALIMIT.
For AMR FR calls, the parameter for specifying the uplink receive quality threshold is
ULQUALIMITAMRFR and the parameter for specifying the downlink receive quality threshold is
DLQUALIMITAMRFR.
For AMR HR calls, the parameter for specifying the uplink receive quality threshold is
ULQUALIMITAMRHR and the parameter for specifying the downlink receive quality threshold is
DLQUALIMITAMRHR.
In handover algorithm II, the serving cell cannot be selected as the target cell.
The receive level of target cell must meet the following conditions:
The
serving cell and the target cell work in the same frequency band.
Filtered downlink receive level of the target cell > Filtered downlink receive level of the serving cell
after compensation + (INTERCELLHYST of the serving cell configured for the neighboring cell - 64) (BQMARGIN - 64)
The
serving cell works in GSM900 and the target cell works in DCS1800.
Filtered downlink receive level of the target cell HOTHRES + (LEVHOHYST - 64).
Issue 04 (2012-06-30)
3-35
GSM BSS
Handover
The
3 Technical Description
serving cell works in DCS1800 and the target cell works in GSM900.
In handover algorithm II, a cell becomes the target cell for BQ handover if the previous conditions are
met for BQLASTTIME within BQSTATTIME.
If the trigger conditions for a BQ handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
Limitations
After the BQ handover is successful, the penalty is performed on the original cell. During
TIMEBQPUNISH, SSBQPUNISH is subtracted from the level of the original cell to prevent an immediate
handover back to the original cell.
Trigger Conditions
If INTRACELLHOEN is set to Yes and INTERFHOEN is set to Yes, the trigger conditions for an
interference handover are as follows:
The filtered value of uplink receive quality is greater than or equal to the specified receive quality
threshold at the current uplink receive level.
The filtered value of downlink receive quality is greater than or equal to the specified receive quality
threshold at the current downlink receive level.
In handover algorithm II, the interference handover is triggered when the previous conditions are met for
INTERFERELASTTIME within INTERFERESTATTIME.
The parameters for specifying the uplink and downlink receive quality thresholds are as follows:
For non-AMR FR calls, the parameter for specifying the receive quality threshold is RXQUALn, where
1 n 12.
For AMR FR calls, the parameters for specifying the receive quality threshold are RXQUALn (1 n
12) and RXLEVOFF.
If
If
Issue 04 (2012-06-30)
3-36
GSM BSS
Handover
3 Technical Description
Limitations
In handover algorithm II, if an interference handover is initiated, it cannot be initiated again within
INTERFEREHOPENTIME regardless of whether the handover is successful.
Trigger Conditions
In handover algorithm II, the trigger conditions for a handover due to no downlink measurement report
are as follows:
For TCH, the number of saved MRs with uplink quality value is greater than DATAQUAFLTLEN; for
SDCCH, the number of saved MRs with uplink quality value is greater than QLENSI.
The filtered value of uplink receive quality is greater than or equal to ULQUALIMIT.
For AMR
For AMR
In addition, the BSC triggers a handover due to no downlink measurement report when MRs of the
serving cell keep lost for NODLMRHOLASTTIME within NODLMRHOSTATTIME.
The ranked neighboring cells recorded in the last complete MR are saved as candidate cells.
Receive level in neighboring cell > Filtered receive level in serving cell + (INTERCELLHYST - 64) (BQMARGIN - 64)
A neighboring cell serves as the target cell if the previous conditions are met for ULBQLASTTIME
within ULBQSTATTIME.
Issue 04 (2012-06-30)
3-37
GSM BSS
Handover
3 Technical Description
Trigger Conditions for a Handover Due to High Load in the Underlaid Cell
The trigger conditions for a handover due to high load in the UL cell are as follows:
The two cells are in the enhanced dual-band network and OUTLOADHOENABLE is set to Yes.
The handover due to high load in the UL cell is performed only on TCHs.
The current call is within the handover margin, and the INTOINNREXLEVTHRED plus the handover
margin is greater than or equal to the receive level, which is also greater than or equal to the
INTOINNREXLEVTHRED.
When all the preceding conditions are met, the handover due to high load in the UL cell is triggered.
If the load of the UL subcell in the cell is greater than or equal to OUTSERIOVERLDTHRED, the
handover margin is adjusted in a period of OUTLOADHOPERIOD subtracted by
OUTLOADHOMODPERI. The step length for handover margin adjustment is specified by
OUTLOADHOSTEP.
Trigger Conditions for a Handover Due to Low Load in the Underlaid Cell
The trigger conditions for a handover due to low load in the UL cell are as follows:
The current call is within the handover margin and the receive level is greater than or equal to
OUTINNREXLEVTHRED.
When all the preceding conditions are met, the handover due to low load in the UL cell is triggered.
If the load of the UL subcell in the cell is smaller than OUTLOWLOADTHRED for a specified period, the
handover margin is adjusted in a period of INNLOADHOPERI. The step length for handover margin
adjustment is specified by INNLOADHOSTEP.
specifies the filtering compensated downlink receive level in the serving cell.
Thdouter:
specifies OUTINNREXLEVTHRED.
SS(u):
specifies the downlink level (power compensation is performed on the downlink level based on
the measurement) of the UL subcell where the call is originated. If the SS(u) value cannot be
obtained, the decision of enhanced dual-band network handover is not performed and the decision
condition is met by default.
SS(n):
The best neighboring cell is the one whose measured BCCH level is the highest among
neighboring cells. SS(n) is the level value of such an optimum neighboring cell that is on the same
frequency band, layer, and level with the UL subcell but is not co-sited with the UL subcell. If such a
neighboring cell is not available, the value of SS(n) is -110 dBm.
Issue 04 (2012-06-30)
3-38
GSM BSS
Handover
3 Technical Description
ATCB_THRD:
specifies ATCBTHRED.
ATCB_HYST:
specifies ATCBHYST.
Handover due to MS movement in the OL subcell is triggered if either of the preceding conditions is
met.
For the ATCB handover algorithm, the boundaries of the OL and UL subcells are determined according to the relative
value between the signal strength of serving cell and that of neighboring cell. When SS(s) is equal to SS(n), the system
considers that it is the boundary point of the UL subcell. When the value of SS(s) subtracted by SS(n) is greater than
ATCB_THRD, it is the coverage area of the OL subcell. The coverage area of the OL subcell is determined according to
different networking and coverage conditions of the existing network. In addition, the OL subcell of the serving cell and
the OL subcell of the neighboring cells will not overlap regardless of the distance between BTSs.
The handover margin specifies the range of signal level. In the case of OL/UL load handover on the enhanced
dual-band network, the MSs whose downlink levels are within the handover margin are handed over level by level.
For the handover due to high load in the UL cell, the MS must be handed over to the OL cell.
For the handover due to low load in the UL cell, the MS must be handed over to the UL cell.
For the handover due to MS movement in the OL subcell, the MS must be handed over to the UL cell.
Limitations
The limitations on the handover due to high load in the UL cell are as follows:
If the cell where the call is located is on an enhanced dual-band network, CELLINEXTP is set to
Extra(Extra).
The maximum range of the handover margin is from 63 to INTOINNREXLEVTHRED. The MS with the
highest receive level is handed over first.
The limitations on the handover due to low load in the UL cell are as follows:
If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to
Inner(Inner).
The maximum range of the handover margin is from 63 to OUTINNREXLEVTHRED. The MS with the
lowest receive level is handed over first.
The limitations on the handover due to MS movement in the OL subcell are described as follows:
The cell where the call is located is on the enhanced dual-band network. CELLINEXTP is set to
Inner(Inner).
Issue 04 (2012-06-30)
3-39
GSM BSS
Handover
3 Technical Description
Trigger Conditions
If FRINGEHOEN is set to Yes, the trigger conditions for an edge handover are as follows:
downlink receive level of the serving cell after compensation < DLEDGETHRES
Filtered
uplink receive level of the serving cell after compensation < ULEDGETHRES
Receive level of a neighboring cell > Receive level of the serving cell + (INTERCELLHYST 64)
An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are
met for EDGELAST within EDGESTAT.
If both FRINGEHOEN and EDOUTHOADEN are set to Yes, the trigger conditions for an edge handover
are as follows:
Filtered downlink receive level of the serving cell after compensation < DLEDGETHRES +
(EDOUTHOOFFSET 64)
Filtered uplink receive level of the serving cell after compensation < ULEDGETHRES +
(EDOUTHOOFFSET 64)
Receive level of a neighboring cell > Receive level of the serving cell + (INTERCELLHYST 64)
An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are
met for EDGELAST1 within EDGESTAT1.
If FRINGEHOEN is set to No, EDOUTHOADEN and EDOUTHOOFFSET are invalid.
Issue 04 (2012-06-30)
3-40
GSM BSS
Handover
3 Technical Description
Cell 2
-97 dBm
-85 dBm
After cells are ranked, the target cell must have a higher priority than the serving cell.
A cell becomes the target cell if the previous conditions are met for EDGEADJLASTTIME within
EDGEADJSTATTIME.
If the trigger conditions for an edge handover are met but the candidate 2G cells are not suitable, the
following operations are performed:
To prevent an MS that is moving fast in a macro cell from entering a micro cell, time penalty is
performed on the micro cell so that the fast-moving MS camps on the macro cell.
Issue 04 (2012-06-30)
3-41
GSM BSS
Handover
3 Technical Description
Umbrella cell
Micro cell
Trigger Conditions
If QCKMVHOEN is set to Yes, the handover decision procedure of fast-moving micro cell handover is as
follows:
1. When the trigger conditions for an edge handover or PBGT handover are met, the fast-moving micro
cell handover decision is started.
2. When the period during which the MS camps on the serving cell is shorter than QCKTIMETH, the
number of cells through which the fast-moving MS passes is incremented by one.
The cells counted by the system must locate at a layer lower than layer 4. In other words, they must be non-Umbrella
cells.
3. When the number of cells that the MS passes in fast movement reaches QCKSTATCNT, the
fast-moving micro cell handover is triggered if the number of cells that the MS passes in fast
movement counted by the system is greater than or equal to QCKTRUECNT.
A neighboring cell serves as the target cell if the previous conditions are met for HCSLASTTIME within
HCSSTATTIME.
Limitations
After the fast-moving micro cell handover is successful, the penalty is performed on all the neighboring
micro cells. During SPEEDPUNISHT, SDPUNVAL is subtracted from the receive level of every
neighboring micro cell.
Issue 04 (2012-06-30)
3-42
GSM BSS
Handover
3 Technical Description
Huawei multiband handover algorithm divides cells into four layers, with 16 priorities at each layer. The
LAYER parameter specifies at which layer a cell is located. This algorithm is applicable to complex
networking scenarios. Figure 3-14 shows the cell layers.
Figure 3-14 Cell layers
GSM900
Layer 4
Umbrella Cell
GSM900
GSM900
GSM900
Macro Cell
Layer 3
DCS1800
DCS1800
DCS1800
Micro Cell
Layer 2
GSM900
DCS1800
GSM900
GSM900
GSM900
DCS1800
DCS1800
DCS1800
Pico Cell
Layer 1
In Huawei multiband handover algorithm, a GSM network covering a certain area is divided into four
layers, which are:
Layer 4: Umbrella cell. The umbrella cells are generally GSM900 cells having the wide coverage
feature. It also implements fast MS connection.
Layer 3: Macro cell. The macro cells are generally GSM900 cells, which are commonly used in current
GSM system and serve majority of subscribers.
Layer 2: Micro cell. The micro cells are generally DCS1800 cells having the small coverage feature.
They enable capacity expansion.
Layer 1: Pico cell. The Pico cells are generally DCS1800 cells, which are used in hot spots and blind
spots.
Trigger Conditions
If BETTERCELLHOEN is set to Yes, the trigger conditions for a better-cell handover are as follows:
Issue 04 (2012-06-30)
3-43
GSM BSS
Handover
3 Technical Description
If PATHLOSSHOEN is set to Yes, path loss is taken into consideration during the sorting of the serving
cell and handover candidate cells. If PATHLOSSHOEN is set to No, path loss is not taken into
consideration during the sorting of the serving cell and handover candidate cells.
If the serving cell is in the candidate cell list, the priorities of the handover candidate cells must be
higher than the priority of the serving cell after the sorting.
If the serving cell is not in the candidate cell list, the handover candidate cells must meet the following
conditions:
LoadHoEn
is set to NO, or LoadHoEn is set to YES but the load in the serving cell is smaller than
TRIGTHRES.
If
the serving cell and the handover candidate cells are at the same layer and have the same priority,
the following conditions must be met:
SS_DL(N) - SS_DL(S) > H - 64
SS_DL(N) indicates the filtered BCCH receive level of a target cell. SS_DL(S) indicates the
compensated receive level on the downlink TCH after filtration. H indicates INTERCELLHYST of the
serving cell over the neighboring cell.
Negative handover is a type of better-cell handover. When INTERCELLHYST is set to a value
smaller than 64, the value of H 64 is negative. In this case, even if the downlink receive level in a
candidate cell is smaller than the downlink receive level in the serving cell, a negative handover to
the candidate cell can be performed.
If
the serving cell and the handover candidate cells are at different layers but have the same priority,
the following conditions must be met:
SS_DL(N) T_layer(N) + H_layer(S)
SS_DL(N) indicates the filtered BCCH receive level of a target cell. T_layer(N) indicates HOTHRES
of the target cell. H_layer(S) indicates INTELEVHOHYST of the serving cell.
If
LoadHoEn is set to YES and the load in the serving cell is greater than TRIGTHRES, better-cell
handover can be triggered.
A neighboring cell becomes a target cell if the preceding conditions are met for
BETTERCELLLASTTIME during BETTERCELLLASTTIME.
If both EDOUTHOADEN and NCELLPUNEN are set to No for the target cell, a better-cell handover is
triggered when the previous conditions are met.
If EDOUTHOADEN is set to Yes for the target cell, a better-cell handover is triggered when the previous
conditions and the following condition are met:
Filtered downlink receive level of the serving cell after power control compensation HOTHRES
(LEVHOHYST + EDOUTHOOFFSET 64)
If NCELLPUNEN is set to Yes for the target cell, the timer NCELLPUNTM is started. After the timer is
started, the value of NCELLPUNLEV is subtracted from the filtered receive level of the target cell. If the
timer expires, a better-cell handover is triggered. If the timer stops, no better-cell handover is triggered.
The timer stops when the filtered BCCH receive level of the target cell is smaller than the value of
NCELLPUNSTPTH.
The target cell has the highest priority in the candidate cell list.
3-44
GSM BSS
Handover
3 Technical Description
Handover between a full-rate TCH and a half-rate TCH performs decision based on handover algorithm
II.
Types of handover between a full-rate TCH and a half-rate TCH are as follows:
Downlink path loss of the call AMRFULLTOHALFHOPATHTHRESH + path loss handover margin
SPEECHVERSION used by the call is full-rate speech version 1 or full-rate speech version 2.
The AMR TCHH-TCHF handover is triggered if either of the preceding conditions is met for
HALFTOFULLHOLASTTIME within HALFTOFULLHOSTATTIME and SPEECHVERSION is half-rate
speech version 3.
Issue 04 (2012-06-30)
3-45
GSM BSS
Handover
3 Technical Description
The non-AMR TCHH-TCHF handover is triggered if either of the preceding conditions is met for
HALFTOFULLHOLASTTIME within HALFTOFULLHOSTATTIME and SPEECHVERSION is half-rate
speech version 1.
The algorithms for the following handovers that support SDCCH handover:
Quick handover, TA handover, BQ handover, interference handover, handover due to no downlink
measurement report, edge handover, and fast-moving micro cell handover
The algorithms for the following handovers do not support SDCCH handover:
Enhanced dual-band network handover, load handover, better-cell handover, handover between a
full-rate TCH and a half-rate TCH, better 3G cell handover, concentric cell handover, and tight BCCH
handover
Issue 04 (2012-06-30)
3-46
GSM BSS
Handover
4 Related Features
4 Related Features
Feature
Prerequisite Feature
Mutually Exclusive
Feature
Affected Feature
GBFD-110601 HUAWEI
I Handover
GBFD-110801
Processing of
Measurement Report or
GBFD-110802
Pre-processing of
Measurement Report
GBFD-510501 HUAWEI II
Handover
None
GBFD-510501 HUAWEI
II Handover
GBFD-110801
Processing of
Measurement Report or
GBFD-110802
Pre-processing of
Measurement Report
GBFD-110601 HUAWEI I
Handover
None
GBFD-110607 Direct
Retry
GBFD-110601 HUAWEI
I Handover or
GBFD-510501 HUAWEI
II Handover
None
GBFD-111005
Enhanced Channel
Assignment
Algorithm
NOTE
If channel allocation
fails, directed retry
can be triggered
using a forced
handover. This
increases the
assignment success
rate.
GBFD-110608 SDCCH
Handover
GBFD-110601
HUAWEI I Handover
or GBFD-510501
HUAWEI II Handover
The following
handover algorithms
support SDCCH
handover:
Enhanced dual-band
network handover, load
handover, better-cell
handover, handover
between a full-rate TCH
and a half-rate TCH, better
3G cell handover,
concentric cell handover,
and tight BCCH handover
Quick handover, TA
handover, BQ
handover,
interference
handover, handover
due to no downlink
measurement report,
edge handover, and
fast-moving micro cell
handover
Issue 04 (2012-06-30)
None
4-1
GSM BSS
Handover
4 Related Features
GBFD-110801
Processing of
Measurement Report
None
GBFD-110802
Pre-processing of
Measurement Report
None
GBFD-110802
Pre-processing of
Measurement Report
None
GBFD-110801 Processing
of Measurement Report
None
None
None
None
None
GBFD-110601 HUAWEI
I Handover or
GBFD-510501 HUAWEI
II Handover
None
None
GBFD-113401 Half
Rate Speech
None
None
GBFD-110601
HUAWEI I Handover
or GBFD-510501
HUAWEI II Handover
GBFD-110601
HUAWEI I Handover
or GBFD-510501
HUAWEI II Handover
None
None
GBFD-115502 AMR
HR
GBFD-510102 Fast
Move Handover
GBFD-510103 Chain
Cell Handover
GBFD-117101 BTS
power lift for handover
GBFD-115522 Dynamic
HR/FR Adaptation
GBFD-115504 AMR
FR/HR Dynamic
Adjustment
GBFD-110601
HUAWEI I Handover
or GBFD-510501
HUAWEI II Handover
GBFD-510103 Chain
Cell Handover
GBFD-110601
HUAWEI I Handover
or GBFD-510501
HUAWEI II Handover
GBFD-510102 Fast
Move Handover
NOTE
The following handover algorithms do not have feature IDs: quick handover, TA handover, BQ handover,
interference handover, handover due to no downlink measurement report, edge handover, and
fast-moving micro cell handover, enhanced dual-band network handover, load handover, better-cell
handover, handover between a full-rate TCH and a half-rate TCH, better 3G cell handover, concentric
cell handover, and tight BCCH handover.
Issue 04 (2012-06-30)
4-2
GSM BSS
Handover
Issue 04 (2012-06-30)
5-1
GSM BSS
Handover
Issue 04 (2012-06-30)
5-2
GSM BSS
Handover
Issue 04 (2012-06-30)
5-3
GSM BSS
Handover
6 Engineering Guidelines
6 Engineering Guidelines
6.1 When to Use Handover
6.1.1 HUAWEI I Handover
It is recommended that the HUAWEI I Handover feature be used.
Issue 04 (2012-06-30)
6-1
GSM BSS
Handover
6 Engineering Guidelines
Issue 04 (2012-06-30)
6-2
GSM BSS
Handover
6 Engineering Guidelines
Issue 04 (2012-06-30)
6-3
GSM BSS
Handover
6 Engineering Guidelines
Issue 04 (2012-06-30)
6-4
GSM BSS
Handover
7 Parameters
7 Parameters
Table 7-1 Parameter description
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-1
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Unit: dB
Issue 04 (2012-06-30)
7-2
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
FULLHOPATH
THRESH
GCELLHOBA 0501
SIC(Optional)
Feature
Name
Description
II
during AMR TCHH-to-TCHF handovers.
Handover AMR TCHH-to-TCHF handovers can be
triggered when the following condition is
met:
Path loss of an AMR half-rate call >=
Value of this parameter
If the call is initiated in an overlaid
subcell, its path loss includes the path
loss offset in the overlaid subcell.
GUI Value Range: 0~255
Actual Value Range: 0~255
Default Value: 108
Unit: dB
Issue 04 (2012-06-30)
7-3
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
determine whether to assign TCHHs to
AMR calls,
and Handover algorithm generation 1
uses the AMR TCH/H prior cell load
threshold to determine whether to hand
over AMR calls occupying TCHFs to
TCHHs;
When this parameter is set to OFF, the
AMR TCH/H prior cell load threshold is
not used during channel assignment,
Handover algorithm generation 1
determines whether to hand over AMR
calls occupying TCHFs to TCHHs
without considering traffic in the
corresponding cell.
GUI Value Range: OFF(Off), ON(On)
Actual Value Range: OFF, ON
Default Value: ON
Unit: None
Issue 04 (2012-06-30)
7-4
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
ENABLE(Enable)
Actual Value Range: DISABLE, ENABLE
Default Value: DISABLE
Unit: None
ATCBHYST
BSC6900 SET
GBFD-11 Enhanced Meaning: Hysteresis in the distance
GCELLHOED 4402
Dual-Ban between the boundary of the overlaid
d Network subcell and the boundary of the
BPARA(Option
al)
underlaid subcell. This parameter helps
to adjust "Distance Between Boudaries
of Subcells" and thus to prevent
ping-pong handover between the
overlaid and underlaid subcells. Assume
that the signal strength of the serving cell
is SS(s) and that the signal strength of
the neighbor cell is SS(n). If SS(s) SS(n) < "Distance Between Boudaries of
Subcells" - "Distance Hysteresis
Between Boudaries", the MS is handed
over from the overlaid subcell to the
underlaid subcell.
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 2
Unit: dB
Issue 04 (2012-06-30)
7-5
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
carries the BCCH and the coverage of
the TRX that does not carry the BCCH.
The relevant computation is the same as
the preceding computation.
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 10
Unit: dB
BANTIME
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Duration in which intra-cell
Handover handover is forbidden after the number
GCELLHOAD( 0601
Optional)
GBFD-51 HUAWEI of consecutive intra-cell handovers
reaches the maximum. Intra-cell
0501
II
Handover handover can be conducted again only
after this duration.
GUI Value Range: 1~200
Actual Value Range: 1~200
Default Value: 20
Unit: s
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Whether to enable the bad
Handover quality (BQ) handover algorithm.
GCELLHOBA 0601
SIC(Optional) GBFD-51 HUAWEI Whether to trigger BQ handover
depends on the uplink and downlink
0501
II
Handover transmit quality (measured by using
BER). If the uplink or downlink BQ
exceeds the BQ handover threshold,
emergency BQ handover is triggered.
Issue 04 (2012-06-30)
7-6
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
The possible causes of BER increase (or
quality degradation) include too low
signal power and channel interference.
GUI Value Range: NO(No), YES(Yes)
Actual Value Range: NO, YES
Default Value: YES
Unit: None
BQMARGIN
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: Difference between the
Handover downlink receive level of the serving cell
G2GNCELL(O 0601
ptional)
GBFD-51 HUAWEI and that of a neighboring cell during bad
quality handovers. This parameter is
0501
MOD
II
G2GNCELL(O GBFD-11 Handover used to calculate the bad quality
handover hysteresis based on the
ptional)
8106
Dynamic following formula:
Power
Sharing Bad quality handover hysteresis = Value
of "INTERCELLHYST" -Value of this
parameter
Bad quality handovers to a neighboring
cell can be triggered when the following
condition is met:
(Downlink receive level of the
neighboring cell after filtering - Downlink
receive level of the serving cell after
power control compensation) > (Value of
"INTERCELLHYST " - 64) - (Value of this
parameter - 64). The actual value of this
parameter is equal to the GUI value
minus 64.
GUI Value Range: 0~127
Actual Value Range: -64~63
Default Value: 69
Unit: dB
Issue 04 (2012-06-30)
7-7
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
MOD
G2GNCELL(O
ptional)
Description
the handover is triggered.
This parameter specifies the number N.
GUI Value Range: 1~16
Actual Value Range: 0.5~8
Default Value: 1
Unit: 0.5s
CELLLAYER
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: Layer of the cell. If the layer of
Handover the cell is lower, it is more likely that a
GEXT3GCELL 0601
(Optional)
GBFD-51 HUAWEI handover to the cell will be triggered.
0501
GUI Value Range: 1, 2, 3, 4
MOD
II
Handover Actual Value Range: 1, 2, 3, 4
GEXT3GCELL
(Optional)
Default Value: 3
Unit: None
Issue 04 (2012-06-30)
7-8
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
CHTYPE
BSC6900 SET
MRFD-21 Configurat Meaning: Type and function of the
channel
GTRXCHAN( 0301
ion
Optional)
Managem
GBFD-51
ent
1403
Combined BCCH+7TCH
Extended
BCCH
Main BCCH+SDCCH/8+6TCH
Main BCCH+2SDCCH/8+5TCH
Main BCCH+SDCCH/8+extended BCCH
(BCH)+5TCH
Main BCCH+SDCCH/8+extended BCCH
(BCH)+TCH+extended BCCH
(BCH)+3TCH
The BCCHs in a cell need to be
configured according to the number of
channels in the cell and the paging
capacity in the location area.
The main and combined BCCHs shall
always be configured in timeslot 0. An
extended BCCH can be configured only
in timeslot 2, 4, or 6. If an extended
BCCH is configured, the CCCH
parameter in the system message data
needs to be configured accordingly. For
example, if an extended BCCH is
Issue 04 (2012-06-30)
7-9
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
configured in timeslot 2, the CCCH
parameter in the system message data
needs to be configured as two
uncombined CCCHs.
To enable cell broadcast in a cell, add a
CBCH to a cell that is about to support
cell broadcasting during radio channel
configuration. In the case of
SDCCH/8+CBCH cell broadcast, set this
parameter to SDCCH_CBCH. You can
change a TCH into SDCCH+CBCH or
the original SDCCH into SDCCH+CBCH.
In the case of SDCCH/4 cell broadcast,
set this parameter to BCCH_CBCH. With
the same effect, the SDCCH/8 and
SDCCH/4 cell broadcast services serve
different network planning requirements.
The data configurations for half-rate
networking differ from the data
configurations for other networking.
In the case of half-rate networking, each
TRX maintains high RSL traffic.
Therefore, the LAPD signaling link
multiplexing ratio at the Abis interface is
up to 2:1.
In the case of half-rate networking, each
E1 supports up to 13 TRXs. If the LAPD
signaling links are demultiplexed, each
E1 supports fewer TRXs.
GUI Value Range: TCHFR(TCH Full
Rate), TCHHR(TCH Half Rate),
SDCCH8(SDCCH8), MBCCH(Main
BCCH), CBCCH(Combined BCCH),
BCH(BCH),
BCCH_CBCH(BCCH+CBCH),
SDCCH_CBCH(SDCCH+CBCH),
PBCCH_PDTCH(PBCCH+PDTCH),
PCCCH_PDTCH(PCCCH+PDTCH),
PDTCH(PDTCH), DPDCH(Dynamic
PDCH)
Actual Value Range: TCHFR, TCHHR,
SDCCH8, MBCCH, CBCCH, BCH,
BCCH_CBCH, SDCCH_CBCH,
PBCCH_PDTCH, PCCCH_PDTCH,
PDTCH, DPDCH
Issue 04 (2012-06-30)
7-10
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Default Value: TCHFR
Unit: None
Issue 04 (2012-06-30)
7-11
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Unit: None
Issue 04 (2012-06-30)
7-12
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
0501
Issue 04 (2012-06-30)
7-13
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Value of this parameter
Handovers due to directed retry to a
neighboring cell can be triggered when
the following condition is met:
(Downlink receive level of the
neighboring cell after filtering - Downlink
receive level of the serving cell after
power control compensation) > (Value of
"INTERCELLHYST" - 64) - (Value of this
parameter - 64).
GUI Value Range: 0~128
Actual Value Range: 0~128
Default Value: 72
Unit: dB
Load
GBFD-11 Sharing
9501
Adaptive "No preempt of CCHs" indicates the
Adjustme circuit domain can preempt all the
dynamic channels except the CCHs.
nt of
Issue 04 (2012-06-30)
7-14
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Uplink
and
Downlink
Channels
Issue 04 (2012-06-30)
7-15
GSM BSS
Handover
7 Parameters
Parameter ID NE
EDGELAST
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-51 HUAWEI Meaning: According to the P/N rule, if the
GCELLHOBA 0501
II
conditions for edge handover are met in
SIC(Optional)
Handover P of N measurement reports, the
handover is triggered.
This parameter specifies the number P.
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 1
Unit: 0.5s
BSC6900 SET
GBFD-51 HUAWEI Meaning: According to the P/N rule, if the
GCELLHOBA 0501
II
conditions for edge handover are met in
SIC(Optional)
Handover P of N measurement reports, the
handover is triggered.
This parameter specifies the number N.
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 1
Unit: 0.5s
Issue 04 (2012-06-30)
7-16
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Default Value: NO
Unit: None
Issue 04 (2012-06-30)
7-17
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Default Value: 30
Unit: dB
FDDREP
BSC6900 SET
GCELLCCUT
RANSYS(Opti
onal)
FLTPARAA1
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA2
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
Issue 04 (2012-06-30)
7-18
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA3
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
Issue 04 (2012-06-30)
7-19
GSM BSS
Handover
7 Parameters
Parameter ID NE
FLTPARAA4
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA5
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Issue 04 (2012-06-30)
7-20
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA6
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA7
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Issue 04 (2012-06-30)
7-21
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAA8
BSC6900 SET
GBFD-11 HUAWEI I Meaning: One of the nine parameters
Handover (filter parameters A1 to A8 and filter
GCELLHOEM 0601
G(Optional)
parameter B) used to configure the filter
for determining whether the received
signal level drops rapidly. The
computation formula is as follows:
C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x
C(nt-2t) + ... + A8 x C(nt-7t)
If C1(nt) is less than B and C(nt) is less
than the threshold for edge handover,
the signal level is considered dropping
rapidly.
In the formula, A1 to A8 are filter
parameters A1 to A8 minus 10 and B is
the negative of filter parameter B. C(nt)
indicates the received signal level in the
uplink measurement report of the serving
cell received at time nt.
Setting the filter helps to configure the
maximum allowed signal level drop
degree.
GUI Value Range: 0~20
Actual Value Range: 0~20
Default Value: 10
Unit: None
FLTPARAB
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Trend of the received signal
Handover level of the cell during a period. This
GCELLHOEM 0601
G(Optional)
parameter helps to configure the filter for
determining whether the received signal
level drops rapidly. If this parameter is
higher, a more rapid signal level drop is
required to trigger the handover due to
rapid signal level drop.
GUI Value Range: 0~200
Actual Value Range: 0~200
Default Value: 0
Unit: None
Issue 04 (2012-06-30)
7-22
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-23
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Default Value: 4
Unit: 0.5s
Issue 04 (2012-06-30)
7-24
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
ptional)
MOD
G2GNCELL(O
ptional)
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-25
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-26
GSM BSS
Handover
7 Parameters
Parameter ID NE
HOOPTSEL
MML
Command
BSC6900 SET
GCELLHOUT
RANFDD(Opti
onal)
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-27
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Handover threshold during the
Handover handovers between cells on different
GCELLHOBA 0601
SIC(Optional) GBFD-51 HUAWEI layers or of different priorities. This value
is used to suppress inter-layer ping-pong
0501
II
Handover handovers.
Inter-layer handover threshold of the
serving cell = "Inter-layer HO threshold" "Inter-layer HO Hysteresis";
Inter-layer handover threshold of a
neighboring cell = "Inter-layer HO
Threshold" + "Adjacent Cell Inter-layer
HO Hysteresis" - 64.
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 25
Unit: dB
HOTRYCNT
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Maximum number of handover
Handover attempts that can be triggered. When
GCELLHOAD( 0601
Optional)
there is more than one candidate cell,
the BSC attempts to hand over the MS to
the second candidate cell if congestion
occurs in the first candidate cell to
ensure handover success and call
continuity. If congestion also occurs in
the second candidate cell, the BSC
attempts to hand over the MS to the third
candidate cell.
GUI Value Range: 1~3
Actual Value Range: 1~3
Default Value: 3
Unit: None
Issue 04 (2012-06-30)
7-28
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
INHOF2HTH
BSC6900 SET
GBFD-11 AMR
GCELLHOBA 5504
FR/HR
SIC(Optional)
Dynamic
Adjustme
nt
INHOH2FTH
BSC6900 SET
GBFD-11 AMR
GCELLHOBA
FR/HR
Issue 04 (2012-06-30)
7-29
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
SIC(Optional) 5504
Feature
Name
Description
Issue 04 (2012-06-30)
GBFD-11 SDCCH
7-30
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
EN
GCELLHOCT 0608
RL(Optional)
Feature
Name
Description
Issue 04 (2012-06-30)
7-31
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Unit: 0.5s
Issue 04 (2012-06-30)
7-32
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Average receive level in the overlaid
subcell and the underlaid cell >= Value of
this parameter
Receive level in the underlaid cell Highest receive level in a neighboring
cell of the underlaid cell > Sum of the
values of "ATCBTHRED" and
"ATCBHYST".
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 30
Unit: dB
Issue 04 (2012-06-30)
7-33
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Unit: None
LAYER
BSC6900 SET
GBFD-11
GCELLBASIC 0601
PARA(Optiona GBFD-51
l)
0501
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Whether to allow inter-layer
Handover and inter-level handovers. The
GCELLHOBA 0601
SIC(Optional) GBFD-51 HUAWEI inter-layer and inter-level handover
algorithm is achieved through the setting
0501
II
Handover of different layers and priorities for cells,
which switches traffic to cells of a higher
precedence (decided by "Layer of the
cell" and "Cell priority" together).
GUI Value Range: NO(No), YES(Yes)
Actual Value Range: NO, YES
Default Value: YES
Unit: None
Issue 04 (2012-06-30)
7-34
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
threshold" + "Adjacent Cell Inter-layer
HO Hysteresis" - 64.
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 2
Unit: dB
LEVLAST
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: The triggering of inter-layer
Handover handovers must meet the P/N criteria,
G2GNCELL(O 0601
ptional)
that is, when the condition for inter-layer
handovers is met for a consecutive P
MOD
seconds during N seconds, an inter-layer
G2GNCELL(O
handover is triggered. This parameter
ptional)
corresponds to the P in the P/N criteria.
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 4
Unit: 0.5s
LEVSTAT
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: The triggering of inter-layer
Handover handovers must meet the P/N criteria,
G2GNCELL(O 0601
ptional)
that is, when the condition for inter-layer
handovers is met for a consecutive P
MOD
seconds during N seconds, an inter-layer
G2GNCELL(O
handover is triggered. This parameter
ptional)
corresponds to the N in the P/N criteria.
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 6
Unit: 0.5s
LOADHOAD
BSC6900 SET
GBFD-11 HUAWEI I Meaning: This parameter specifies
Handover whether to use the load handover or the
GCELLHOAD( 0601
Optional)
enhanced load handover.
GUI Value Range: NO(NO), YES(YES)
Actual Value Range: YES, NO
Default Value: NO
Unit: None
Issue 04 (2012-06-30)
7-35
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
when the load of the serving cell reaches
a specified level. Certain traffic that could
not be handed over back to a
neighboring cell during PBGT handovers
can be handed over now. If this
parameter is set to 0, enhanced
load-based handovers to the neighboring
cell cannot be triggered.
GUI Value Range: 0~127
Actual Value Range: -64~63
Default Value: 0
Unit: dB
Issue 04 (2012-06-30)
7-36
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
each level of handovers.
This parameter indicates the duration of
each handover level.
GUI Value Range: 1~255
Actual Value Range: 1~255
Default Value: 10
Unit: s
Issue 04 (2012-06-30)
7-37
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
performed only when the level difference
between the neighboring cell and the
serving cell is between ("Inter-cell HO
Hysteresis" - 64) - "Load HO Bandwidth"
and ("Inter-cell HO Hysteresis" - 64).
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 25
Unit: dB
Issue 04 (2012-06-30)
7-38
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Default Value: 80
Unit: %
LoadHoEn
BSC6900 SET
GBFD-11 HUAWEI I Meaning: This parameter specifies
Handover whether a traffic load-sharing handover
GCELLHOBA 0601
SIC(Optional) GBFD-51 HUAWEI is enabled. The load handover helps to
reduce cell congestion, improve success
0501
II
Handover rate of channel assignment, and balance
the traffic load among cells, thus
improving the network performance. The
load handover is used as an emergency
measure instead of a primary measure to
adjust abnormal traffic burst in partial
areas. If load handovers occur frequently
in a partial area, the cell and TRX
configuration of BTSs and the network
layout should be adjusted.
GUI Value Range: NO(No), YES(Yes)
Actual Value Range: NO, YES
Default Value: NO
Unit: None
MINOFFSET
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: Minimum receive level offset.
G2GNCELL(O
MSs can be handed over back to a
Issue 04 (2012-06-30)
7-39
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
ptional)
0601
Feature
Name
Description
Issue 04 (2012-06-30)
7-40
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-41
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
0501
II
Huawei handover algorithm I or during
Handover better cell handovers in the case of
Huawei handover algorithm II. This
parameter is used to prevent ping-pong
handover.
GUI Value Range: NO(No), YES(Yes)
Actual Value Range: NO, YES
Default Value: NO
Unit: None
Issue 04 (2012-06-30)
7-42
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-43
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
GUI Value Range: 0~255
Actual Value Range: 0~255
Default Value: 14
Unit: dB
Issue 04 (2012-06-30)
7-44
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-45
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Issue 04 (2012-06-30)
7-46
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Actual Value Range: 0~63
Default Value: 25
Unit: dB
Issue 04 (2012-06-30)
7-47
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Default Value: 5
Unit: dB
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Whether to use the PBGT
Handover handover algorithm. PBGT handovers
GCELLHOBA 0601
SIC(Optional)
are based on path loss. The PBGT
Issue 04 (2012-06-30)
7-48
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
handover algorithm searches in real time
for cells that have lower path loss and
meet certain system requirements, and
decides whether to perform the
handovers. To avoid ping-pong
handovers, PBGT handovers can occur
only on TCHs and among cells on a
same layer and a same priority level.
GUI Value Range: NO(No), YES(Yes)
Actual Value Range: NO, YES
Default Value: YES
Unit: None
PBGTLAST
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: The triggering of PBGT
Handover handovers must meet the P/N criteria,
G2GNCELL(O 0601
ptional)
that is, when the condition for PBGT
handovers is met for a consecutive P
MOD
seconds during N seconds, a PBGT
G2GNCELL(O
handover is triggered. This parameter
ptional)
corresponds to the P in the P/N criteria.
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 4
Unit: 0.5s
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: The triggering of PBGT
Handover handovers must meet the P/N criteria,
G2GNCELL(O 0601
ptional)
that is, when the condition for PBGT
handovers is met for a consecutive P
MOD
seconds during N seconds, a PBGT
G2GNCELL(O
handover is triggered. This parameter
ptional)
corresponds to the N in the P/N criteria.
Issue 04 (2012-06-30)
7-49
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
GUI Value Range: 1~32
Actual Value Range: 0.5~16
Default Value: 6
Unit: 0.5s
BSC6900 SET
MRFD-21 Configurat Meaning: This parameter specifies the
GTRXDEV(Op 0301
ion
transmit power level of the TRX. The
tional)
Managem greater this parameter is, the smaller the
ent
transmit power is. When this parameter
is set to "0", the transmit power level of
the TRX is the greatest. Each time this
parameter increases by one level, the
transmit power reduces by 2 dB.
For different types of BTSs, the value
range of this parameter is different.
BTS3X: 0-10
BTS3001C: 0-13
BTS3002C: 0-10
Double-transceiver BTSs
(BTS3012,BTS3012AE,BTS3006C):
0-10
DBS3900 GSM, BTS3900 GSM,
BTS3900A GSM: 0-10.
BTS3900B:0-12.
GUI Value Range: 0~13
Actual Value Range: 0~13
Default Value: 0
Unit: None
Issue 04 (2012-06-30)
7-50
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
Unit: None
PRIOR
BSC6900 SET
GBFD-11
GCELLBASIC 0601
PARA(Optiona GBFD-51
l)
0501
Issue 04 (2012-06-30)
7-51
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
parameter corresponds to the N in the
P/N criteria.
GUI Value Range: 1~10
Actual Value Range: 1~10
Default Value: 3
Unit: None
BSC6900 SET
GBFD-11 Enhanced Meaning: For the purpose of accurately
GCELLCHMG 1005
Channel reflecting the radio environment of a
AD(Optional)
Assignme network, filtering is performed on the
nt
measured values in several consecutive
Algorithm measurement reports. This parameter
indicates the number of measurement
reports used for the filtering of the signal
quality on service or data channels. This
parameter is used to determine whether
interferences exist on channels.
GUI Value Range: 1~32
Actual Value Range: TCH:480~15360,
step:480; SDCCH:470~15040, step:470
Default Value: 6
Unit: ms
Issue 04 (2012-06-30)
7-52
GSM BSS
Handover
7 Parameters
Parameter ID NE
QLENSI
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-11 Enhanced Meaning: For the purpose of accurately
GCELLCHMG 1005
Channel reflecting the radio environment of a
AD(Optional)
Assignme network, filtering is performed on the
nt
measured values in several consecutive
Algorithm measurement reports. This parameter
indicates the number of measurement
reports used for the filtering of the signal
quality on signaling channels. This
parameter is used to determine whether
interferences exist on channels.
GUI Value Range: 1~32
Actual Value Range: TCH:480~15360,
step:480; SDCCH:470~15040, step:470
Default Value: 2
Unit: ms
BSC6900 SET
GBFD-11 AMR FR Meaning: For AMR FR voice services, a
GCELLAMRQ 5501
HUAWEI fixed amount of offset is added to the
UL(Optional) GBFD-51 II
corresponding grade of the received
0501
Handover signal quality for the interference
handover of non-AMR FR voice services.
GBFD-11 HUAWEI I
0601
Handover GUI Value Range: 0~70
Actual Value Range: 0~70
Default Value: 5
Unit: None
RXQUAL1
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Threshold for triggering
Handover interference handovers of non-AMR FR
GCELLAMRQ 0601
UL(Optional) GBFD-51 HUAWEI voice services.
0501
II
If "INTERFHOEN" is set to YES(Yes),
Handover interference handovers can be triggered
Issue 04 (2012-06-30)
7-53
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
when the following conditions are met:
The uplink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current uplink level.
The downlink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current downlink level.
At the current uplink and downlink levels,
the parameters for specifying the
thresholds for the uplink and downlink
receive signal quality are as follows:
"RXQUALn" (1 <= n <= 12): used for
non-AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"FHGAINOFFSET" if both of the
following conditions are met:
2 <= n <= 12
The current frequencies involve in FH.
"RXQUALn" (1 <= n <= 12): used for
AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"RXLEVOFF" if the following condition is
met:
2 <= n <= 12
The receive signal quality equals the
sum of the values of "RXQUALn",
"RXLEVOFF", and "FHGAINOFFSET" if
the current frequencies involve in FH.
GUI Value Range: 0~70
Actual Value Range: 0~70
Default Value: 60
Unit: None
RXQUAL12
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Threshold for triggering
Handover interference handovers of non-AMR FR
GCELLAMRQ 0601
UL(Optional) GBFD-51 HUAWEI voice services.
0501
II
If "INTERFHOEN" is set to YES(Yes),
Handover interference handovers can be triggered
Issue 04 (2012-06-30)
7-54
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
when the following conditions are met:
The uplink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current uplink level.
The downlink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current downlink level.
At the current uplink and downlink levels,
the parameters for specifying the
thresholds for the uplink and downlink
receive signal quality are as follows:
"RXQUALn" (1 <= n <= 12): used for
non-AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"FHGAINOFFSET" if both of the
following conditions are met:
2 <= n <= 12
The current frequencies involve in FH.
"RXQUALn" (1 <= n <= 12): used for
AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"RXLEVOFF" if the following condition is
met:
2 <= n <= 12
The receive signal quality equals the
sum of the values of "RXQUALn",
"RXLEVOFF", and "FHGAINOFFSET" if
the current frequencies involve in FH.
GUI Value Range: 0~70
Actual Value Range: 0~70
Default Value: 40
Unit: None
RXQUAL2
BSC6900 SET
GBFD-11 HUAWEI I Meaning: Threshold for triggering
Handover interference handovers of non-AMR FR
GCELLAMRQ 0601
UL(Optional) GBFD-51 HUAWEI voice services.
0501
II
If "INTERFHOEN" is set to YES(Yes),
Handover interference handovers can be triggered
Issue 04 (2012-06-30)
7-55
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
when the following conditions are met:
The uplink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current uplink level.
The downlink receive signal quality after
filtering is higher than or equal to the
specified threshold for the receive signal
quality at the current downlink level.
At the current uplink and downlink levels,
the parameters for specifying the
thresholds for the uplink and downlink
receive signal quality are as follows:
"RXQUALn" (1 <= n <= 12): used for
non-AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"FHGAINOFFSET" if both of the
following conditions are met:
2 <= n <= 12
The current frequencies involve in FH.
"RXQUALn" (1 <= n <= 12): used for
AMR FR calls.
The receive signal quality equals the
value of "RXQUAL1" if the value of n is 1.
The receive signal quality equals the
sum of the values of "RXQUALn" and
"RXLEVOFF" if the following condition is
met:
2 <= n <= 12
The receive signal quality equals the
sum of the values of "RXQUALn",
"RXLEVOFF", and "FHGAINOFFSET" if
the current frequencies involve in FH.
GUI Value Range: 0~70
Actual Value Range: 0~70
Default Value: 50
Unit: None
SDPUNVAL
BSC6900 ADD
GBFD-11 HUAWEI I Meaning: Level value of the penalty that
Handover is performed on the neighboring cells of
GEXT2GCELL 0601
(Optional)
GBFD-51 HUAWEI the cell where a fast-moving MS is
located. The neighboring cells must be
0501
MOD
II
Handover located at the Macro, Micro, or Pico layer
GEXT2GCELL
other than the Umbrella layer.
Issue 04 (2012-06-30)
7-56
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
(Optional)
Description
GUI Value Range: 0~63
Actual Value Range: 0~63
Default Value: 30
Unit: dB
Group
Call
Reliability
Enhancin
g
Issue 04 (2012-06-30)
7-57
GSM BSS
Handover
7 Parameters
Parameter ID NE
SSLENSD
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-11 Enhanced Meaning: When the network receives
GCELLCHMG 1005
Channel measurement reports, the measurement
AD(Optional)
Assignme values in several straight measurement
nt
reports are filtered to reflect the radio
Algorithm operating environment for the sake of
accuracy. This parameter specifies the
number of successive measurement
reports that are used to determine the
signal strength on traffic/data channels.
This parameter is used to determine
whether interferences exist on channels.
GUI Value Range: 1~32
Actual Value Range: TCH:480~15360,
step:480; SDCCH:470~15040, step:470
Default Value: 6
Unit: ms
7-58
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
messages: [(Average Message Usage Inner Flow Control Discard Begin
Threshold)/(Inner Flow Control Discard
All Threshold - Inner Flow Control
Discard Begin Threshold) x 100]/10+1
(round-down for division operation). If the
value is smaller than Inner Flow Control
Discard Begin Threshold, Level 0 is
used. If the value is equal to or greater
than Inner Flow Control Discard Begin
Threshold, the level is calculated. The
value range is from 0 to 11.
2) Flow control threshold for the CPU to
start to discard the channel access
messages and paging messages: 80%
. Flow control threshold for the CPU to
discard all channel access messages
and paging messages: 100%
. CPU usage smaller than 80%
corresponds to level 0. CPU usage equal
to or greater than CPU flow control
threshold 80% corresponds to level 2. An
increase of 5% means an increase of 2
levels. Level 10 is the highest. The level
value can be 0, 2, 4, 6, 8, and 10.
GUI Value Range: 0, 8~11
Actual Value Range: 0, 8~11
Default Value: 10
Unit: None
TAFLTLEN
BSC6900 SET
GBFD-11 HUAWEI I Meaning: When the network receives
Handover measurement reports, the measurement
GCELLHOFIT 0601
PEN(Optional) GBFD-51 HUAWEI values in several straight measurement
reports are filtered to reflect the radio
0501
II
Handover operating environment for the sake of
accuracy. This parameter specifies the
number of measurement reports
sampled for filtering the TA.
GUI Value Range: 1~31
Actual Value Range: TCH:480~14880,
step:480; SDCCH:470~14570, step:470
Default Value: 4
Unit: ms
TAHOEN
BSC6900 SET
Issue 04 (2012-06-30)
7-59
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
BSC6900 SET
GBFD-11 HUAWEI I Meaning: An emergency handover is
Handover triggered when TA is greater than or
GCELLHOEM 0601
G(Optional)
GBFD-51 HUAWEI equal to the value of this parameter.
0501
GUI Value Range: 0~255
II
Handover Actual Value Range: 0~255
Default Value: 255
Unit: bit
Issue 04 (2012-06-30)
7-60
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
Unit: ms
Issue 04 (2012-06-30)
7-61
GSM BSS
Handover
7 Parameters
Parameter ID NE
MML
Command
Feature
ID
Feature
Name
Description
ST(Optional)
BSC6900 SET
GBFD-11 HUAWEI I Meaning: The load handover is triggered
Handover when the traffic load in a cell is greater
GCELLHOAD( 0601
Optional)
GBFD-51 HUAWEI than the value of this parameter.
0501
GUI Value Range: 0~100
II
Handover Actual Value Range: 0~100
Default Value: 90
Unit: None
Issue 04 (2012-06-30)
7-62
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
measurement report are met for P
seconds within N seconds. This
parameter specifies P in the P/N rule.
GUI Value Range: 1~8
Actual Value Range: 0.5~4
Default Value: 1
Unit: 0.5s
Issue 04 (2012-06-30)
7-63
GSM BSS
Handover
Parameter ID NE
7 Parameters
MML
Command
Feature
ID
Feature
Name
Description
GUI Value Range: 0~70
Actual Value Range: 0~70
Default Value: 60
Unit: None
Issue 04 (2012-06-30)
7-64
GSM BSS
Handover
8 Counters
8 Counters
Table 8-1 Counter description
Counter ID
Counter Name
Counter Description
Feature ID
Feature Name
Call Control
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-1
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Inter-Cell Handover
Procedure
1278074425 TRX.HO.CMD.SD
R4430A:Attempted
Handovers (SDCCH)
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
1278074426 TRX.HO.CMD.TCH
R4439A:Attempted
Handovers (TCH)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
1278074427 TRX.HO.CMPL.SD
R4430B:Completed
Handovers (SDCCH)
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
1278074428 TRX.HO.CMPL.TCH
R4439B:Completed
Handovers (TCH)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
1278074431 TRX.HO.CMD
CR443A:Attempted
Handovers
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
1278074432 TRX.HO.SUCC
CR443B:Completed
Handovers
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
Assignment
and Immediate
Assignment
Assignment
and Immediate
Assignment
Direct Retry
Direct Retry
1278076471 CELL.ASS.FAIL.RECON A312M:Failed Assignments
N.SUCC.DR.NO.CH
(Reconnection to Old
Channels, No Channel
Available in Directed Retry)
Issue 04 (2012-06-30)
GBFD-110502
GBFD-110607
Assignment
and Immediate
Assignment
Direct Retry
8-2
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Assignment
and Immediate
Assignment
Assignment
and Immediate
Assignment
HUAWEI I
Handover
GBFD-110608
HUAWEI II
Handover
Direct Retry
Direct Retry
SDCCH
Handover
1278077418 CELL.INTRACELL.HO.R H3009:Internal Intra-Cell
EQ.TCH
Handover Requests (TCH)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
Issue 04 (2012-06-30)
HUAWEI I
Handover
HUAWEI II
Handover
8-3
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
SDCCH
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-4
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
8-5
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-110601
HUAWEI I
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-6
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
ETECT.SD
Feature Name
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
1278077482 CELL.INTRACELL.HO.S CH303:Successful Internal
UCC
Intra-Cell Handovers
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
1278077489 CELL.INTRACELL.HO.F CH302A:Failed Internal
AIL.CONG
Intra-Cell Handovers (No
Channel Available)
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
8-7
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
AIL.RECONN.SUCC
Intra-Cell Handovers
(Reconnection to Old
Channels)
GBFD-510501
Handover
HUAWEI II
Handover
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278077525 CELL.TCH.HO.DROP
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Issue 04 (2012-06-30)
8-8
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-9
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Requests (TCH)
(1800/1900-900/850/810)
GBFD-510501
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-10
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-11
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
L.HO.FAIL.CONG.SD
GBFD-510501
Unsuccessful Incoming
Internal Inter-Cell Handovers GBFD-110608
(No Channel Available)
(SDCCH)
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
SDCCH
Handover
Issue 04 (2012-06-30)
8-12
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-13
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
O.CMD
GBFD-510501
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278078483 CELL.HO.SUCC.RATE
HUAWEI I
Handover
RH303:Handover Success
Rate
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278078484 CELL.RD.HO.SUCC.RAT RH303A:Success Rate of
E
Radio Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-14
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
8-15
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
(1800/1900-1800/1900)
Feature Name
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
Issue 04 (2012-06-30)
HUAWEI I
Handover
HUAWEI II
Handover
8-16
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
8-17
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
00
(1800/1900-1800/1900)
Handover
1278079439 CELL.INTRABSC.OUTC
ELL.HO.CMD.TCHF.NO
T.INCLUDE.DR.900.180
0
HUAWEI I
Handover
1278079440 CELL.INTRABSC.OUTC
ELL.HO.CMD.TCHF.NO
T.INCLUDE.DR.1800.90
0
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
8-18
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI II
Handover
Direct Retry
8-19
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
Direct Retry
HUAWEI II
Handover
Direct Retry
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278079471 CELL.INTRABSC.OUTC
ELL.HO.FAIL.EXP.TCHF
.TRAF.NOT.INCLUDE.D
R
H3127Ca:Number of
GBFD-110601
Unsuccessful Outgoing
GBFD-510501
Internal Inter-Cell Handovers
(Timer Expired) (TCHF)
(Traffic Channel)
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
8-20
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
1278079474 CELL.INTRABSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.UNS
H312Da:Number of Failed
GBFD-110601
Outgoing Internal Inter-Cell GBFD-510501
Handovers (Reconnection to
Old Channels) (Abnormal
Release, Unspecified)
HUAWEI I
Handover
1278079475 CELL.INTRABSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.CHN
H312Db:Number of Failed
GBFD-110601
Outgoing Internal Inter-Cell GBFD-510501
Handovers (Reconnection to
Old Channels) (Abnormal
Release, Channel
Unacceptable)
HUAWEI I
Handover
1278079476 CELL.INTRABSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.EXP
H312Dc:Number of Failed
GBFD-110601
Outgoing Internal Inter-Cell GBFD-510501
Handovers (Reconnection to
Old Channels) (Abnormal
Release, Timer Expired)
HUAWEI I
Handover
1278079477 CELL.INTRABSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABN.RE
L.NO.ACT
H312Dd:Number of Failed
GBFD-110601
Outgoing Internal Inter-Cell GBFD-510501
Handovers (Reconnection to
Old Channels) (Abnormal
Release, No Activity on the
Radio Path)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-21
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Cleared)
1278079483 CELL.INTRABSC.OUTC H312Dj:Number of Failed
GBFD-110601
ELL.HO.FAIL.RECONN. Outgoing Internal Inter-Cell GBFD-510501
SUCC.MS.RPT.SEMANT Handovers (Reconnection to
Old Channels) (Semantically
Incorrect Message)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278079489 CELL.INTRABSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.PROTO
CL
H312Dp:Number of Failed
GBFD-110601
Outgoing Internal Inter-Cell GBFD-510501
Handovers (Reconnection to
Old Channels) (Protocol Error
Unspecified)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-22
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
8-23
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
8-24
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-25
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-26
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-27
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
L.HO.CMD.SD.900.900
Responses (SDCCH)
(900/850/810-900/850/810)
GBFD-510501
Handover
GBFD-110608
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
Issue 04 (2012-06-30)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
8-28
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-29
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
(SDCCH)
GBFD-110608
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
SDCCH
Issue 04 (2012-06-30)
8-30
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278080467 CELL.INTERBSC.INCEL CH343:Successful Incoming GBFD-110601
L.HO.SUCC
External Inter-Cell Handovers GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278080473 CELL.INTERBSC.INCEL CH342C:Failed Incoming
GBFD-110601
L.HO.FAIL.EXP
External Inter-Cell Handovers GBFD-510501
(Timer Expired)
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
8-31
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-510501
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-32
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
D.OTHER.FAIL
GBFD-510501
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
GBFD-110608
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
8-33
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
SDCCH
Handover
GBFD-110601
GBFD-110601
1278081426 CELL.INTERBSC.OUTC
ELL.HO.CMD.TCHF.NO
T.INCLUDE.DR.1800.18
00
H3317X:Outgoing External
Inter-Cell Handover
Commands (TCHF)
(Excluding Directed Retry)
(1800/1900-1800/1900)
GBFD-110601
1278081427 CELL.INTERBSC.OUTC
ELL.HO.CMD.TCHF.NO
T.INCLUDE.DR.900.180
0
H3317Y:Outgoing External
Inter-Cell Handover
Commands (TCHF)
(Excluding Directed Retry)
(900/850/810-1800/1900)
GBFD-110601
1278081428 CELL.INTERBSC.OUTC
ELL.HO.CMD.TCHF.NO
T.INCLUDE.DR.1800.90
0
H3317Z:Outgoing External
Inter-Cell Handover
Commands (TCHF)
(Excluding Directed Retry)
(1800/1900-900/850/810)
GBFD-110601
GBFD-510501
GBFD-110608
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-110607
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
GBFD-110601
GBFD-510501
GBFD-110607
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
GBFD-110601
GBFD-510501
GBFD-110607
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI I
8-34
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-510501
Handover
GBFD-110607
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-35
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-510501
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-36
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
8-37
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
ELL.HO.CMD.TA
GBFD-510501
Inter-Cell Handover
Commands (Timing Advance)
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
Feature Name
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-38
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-39
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-40
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
and MSC)
Feature Name
Handover
HUAWEI I
Handover
1278081503 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.UNS
H332Da:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Abnormal
Release, Unspecified)
HUAWEI I
Handover
1278081504 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.CHN
H332Db:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Abnormal
Release, Channel
Unacceptable)
HUAWEI I
Handover
1278081505 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABNOR
M.REL.EXP
H332Dc:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Abnormal
Release, Timer Expired)
HUAWEI I
Handover
1278081506 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.ABN.RE
L.NO.ACT
H332Dd:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Abnormal
Release, No Activity on the
Radio Path)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-41
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Unavailable)
1278081511 CELL.INTERBSC.OUTC H332Di:Failed Outgoing
GBFD-110601
ELL.HO.FAIL.RECONN. External Inter-Cell Handovers GBFD-510501
SUCC.MS.RPT.CALL.CL (Reconnection to Old
R
Channels) (Call Already
Cleared)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278081514 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.MSG.TY
PE.NEXIST
H332Dl:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Message Type
Non-Existent or Not
Implemented)
HUAWEI I
Handover
1278081515 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.MSG.TY
PE.NC
H332Dm:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Message Type
Not Compatible with Protocol
State)
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
1278081518 CELL.INTERBSC.OUTC
ELL.HO.FAIL.RECONN.
SUCC.MS.RPT.PROTO
CL
H332Dp:Failed Outgoing
GBFD-110601
External Inter-Cell Handovers GBFD-510501
(Reconnection to Old
Channels) (Protocol Error
Unspecified)
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-42
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
8-43
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
SDCCH
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Local Multiple
Signaling
Points
Issue 04 (2012-06-30)
8-44
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-510501
GBFD-115301
HUAWEI II
Handover
Local Multiple
Signaling
Points
HUAWEI I
Handover
HUAWEI II
Handover
Local Multiple
Signaling
Points
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI I
8-45
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
GBFD-110601
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-46
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
ELL.HO.FAIL.T7.EXP
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
Feature Name
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
1278084418 CELLCELL.INCELL.HO. H382A:Failed Incoming
FAIL.CONG
Inter-Cell Handovers
(Congestion)
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Issue 04 (2012-06-30)
8-47
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278085424 CELLCELL.OUTCELL.C H371H:Outgoing Inter-Cell
GBFD-110601
MD.RAPID.LEV.DROP Handover Commands (Rapid GBFD-510501
Level Drop)
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
8-48
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
MD.OTHER
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
Feature Name
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
8-49
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-110607
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-50
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Issue 04 (2012-06-30)
HUAWEI II
Handover
8-51
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-510501
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278085471 CELLCELL.OUT.CELL.H H373G:Successful Outgoing GBFD-110601
O.SUCC.TIMES.MSC.IN Inter-Cell Handovers (MSC
GBFD-510501
TERVENTION
Intervention)
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
8-52
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Causes)
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-110601
1278086434 CELL.HO.UL.LEV.AVG
GBFD-110601
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
AS330C:Mean Uplink
Receiving Level during
Handover Initiation
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Issue 04 (2012-06-30)
8-53
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-510501
HUAWEI II
Handover
1278269453 CELL.DL.MR.NUM
S373:Number of Downlink
MRs
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278269459 CELL.SCELL.MR.NUM
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
8-54
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110801
Processing of
Measurement
Report
GBFD-110802
Pre-processin
g of
Measurement
Report
1278271432 CELL.UL.SIG.QLTY.AVR AS326A:Mean Quality of
Uplink Signals
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
Processing of
Measurement
Report
Pre-processin
8-55
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Issue 04 (2012-06-30)
GBFD-110801
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-56
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
LTY.7
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
8-57
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-58
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Rank 4)
Feature Name
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-59
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
8-60
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Issue 04 (2012-06-30)
GBFD-110801
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-61
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
LTY.0
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
8-62
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-63
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Rank 5)
Feature Name
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-64
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
GBFD-110801
Processing of
Measurement
Report
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
8-65
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
8-66
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
X.QLTY.1
GBFD-110802
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
8-67
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
8-68
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Quality Rank 6)
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
Feature Name
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-69
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Feature ID
Feature Name
GBFD-110801
Processing of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
Counter Description
GBFD-110802
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
8-70
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
8-71
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
X.QLTY.2
GBFD-110802
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
8-72
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
8-73
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Quality Rank 7)
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
GBFD-110801
Issue 04 (2012-06-30)
Feature Name
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
8-74
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110801
Processing of
Measurement
Report
GBFD-110801
GBFD-110802
Pre-processin
g of
Measurement
Report
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
Issue 04 (2012-06-30)
8-75
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
GBFD-110801
Processing of
8-76
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Y.3.AVR
GBFD-110802
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
GBFD-110801
GBFD-110802
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276417 TRX.BALANCE.LEV.1
S462A:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 1)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276418 TRX.BALANCE.LEV.2
S462B:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 2)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Issue 04 (2012-06-30)
8-77
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
1278276419 TRX.BALANCE.LEV.3
S462C:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 3)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276420 TRX.BALANCE.LEV.4
S462D:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 4)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276421 TRX.BALANCE.LEV.5
S462E:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 5)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276422 TRX.BALANCE.LEV.6
S462F:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 6)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276423 TRX.BALANCE.LEV.7
S462G:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 7)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276424 TRX.BALANCE.LEV.8
S462H:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 8)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278276425 TRX.BALANCE.LEV.9
Issue 04 (2012-06-30)
S462I:Number of MRs
GBFD-110801
(Uplink-and-Downlink Balance GBFD-110802
Level = 9)
Processing of
Measurement
Report
8-78
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277417 TRX.MR.NUM.BY.TA.0
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277418 TRX.MR.NUM.BY.TA.1
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277419 TRX.MR.NUM.BY.TA.2
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277420 TRX.MR.NUM.BY.TA.3
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
8-79
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
1278277421 TRX.MR.NUM.BY.TA.4
Feature ID
Feature Name
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277422 TRX.MR.NUM.BY.TA.5
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277423 TRX.MR.NUM.BY.TA.6
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277424 TRX.MR.NUM.BY.TA.7
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277425 TRX.MR.NUM.BY.TA.8
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
1278277426 TRX.MR.NUM.BY.TA.9
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
Issue 04 (2012-06-30)
8-80
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
Processing of
8-81
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
= 17)
GBFD-110802
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Issue 04 (2012-06-30)
8-82
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
Processing of
Measurement
Report
8-83
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
8-84
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Issue 04 (2012-06-30)
8-85
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
8-86
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
8-87
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
8-88
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Feature ID
Feature Name
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
Counter Description
8-89
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Feature ID
Feature Name
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
Counter Description
8-90
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
1278287417 TRX.RQI.NUM.0.TO.1
S4400E:Number of
GBFD-115504
Measurement Reports (RQI =
0 to 1)
AMR FR/HR
Dynamic
Adjustment
1278287418 TRX.RQI.NUM.1.TO.2
S4401E:Number of
GBFD-115504
Measurement Reports (RQI =
1 to 2)
AMR FR/HR
Dynamic
Adjustment
1278287419 TRX.RQI.NUM.2.TO.3
S4402E:Number of
GBFD-115504
Measurement Reports (RQI =
2 to 3)
AMR FR/HR
Dynamic
Adjustment
1278287420 TRX.RQI.NUM.3.TO.4
S4403E:Number of
GBFD-115504
Measurement Reports (RQI =
3 to 4)
AMR FR/HR
Dynamic
Adjustment
1278287421 TRX.RQI.NUM.4.TO.5
S4404E:Number of
GBFD-115504
Measurement Reports (RQI =
4 to 5)
AMR FR/HR
Dynamic
Adjustment
1278287422 TRX.RQI.NUM.5.TO.6
S4405E:Number of
GBFD-115504
Measurement Reports (RQI =
5 to 6)
AMR FR/HR
Dynamic
Adjustment
1278287423 TRX.RQI.NUM.6.TO.7
S4406E:Number of
GBFD-115504
Measurement Reports (RQI =
6 to 7)
AMR FR/HR
Dynamic
Adjustment
1278287424 TRX.RQI.NUM.7.TO.8
S4407E:Number of
GBFD-115504
Measurement Reports (RQI =
7 to 8)
AMR FR/HR
Dynamic
Adjustment
1278287425 TRX.RQI.NUM.8.TO.9
S4408E:Number of
GBFD-115504
Measurement Reports (RQI =
8 to 9)
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
Issue 04 (2012-06-30)
8-91
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
AMR FR/HR
Dynamic
Adjustment
1278287436 TRX.RQI.NUM.GT.55
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
GBFD-115504
AMR FR/HR
Dynamic
Adjustment
S4419E:Number of
Measurement Reports (RQI
greater than 55)
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
Processing of
Measurement
Report
8-92
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Issue 04 (2012-06-30)
8-93
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
Issue 04 (2012-06-30)
8-94
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-95
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-110601
1278700447 BSCRPT.HO.REQ.TA
GBFD-110601
Issue 04 (2012-06-30)
ZCH970E:Attempted
Handovers per BSC (Timing
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
8-96
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Advance)
Feature Name
HUAWEI II
Handover
HUAWEI I
Handover
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
GBFD-115504
HUAWEI I
Handover
HUAWEI II
Handover
AMR FR/HR
Dynamic
Adjustment
1278700457 BSCRPT.HO.REQ.DR
ZCH9701:Attempted
GBFD-110601
Handovers per BSC (Directed GBFD-510501
Retry)
GBFD-110607
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-97
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-110601
HUAWEI I
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-510501
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
8-98
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
GBFD-115504
HUAWEI II
Handover
AMR FR/HR
Dynamic
Adjustment
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
8-99
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278703567 BSCRPT.INTRACELL.H ZCH301:Internal Intra-Cell
O.CMD
Handover Commands per
BSC
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
HUAWEI II
Handover
8-100
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
per BSC
1278703573 BSCRPT.INTRABSC.INC ZK3190:Incoming Internal
ELL.HO.CMD
Inter-Cell Handover
Commands per BSC
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278703582 BSCRPT.KPI.DUBAND. ZK3173:Successful
HO.SUCC
Dual-Band Handovers per
BSC
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-101
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
HUAWEI I
Handover
HUAWEI II
Handover
Local Multiple
Signaling
Points
HUAWEI I
Handover
HUAWEI II
Handover
Local Multiple
Signaling
Points
GBFD-110601
GBFD-510501
GBFD-115301
HUAWEI I
Handover
HUAWEI II
Handover
Local Multiple
Signaling
Points
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI II
Handover
8-102
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
SUCC.RATE
Feature ID
Feature Name
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI II
Handover
HUAWEI I
Handover
HUAWEI I
Handover
HUAWEI I
Handover
GBFD-110601
GBFD-510501
HUAWEI II
Handover
HUAWEI II
Handover
HUAWEI II
Handover
1278706449 BSCRPT.FR.UP.RX.QLT ZS4180SA:Number of MRs on GBFD-110801
Y.0.AVR
Uplink TCHF (Mean Receive GBFD-110802
Quality Rank 0) per BSC
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
Issue 04 (2012-06-30)
8-103
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Pre-processin
g of
Measurement
Report
Processing of
Measurement
Report
Processing of
Issue 04 (2012-06-30)
Pre-processin
g of
Measurement
Report
8-104
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
QLTY.1.AVR
GBFD-110802
Downlink TCHF (Mean
Receive Quality Rank 1) per
BSC
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Processing of
Measurement
Report
Issue 04 (2012-06-30)
Feature ID
Feature Name
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
Report
Pre-processin
g of
Measurement
8-105
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Report
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
HUAWEI I
Handover
HUAWEI II
Handover
Direct Retry
1282429839 CELL.NO.DL.MR.NUM
CS3032:Number of
Measurement Reports
Without DL Measurement
Information
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-110601
HUAWEI I
8-106
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
L.HO.REQ.TCH
GBFD-510501
Handover
HUAWEI II
Handover
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
GBFD-110601
Issue 04 (2012-06-30)
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
GBFD-510501
HUAWEI I
Handover
HUAWEI II
8-107
GSM BSS
Handover
Counter ID
8 Counters
Counter Name
Counter Description
Feature ID
Feature Name
Handover
Issue 04 (2012-06-30)
GBFD-110601
GBFD-510501
HUAWEI I
Handover
HUAWEI II
Handover
8-108
GSM BSS
Handover
9 Glossary
9 Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
Issue 04 (2012-06-30)
9-1
GSM BSS
Handover
10 Reference Documents
10 Reference Documents
[1] 3GPP TS 08.58 Base Station Controller - Base Transceiver Station (BCS-BTS) Interface Layer 3
Specification
[2] 3GPP TS 04.08 Mobile radio interface layer 3 specification
[3] BSC6900 Feature List
[4] BSC6900 Basic Feature Description
[5] BSC6900 Optional Feature Description
[6] BSC6900 GSM Parameter Reference
[7] BSC6900 GSM MML Command Reference
[8] BSC6900 Performance Counter Reference
Issue 04 (2012-06-30)
10-1