Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LM2950
Features
-
TO-92
Applications
ORDERING INFORMATION
DEVICE
PKG
LM2950L-XX
TO-92
PRODUCT DESCRIPTION
The LM2950 is a low power voltage regulator. This device excellent choice for use in battery powered
application such as cordless telephone, radio control systems, and portable computers.
The LM2950 features very low quiescent current (75 Typ.) and very low drop output voltage
(Typ. 40 at light load and 380 at 100).
This includes a tight initial tolerance of 0.5% Typ., extremely good load and line regulation of 0.05% Typ.,
and very low output temperature coefficient, making the LM2950 useful as a low-power voltage reference.
The error flag output feature is used as power-on reset for warn of a low output voltage, due to
following batteries on input. Other feature is the logic-compatible shutdown input which enable the
regulator to be switched on and off. The LM2950 is available in 8-pin plastic packages.
The regulator output voltage may be pin-strapped for a -XX volt or programmed from 1.24 volt to 29 volts
with external pair of resistors. The LM2950 is offered in 3-pin to-92 package compatible with other
fixed regulator.
INPUT
VOUT
OUTPUT
+
-
+1.23V
ERROR
AMPLIFIER
REFERENCE
100
MAX
+
1
60K
GROUND
HTC
1
LM2950
POWER DISSIPATION
260
-65 to +150
-55 to +150
-0.3 to +30V
-1.5 to +30V
-0.3 to +30V
-0.3 to +30V
CONDITIONS (Note 2)
MIN
-25 TJ 85
0.985V0
0.980V0
0.976V0
TYP
V0
V0
MAX
UNITS
1.015V0
1.020V0
1.024V0
(Note 1)
V0+1VVIN30V
50
150
ppm/
0.04
0.4
100IL 100
0.1
0.3
IL =100
50
80
IL =100
380
450
IL =100
75
120
IL =100
12
VIN=V0-0.5V, IL =100
110
170
Current Limit
VOUT=0
160
200
0.05
0.2
%/W
Thermal Regulation
CL =1
Output Noise, 10Hz to 100kHz
430
CL =200
160
CL =3.3
100
Vr
(Bypass=0.01 pins 7 to 1
Error Comparator
Output Leakage Current
VOH=30V
0.01
1.0
VIN=4.5V, IOL=400
150
250
(Note 6)
(Note 6)
75
Hysteresis
(Note 6)
15
40
60
95
Shutdown Input
Input Logic Voltage
Shutdown Pin Input Current
1.3
0.7
2
30
50
450
600
10
3.3VVOUT5.0V
20
2.0VVOUT3.3V
30
Note 1 : Output or reference voltage temperature coefficients defined as the worst case voltage change divided by the
total temperature range.
Note 2 : Unless otherwise specified all limits guaranteed for T J=25, VIN=V0+1V, IL =100 and C L =1. Additional condition
for the 8-pin versions are feedback tied to -XX V tap and output tied to output Sense (V OUT=XX V) and
VSHOUTDOWN0.8V
Note 3 : Regulations is measured at constant junction temperature, using pulse testing with a low duty cycle.
Changes in output voltage due to heating effects are covered under the specification for thermal regulation.
HTC
2
LM2950
Note 4 : Dropout voltage is defined as the input to output differential at which the output voltage drops 100
below its nominal value measured at 1V differential. At very low values of programmed output voltage,
the minimum input supply voltage(2.3V over temperature) must be taken into account.
Note 5 : V REFVOUT(VIN-1V), 2.3VV IN30V, 100I L100, T JTJMAX
Note 6 : Comparator thresholds are expressed in terms of a voltage differential at the feedback terminal below the
nominal reference voltage measured at V 0+1V input. To express these thresholds in terms of output voltage changed,
multiply by the error amplifier gain=V OUT/VREF=(R1+R2)/R2. For example, at a programmed output voltage of 5V, the
error output is guaranteed to go low when the output drops by 95x5V/1.235V=384. Thresholds remain constant
as a percent V OUT as VOUT is varied, with the dropout warning occurring at typically 5% below nominal, 7.5%
guaranteed.
Note 7 : V SHUTDOWN2V, V IN30V, V OUT=0, Feed-back pin tied to -XX V Tap.
HTC
3
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn