Sei sulla pagina 1di 28

Well, with an extremely productive year behind us, we

begin 2006 with great optimism. As the MTS Series


continues to evolve and grow with great momentum, this
is the year we solidify ourselves as a leader in high gain
amplification for years to come. Why, do you ask? Well,
for the past year we have been developing a new power
circuit called Valve-DynamicTM, which now elevates hybrid
guitar amplification to a much higher level of development.
With a great design team lead by amp guru Bruce
Egnater, the vast tone barrier between tube and solidstate is much closer to being broken than it ever has
before. In a nutshell, this revolutionary new Tube-driven
MOSFET power circuit encompasses the true sonic feel,
percussion, and dynamic tone of a full tube power amp
without the costly power tube failures and tone
inconsistencies. Initially this Valve-DynamicTM circuit was
developed to power only the new V2 and T2 amplifiers,
but because the level of tone and performance has
exceeded even our expectations, we decided it
was too groundbreaking for just two amplifiers so we
stuck it in the monstrous new G3 Series as well.
This great addition strengthens our product line by giving
us a new proprietary technology that will continue to
grow and expand within our products. In 2006, you can
look for continued expansion of our MTS series, as well
as new guitar and bass products that will be added to
the G3 series.
Last but not least, I wanted to thank everyone who was involved with our success and growth in 2005, which
includes you the Randall customer, who continued to support our products in studios, rehearsal spots, and on
stages all around the world. We are forever committed to giving you a better sounding and better performing product.
Doug Reynolds
Director of Randall Amplification

MTS Series ................ ..3


XL Series ......................11
Tube Series ................15
G3 Series ....................17
RX Series ....................21
Apparel .....................23
Accessories ..............24
Artists ..........................25

RM4
4-Channel Module
tube preamp
3-12AX7 tubes
Parallel loop
w/front panel mix control
Series loop
Pre/post outputs
Ground lift
MIDI in/thru
World Voltage selector
RF4 MIDI footswitch
(optional-RF4)

The Ultimate Rack and Recording Tool, this 4-channel preamp provides all the tonal flexibility of any
digital modeling amp or software program, but does it with 100% all-tube circuitry for tracking or playing with
real tone. The RM4 also allows you to hot swap and customize any combination of the available classic to
modern real tube tones. Don't dream of having your ultimate collection of tube amps, it's all available in the
RM4 modular tube preamp.

RT2-50
2-channel Mono/Stereo
tube power amp
Channel 1:
2 x 6L6GC power tubes
Channel 2:
2 x E34L power tubes
Front panel tube
bias section
50/50 watt Mono mode:
Switches between
channel 1 & 2
100 watt Stereo mode:
Both channels are on
Dual Master Volume controls
Dual Density controls
Dual Presence controls
MIDI in/Thru
World Voltage selector

The Standard in Tube Power Amplification! Designed to compliment the RM4 or any MIDI capable guitar
preamp, the MIDI switching RT2/50 stereo tube power amp provides unmatched flexibility by allowing you
to choose and switch between different power tubes, then match them to your favorite preamp tone.
Channel 1 one comes standard with two 6L6 power tubes, and Channel 2 is stocked with a pair of EL34's.
Choose between the 50W channel switching MONO mode or full 100W STEREO mode. The RT2/50 also works
perfectly with any MIDI switching digital guitar preamp by providing needed warm tube power to any tone.

2 X EL34s
EACH CHANNEL CONTAINS MASTER
VOLUME, PRESENCE, AND DENSITY
CONTROLS

FRONT PANEL TUBE BIAS SECTION


WITH TUBE FAILURE LEDS, TEST POINTS
AND INDIVIDUAL BIAS ADJUSTMENTS

2 X 6L6s

ULTRA
Extreme hi-gain with tight low end and liquid sustain. This one exemplifies the
90's Randall trademark sound and is perfect for any classic to modern metal tone.

ULTRA XL
A more modern version of our legendary hi-gain tone, the new Ultra XL has massive amounts of liquid
gain combined with huge bottom end and cutting upper mid-range. A true legend in the making!

ULTRA LEAD
A high gain lead tone with rich harmonic sustain. Great solo and lead module with thick
mid-range, its a perfect lead tone for the modern progressive shredder.

RECTIFIED New for 2006


Based on the preamp circuit of a Mesa/Boogie Dual Rectifier, this preamp has cutting
tone with strong mid-range. It has defined the modern day rock and Nu-Metal tone.)
JTM
Based on the preamp circuit of a classic Marshall JTM45, this preamp is a classic mid-gain tone with good
bottom end. Similar gain structure and low end to that of the Tweed, but voiced with more of the classic Brit sound

TWEED
Based on the preamp circuit of a '59 Fender Bassman, this preamp is perfect for the standard blues tone. It has a
huge bottom end and nice bite in the gain circuit. Perfect for classic SRV tone. Pairs great with single coil pickups

BLACKFACE
Based on the preamp circuit of a Fender Blackface Twin, this legendary clean tone has
cutting mid-range and sparking highs. The standard for a wide-range of cleans.

You choose the tones! With


fourteen standard modules
& f i ve n ew s i g n a t u re
preamp modules to choose
from, having a new amp is
as simple as plugging in a
new module. Start with as
few as one, or as many as
you like and have all your
favorite tones right at your
fingertips. All modules can
be used for the RM4 preamp,
RM combos and RM heads.
All modules utilize the same
panel layout, which includes
Gain, Bass, Mid, Treble and
Volume controls.

DLX
Based on the preamp circuit of a Fender Blackface Deluxe, this tone bleeds country music. Great mid-range and
top end spank,with a bit more gain and bite than the Blackface Twin. Again, pairs great with single coil pickups

CLEAN
A very warm, robust clean tone that is perfect clean for any jazz and blues style guitarist, or any guitarist looking
for a smoother clean sound. Not as harsh when using single coil pickups as the typically Blackface tone

SL+
Based on the preamp circuit of a hot-rodded Marshall Super Lead, weve added
a bit more gain and punch. It will handle anything from Zeppelin to Zakk.

PLEXI
Based on the preamp circuit of a classic Marshall Plexi, this signature tone covers anywhere
from Page, to Angus, to Gibbons. This is the tone that defines the 70's rock and punk tone.

TOP BOOST
Based on the preamp circuit of a Vox AC30TB, it has a little more kick in the gain circuit than a traditional AC30.
This preamp has sparkling hi-end that will handle anything from classic Petty, to Brian May to modern Lenny Kravitz.

A bright switch is included


directly under each Bass
control.
Each
preamp
module houses two 12AX7
tubes which can be easily
changed or replaced. Use
the thumbscrews to remove
or secure each module to
the front panel of every
MTS amplifier.

BROWN
The classic hi-gain brown sound! A basic hot-rodded Plexi circuit with thicker mid-range sustain to cut through the mix,
this module works great for early EVH and the standard 70's rock tone, as well as dirt tone from the early 90's grunge era.

XTC
Based on the preamp circuit of a Bogner Ecstasy red channel, the XTC is an all-around great hi-gain tone
with tight low end and cutting mid-range. It will cover any rock to metal tone. This one screams!

SUPER V (George Lynch Signature Module)


A clean module with Vox like tone characteristics. Nice chime on the high's with
warm low bottom end. Sounds very acoustic like due to reduced mid-range.
BRAHMA (George Lynch Signature Module - Not Shown )
A mouth watering classic hi-gain tone that represents George's signature rhythm sound.This preamp has the classic
British voicing with signature American tone modifications. It's a Lynch's variation of the vintage Plexi tone.
MR. SCARY (George Lynch Signature Module)
What we've all been waiting for! It's the patented Lynch heavy rhythm and lead tone of
Dokken and Lynch Mob era. It has similar voicing to that of the Brahma with addition gain and punch.
The standard 80's high gain tone with tight low end and impressive gain.
GRAIL (George Lynch Signature Module)
A modern Lynch lead and rhythm tone. A true Rectifier feel with thicker lower mid-range
than the "Mr. Scary" preamp, A modern lead tone from the Lynch Mob to current era
1086 (Dan Donegan Signature Module)
A cutting modern hi-gain tone with more gain and voicing options than any of our other preamps. Extremely tight & defined
pick attack that will cover both Plexi to Rectified guitar tones. This preamp includes new gain boost and voicing switches.

RM100M
3 Modular Channels
100 Watts all tube
JJ E34L power tubes
Master Volume
Master Presence
Master Density
Series loop
Parallel loop
(w/front panel mix control)
MIDI in/thru
Rear panel tube
bias section
World Voltage selector
RF3 MIDI footswitch
included

A Head With No Rival, our flagship tube head continues to revolutionize the industry while setting a
benchmark of how future tube heads are designed. The highly advanced RM100 heads are traditional and
modern technology rolled into one amplifier. First, you have 3 independent modular channels that can be
loaded with your choice and combination of the available tube preamp modules. Load each channel with
a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed.
Don't purchase an amplifier because you like only its clean or hi-gain tone. Build this amp with your clean,
your rhythm, and your hi-gain tone for a complete custom set up. With nearly two dozen tube
preamps now available, chances are youll have a hard time picking just three!

RM100M2
An RM100M factory loaded
with Blackface, Plexi, and
XTC modules installed.

RM100M1
An RM100M factory loaded
with Clean, Recto,
and Ultra preamps

RM100

TUBE BIAS SECTION WITH


T U B E FAILURE LEDS, HOT
TEST POINTS, AND INDIVIDUAL
BIAS ADJUSTMENTS

RM100S
3 Modular Channels
100 Watts all tube
Factory loaded with
Blackface, Plexi, and XTC
preamps
JJ 6L6GC power tubes
Master Volume
Master Presence
Master Density
Series loop
Parallel loop
w/front panel mix control
MIDI in/thru
Rear panel
tube bias section
World Voltage selector
RF3 MIDI footswitch included

RM100S2

RM100CBR

RM100S2
An RM100S factory loaded
with Blackface, Plexi, and
XTC modules installed

RM100BR
Same specifications
as the RM100S
Limited edition black
retro cosmetics
Silver piping on black
leather vinyl

The RM100 head is also available with optional


cosmetics. The unloaded RM100S comes loaded
as the RM100S2 with Blackface, Plexi, and XTC
tube preamps, where the new RM100CBR is only
available unloaded. Both share the RM100M
specifications with the exception that both come
loaded with 6L6 power tubes instead of E34Ls.

R412CBR

Lynch Box-RM
3 Modular Channels
100 Watts all tube
JJ E34L power tubes
Custom Dark Forest
Alligator vinyl
Gold piping
Master Volume
Master Presence
Master Density
Series loop
Parallel loop w/front panel
mix control
MIDI in/thru
Rear panel tube bias section
World Voltage selector
MIDI footswitch included

Introducing the new George Lynch Signature Series Lynch Box head and cabinet. Reunited as partners after
nearly two decades, we launch the new Lynch Box 100 Watt modular tube head. Designed and based
around the current RM100 electronics, the new Lynch Box embodies all of Lynchs legendary signature guitar
tones from the past to the present. Choose between his four new signature tube preamps, each capturing a
span of his illustrious career, and then simply load them into any of the three channels.

Specifications subject to artist changes

RS412LB (4 x 12)
300 Watts RMS
Void-free birch plywood
construction
Custom Eminence built
Cast-Frame Speaker
Straight front
Rear slot port
Custom Dark Forest
Alligator vinyl
Gold piping
14 locking input jack
8 ohm mono

To reproduce the Lynch Box tone, George developed the exact


cabinet specifications he was looking for, resulting in a huge
sounding cabinet with thick smooth mid-range and defined highs.
This new slightly oversized rear port cabinet is constructed by hand
using a combination of void-free birch plywood and high density
fiberboard for a tight projecting tone. If youre a fan of the Lynch
tone this is the amp and cab youve been waiting for.
7

RM50HB
2-Module - 50 Watt head
6L6 power tubes
Master volume
Presence
Density
Series loop
Parallel loop w/mix control
Accutronics spring reverb
Rear tube bias section
Slave out
Master volume input.
Footswitch included

Great as a club workhorse and an ultra flexible studio tool, the smaller RM50 and RM20 heads can produce
any tone you need, with still plenty power for any gig. The single channel RM20HB comes unloaded from the
factory, so you need to choose the tones you need available, where two channel RM50HB comes factory
loaded as the RM50HB2, with a Blackface and Plexi tube preamp, or unloaded as the RM50HB.

RM50HB2
Same as above loaded
with Blackface and
Plexi modules

RM20HB
Single Ch. - 15 watt head
EL84 power tubes
Tube boost function
w/Gain and Level controls
Master Presence
Master Density.
Live mode or Silent mode
for direct recording
"Mic Eliminator" XLR output
Series Effects loop
Tube bias section
Includes boost footswitch.

RM50

RM20HB

R112CBG

(Small 1 x 12)

25 Watts RMS
34 birch plywood
construction
Celestion Greenback
speaker
8 ohm mono

R112CBG
8

RM100C
3 Modular Channels
100 Watts all tube
Factory loaded with
Clean, Recto, and Ultra preamps
JJ E34L power tubes
2 x 12" Celestion G12T-75's
Master Volume Master Presence
Master Density
Series loop
Parallel loop w/front panel
mix control
MIDI in/thru
Rear panel tube bias section
World Voltage selector
RF3 MIDI footswitch included

A Workingman's Dream! The smaller but mighty RM50 & RM20 modular combos provide the flexibility to
have any combination of classic to modern tones, simply by plugging in your choice of MTS tube preamp
modules. Perfect for the weekend warrior or club professional, the RM50 is perfect for the player looking for
an all tube amplifier with multiple tones. The smaller RM20 designed specifically for the professional gigging
and recording musician, this EL84 powered combo performs equally well on stage or in the studio. This
model includes the Mic Eliminator direct output circuit as well as a speaker on/off Standby switch for
silent recording to lay down real authentic tube guitar tracks without disturbing the neighbors.

RM100C2
An RM100C factory loaded
with Blackface, Plexi, and
XTC modules installed
RM100C1
An RM100C factory loaded
with Clean, Recto, and Ultra
preamps
RM50B
2-Module,
50 Watt combo
12" Celestion G12T-75
6L6 power tubes
Master volume Presence
Density
Series loop
Parallel loop w/mix control
Accutronics spring reverb
Rear tube bias section
Slave out
Master volume input
Footswitch included

RM100C

RM50B2
Same as RM50B
Factory loaded with
Blackface and Plexi modules

RM100C (Back)

RM50S
Same as RM50B with
Titanium silver grill cloth
RM50S2
Same as the RM50S
Factory loaded with
Blackface and Plexi modules
RM20B
Single Ch.
15 watt combo
12" Celestion Greenback
EL84 power tubes
Tube boost function
w/Gain and Level controls
Master Presence Master Density
Choose Live mode/Silent mode
for direct recording
"Mic Eliminator" XLR output
Series Effects loop
Tube bias section
Includes boost footswitch

RM50B
9

RM20B

R412CB (4 x 12)

The impeccable cabinet line made to compliment the most flexible tube amps on the planet. All MTS
cabinets are hand crafted in-house out of the highest quality, void-free 3/4" Canadian birch. Each
cabinet comes stock with Celestion Vintage 30's or choose the combination Vintage 30/G12T-75 X-pattern.
All XL Series cabinets come equipped with our exclusive XLR "Mic EliminatorTM" direct output circuit for
direct recording or live applications.

240 Watts RMS


34 birch plywood
construction
Celestion Vintage 30 speakers
Straight front w/angled baffle
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
4/16 mono/8 stereo Inputs

R412CBR (4 x 12)
Same as R412CB
With retro cosmetics

R412CS (4 x 12)
Same as R412CB
With silver titanium front

R212CB (2 x 12)
120 Watts RMS
34 birch plywood
construction
Celestion Vintage 30 speakers
Straight front w/angled baffle
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
8 ohm mono/4 stereo Inputs

R212CS (2 x 12)
Same as R212CB
With silver titanium front

R212NXT (2 x 12)

R412CB

R412CS

Same as R212CB
With Celestion Neodymium
speakers

R112CB (1 x 12)
60 Watts RMS
34 birch plywood
construction
Celestion Vintage 30 speakers
8 ohm mono

R112CS (1 x 12)
Same as R112CB
With silver titanium front

R112CBG

(Small 1 x 12)

25 Watts RMS
34 birch plywood
construction
Celestion Greenback
speaker
8 ohm mono

R212CB

R112CBG
10

V2
3-channel head
w/dual preamps:
Channel 1:
Classic solid-state clean
Channel 2:
Classic Randall overdrive
w/sustain boost
Channel 3:
All-tube preamp with
Attack" & "Bright
New 400W "Valve-Dynamic"
Tube/Mosfet power section
500W @ 2 ohms
400W @ 4 ohms
280W @ 8 ohms
MIDI assign-able 6-band
Graphic EQ
MIDI assign-able Series or
Parallel Effects loop
Master Volume control
Power amp Density control
Power amp Presence control
Slave output w/level
Mic Eliminator Direct
recording/Mix output
World voltage selector
RF5V2 MIDI foot controller
included.

Developed for the guitarist who likes multiple tone shaping options, the highly complex V2 can
basically produce any tone you want utilizing a full tube preamp, as well as our classic Randall
solid-state preamp. Holding true to our hi-gain roots, weve broken the boundaries of modern design
to bring you this highly advanced new take on hybrid guitar amplification.

V2

Powered by a revolutionary and highly innovative power


section called Valve-DynamicTM, this tube driven
MOSFET circuit is the engine that drives the new V2 and T2 guitar
amplifiers. Designed to emulate the true dynamic tone of a
traditional power tube, this highly advanced take on hybrid
amplification not only captures the warmth, feel, and musical
character of full tube amp, but it powers these amps with so
much reactive tone and feel that youd swear it was a full set
of power tubes under the hood. By incorporating a single
12AT7 tube to drive a large MOSFET output section,
Valve-DynamicTM also provides natural compression which
clips extremely soft at higher stage volumes reacting very
much like a pushed power tube.
11

XL SERIES HEADS

Designed with a simple straight ahead front panel layout, the T2 has a shorter, less complex signal
path that produces an extremely powerful, punishing tone. A true 3 mode amplifier, the T2 while
simplistic, provides an extremely wide range of tones to fit any playing style while seriously catering
to those who hunger for gain.

T2

T2
2-channel all-tube preamp
with 3 modes:
Mode 1:
Classic tube Clean
Mode 2:
Classic tube Overdrive
Mode 3:
Modern tube Boost
3-band EQ with sweepable
mid-range control
New 400W
"Valve-Dynamic" power
12AT7 tube driven MOSFET
power circuit
500W @ 2 ohms
400W @ 4 ohms
280W @ 8 ohms
MIDI assign-able Series or
Parallel Effects loop
Master Volume control
Power amp Density control
Power amp Presence control
Slave output w/level
Mic Eliminator Direct
recording/Mix output
World voltage selector
RF4T2 MIDI foot controller
included.

12

RA412XL

(4 x 12)

240 Watts RMS


34 birch plywood construction
Celestion Vintage 30 speakers
Angled front
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XL (4 x 12)
240 Watts RMS
34 birch plywood construction
Celestion Vintage 30 speakers
Straight front
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
4/16 mono/8 stereo Inputs

Traditional design with unmatched performance, this


professional cabinet line is seen on rock and metal
stages all over the world. Each XL and XLT cabinet are
constructed with rugged 3/4" void-free birch plywood,
that Projecting a huge wall of sound, these cabs are
voiced for a focused tight low end with clear defined
highs. A perfect compliment to the V2 and T2 heads. All
XL Series cabinets come equipped with our exclusive
XLR "Mic EliminatorTM" direct output circuit for direct
recording or live applications.

RS412XXL

(Oversized 4 x 12)
240 Watts RMS
34 birch plywood construction
Celestion Vintage 30 speakers
Straight front
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XLX (4 x 12)
240 Watts RMS
34 birch plywood construction
Two Celestion Vintage 30 speakers
Two Celestion G12T -75's
Straight front
Exclusive "Mic Eliminator"
Mono/Stereo
XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XL
(Shown with V2)

RS125XL (2x12/1x15)
320 Watts RMS
34 birch plywood construction
Two Celestion Vintage 30 speakers
One 15 Eminence Legend
Straight front
8 ohm mono input

RS412XXL

RS125XL
13

R412XLT

(4 x 12)
240 Watts RMS
Celestion Vintage 30 speakers
Straight front w/angled speaker baffle
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

Built to the same high quality XL specifications,


the XLT cabinets add a powder coated metal grill
for serious road protection not to mention the
standout menacing looks.

RS412XLT

(4 x 12)
240 Watts RMS
Celestion Vintage 30 speakers
Straight front
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

R412XLT

RA412XLT

(4 x 12)

240 Watts RMS


Celestion Vintage 30 speakers
Angled front
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XXLT

(Oversized 4 x 12)
240 Watts RMS
Celestion Vintage 30 speakers
Straight front
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

R412XLTX

(4 x 12)
240 Watts RMS
Two Celestion Vintage 30 speakers
Two Celestion G12T -75's
Straight front w/angled speaker baffle
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XLTX

(4 x 12)
240 Watts RMS
Two Celestion Vintage 30 speakers
Two Celestion G12T -75's
Straight front
Protective powder coated metal grill
Exclusive "Mic Eliminator"
Mono/Stereo XLR direct outputs
4/16 mono/8 stereo Inputs

RS412XXLT

RS412XLT
*All XLT cabinets have 34 birch plywood construction

14

RH50T
50 Watts
EL34 power tubes
2 channels tube combo
w/4 modes
Overdrive Channel:
Gain 1(Classic hi-gain)
Gain 2 (modern)
Clean channel
w/boost option
Dual 3-band EQ's
Spring reverb
Effects loop w/level controls
Line out
4-button footswitch
included.

Breaking the barrier for price and performance, the highly flexible and feature heavy Tube Series
incorporates 4 modes of operation in 2 fully independent channels. Channel 1 includes dual Gain stages
for multiple hi-gain rhythm and lead tones, while Channel 2 is a traditional clean tone with sparkly highs
and cutting mid-range. The footswitchable clean boost function adds some grit and volume for a nice
semi-distorted lead tone thats ideal for all styles of country and blues.

RH50T

R412JX
15

RG50TC

Great as a main gigging amp or as a reliable backup, the hardworking RG50TC delivers an array of tones
with dual gain stages on the overdrive channel, as well as a Boost mode on the clean channel. Loaded
with a custom Celestion 80 watt speaker, the RG50TC is built to handle any type of rock, metal, country
and blues.

RG50TC

50 Watts
EL34 power tubes
1 X 12"
Custom 80W Celestion
2 channels tube combo
w/4 modes
Overdrive Channel:
Gain 1 (Classic hi-gain)
Gain 2 (modern)
Clean channel w/boost
option
Dual 3-band EQ's
Spring reverb
Effects loop w/level controls
Line out
4-button footswitch
included

RG50TC
(Back)

16

RH300G3
300 Watt head with new
"Valve-Dynamic" power
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and
Contour controls.
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven MOSFET
power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller
included

Introducing the evolution of hybrid guitar tone. The upgraded G3 Series is now powered by the new
Valve-DynamicTM power circuit providing professional level performance at a practical price. A tonally
sonic improvement to that of the G2 series, the tube driven MOSFET power circuit now adds very responsive
and dynamic tube like qualities to proven amp line. Equipped with the same front and rear panel
features as the G2 series, the new G3 models deliver enhanced bone crushing Randall tone with
unmatched flexibility. So if you're shopping for power, performance, and tone, do yourself a favor and see
what Valve-dynamic can add to your sound.

RH150G3
150 Watt head with new
"Valve-Dynamic" power
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and
Contour controls
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven MOSFET
power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller
included

17

RH300G3

RH150G3

R412CXM

The Best Bang for the Buck in the Business, each CX


and JX cabinet are hand-built with high grade birch
plywood. Designed to compliment the G3 & Tube
Series heads, these cabinets project huge tone and
proven road-worthy construction. Choose the
revolutionary RS125CX with its 15 full-range bottom
woofer for all 7-string and detuned guitars or any CX
and JX cabs for standard 4 x 12 tone. The R212CX is a
perfect companion for any 50 to 100 watt head or
add as on to any of the RG Series combos for
increased volume and tone.

(4 x 12)

320 Watts RMS


34 birch
plywood construction
Celestion Seventy 80
speakers
Straight front
w/angled speaker baffle
Protective metal grill
4/16 mono/8 stereo Inputs

RS125CX

(2x12/1x15)

320 Watts RMS


34 birch
plywood construction
Two Celestion Seventy 80
speakers
One 15 Eminence Legend
Straight front
8 ohm mono input

R412JX

(4 x 12)

300 Watts RMS


34 birch
plywood construction
Custom Eminence
Jaguar speakers
Straight front
w/angled speaker baffle
8 ohm mono input

R412CX

R212CX

(2 x 12)

160 Watts RMS


34 birch
plywood construction
Celestion Seventy 80
speakers
Straight front
8 ohm mono/4 ohm
stereo inputs

R412JX

R412CXM
18

RG200G3
200 Watt combo with new
"Valve-Dynamic" power
2 x 12 Celestion G12T-100s
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and
Contour controls.
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven MOSFET
power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller
included

With the addition of Valve-DynamicTM power to the new G3 combos, this combo line is a serious
contender in the pro market. Equipped with the tube driven MOSFET power amp, purists will fine the new
G3 tone surprisingly percussive, lush, and full, where the traditional hard core metal player will be deep in
tight punishing low end, and razor sharp mids and highs. With models ranging from 75 Watts to 200 Watts in
power, these combos have plenty of power for larger clubs. Built-in 24 bit digital effects are also available
on several new G3s, or simply choose the traditional spring reverb models. So, if you're shopping for power
with serious performance, do yourself a favor and see what dynamic tone youve been missing!

RG100G3

RG100G3
100 Watt combo with new
"Valve-Dynamic" power
2 x 12 Celestion
Seventy 80s
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and
Contour controls
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven MOSFET
power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller
included

19

RG200G3

RG200G3
200 Watt combo with new
"Valve-Dynamic" power
2 x 12 Celestion G12T-100s
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and Contour controls
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven
MOSFET power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller included

RG200DG3
(Optional Model)

RG75DG3

RG75DG3

75 Watt combo with new


"Valve-Dynamic" power
1 x 12 Celestion Seventy 80s
16-digital effects with
independent level controls
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and Contour controls
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven
MOSFET power circuit
Effects loop w/level controls
Line out
RF4G3 foot controller included

RG75G3
75 Watt combo with new
"Valve-Dynamic" power
1 x 12 Celestion Seventy 80s
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and Contour controls
Clean channel
w/boost option
Dual 3-band EQ's
12AT7 tube driven
MOSFET power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller included

20

RX50D
50 watts
2-channels
12" Randall Jaguar speaker
Overdrive channel
w/voicing and contour control
Clean channel w/boost option
16-digital effectsw/level control
Dual 3-Band EQ's
2-button footswitch included

Huge sound in a smaller package is the best way to describe the newly expanded RX Series. Our mission
to deliver a more affordable amp line that achieves the tone of much larger combos and stacks has
developed into quite a powerhouse. The RX tone circuits are designed to achieve the modern Randall tone
which delivers plenty of tight lows, as well as enough top end sizzle to satisfy any metal monster. The result
is an overwhelming sound that will redefine the modern practice amp.

RX120DHS

RX75R
75 watts
2-channels
12" Randall Jaguar speaker
Overdrive channel
w/voicing and contour control
Clean channel w/boost option
Dual 3-Band EQ's
Spring reverb w/level control
2-button footswitch included

RX120R

RX120R
120 watts
2-channels
12" Randall Jaguar speakers
Overdrive channel
w/Voicing and Contour control
Clean channel w/boost option
Dual 3-Band EQ's
Spring reverb w/level control
2-button footswitch included

RX120DHS
(Includes the RX120D head & RX412 cabinet)

RX120D includes:
120 watts
2-channels
Overdrive channel
w/Voicing and Contour control
Clean channel w/boost option
16-digital effects w/level control
2-button footswitch included
200W RX412 includes
4 x 12" Randall 50W Jaguars

21

RX50D

RX75R

RX15
12 watts
2-channel,
Overdrive w/boost mode
3-band EQ
Phone jack
CD/tape input
6 1/2" Randall Jaguar

RX20R
20 watts
2-channel,
Overdrive w/boost mode
3-band EQ
Spring Reverb
Phone jack
CD/tape input
10" Celestion Tube 10 speaker

RX20D

RX20D

RX15
RX20R

20 watts
2-channel,
Overdrive w/boost mode
3-band EQ
16-digital effects
Phone jack
CD/tape input
10" Celestion Tube 10 speaker

RX30D
30 watts
2-channel,
Overdrive w/boost mode
3-band EQ
16-digital effects
Phone jack
CD/tape input
12" Celestion Rocket 50 speaker

VMX30

RX30D

VMX30

30 watts
2-channels:
Overdrive and boost mode
3-band EQ
3-band graphic EQ
phone jack
CD/tape input
12" Randall Jaguar speaker

22

Apparel
available
online at
randallamplifiers.com

ROLT
RLSTB

RRTS
RSTB

RSSG
RDWSB

RDWSG

RSKU
RBLP

RLDWSB
23

Accessories
available
online at
randallamplifiers.com

Cover for heads, combos,


& cabinets available online

Replacement
Ruby, EH,JJ,
Tubes available
online

MTSBAG
Module
Carrying
Case

Replacement
Faceplates

16 OHM Celestions available at the online store


24

www.randallamplifiers.com
Call 1-800-US-SOUND for Customer Service. Copyright 2006 All rights reserved. Unauthorized reproduction is a violation of applicable copyright laws. Specifications subject to change without notice.
Randall Amplifiers is a Division of U.S. Music Corp. 444 East Courtland Street Mundelein, IL USA 60060 Phone: 847-949-0444 Fax: 847-949-8444 www.randallamplifiers.com Email: info@randallamplifiers.com

Potrebbero piacerti anche