Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Formatting boot device and reinstalling firmware is done from the console port of the unit, and using a
terminal program such as Hyper-Terminal running on your PC. The console port has to be connected to the
serial port of your PC, and serial port of your PC has to be configured as follows:
Baud rate:
Data:
Parity:
Stop:
Flow Control:
9600
8
none
1
none
Before you begin the actual work of reformatting boot device and reinstalling firmware, Please
ensure that:
1.
2.
3.
4.
5.
3.
After the firmware has been reloaded, your unit will restart. After the unit is up, and you have connectivity to
the web interface, reinstall the configuration file.
Please point your browser to the following link to see the complete procedure on how to perform this.
http://kc.fortinet.com/default.asp?id=338&Lang=1&SID=
The units firmmware can to be downloaded from the fortinet site:
https://support.fortinet.com/Login/UserLogin.aspx. You will need to have username and password to access
the site.
Cross-over cable
Cross-over cable
NIC card setting
NIC card setting
IP: 192.168.1.168
IP: 192.168.1.168
Mask:255.255.255.0
Mask:255.255.255.0
Gateway:
192.168.1.188
Gateway: 192.168.1.188
Internal
Internal
Port
Port
FGT
FGT
Console
Console
Port
Port