Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hardware Overview
Minimum Requirements
Network Requirements:
Wireless AC1200
2
6
7
DIR-850L
8
9
Package Contents
DIR-850L Wireless AC1200 Dual Band Cloud Router
Power Adapter
Ethernet Cable
Wi-Fi Configuration Card
Quick Install Guide
If any of the above items are missing, please contact your reseller.
Plug the power back into your DSL or cable modem. Please wait about
one minute before continuing.
Computer
USB
WPS
Modem
2
LAN
3
INTERNET
Connect an Ethernet cable from the Internet port of the router to the
Ethernet port on your DSL or Cable modem.
POWER
Modem
DIR-850L
Ethernet Cable
mydlink Requirements:
12V 2A
Ethernet Port
Plug the power adapter into your router and connect to an available
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
USB
WPS
2
LAN
3
Modem
INTERNET
POWER
12V 2A
Modem
Computer
DIR-850L
USB
WPS
2
LAN
3
INTERNET
POWER
Users with DSL providers - If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
Users with Cable providers - Make sure you unplug the power to your modem.
In some cases, you may need to turn it off for up to 5 minutes.
12V 2A
DIR-850L
USB
WPS
2
LAN
3
Advanced Users - If your ISP provided you with a modem/router combo, you will
need to set it to bridge mode so the DIR-850L router can work properly. Please
contact your ISP or refer to the user manual for your modem/router device.
INTERNET
POWER
12V 2A
DIR-850L
Ethernet Cable
Computer
After the router has powered up, verify that the Power (green) and Internet
(orange or green) LEDs are both lit then continue with the Configuration
section on the other side.
Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local. /. You can also enter the IP address of the
router (http://192.168.0.1).
DSL (PPPoE) users enter your PPPoE user name and password supplied by
your ISP. Click Next to continue.
Android
Once your app is installed, you may now configure your router. Connect to
the router wirelessly by going to your wireless utility on your device. Scan
for the wireless network name as listed on the supplied Wi-Fi Configuration
card/sticker. Select the network and then enter the Wi-Fi Password.
iOS
For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network
and a password. Your wireless devices (i.e., tablets, smartphones, and
laptops) will need to have this information entered to be able to connect to
your wireless network.
Troubleshooting
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (GPL) or GNU Lesser
General Public License (LGPL). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
product, are available to you at:
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
If the router automatically detects your Internet connection type, skip to step
5. If not, then select your Internet connection and click Next to continue.
Continue with the Setup Wizard to finish configuring your DIR-850L router.
Once completed, the Internet LED will turn green indicating that your router
is connected to the Internet.
Note: Setting up mydlink is optional and not required for the router to function.
Congratulations! You have completed the router installation.
Once connected, click on the QRS Mobile icon from your mobile device,
then click Start to continue. Please follow the on-screen instructions to
complete the setup.
Once the Setup Complete screen appears, click Save and write down the
new Wi-Fi Network name and password on your companion card for future
reference.
Note: To reconnect to your router, launch your wireless utility, select the new
Wi-Fi Network you created, and then enter your new Wi-Fi password.
Technical Support
http://tsd.dlink.com.tw/GPL.asp
Having trouble installing your new product? D-Links website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States
Canada
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
Copyright 2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of
D-Link Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks
of Apple Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless
signal rate derived from IEEE Standard 802.11ac (Draft), 802.11g, and 802.11n specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and
shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.
dlink.com for more details.
FRANAIS
Description du matriel
Exigences minimales
Configuration rseau requise :
Un modem haut dbit Ethernet
Routeur infonuagique
6
7
8
9
Voyant
d'alimentation
Contenu de la bote
2
Port USB
Bouton WPS
5
6
Cble Ethernet
7
8
Voyant Internet
Ports du rseau
local (1-4)
Port Internet
Bouton de mise
sous tension
Port d'alimentation
Bouton de
rinitialisation
Ordinateur avec:
Systme d'exploitation Windows ou Mac OS X
Un adaptateur install dethernet ou ladaptateur sans fil
DIR-850L
Ordinateur
USB
WPS
Modem
INTERNET
Vrifiez que vous avez install la dernire version de Java. Visitez le site
www.java.com pour tlcharger la dernire version.
POWER
Modem
12V 2A
DIR-850L
Cble Ethernet
Port Ethernet
USB
WPS
2
LAN
3
Modem
INTERNET
POWER
12V 2A
Modem
Pr-requis
LAN
Ordinateur
DIR-850L
USB
WPS
2
LAN
3
INTERNET
Les utilisateurs qui ont des fournisseurs d'accs DSL - Si vous utilisez une connexion PPPoE, vous
aurez besoin de votre nom d'utilisateur et de votre mot de passe PPPoE. Si vous ne disposez pas de
ces informations, contactez votre fournisseur d'accs Internet. Ne continuez pas tant que vous n'avez
pas ces informations.
Les utilisateurs qui ont des fournisseurs d'accs cbl - Assurez-vous de dbrancher l'alimentation
de votre modem. Dans certains cas, vous devrez peut-tre l'teindre pendant un maximum de 5
minutes.
Les utilisateurs avancs - Si votre FAI vous a fourni un modem/routeur combin, vous devrez le
configurer en mode pont pour que le routeur DIR-860L puisse fonctionner correctement.
Contactez votre FAI ou consultez le manuel de l'utilisateur de votre priphrique modem/routeur.
POWER
12V 2A
DIR-850L
USB
WPS
2
LAN
3
INTERNET
POWER
12V 2A
DIR-850L
Cble Ethernet
Ordinateur
Configuration
Il existe deux faons de configurer votre routeur:
A. Navigateur Web: utilisez un navigateur web sur votre ordinateur.
B. Application QRS Mobile: utilisez un appareil mobile avec l'application
QRS Mobile de D-Link. Reportez-vous la section Configuration de QRS
Mobile pour obtenir plus d'informations.
Si vous utilisez le cble (DHCP), cliquez sur Next (Suivant) pour continuer.
Pour les deux bandes, 2,4GHz et 5GHz, crez un nom pour votre rseau WiFi et un mot de passe. Vous devrez saisir ces informations sur vos appareils
sans fil (par exemple, vos tablettes, tlphones intelligents et ordinateurs
portables) pour pouvoir vous connecter votre rseau sans fil.
iOS
Android
Ce produit D-Link comprend des codes de logiciel dvelopps par des tiers,
y compris des codes de logiciel soumis la Licence Publique Gnrale GNU
( GPL ) ou la Licence Publique Gnrale GNU Limite ( LGPL ). Le
cas chant, les conditions de la GPL et de la LGPL, et les informations sur
l'obtention de l'accs au codes GPL et LGPL utiliss dans ce produit, sont
disponibles sur:
http://tsd.dlink.com.tw/GPL.asp
Assistance technique
3
Une fois connect, cliquez sur l'icne QRS Mobile sur votre appareil
mobile, puis cliquez sur Start (Dmarrer) pour continuer. Veuillez suivre
les instructions l'cran pour terminer la configuration.
Vous avez des difficults installer votre nouveau produit? Le site Web de
D-Link comporte la documentation utilisateur jour et les dernires mises
jour logicielles des produits D-Link. Les clients des tats-Unis et du Canada
peuvent contacter l'assistance technique de D-Link via notre site Web ou par
tlphone.
Les codes GPL et LGPL utiliss dans le produit sont distribus SANS AUCUNE
GARANTIE et sont soumis aux droits d'auteur d'un ou de plusieurs auteurs.
Pour plus de dtails, reportez-vous aux codes GPL et LGPL de ce produit et aux
conditions de la GPL et de la LGPL.
tats-Unis
Canada
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
Copyright 2013 D-Link Corporation/D-Link Systems, Inc. Tous droits rservs. D-Link et le logo D-Link sont des marques dposes de
D-Link Corporation ou de ses filiales aux tats-Unis et dans dautres pays. iPhone, iPad et iPod touch sont des marques dposes de
Apple Inc. Android est une marque de Google, Inc. Les autres marques dposes appartiennent leurs propritaires respectifs. Dbit
maximum du signal sans fil provenant des spcifications des normes IEEE802.11ac (en version prliminaire), 802.11g et 802.11n. Le
dbit de transmission rel des donnes peut varier. Le surdbit, ainsi que les conditions du rseau et les facteurs environnementaux,
dont limportance du trafic rseau, les matriaux de construction et les constructions, peuvent avoir des consquences ngatives sur
le dbit de transmission rel des donnes. Les facteurs environnementaux ont des consquences ngatives sur la porte du signal
sans fil. Les caractristiques du produit, sa taille et sa forme sont soumises modification sans pravis et l'apparence relle du produit
peut diffrer de celle illustre sur la bote. Consultez le www.dlink.com pour de plus amples dtails.