Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Revision record
Version
1.0
1.1
9301582-11
Date
May 2010
November 2012
Description
Original issue of document
Updated to reflect ECDIS software version 1.50
Page 2/20
Contents
REVISION RECORD ...........................................................................................................2
1
1.1
1.2
2
SYSTEM OVERVIEW FOR DM800E........................................................................5
2.1
System overview .......................................................................................................5
2.1.1
DPU (Data Processing unit) ...............................................................................6
2.1.2
DVD drive and External USB port ......................................................................6
2.1.3
eToken...............................................................................................................6
2.1.4
RPU (Radar processing unit) .............................................................................6
2.1.5
Alarm panel........................................................................................................6
2.2
ECDIS cluster............................................................................................................7
3
3.1
3.2
3.3
4
4.1
4.2
MONITOR .................................................................................................................9
Control panel on monitor...........................................................................................9
Control of Monitor......................................................................................................9
5
5.1
5.2
SELF TEST.............................................................................................................10
Buzzer in alarm panel .............................................................................................10
Test of monitor ........................................................................................................10
6
ECDIS DATA PROCESSING UNIT (DPU) .............................................................11
6.1
AC breaker..............................................................................................................11
6.2
Status LEDs ............................................................................................................12
6.2.1
CPU status LED...............................................................................................12
6.2.2
FE status LED..................................................................................................12
7
SYSTEM MANAGEMENT PANEL .........................................................................13
7.1
System Management Panel ....................................................................................14
7.2
Initialization of an eToken .......................................................................................15
7.2.1
When to perform an eToken initialization .........................................................15
7.2.2
Performing an initialization of a new eToken....................................................15
7.2.3
Performing a reinitialization of an existing eToken...........................................17
7.3
Dump for support ....................................................................................................19
9301582-11
Page 3/20
1.1 References
9301584
9301582-11
Page 4/20
Display
Alarm
panel
Keyboard
USB port
DVI COM1
USB 6
USB 7
USB 5
AP
eToken
USB 8
USB 2
RPU
(optional)
4x
2 x IEC 10 x IEC
Ethernet 61162-2 61162-1
To other
For sensors
ECDISs
9301582-11
Radar
Page 5/20
2.1.3 eToken
The eToken contains the keys needed for enabling access to charts. The eTokens for one installation
(i.e. vessel/cluster) shall be regarded as at set and must not be mixed with eTokens from another
installation.
9301582-11
Page 6/20
12
Backup
12
Cluster containing two ECDISs
Master
12
Backup
12
Planning
12
9301582-11
Page 7/20
3 Alarm panel
9301582-11
Page 8/20
4 Monitor
4.1 Control panel on monitor
Under normal operating conditions do not change the monitor settings except for brightness which
is controlled by the adjusting knob. Please notice that the monitor is not calibrated unless the white
line on the knob is facing up (12 oclock).
The monitor can be reset to calibrated state (expect for brightness control) by reverting to factory
settings (consult the manual for the monitor).
9301582-11
Page 9/20
5 Self test
The presence of the DVD drive, keyboard, Trackball, eToken and optionally the RPU is checked by
the DPU. An alarm will be generated if an error on one of these devices is detected.
9301582-11
Page 10/20
6.1 AC breaker
The ECDIS DPU is protected by electronic circuits and a resettable breaker. The breaker will pop
out if one of the following events happens
Over voltage
Permanent under voltage
Excessive input current
Internal power supply failure
It is safe to push the breaker in if popped out (if it pops out right away wait at least one minute
before pushing it in aging)
9301582-11
Page 11/20
9301582-11
Page 12/20
Click on Config
9301582-11
Page 13/20
9301582-11
Page 14/20
Click on No.
Insert the new eToken for the ECDIS in USB port 8 on the DPU.
Click on OK.
9301582-11
Page 15/20
The system may install a driver depending on the type of eToken you have inserted. A driver
installation involves several restarts.
Click on Yes.
Click on Yes.
After a few second the eToken has been initialized.
9301582-11
Page 16/20
Click on OK.
Click on Yes.
Click on Yes.
9301582-11
Page 17/20
Click on Yes.
After a few second the eToken has been reinitialized.
Click on OK.
9301582-11
Page 18/20
Insert a USB stick in the USB port adjacent to the DVD drive
Click Browse and select the USB stick as destination i.e. typically drive E:
Use the filename suggested by the program.
Click on Save
9301582-11
Page 19/20
Click on Close
9301582-11
Page 20/20