Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Contents
1 Create PetaLinux
Platform
2 Configure Software
Platform
3 Build PetaLinux
4 Run On Board
5 Digilent Atlys
6 ISE DS Version 13.1
6.1 Ethernet MAC
Address
Build PetaLinux
This step take some time
$ cd $PETALINUX/software/petalinux-dist
$ make
Run On Board
Run XMD by typing xmd in the terminal. Downlad the hardware bitstream to
the fpga and connect to the board.
Connect to UART with settings 115200 8-N-1. Log in as "root" with password
"root". Have fun!
Digilent Atlys
When using XMD on the Atlys, it is necessary to provide extra statements
to communicate with the hardware:
-cable type xilinx_plugin modulename digilent_plugin
i.e.
fpga -f download.bit -cable type xilinx_plugin modulename digilent_plugin
connect mb mdm -cable type xilinx_plugin modulename digilent_plugin
System Settings ---> Network Addresses Untick "Randomise MAC address" and
enter appropriate MAC address in the next field. Exit and save.
Rebuild U-boot and the images within PetaLinux:
[petalinux/software/petalinux-dist]$ make u-boot image