Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
IEEE INDONESIA
History
IEEE ( Institute of Electrical and Electronics Engineers ) formed in 1963 with the merger of :
IEEE Sections
Members of the IEEE automatically become members of their local IEEE section,allowing them
to share technical,professional and personal interests with others in IEEE’s worldwide member
community.
IEEE Indonesia Section at the IEEE Region 10 (Asia Pacific). Chairman of the IEEE Indonesia
Section 2009-2010 year was Arnold Ph. Djiwatampu. Currently IEEE Indonesia Section has
several chapters, namely:
1 | P a g e
1. Communication society
2. Communications society
3. Circuitsand systems society
4. Power engineering society
5. Signal processing society
6. Control systems society
7. Industry applications society
8. Robotics and automation society
9. Antennasand propagation society
10. Industrial electronics society
Society chapters
A chapter is the technical subunit of one or more IEEE section. Society chapters are
your local link to the valuable resources available from the IEEE and it’s 39 technical societies.
Chapter activities may include guest speakers, workshops and seminars as well as social
functions. Chapter provide society members with valuable opportunities to network at a local
level – enabling both personal and professional growth.
a. Knowledge
Staying current with the fast changing world of technology
b. Community
Unparalleled networking opportunities and the buying power into low, members only
rates on benefits and services
c. Profession
Enpowering members to build and own their careers giving back to society
Member Benefit
a. Volunteering opportunities
That build leadership skills and networking opportunities
2 | P a g e
The IEEE communications society provides a limited number of travel grants to help
members with travelling difficulties to attend major society conferences. Eight major
conferences are currently include in this program :
- ICC
- GLOBECOM
- INFOCOM
- WCNC
- NOMS or IM
- CCNC and SECON
in a broad-range of industries. Globally recognized, the IEEE-SA has strategic relationships with
the IEC, ISO, and the ITU and satisfies all SDO requirements set by the World Trade
IEEE standards spread from basic computing (e.g. floating point ) protocols. Ethernet, WiFi,
3 | P a g e
• Information Technology
• Telecommunications
• Transportation
With an active portfolio of nearly 1,300 standards and projects under development, the IEEE-SA
is increasingly the central source for standardization in a broad range of emerging technologies,
4 | P a g e
4G Mobile Technology
standards, with the aim to provide a wide range of data rates up to ultra-broadband (gigabit-
speed) Internet access to mobile as well as stationary users. Although 4G is a broad term that
has had several different and more vague definitions, this article uses 4G to refer to IMT
A 4G cellular system must have target peak data rates of up to approximately 100 Mbit/s for
high mobility such as mobile access and up to approximately 1 Gbit/s for low mobility such as
secure all-IP based solution where facilities such as IP telephony, ultra-broadband Internet
access, gaming services and HDTV streamed multimedia may be provided to users.[citation
needed] The pre-4G technology 3GPP Long Term Evolution (LTE) is often branded "4G", but
the first LTE release does not fully comply with the IMT-Advanced requirements. LTE has a
theoretical net bitrate capacity of up to 100 Mbit/s in the downlink and 50 Mbit/s in the uplink if a
20 MHz channel is used - and more if Multiple-input multiple-output (MIMO), i.e. antenna arrays,
are used. Most major mobile carriers in the United States and several worldwide carriers have
announced plans to convert their networks to LTE beginning in 2009. The world's first publicly
available LTE-service was opened in the two Scandinavian capitals Stockholm and Oslo on the
14 December 2009, and branded 4G. The physical radio interface was at an early stage named
High Speed OFDM Packet Access (HSOPA), now named Evolved UMTS Terrestrial Radio
Access (E-UTRA).
5 | P a g e
IPv6 support
Unlike 3G, which is based on two parallel infrastructures consisting of circuit switched and
packet switched network nodes respectively, 4G will be based on packet switching only.this will
require low latency data transmission. IPv6 support is essential in order to support a large
Cognitive Radio
Cognitive radio (CR), also related to software-defined radio (SDR), is a type of Radio in which
communication systems are aware of their environment and internal state and can make
decisions about their radio operating behavior based on that information and predefined
objectives.
IEEE 1900
` IEEE 1900 is a suite to support cognitive radio (CR), dynamic spectrum access (DSA),
and coexistence.
` Previous standards s.a. WiFi (802.11), Zigbee (802.15.4), and WiMAX (802.16) have
` CR will be related to dynamic spectrum access (DSA), which is the real-time adjustment
` The most interesting aspect is coexistence: resource selection to determine the type of
wireless/mobile access.
Access Scheme
` New access schemes like Orthogonal FDMA (OFDMA), Single Carrier FDMA (SC-
6 | P a g e
FDMA), Interleaved FDMA and Multi-carrier CDMA (MC-CDMA) are gaining more
◦ WiMAX: OFDMA
` The other important advantage of the above is that they require less complexity for
being used. Whereas earlier standards largely used PSK, more efficient systems such as
OFDM Advantages
propagation.
7 | P a g e
Spatial Multiplexing
` Multiple antenna technologies are emerging to achieve high rate, high reliability, and
` Spatial multiplexing gained importance for its bandwidth conservation and power
efficiency. It involves deploying multiple antennas at the transmitter and at the receiver.
Independent streams can then be transmitted simultaneously from all the antennas. This
increases the data rate into multiple folds with the number equal to minimum of the
number of transmit and receive antennas. This is called MIMO (as a branch of intelligent
antenna).
8 | P a g e