Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2013 Edition
Reference: ENDE12F060
EXTENDE
1/18
Table of Contents
1
PREAMBLE ................................................................................................................................................ 3
INTRODUCTION ....................................................................................................................................... 4
EXTENDE
2/18
1 Preamble
Thank you for your interest in CIVA training sessions!
In 2012, EXTENDE SA and EXTENDE Inc provided 21 training courses for more
than 100 people.
Five trainers travelled around the world to bring their expertise on CIVA and share
their knowledge to the CIVA community.
EXTENDE
3/18
2 Introduction
In 2012, new modules were added to the existing UT, ET and RT ones.
Since last September six modules are now available in CIVA: UT, ET, RT, CT
(computed tomography), GW (Guided waves), and CIVA ATHENA2D. More
information about these modules is available on our website at
http://www.extende.com/civa-2
2013 will see the release of the CIVA 11 version. This version will bring many
improvements and new functionalities.
All our different CIVA courses will focus on the principal new functionalities of this
version and also on the new modules available in CIVA. That is the reason why we
decided to diversify the types of training available.
4/18
For each session EXTENDE proposes one of the following extensions: CIVA RT/CT
or CIVA ET or CIVA GW or CIVA ATHENA2D (see schedule in 5).
The presentation of the addition module will take place at the beginning of the 4 th
day.
For people interested only in the additional module, it is possible to register
only for the last 2 days.
For people interested only in the UT module, it is possible to register only for
the first 4 days.
3.1.2 Two days Inter-company training courses:
This option is dedicated to people who want to be trained only in a specific module
other than the CIVA UT one.
EXTENDE
5/18
4 Program of sessions
4.1 Inter-company introductory course:Introduction to CIVA &
applications
4.1.1 Schedule for 5 days of training in EXTENDE S.A facilities:
Length: 5 days
Day 1:
Day 2:
- General introduction on CIVA
- Presentation of CIVA_UT/Defect
- Presentation of CIVA_UT/Beam
Response
computation
- Exercises of practical applications
- Exercises of practical applications
with CIVA UT/Defect Response
with CIVA UT/Beam computation
Day 3:
Day 4:
- Presentation on Phased-Array UT
- Presentation of the POD module
sensors simulation settings
- Build CIVA_UT configurations with
- Exercises of practical applications
less guidelines
with Phased-Array UT sensors
- Open discussions on CIVA use
- Presentation of analysis tools
and applications
available in CIVA_UT
- Presentation on the specific CIVA
module (RT/CT or ET or GW or
CIVA ATHENA2D).
- Practice on the specific CIVA
module (RT/CT or ET or GW or
CIVA ATHENA2D).
Day 5:
- Practice on the specific CIVA module (RT/CT or ET or GW or
CIVA ATHENA2D).
Objectives: After the course, the trainees will be able to build a CIVA simulation
configuration autonomously; they will obtain sufficient knowledge of the calculation
models to have clear ideas about the capabilities and the limits of the software.
Training documents: The trainees will receive a paper and electronic copy of the
training book and electronic copy of the presentations.
EXTENDE
6/18
EXTENDE
7/18
Length: 2 days
Day 1:
Day 2:
- General introduction on CIVA
- Exercises of practical applications
- Presentation on CIVA Eddy
with CIVA ET
Current (ET) module
- Presentation of the POD module
- Exercises of practical applications
- Build CIVA ET configurations with
with CIVA ET
less guidelines
- Open discussions on CIVA use
and applications
Objectives: After the course, the trainees will be able to build a CIVA simulation
configuration autonomously; they will obtain sufficient knowledge of the calculation
models to have clear ideas about the capabilities and the limits of the software.
Training documents: The trainees will receive a paper and electronic copy of the
training book and electronic copy of the presentations.
Price: 450 (not including taxes)/person/day for courses in EXTENDE facilities.
When: See Part 5 for the 2013 schedule. Additional sessions can be organized on
demand if enough people are interested.
Organization details: The sessions take place in EXTENDE premises, Le Bergson 15 Avenue Emile Baudot - 91300 Massy, France.
EXTENDE provides sufficient computers to use CIVA in groups of 1 or 2.
Trainees are allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024.
EXTENDE delivers all the necessary licenses to use CIVA during the course.
EXTENDE will provide lunch each day.
EXTENDE
8/18
Length: 2 days
Day 1:
Day 2:
- General introduction on CIVA
- Build CIVA RT configuration with
- Presentation of the CIVA
less guidelines
radiography (RT) module
- Introduction to CIVA tomography
- Exercises of practical applications
(CT) module
with CIVA RT
- Exercises of practical applications
with CIVA CT
- Open discussions on CIVA use
and applications
Objectives: After the course, the trainees will be able to build a CIVA simulation
configuration autonomously; they will obtain sufficient knowledge of the calculation
models to have clear ideas about the capabilities and the limits of the software.
Training documents: The trainees will receive a paper and electronic copy of the
training book and electronic copy of the presentations.
Price: 450 (not including taxes)/person/day for courses in EXTENDE facilities.
When: See Part 5 for the 2013 schedule. Additional sessions can be organized on
demands if enough people are interested in.
Organization details: The sessions take place in EXTENDE premises, Le Bergson 15 Avenue Emile Baudot - 91 300 Massy, France.
EXTENDE provides sufficient computers to use CIVA in groups of 1 or 2.
Trainees are allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024.
EXTENDE delivers all the necessary licenses to use CIVA during the course.
EXTENDE will provide lunch each day.
EXTENDE
9/18
Length: 2 days
Day 1:
Day 2:
- General introduction on CIVA
- Exercises of practical applications
- Presentation of the CIVA Guided
with CIVA GW
Waves (GW) module
- Open discussions on CIVA use
- Exercises of practical applications
and applications
with CIVA GW
Objectives: After the course, the trainees will be able to build a CIVA simulation
configuration autonomously; they will obtain sufficient knowledge of the calculation
models to have clear ideas about the capabilities and the limits of the software.
Training documents: The trainees will receive a paper and electronic copy of the
training book and electronic copy of the presentations.
Price: 450 (not including taxes)/person/day for courses in EXTENDE facilities.
When: See Part 5 for the 2012 schedule. Additional sessions can be organized on
demand if enough people are interested.
Organization details: The sessions take place in EXTENDE premises, Le Bergson 15 Avenue Emile Baudot 91300 Massy, France.
EXTENDE provides sufficient computers to use CIVA in groups of 1 or 2.
Trainees are allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024.
EXTENDE delivers all the necessary licenses to use CIVA during the course.
EXTENDE will provide lunch each day.
EXTENDE
10/18
Length: 4 days
Day 1:
Day 2:
- General introduction on CIVA
- Presentation of CIVA UT/Defect
- Presentation of CIVA UT/Beam
Response
computation
- Exercises of practical applications
- Exercises of practical applications
with CIVA UT/Defect Response
with CIVA UT/Beam computation
Day 3:
Day 4:
- Presentation on Phased-Array UT
- Presentation of CIVA Eddy
sensor simulation settings
Current (ET) module or CIVA RT
- Exercises of practical applications
module
with Phased-Array UT sensors
- Exercises of practical applications
- Presentation of POD module and
with CIVA ET or CIVA RT
analysis tools available in CIVA UT
- One session is dedicated to the
- Exercises of practical applications
ET, one to the RT
with UT POD and analysis tools
For people interested only in the UT module, it is possible to register only for
the first 3 days.
Two sessions are scheduled for trainings in USA. One will be dedicated to the
UT/RT, the second one to the UT/ET.
For the dates please refer to chapter 5.
Objectives: After the course, the trainees will be able to build a CIVA simulation
configuration autonomously; they will obtain sufficient knowledge of the calculation
models to have clear ideas about the capabilities and the limits of the software.
Training documents: The trainees will receive a paper and electronic copy of the
training book and electronic copy of the presentations.
Price: US$ 500 (not including taxes)/person/day for training near EXTENDE Inc.
Facilities (USA, NY).
When: See Part 5 for the 2013 schedule. Additional sessions can be organized on
demand if enough people are interested.
EXTENDE
11/18
Organization details: The sessions take place near EXTENDE Inc Premise in
Ballston Spa, NY 12020 USA at a local facility.
EXTENDE provides sufficient computers to use CIVA in groups of 1 or 2.
Trainees are allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024.
EXTENDE delivers all the necessary licenses to use CIVA during the course.
EXTENDE will provide lunch each day.
EXTENDE
12/18
EXTENDE
If the session takes place in EXTENDE or at a local facility near EXTENDE Inc
premises, we provide computers to use CIVA in groups of 1 or 2. Trainees are
allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024. EXTENDE delivers all the necessary
licenses during the course. EXTENDE will provide lunch each day.
If the session is organized on a customer site, the trainer travel fees will be
charged at a price defined in the official proposal. The customer is in charge of
the organization of the training room (computers, projector, lunch, etc.).
EXTENDE delivers all the necessary licenses to use CIVA during the course.
13/18
EXTENDE
If the session takes place in EXTENDE or at a local facility near EXTENDE Inc
premises, we provide computers to use CIVA in groups of 1 or 2. Trainees are
allowed to bring their own laptop, however CIVA is easiest to use with a
graphic resolution of at least 1280x1024. EXTENDE delivers all the necessary
licenses during the course. EXTENDE will provide lunch each day.
If the session is organized on a customer site, the trainer travel fees will be
charged at a price defined in the official proposal. The customer is in charge of
the organization of the training room (computers, projector, lunch, etc.).
EXTENDE delivers all the necessary licenses to use CIVA during the course.
14/18
EXTENDE
15/18
EXTENDE
Dates
March 18 to 22
April 16 to 19
April 25 to 26
May 30 to 31
June 3 to 7
September 16 to 20
October 8 to 9
October 29 to November 1
November 18 to 22
Location
Massy, France
Malta, NY, USA
Massy, France
Massy, France
Massy, France
Massy, France
Massy, France
Malta, NY, USA
Massy, France
16/18
EXTENDE is situated at 17 kms south from Paris, in the city of Massy, France.
Find us on GoogleMaps
Coming by car:
From Paris, the easiest way is to take the Highway A6-A10, take the exit Massy.
The journey time is approximately 20 minutes from the south of Paris.
Contact us
EXTENDE S.A:
Our facilities are in
Le Bergson
15 Avenue Emile Baudot
91 300 Massy
France
Contact@extende.com
Fax: +33 (0)9 72 13 42 68
EXTENDE
17/18
Coming by car:
Take I-87 to exit 12 onto Route 67 East. Turn onto Saratoga Village Boulevard at the
round-about and take it till you reach the Fairfield Inn.
Contact us
EXTENDE Inc.:
PO Box 461
Ballston Spa, NY 12020
USA
Contactus@extende.com
Fax 518- 602-1368
EXTENDE
18/18