Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
In recent years, complicating factors, such as solids content, scaling, high GOR, high viscous fluids, low production rates, etc., have extended impact on the overall performance of artificial lift equipment. ESP application in such operating conditions is limited.
The most efficient artificial lift method that copes with these complicating factors is progressive
cavity pumping, since it brings a viable solution to oil recovery issues for 70% of difficult wells.
Operating Conditions
Parameters
Specifications
Running depth, m
up to 2400
3 to 100
99
1400
6.0 to 8.5
up to 1*10-3
50
130
The following design types of Submersible Progressive Cavity Pumps are available:
Twin-opposed Electric Submersible Progressive Cavity Pump with fixed direction of residual
thrust load EVNFB series.
Operating components of ESPCP are a stator filled with elastomer and a steel rod. Elastomer ma-
terial and clearance between the rod and stator are selected based on specific operating conditions.
BORETS COMPANY
Head, m
EOVNB5
3 - 20
1000 - 2500
45
EOVNB5A
8 - 45
1000 - 2500
120
EOVNB6
85
1000 - 1200
43
210
Head, m
8 - 32
8 - 32
1000 - 1500
1000 - 1500
4
4
70
70
EVNB5
EVNFB5
F means that pumps are equipped with motor seal 1PB92A, permanent magnet motor and clutch coupling
placed between the motor seal and the motor.
Single ESPCP
with 4-Pole
Induction Motor
Twin-opposed ESPCP
with 4-Pole
Induction Motor
Technical Specifications
Technical Specifications
Pump
Size
EOVNB5
Technical
Parameters at 1380 rpm
Flow
Rate,
m3/day
Head,
m
12 - 50
1000 - 2000
Pump
Size
Technical
Parameters at 1380 rpm
Flow
Rate,
m3/day
Head,
m
EVNB5
25 - 100
1000 - 1500
EVNFB5
25 - 100
1000 - 1500
F means that pumps are equipped with motor seal 1PB92A, 4-pole induction motor and
clutch coupling placed between the motor seal
and the motor.