Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
P r o d u c t s
c o r p o r a t i o n
MACHINE PRESSED CONCRETE PIPES
Main Office:
3rd Floor A & E Building, Gov. Fortunato Halili Ave., Bagbaguin, Sta. Maria, Bulacan
Tel. No. (044)641-1867
Fax No. (044)641-1870
Plant Site:
Km.38 Pulong Buhanging, Sta. Maria, Bulacan
Tel. No. (044)641-1636
M I S S I O N
S T A T E M E N T
Our main goal is to provide high strength, high quality, concrete products. This endeavor to support
the developers, construction companies and builders in their quest to provide and attain high quality drainage
and sewer facilities in their developmental projects has always motivated our company to inculcate efficiency
and team work in our systems. We have, also, continued our efforts to uplift the discipline involved in concrete
pipe casting by introducing new technology through proper research and development and improve our
methodologies and production processes.
Par Concrete Pipe Manufacturing facility at Km.38 Pulong Buhangin, Sta. Maria Bulacan
View of Curing Areas and stockyard from the platform of the Concrete Batching Plant
Fine and coarse aggregates are carefully stored in different compartments to ensure the
consistency in the proportion of aggregates in our concrete mix. These materials are washed before loading to
different hoppers above the batching plant to ensure that the materials we use are free from clay or other
indigenous agents that may affect the strength of our concrete mix.
Proportioning of Materials
After the proper segregation and cleaning of the fine and coarse aggregates, the materials are then
conveyed to the batching plant and are batched by weight in accordance with the specifications to ensure the
consistency of the concrete mix.
Concrete Mix
Our dry cast method of production requires a consistent proportioning of fine and coarse mineral
aggregates and Portland Cement, in order to attain concrete strength of up to 4500 psi and sometimes when
necessary up to 5000 psi. To achieve this goal, a concrete batching plant have been installed in our
manufacturing plant. Fine and coarse aggregates, Portland cement, and water are all measured by weight
before loading into our concrete turbine mortar mixer. The materials are then mixed thoroughly to attain a
consistent concrete mixture in all the pipes that we manufacture.
Pipe Casting
After achieving the desired concrete mixture and fabricating the reinforcing bars, the materials are
brought to the concrete pipe casting area. The adequately mixed low slump concrete mix is then distributed on
to the vertical moulds while the external vibrators attached to the moulds are activated. The intense vibration
applied ensures maimum compaction and produces a high density of concrete in the concrete pipe walls
during concrete placement. The upper portion of the mould is sealed and blows of pressure of up to 8000 psi is
applied to drive out excess water. The pipe is then lifted to the curing area and are inspected by our quality
control technicians.
View of the Conveyor, Cement Silo, Batching Plant, Mixer and Curing Areas
CLASS
I
CLASS
II
400 pcs
400 pcs
400 pcs
400 pcs
250 pcs
250 pcs
CLASS
III
CLASS
IV
200 pcs
180 pcs
150 pcs
100 pcs
75 pcs
70 pcs
70 pcs
70 pcs
50 pcs
MANHOLE RISERS
50 pcs
900 mm dia
50 pcs
1200 mm dia
50 pcs
+ = Available
CLASS
V