Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Teradek Decoder
There are four different model, as follows:
HD-SDI Out
HDMI Out
Wi-Fi/Ethernet
Cube 355
Cube 455
Ethernet Only
Cube 305
Cube 405
Pre-setting
1. Instal TeraCentral to your PC for setup.
- Download from: http://www.teradek.com/pages/downloads
2. Connect your PC and Teradek decor with network (wired/wireless). You can
download Cube Reference Guide at:
https://dl.dropboxusercontent.com/u/11455193/Teradek/Cube/Docs/Teradek_Cube_Reference_Guide_v2_1211.pdf
Note: The streaming may delay more when the Jitter Buffering is enabled. However some picture quality
may be losed if set to Disable. This depends on bandwidth. s
Note: When the above settings are completed the decoder settings will become invisible from the PC. If you
need to access them, do the following:
Wireless Connection
- Click Wireless tab
- Set mode to Infrastructure (Slave) and click Apply
- When below screen appears, click Scan For Wireless Networks and select your network
- Select Security Mode and enter password
- Click Apply
5. GY-HM650 Setup
- Follow points 3 - 9 under VLC Media Player
- Point 7 should be set the same as MPEG Transport Settings on the Teradek Decoder