Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2011
TEST QUESTIONS
Area of Specialization
IECEP Manila
Area of Specialization
Vgy
t
Substituting all values, we get for V
(746W )(8hx3600s / h ) = 1.1x10 2 m 3
V=
1x10 3 kg / m 3 9.8m / s 2 (20m )
)(
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
De La Salle University
Address
Ann E. Dulay
Area of Specialization
Choices:
a. A personnel of NTC has conveyed through telephone that the application has
already been approved.
b. the firm applying for the construction permit has submitted to the NTC its
application for the same.
c. the technical documents has already been signed and sealed by the PECE.
d. The NTC has already issued a Permit to construct.
ANSWER:
D
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
De La Salle University
Address
Ann E. Dulay
Area of Specialization
Choices:
a. it is offered by a telecommunications entity whose proceeds of utility
operations are not cross-subsidized.
ANSWER:
D
SOLUTION ( IF PROBLEM -SOLVING)
Reference: RA7925
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
De La Salle University
Address
Ann E. Dulay
Area of Specialization
Choices:
a. inform your employer about it
b. have somebody run the business instead of you
c. try to find new clients
d. keep your prices lower than your companys
ANSWER:
A
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Choices:
a. Direct shear
b. Bending stress
ANSWER: a. Direct shear
c. Torsional shear
d. Torsional stress.
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
c. Torsional shear
d. Torsional stress.
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
strain
c.
moment
d. torque
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
Address
Area of Specialization
c.
12,000psi
d. 13,000psi
F 27,000lb
lb
=
= 12,000 2 = 12,000 psi
2
A 2.25in
in
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
The proportional limit is the value of stress on the stressstrain diagram curve at which the curve first deviates from a
straight line.
Choices:
a. Proportional limit
b. Elastic limit
c. Yield point
d. Tensile point
ANSWER: a. Proportional limit
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
IECEP-Manila Form 1 S.2011
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
IECEP-Manila Form 1 S.2011
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
b.
c.
d. 5
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
c. Less than
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
c.
Hardness
d.
Toughness
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
c.
Hardness
d.
Toughness
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
c.
485MPa
d.
500MPa
10,000 N
= 500 MPa
20 x10 6 m 2
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
Address
Area of Specialization
V
2
4 d
65M =
P
dt
P
d b
b =
V
2
4 ( 25mm)
V = P = 31.91kN
t=
31.91kPa
(25mm)130 M
t = 9.82mm
t=
30MPa
d.
40MPa
P
A
31.91kNkN
[125mm 8mm 25mm 8mm]
= 39.89MPa
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
c. 17.53MPa
d. 18.83MPa
D
2t
150 MPa =
(450mm)
2(25mm)
= 16.67 MPa
TEST QUESTIONS
Area of Specialization
c. 176.47psi
d.
188.73psi
pD
4t
p (4 12in)
4(4 / 17in)
p = 176.47 psi
9000 =
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
c.
171kN
d.
181kN
PL
AE
P ( 2 m)
AE
0.8 10 3 m =
0.95 10 3 =
P (3)
2
2
2
+
(
40
mm
)
300
G
[(
4
4 52mm) ( 40mm) ]150G
P = 160.57 kN
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
A steel rod 3.5m long is secured between two walls. If the load on the
rod is zero at 30C, compute the stress when the temperature drops to
-30C. The cross sectional area of the rod is 1200mm2,
=11.7um/(mC), and E=200GPa.
Choices:
a. 110MPa
b. 120MPa
ANSWER: a. 140MPa
c. 130MPa
d.
140MPa
= LT
=
PL
AE
LT =
PL
AE
T =
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
JG
12
10
x
32
d.
0.71
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
Address
Area of Specialization
What is the minimum diameter of a solid steel shaft that will not twist
through more than 4 in a 6m length when subjected to a torque of
13kN-m? What max shearing stress is developed? G=85 GPa
Choices:
a. 107.6mm
b. 113.3mm
ANSWER: a. 107.6mm
c.
121.9mm
d.
126.4mm
13k (6)
= ( d )4
4 x
9
180
32 85 x10
d = 107.57 mm
Reference: Title of the book, author and page
STRENGTH OF MATERIALS, 4TH EDITION, copyright 1987
ANDREW PYTEL, FERDINAND SINGER (page 68)
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
FEU-EAST ASIA COLLEGE
Name of School
FEU-EAC Main Building, FEU Campus Nicanor
Reyes St. Sampaloc Manila
Address
Area of Specialization
Choices:
a. 160mm
ANSWER:
b.
165mm
c.
170mm
d.
175mm
Endorsed by:
Joshua B. Ancheta, PECE
School Representative
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
School Representative
IECEP Manila
1. Please Use One Page per Question.
2. Fill-out all needed information.
3. Submissions with incomplete data will not be considered.
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(x) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
Who is called the father of modern science precisely because he initiated the comparison
between theory and experiment?
Choices:
a. Plato
b. Aristotle
c. Galileo
d. Socrates
ANSWER:
c. Galileo
SOLUTION ( IF PROBLEM -SOLVING)
IECEP Man
Reference:
p. 439 Physics the Excitement of Discovery
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
ANSWER:
c.The Discrete Memoryless Chanel
SOLUTION ( IF PROBLEM -SOLVING)
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
IECEP Manila
School Representative
IECEP Manila
IECEP Manila
IECEP Manila
Endorsed by:
School Representative
IECEP Manila
Reference:
p.383 Electronic Communication System 2nd edition by Roy Blake
Endorsed by:
School Representative
IECEP Manila
IECEP Manila
IECEP Manila
Reference:
p.76 chapter 4, Material Science and Engineering (an introduction) 4th edition by William B.
Callister Jr.
Endorsed by:
School Representative
IECEP Manila
IECEP Manila
IECEP Manila
Choices:
a.
1540degC
d. 768degC
b. 1395degC
c. 910degC
ANSWER:
A. 1540degC
IECEP Manila
TEST QUESTIONS
In Quenching process, heat is removed in three stages, in the first stage, the surface of the work
piece comes into contact with the quenchant. This stage is called ________.
Choices:
a. Liquid Cooling Stage
c. Vapour Blanket Stage
ANSWER:
c. Vapour Blanket Stage
Endorsed By:
School Representative
IECEP Manila
In the Iron-Iron carbide diagram, the alloys containing solid phase with more that 2% carbon are
known as ______
Choices:
b.
graphite
steel
b. Cast iron
c. alpha-ferrite
d.
ANSWER:
B. cast iron
Endorsed By:
School Representative
IECEP Manila
Choices:
a. develop a high hardness level in component extended for heavy duty service.
b. relieve residual stresses and improve ductility and toughness of the hardened steel
c. reduce the tendency towards distortion and cracking during conventional quenching
d. refine the grain structure to obtain homogenous structure
ANSWER:
b. relieve residual stresses and improve ductility and toughness of the hardened steel
Endorsed By:
School Representative
IECEP Manila
Choices:
a.
Austenite
b. Cementite
c. ferrite
d. pearlite
ANSWER:
B. cementite
School Representative
IECEP Manila
The following are the reasons why alloying elements are added to carbon steel except:
Choices:
a.
b.
resistance
Increase hardenability
To improve high temperature properties
c. To increase wear
d. to improve malleability
ANSWER:
d. to improve malleability
Endorsed By:
School Representative
IECEP Manila
Choices:
a.
b.
ANSWER:
c.
Endorsed By:
School Representative
IECEP Manila
c. Branched Polymers
d. Networked Polymers
ANSWER:
a. Liners polymers
Endorsed By:
School Representative
IECEP Manila
_____ is the combination of operation involving the heating of metal/alloy in solid state and
cooling it to obtain the desired properties
a. Heat treatment
b. Annealing
c. Normalising
d. Hardening
ANSWER:
A.
Heat Treatment
Endorsed By:
School Representative
IECEP Manila
ANSWER:
School Representative
IECEP Manila
Any steel heated to a particular temperature above the critical temperature results in the
formation of ______
a. Cementite
b. Martensite
c. Austenite
d. Bainite
ANSWER:
C.
Austentite
Endorsed By:
School Representative
IECEP Manila
The principal source of information in the actual process of autenite under non-equilibrium
condition as a ______
a. TTT Diagram
b. TTL Diagram
c. TTC Diagram
d. CCT Diagram
ANSWER:
A.
TTT Diagram
School Representative
IECEP Manila
______ involves heating to a predetermined temperature, holding at that temperature and then
cooling at a very slow rate.
a. Heat treatment
b. Annealing
c. Normalising
d. Hardening
ANSWER:
B.
Annealing
Endorsed By:
School Representative
IECEP Manila
Hardness of a material may be defined based on the hardness testing method. The hardness
that is indicated by the measure of the resistance offered by a material to plastic deformation is
_______
a. Scratch Hardness
c. Indention Hardness
b. Rebound hardness
d. Deformation Hardness
ANSWER:
C. Indention Hardness
Endorsed By:
School Representative
IECEP Manila
A hardness test that measured based on the depth of indention and not on the surface area that
lies on the principle that hardness varies inversely to the depth of the penetration
a. Knoop Microharndess Test
b. Rockwell Hardness Test
ANSWER:
B. Rockwell Hardness Test
Endorsed By:
School Representative
IECEP Manila
c. alloying
d. quenching
ANSWER:
a. Homogenisation
SOLUTION (if problem solving)
Endorsed By:
School Representative
IECEP Manila
ANSWER:
a. It improves its corrosion resistance
Endorsed By:
School Representative
IECEP Manila
a. Phase rule
b. Lever rule
c. level rule
d. bi-phase rule
ANSWER:
B . Lever Rule
SOLUTION (if problem solving)
School Representative
IECEP Manila
Material Science
Hardening is always followed by _____ in order relieve the residual stresses an improve the
ductility and toughness of the hardened steel
a. Heat treatment
b. Annealing
c. Tempering
d. Hardening
ANSWER:
c.Tempering
Endorsed By:
School Representative
IECEP Manila
___ is the process by which the carbon content of the steel is increased
a. Carbonitriding
b. Carburising
c. Cyaniding
d. Nitriding
ANSWER:
b.Carburising
Endorsed By:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(/) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
A closed system that operates in cycles and exchanges only heat and work with
its surroundings is known as:
Choices:
a. Carnot engine
c. Stirling engine
ANSWER:
b. Heat engine or thermal engine
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(/) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
The third law of thermodynamics is also known as:
Choices:
a. Clausius heat theorem
c. Kinetic theory of energy
b. Joules theorem
d. Nernst heat theorem
ANSWER:
d. Nernst heat theorem
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. Ericson cycle
c. Brayton cycle
b. Stirling cycle
d. Carnot cycle
ANSWER:
b. Stirling cycle
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
A general theory of human motivation investigated by Morshow which identifies
the levels of human needs.
Choices:
a. Two-factor Theory
b. Hierarchy of human needs
c. Human Resource Management
d. Personality Test
ANSWER:
b) Hierarchy of Human Needs
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
Which of the following is not true about perfect competition?
Choices:
a. Assurance of complete freedom in the part of both buyer and seller.
b. There is no restriction on additional suppliers entering the market.
c. The buyer is at the complete mercy of the supplier in terms of availability
and price of the product.
d. both a and b
ANSWER:
c). The buyer is at the complete mercy of the supplier in terms of
availability and price of the product.
Reference: Engineering Economy 4th Edition by William G. Sullivan, Elin M.
Wicks; C. Patrick Koelling. pp.48-49
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
In Herzbergs two-factor theory, what are the two factors being identified?
Choices:
a. Growth and Maintenance
c. Motivators or Hygiene Factors
ANSWER:
d.) All of the above
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
Dynamic phenomenon that takes place in a molecule as a bonding occurs.
Choices:
a. Covalent b. Resonance
c. Fusion d. Reduction
Answer:
b. Resonance
Reference: Fundamentals of College Chemistry Part1 by: Salita, Cayson, Lim
p.54
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
The mechanical engineering department has a student team that is designing a
formula car for National competition. The time required for the team to assemble
the first car is 110hrs. Their improvement is 0.7 which means that as output is
doubled, their time to assemble a car is reduced by 30%. Determine the time it will
take the team to assemble the 13th car.
Choices:
a. 39.38 hrs.
ANSWER:
b. 29.39 hrs.
c. 52.33 hrs.
d. 22.27 hrs.
b)29.39 hrs
SOLUTION ( IF PROBLEM -SOLVING)
ZB=110(13)Log0.7/Log2
=110(13)-.5146
= 29.39 hrs
Reference: Engineering Economy 4th Edition by William G. Sullivan, Elin M.
Wicks; C. Patrick Koelling p.111
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. D Alemberts theorem
c. Bayes theorem
b. Varignon theorem
d. Pappus Theorem
ANSWER:
b) Varignon Theorem
Reference: Engineering Mechanics 2nd Edition by Ferdinand L. Singer p.26
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
This effect is present whenever a body that rotates about one of its axes also
rotates about another axis not parallel to the first one.
Choices:
a. Gyroscope
ANSWER:
a) Gyroscope
b. Precession
c. Gyration
d. Torsion
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. angle friction
c. resultant angular
b. Elastic impact
d. Projectiles
ANSWER:
c. resultant angular
Reference: Engineering Mechanics 2nd Edition by Ferdinand L. Singer p.454
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. Principle of Transmissibility
c. Principle of Moments
ANSWER:
b. DAlemberts Principle
b. DAlemberts Principle
d. Varignon
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. Equations of compatibility
d. Equation of torsion
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
The most straightforward model to describe the disinfection process
Choices:
a. CT approach
c. Membrane Processes
b. Chicks Law
d. Henrys Law
ANSWER:
b. Chicks Law
Reference: Environmental Engineering: Fundamentals, Sustainability, Design :
by: Minecic, James Zimmerman, Julie Beth p.434
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( /) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
A family of compounds produced commercially by chlorinating biphenyl.
Choices:
a. Chemical structure of Polychlorinated Biphenyls (PCBS)
b. Chemical Oxygen Demand (COD)
c. Total Suspended Particulate (TSP)
d. Biochemical Oxygen Demand (BOD)
ANSWER:
A) Chemical structure of Polychlorinated Biphenyls (PCBS)
Reference: Environmental Engineering: Fundamentals, Sustainability, Design :
by: Minecic, James Zimmerman, Julie Beth p.36
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(X) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
A simply supported beam, located at the midpoint is 4m long and a circular cross
section of 10cm in diameter. If the maximum permissible deflection is 5mm,
determine the maximum value of the load P. The material is steel for which
E=200GPa.
Choices:
a. 3680 N
ANSWER:
b.
3678 N
c.
3670 N
a. 3680 N
SOLUTION ( IF PROBLEM -SOLVING)
P = 3680 N
Reference: Strength of Materials 5th edition
William Nash, Ph.D and Merle C. Potter, Ph.D.
page131
Endorsed by:
School Representative
IECEP Manila
d. 3682 N
TEST QUESTIONS
b. 2061 kPa
c.
2066 kPa
d.
c. 2066 kPa
SOLUTION ( IF PROBLEM -SOLVING)
Determining the gas constant:
Solving for P:
P = 2066 kPa
Reference: Fundamentals of Thermodynamics 6th Edition,
Sonntag, Borgnakke, and Van Wylen
page 63
Endorsed by:
School Representative
IECEP Manila
2069 kPa
TEST QUESTIONS
b.
3588 KJ
c. 359KJ
d.
3590 KJ
d. 3590 KJ
SOLUTION ( IF PROBLEM -SOLVING)
The 1st law of thermodynamics
= 3590 KJ
Reference: Fundamentals of Thermodynamics 6th Edition Sonntag, Borgnakke,
and Van Wylen, page 123
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. 68.6 gH2O
c. 69.6 gH2O
d. 70.6 gH2O
b. 68.6 gH2O
SOLUTION ( IF PROBLEM -SOLVING)
= 68.6 gH2O
Reference: Chemistry A molecular Approach 2nd Edition,
Nivaldo J. Tro
page 473
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. 1.8%
c.
1.4%
d.
c. 1.4%
SOLUTION ( IF PROBLEM -SOLVING)
= 1.4%
Reference: Chemistry A molecular Approach 2nd Edition
Nivaldo J. Tro
page 678
Endorsed by:
School Representative
IECEP Manila
1%
TEST QUESTIONS
b.
-3.690C
c.
-40C
d. -5.870C
a. -3.2 C
SOLUTION ( IF PROBLEM -SOLVING)
= 3.20 C
Freezing point =
0.00 0C 3.20 C
= -3.20C
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b.
70mA
c.
60mA
d.
35mA
c.
60mA
SOLUTION ( IF PROBLEM -SOLVING)
Total resistance of the circuit is
= 5 + 20
= 25
Getting current
= 0.06A or 60mA
Reference: The Physics of Everyday Phenomena (A conceptual introduction to
Physics) 7th Edition, W. Thomas Griffith, Juliet W. Brosing
Page 265
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. 50
c.
80
d.
120
c. 80
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. 15.96 %
c.
13.93%
d. 11.2%
c. 13.93%
SOLUTION ( IF PROBLEM -SOLVING)
K = 13.93%
Reference: Fundamentals of Engineering Economics
Chan S. Park
Page 336
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. $67,044
c. $67,855
d. $67,033
b. $67,044
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b.
31%
c.
25%
d. 33%
d. 33%
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. unsteady flow
c. uniform flow
d. closed flow
a. steady flow
SOLUTION ( IF PROBLEM -SOLVING)
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. Crystallization
d. Glass transition temperature
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. Joseph Henry
d. Guglielmo Marconi
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
b. Shear stress
d. Shear Strain
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(x ) General Engineering and Applied Science
() Electronics System & Technologies- Digital Communication
QUESTION:
Choices:
a. 190m and 214m
b. 290m and 314m
c. 280m and 320m
d. 180m and 220m
ANSWER:
d
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 33. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
(x ) General Engineering and Applied Science
() Electronics System & Technologies- Digital Communication
QUESTION:
Choices:
a.
b.
c.
d.
7.6 s
6.7 s
5.6 s
6.5 s
ANSWER:
a.
SOLUTION ( IF PROBLEM -SOLVING)
/
Reference:
How to Solve Physics Problems, page 34. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
21.4 m/s
11.4 m/s
34.1 m/s
44.1 m/s
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 43-44 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
13.4 m/s
11.4 m/s
34.1 m/s
44.1 m/s
ANSWER:
a.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 44,45. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
7.3 m/s^2
2.5 m/s^2
3.7 m/s^2
5.2 m/s^2
ANSWER:
b
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 50,51. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
43.4 m/s
34.4 m/s
38.6 m/s
36.8 m/s
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 56. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
0.2
0.12
0.32
0.18
ANSWER:
d.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 57,58. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
21.4 m/s
11.4 m/s
34.1 m/s
44.1 m/s
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 58. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
118N
145N
181N
154N
ANSWER:
d.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 61 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. 2141J
b. 1420J
c. 3430J
d. 4121J
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 65 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
8x10-2J
9x10-2J
10x10-2J
11x10-2J
ANSWER:
b.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 67 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
21.4 m/s
11.4 m/s
34.1 m/s
44.1 m/s
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 78. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
480 m/s
380 m/s
280 m/s
180 m/s
ANSWER:
a.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 83. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
1.3 m/s
4.3 m/s
3.5 m/s
2.4 m/s
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 85 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
1.6 cm
2.6 cm
3.6 cm
4.6 cm
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 91 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
59N
69N
79N
89N
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 101 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a. 356 kph
b. 245 kph
c. 134 kph
d. 25 kph
ANSWER:
a.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 103 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
10 mins
11 mins
12 mins
13 mins
ANSWER:
c.
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 153. Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Choices:
a.
b.
c.
d.
0.1N
0.5N
0.7N
0.3N
ANSWER:
d
SOLUTION ( IF PROBLEM -SOLVING)
Reference:
How to Solve Physics Problems, page 202 Robert and Daniel Oman
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( ) Engineering Mathematics
(x) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
It recommends interference protection ratios (IPR) for both analog and digital
television in co-channel operation.
Choices:
A. ITU-R BT.1268
B. ITU-R BT.1368
C. ITU-R BT.1468
D. ITU-R BT.1568
ANSWER:
B. ITU-R BT.1368
SOLUTION ( IF PROBLEM -SOLVING)
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( ) Engineering Mathematics
(x) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
It is a search technique inspired by biological and evolutionary behaviour utilizing
a population of chromosomes that represents the search space and determining
their fitness by a certain criterion.
Choices:
A. Genetic Algorithm
B. Neural Network
C. Knapsack Algorithm
D. DNA Algorithm
ANSWER:
A. Genetic Algorithm
SOLUTION ( IF PROBLEM -SOLVING)
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
Name of School
Address
Signature over Printed
Name , Position
Area of Specialization
Please indicate the subject:
( ) Engineering Mathematics
(x) General Engineering and Applied Science
( ) Electronics System & Technologies
QUESTION:
These are simple abstract computational devices intended to help investigate the
extent and limitations of what can be computed.
Choices:
A.
Widgets
B.
Compiler
ANSWER:
C. Turing Machines
D. Finite state automata
C. Turing Machines
SOLUTION ( IF PROBLEM -SOLVING)
IECEP Manila
TEST QUESTIONS
F1
3
4
12
5
240 N
Choices:
a. 698.9223 N, 56.310 with respect to the horizontal
b. 698.9223 N, 33.690 with respect to the horizontal
c. 698.9223 N, 56.310 with respect to the vertical
d. 698.9223 N along the horizontal
ANSWER: A
SOLUTION ( IF PROBLEM -SOLVING)
F 1X + 240(5/13) = 600 (4/5), F 1X = 387.6923 N
F 1Y 240(12/13) = 600(3/5), F 1Y = 581.5385 N
F 1 2 = (387.6923)2 + (581.5385)2, F 1 = 698.9223 N
= tan-1(581.5385/387.6923) = 56.310
Reference: Engineering Mechanics 3rd Edition by Ferdinand L. Singer page 63
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
2m
2m
Choices:
a. 90 KN up, 3.33m fr A
c. 90 KN up, 3.33m fr B
ANSWER: B
2m
6m
3m
b. 90 KN down, 3.33m fr A
d. 90 KN down, 3.33m fr B
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
B
300 N
Choices:
a. 1024.7681 N
b. 7936.1959 N
c. 138.6873 N
ANSWER: C
SOLUTION ( IF PROBLEM -SOLVING)
d. 69.3437 N
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
d. 509.1146 N
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
UNIVERSITY OF SANTO TOMAS
Name of School
Espana Blvd., Manila
Address
Signature over Printed
Name , Position
Ma. Luisa T. Asilo, Faculty
Area of Specialization
d. 455.56 m
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
UNIVERSITY OF SANTO TOMAS
Name of School
Espana Blvd., Manila
Address
Signature over Printed
Name , Position
Ma. Luisa T. Asilo, Faculty
Area of Specialization
d. 22 m/s
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
V 1 = 10 m/s
280 N
25 m
Choices:
a. 0.67
b. 0.67 N
c.
0.2626 N
ANSWER: D
SOLUTION ( IF PROBLEM -SOLVING)
102 = 2a(25), a = 2 m/s2
Fx = ma x, 280 600 = (600/9.8)2, = 0.2626
d. 0.2626
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
PROFILE OF CONTRIBUTOR
UNIVERSITY OF SANTO TOMAS
Name of School
Espana Blvd., Manila
Address
Signature over Printed
Name , Position
Ma. Luisa T. Asilo, Faculty
Area of Specialization
300
Choices:
a. 2.714m
b. 3m
c. 5.714m
d. 5.428m
ANSWER: A
SOLUTION ( IF PROBLEM -SOLVING)
WE equation: Fs = 0.5m(v2 v 02)
400(3) -0.2(350sin 30)(3+x)-(350sin 30)(3+x) = 0.5 (350/9.8)(0-0)
X = 2.714 m
Reference: Engineering Mechanics 3rd Edition by Ferdinand L. Singer page 536
Endorsed by:
School Representative
IECEP Manila
TEST QUESTIONS
30
O
If the system is replaced by an equivalent single force, which of the following is its
x and y intercept.
Choices:
a. 4 m right and 2.3094 above the origin
b. 4 m left and 2.3094 above the origin
c. 4 m left and 2.3094 below the origin
d. 4 m right and 2.3094 below the origin
ANSWER:C
SOLUTION ( IF PROBLEM -SOLVING)
sin 30 = 2/x, x = 4m left of origin
tan 30 = y/x, y = 2.3094m above the origin
Reference: Engineering Mechanics 3rd Edition by Ferdinand L. Singer page 64
Endorsed by:
School Representative
IECEP Manila