Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.jcm-american.com
ID = AntistaticKit.jpg
ID
Version*
Check
Sum
WBA-10/11-SS
ID-003
V-3.34-25
DBA9
WBA-10/11-SS
ID-022/023
V-3.34-03
7FCF
WBA-10/11-SS
ID-024
V-3.34-29
FF9F
WBA-12/13-SS
ID-003
V-3.34-21i*
1185
WBA-12/13-SS
ID-0C3
V-3.34-09i*
F1C3
WBA-12/13-SS
ID-003 (Aristocrat)
V-3.34-22i*
11DB
WBA-12/13-SS
ID-003 (Spieio)
V-3.34-23i*
FA6F
WBA-12/13-SS
ID-003 (Bally/Atronic/SDG)
V-3.34-25i*
2994
WBA-12/13-SS
ID-022/023
V-3.34-03i*
5A07
WBA-12/13-SS
ID-044C
V-3.34-05i*
144E
WBA-12/13-SS
ID-044
V-3.34-05i*
FD8D
WBA-12/13-SS
ID-023B
V-3.34-04i*
DF4E
WBA-12/13-SS
ID-024
V-3.34-27
8999
DBV-200-B0/B1
ID-022/023
V-2.51-04-03
32FC
DBV-200-A2/A3
ID-004/BAR
V-2.50-05
8F51
DBV-200-A2/A3
ID-044P/045P
V-2.50-05
8BD0
5B42
DBV-200-A2/A3
ID-011/015
V-2.50-09
DBV-200-A2/A3
ID-044/045W
V-2.50-04
5151
DBV-200-A2/A3
ID-044WP/045WP
V-2.50-05
D273
DBV-200-B4/B5
ID-024
V-2.50-09
070D
DBV-200-B4/B5
ID-003
V-2.50-02
44EE
UNIT
Check
Sum
ID
Version
TSP-02
033
2.01
C11F
TSP-02
2.04
ECCF
TSP-02
2.04
EE7F
TSP-02
024LT (Lottery)
2.00
4E33
TSP-02
2.00
798E
TSP-02
024NV (Nevada)
2.00
8566
TSP-02
2.00
EB22
TSP-02
2.00
6B31
TSP-02
033IL (Illinois)
2.00
7D8F
TSP-02
2.00
95C5
TSP-02
2.00
6558
TSP-02
033NV (Nevada)
2.00
6178
TSP-02
2.00
8EB8
The list of JCM bill validator software provided herein notifies customers
of the latest versions developed. However, the listing does not identify
versions approved by gaming jurisdictional authorities for actual use.
Customers should consult JCMs Customer Service/Parts Sales
departments concerning approved versions for jurisdictions of intended
use.
The JCM Ticket In - Ticket Out Solution ... Reliability, Durability, Productivity
The TSP-02 (Thermal Security Printer) by JCM was specifically designed to meet the needs
of your Ticket In - Ticket Out casino operation. Our printer is designed to outlast the
competition. With printers in the field that have been running for over two years with no field
issues, JCM takes pride in the technology used in our printer solution. By designing the bill
validator and the companion printer to go with it, JCM can guarantee the maximum in
acceptance rates and printed ticket quality. Contact your local JCM Sale Representative today
for additional information.
1
Mar.
Apr.
Southern Louisana
Central California
Western Michigan
Montana
Fresno, California
Technical Tips
Question: What's the best way to troubleshoot the WBA?
Answer: Use the built in diagnostic tests and the JCM Quick Reference Guide,
P/N 960-000027.
Workbench Method Start by setting the DIP Switch Block to the following positions:
ID = WBABookletsmMono.jpg
Switch 8 to ON and Switches 1 through 7 to OFF. This action puts the WBA into the test mode.
Apply power to the Bill Validator, and observe the two LEDs located next to the DIP Switches.
JCM is a registered trademark of JCM American Corporation. All other product names mentioned herein may be registered
trademarks or trademarks of their respective companies. Furthermore, TM and are not mentioned in each case in this publication.
2
Both LEDs should illuminate within a few seconds. If only one illuminates, and the second briefly
flashes, a software error condition is indicated. If this condition occurs, replace the EPROM or
re-download the software if the WBA contains flash memory.
JCM Quick Reference Guide
If neither LED illuminates, check the power supply and harnessing. The Bezel LEDs will be
flashing at a constant rate if the unit is operating properly. If the Bezel LEDs flash a specific number of times, pause, and repeat
the flashing sequence, count the number of flashes and refer to the JCM Quick Reference Guide error code table to determine
the condition being reported. The best way to locate a fault is by using the Bill Acceptance Test as follows:
With a Cash Box and frame, turn on DIP Switches 1, 2, 3 & 4. Without a Cash Box, just turn on DIP Switches 1, 2 & 3.
Now turn DIP Switch 8 OFF to start the test. The unit will cycle once and be ready to accept bills. Test the unit with several
different bills. If the unit fails for any reason, count the number of flashes indicated by the Bezel LEDs and refer to the JCM
Quick Reference Guide error tables to determine the condition being reported. The JCM Quick Reference Guide also contains
several other tests to further diagnose which component is causing the fault indicated.