Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.innovativecombustion.com
Fax: (205) 664-4556
Lengths
Available
Type of
Median
Typical
Applications
Characteristics of
Traverse Plane
Forward-reverse
Velocity Probe
Typical Lengths:
6, 8, 10, 12, and 15
Air/Flue Gas
Straight
Ductwork
Fecheimer Probe
Typical Lengths:
6, 8, 10, 12, and 14
Air/Flue Gas
Fan Tests
42 Standard Length
In Service burner
line or other dust
laden environment
Dust Laden
Environments
Pitot Tube
Air
Primary or Secondary
clean air
Notes: 1. Custom lengths are available for Forward-Reverse, Fecheimer, and Dirty Air probes.
2. With the exception of the pitot tubes all connections are TIG welded for leak-proof operation.
3. Pitot tubes have silver soldered connections for leak-proof operation.
www.innovativecombustion.com
Fax: (205) 664-4556
Length
of
Part Number
Probe
Cost
ICT-FW-06
$650
ICT-FW-08
$700
10
ICT-FW-10
$750
12
ICT-FW-12
$800
15
ICT-FW-15
$850
INCLINE
MANOMETER
S-TYPE PROBE
OW
FL
www.innovativecombustion.com
Fax: (205) 664-4556
FECHEIMER PROBE
Length
of
Probe
Part Number
Cost
ICT-FECH06
$1,150
ICT-FECH08
$1,200
10
ICT-FECH10
$1,250
12
ICT-FECH12
$1,300
14
ICT-FECH14
$1,350
FAN B
DAMPER
INLET BOX
FAN A
INLET BOX
www.innovativecombustion.com
Fax: (205) 664-4556
10' INCLINE
MANOMETER
FLOW
DIRTY AIR
PROBE
STATIC
(TOP)
DETAIL DIRTY AIR PROBE
BOTTOM VIEW
IMPACT
(BOTTOM)
APPLICATIONS
Identify Instances of High Primary Airflow
Ascertain Pulverizer Air Flow Balance
Determine Pulverizer In-Leakage Values
Verify Pulverizer Heat Balance Calculations
Determine Minimum Line Velocity
Quickly Ascertain Pulverizer Outlet Air/Fuel Ratios
PART NUMBER
Cost
ICT-ICK -02
$975
www.innovativecombustion.com
Fax: (205) 664-4556
PITOT TUBE
Pitot tubes are the standard probe for
velocity head measurement.
The
standard L-shaped Pitot Tube should
be used whenever possible for
measurement. Typically, this probe is
used mainly during clean air tests on
the individual burner lines to determine
airflow balance in the absence of fuel.
Secondary air flow measurement can be
conducted with the pitot tube whenever
possible, however due to test port
layout, access is often restricted. In
cases when it is not possible or feasible
to use a pitot tube, a Forward-Reverse
probe should be used.
Length of
Probe
Part Number
Cost
12
ICT-PTT-12
$38.50
18
ICT-ICK -18
$41.00
24
ICT-PTT-24
$43.00
36
ICT-PTT-36
$49.00
ICT-PTT-48
$50.50
ICT-PTT-60
$59.00
ICT-PTT-96
$160.00
STATIC
PRESSURE
FLOW
STATIC
PRESSURE
TOTAL
PRESSURE
TOTAL
PRESSURE
10" INCLINE
MANOMETER