Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
COMPASS
COMPASS 2000.0
Release Notes
Part No. 156964
Landmark/Asia Pacific
11th Floor Menara Tan & Tan
207 Jalan Tun Razak
50400 Kuala Lumpur
Malaysia
Tel: 011-60-3-2164-1121
Fax: 011-60-3-2164-1135
Help Desk: 011-61-8-9481-4488
Email: apsupport@lgc.com
Landmark/EAME
Benchmark House
203 Brooklands Road
Weybridge, Surrey KT13 ORH
England
Tel: 011-44-193-282-9999
Fax: 011-44-193-283-2000
Help Desk: 011-44-193-2832100
Landmark/The Americas
15150 Memorial Drive
Houston, Texas 77079
U.S.A.
Tel: 281-560-1000
Help Desk: 281-560-1200
Fax: 281-560-1168
Email: support@lgc.com
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Database Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . .
DFW Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Reporting Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Support Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Page 1 of 17
December 2000
Landmark
COMPASS
General
Version 2000.0 is the newest 32-bit version of the COMPASS directional drilling program
designed for Windows 95, 98, NT 4.0, and Windows 2000.
COMPASS 2000.0 is now certified for Windows 2000 and Oracle 8.3. Otherwise, this is a
maintenance release of COMPASS.
Page 2 of 17
December 2000
Landmark
COMPASS
Drilling Targetadded a Notepad button to list the computed drilling target points in Local,
Map and Geographic coordinates.
Wellpath Optimizehas various enhancements to enable Domain Charts, like Target Depth &
Departure and hydraulic limit calculations.
Wellbore Planner Importcan now import wells with undefined surface location, as well as
targets with underscores in their names.
Traveling Cylinders Viewhas improvements to the color list and clipping of zones outside
the circle.
Tool Codes Editoradded a New button to allow successive editing of new tool types.
Plan Editornow has a Course Length column and input to help planning projected sections
in coiled tubing drilling.
Anti-collision Reportshave removed the High and Right columns and added the offset well
coordinate North and East as viewed in the spider plot.
Magnetic Calculatorthe user can now select field, site, well or user-specified location with
depth for the magnetic calculation.
Anticollisionthe user can now choose (on the interpolation interval dialog) to have offset
TVDs referenced to the offset datum OR the reference wellpath datum.
Survey Program Editorhas added the Planning Mode to identify the processes to be made for
planning the surveys, the well, or after the well has been drilled and surveyed.
Target Editor View Windownow has textural information on the current target.
Project Ahead From Surveynow shows the to-bit projection in the grid and notepad results.
Transfer File Importnow indicates the destination company, field, site, and well, and shows
what is to be overwritten. It also checks with the user before locked data will be overwritten.
A Targets Only report can be made from Site level Target report when nothing else is selected.
It will show which targets are assigned to each well.
Page 3 of 17
December 2000
Landmark
COMPASS
ISCWSA Tool Terms dialog now fits on 800 x 600 screen and can be resized.
Configurable Survey Export to file has some additional entriesrefer to the help file for these.
Page 4 of 17
December 2000
Landmark
COMPASS
Installation Notes
The basic, trouble-free installation procedures for this release are outlined beginning on page 8.
For more detailed coverage of the procedures, refer to the COMPASS 2000.0 Installation Guide.
The installation can be one of three types:
Single User
Network Server
Network/Client
Page 5 of 17
December 2000
Landmark
COMPASS
Database Issues
COMPASS 2000.0 has been tested on the following databases:
Sybase SQL Anywhere Single User (v5.5.04)
Sybase SQL Anywhere Multi User (v5.5.04)
Oracle 8.3.
COMPASS 2000.0 is NOT compatible with any COMPASS database 1998.2 or earlier. An
upgrade is required. Transfer files from older versions will also not be compatible.
COMPASS 2000.0 does not require the Intersolv ODBC drivers to access an Oracle database. The
Oracle ODBC drivers (available as a free download from www.oracle.com) can be used instead.
Since COMPASS 2000.0 is a 32-bit program, 32-bit ODBC drivers and a 32-bit version of
SQL*Net (also available from the Oracle Corp.) must be used.
Installation Issues
When using the package for the web installation, you may get a message asking Do you
wish to Overwrite *.CAB files. Select Yes to All and the installation will continue
normally.
If you install COMPASS in the Program Files directory, you will be required.to install
the license manager (LAM) in a different directory (Landmark\LAM). Landmark is
moving to using FLEXlm licensing for all PC products from 2001; this licensing service is
available in COMPASS 2000.0 to enable users to migrate earlier.
If you install COMPASS and are repeatedly informed that the installation needs to upgrade
the operating system, it is possible that the contents of the your TEMP folder are
preventing the Microsoft-supplied MDAC install from running correctly. If this occurs,
please perform the following steps. If this doesn't correct the problem, contact Landmark
support.
COMPASS 2000.0 Release Notes
Page 6 of 17
December 2000
Landmark
COMPASS
1.
2.
3.
Page 7 of 17
December 2000
Landmark
COMPASS
Page 8 of 17
December 2000
Landmark
COMPASS
4. After the MDAC v2.51 is installed, you will be greeted by the Landmark Installation screen.
6. Use this screen to enter your name and your company name. Click Next to continue.
Page 9 of 17
December 2000
Landmark
COMPASS
7. Use this screen to select between a network and a single user installation. (This screen does
not appear during a network client installation.) After you have selected the installation type,
click Next to continue.
Network Install places all files on a shared drive in preparation for installation on client
computers. A network install does not include any type of shared database.
Single User Install copies all required files and configures the computer to run COMPASS.
A single-user install includes a single-user database system.
Page 10 of 17
December 2000
Landmark
COMPASS
8. Use this screen to select the ODBC data sources and drivers that setup will install. This screen
does not appear during a server installation.
Single User database: COMPASS includes the database engine and a sample database.
Multi User database: COMPASS installs only the ODBC drivers. You must buy and install
the database and database engine.
To use COMPASS with an Oracle database, you must obtain the Oracle software from the
Oracle corporation. For information about using COMPASS with an Oracle database, consult
the full COMPASS installation guide.
9. Click Next to continue.
Page 11 of 17
December 2000
Landmark
COMPASS
10. Use this screen to specify the folders where you want COMPASS installed. Default folders are
provided. To select another folder, use the Browse button. If this is a Single User install, and
you have chosen to install the Single User SQL Anywhere data source, you can select the
folders for the sample and unit management databases. Click Next to continue.
11. COMPASS can now be licensed using the FLEXlm license system. Use this screen to
specify the folder where COMPASS setup should install the FLEXlm license file. The license
file (named license.dat) is not included with this install and must be obtained from Landmark
licensing.
If you do not intend to use FLEXlm licensing, accept the defaults.
12. Click Next to continue.
Page 12 of 17
December 2000
Landmark
COMPASS
13. Use this screen to review your installation choices. If you need to change any of your choices,
click the Back button. If you are satisfied with your selections, click Next to start copying and
installing files.
14. If the COMPASS installation finds an existing COMPASS database, the installation procedure
will offer to update the existing database. Click Yes to upgrade the database, or No to leave the
existing database as it is.
15. You can choose to restart your computer automatically now, or to restart it yourself later. You
must restart your computer before COMPASS will run properly. Once you have made your
selection, click Finish to complete the install.
This concludes the installation procedure.
Page 13 of 17
December 2000
Landmark
COMPASS
DFW Import
The DFW survey import functionality is still available in COMPASS 2000.0. However, because
COMPASS 2000.0 is a 32-bit program, it can no longer use the same ODBC data sources as DFW
(DFW is a 16-bit program).
To use the DFW survey import, the user must first create 32-bit system ODBC data sources that
have the same name as the 16-bit DFW data sources with 32-bit appended. This must be done
for both the DSN-Data and the DSN-System data sources.
For example: to create a duplicate of a 16-bit DFW DSN-Data ODBC data source called
Foundation Data that refers to a Microsoft Access database:
1. Install the 32-bit Microsoft Access ODBC driver.
2. Open up the ODBC administrator (go to Start
on the 32-bit ODBC icon).
Page 14 of 17
December 2000
Landmark
COMPASS
Reporting Problems
If you experience problems while using COMPASS, please contact Landmark Support at one of
the sites listed in the section of these notes titled Support Locations. When reporting problems,
please include: the COMPASS version and build number (refer to Help About for this
information), the operating system (Windows 95, 98, NT, or Windows 2000), the installation type
(local or network), and a list of detailed steps leading to the problem or any other relevant
information that would help reproduce the problem.
Page 15 of 17
December 2000
Landmark
COMPASS
Support Locations
Page 16 of 17
December 2000
Landmark
COMPASS
Trademarks
Landmark, 3DVIEW, ARIES, Automate, BLITZ, BLITZPAK, CasingSeat, COMPASS, Contouring Assistant, Decision Suite,
Decisionarium, DecisionSpace, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam
Interpreter, DESKTOP-PVT, DESKTOP-VIP, DEX, DFW, DIMS, Drillability Suite, DrillModel, DSS, EarthCube, EdgeCa$h, Fast
Track, FZAP!, GeoDataLoad, GeoLink, GRIDGENR, I2 Enterprise, iDIMS, LogEdit, LogPrep, MathPack, OpenBooks,
OpenExplorer, OpenJournal, OpenSGM, OpenVision, OpenWorks, PAL, Parallel-VIP, PetroWorks, PlotView, Point Gridding Plus,
Pointing Dispatcher, PostStack, PostStack ESP, PROFILE, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMAX
MVA, ProMAX VSP, RAVE, Reservoir Framework Builder, RMS, SafeStart, SeisCube, SeisMap, SeisModel, SeisWell, SeisWorks,
SigmaView, StrataMap, Stratamodel, StratAmp, StrataSim, StratWorks, StressCheck, SynTool, SystemStart, SystemStart for
Clients, SystemStart for Servers, SystemStart for Storage, T2B, TDQ, TERAS, TOW/cs, TOW/cs The Oilfield Workstation, Trend
Form Gridding, VIP, VIP-COMP, VIP-CORE, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIPPOLYMER, VIP-THERM, Wellbase, Wellbore Planner, WELLCAT, WELLPLAN, ZAP! and Z-MAP Plus are trademarks of
Landmark Graphics Corporation.
All other trademarks are the property of their respective owners.
Page 17 of 17
December 2000