Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
A. switch to switch
B. switch to hub
C. switch to router
D. hub to hub
E. router to PC
48. Which type of cable is used to connect the COM port of a host to the COM port of a router or
switch?
A. crossover
B. straight-through
C. rolled
D. shielded twisted-pair
133. Which two Ethernet fiber-optic modes support distances of greater than 550 meters?
A. 1000BASE-CX
B. 100BASE-FX
C. 1000BASE-LX
D. 1000BASE-SX
E. 1000BASE-ZX
142. Refer to the exhibit. What type of connection would be supported by the cable diagram shown?
A. PC to router
B. PC to switch
C. server to router
D. router to router
143. Refer to the exhibit. What type of connection would be supported by the cable diagram shown?
A. PC to router
B. PC to switch
C. server to switch
D. switch to router
162. Which two topologies are using the correct type of twisted-pair cables? (Choose two.)
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
E. Exhibit E
Explanation
Devices of the same layer are connected by crossover cable, while devices of different layers are
connected by straight-through cable.
Router ------ Crossover ------- Router
Router ------ Crossover ------- PC
Router ------ straight-through ------- Switch Switch ------ straight-through ------- PC Switch ------ Crossover ------ Switch
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
309. Refer to the exhibit. Two buildings on the San Jose campus of a small company must be
connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about
possible problems from voltage potential differences between the two buildings. Which media type
should be used for the connection?
A. UTP cable
B. STP cable
C. coaxial cable
D. fiber optic cable
327. The left describes some types of connections, while the right describes some types of cables.
Drag the items on the left to the proper locations.
A.
PC to Router
Crossover
B. Pc to switch
Straight-through
Rollover
373. The left describes the types of cables, while the right describes the purposes of the cables. Drag
the items on the left to the proper locations.
A. Straight-through
B. Crossover
switch to switch
C. Rollover
545. Refer to the graphic. A host is connected to switch port Fa0/3 with a crossover cable. The host
and switch have as shown. However,the port indicator on switch port Fa0/3 is not on,and the host
can not communicate with to vlan 2 on the same switch. Based on the information given. what is the
problem?