Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SCLS085C DECEMBER 1982 REVISED NOVEMBER 2002
D Typical tpd = 11 ns
D 4-mA Output Drive at 5 V
D Low Input Current of 1 A Max
SN54HC14 . . . J OR W PACKAGE
SN74HC14 . . . D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
1
14
13
12
11
10
1Y
1A
NC
VCC
6A
VCC
6A
6Y
5A
5Y
4A
4Y
2A
NC
2Y
NC
3A
3 2 1 20 19
18
17
16
15
14
9 10 11 12 13
6Y
NC
5A
NC
5Y
3Y
GND
NC
4Y
4A
1A
1Y
2A
2Y
3A
3Y
GND
SN54HC14 . . . FK PACKAGE
(TOP VIEW)
NC No internal connection
description/ordering information
These Schmitt-trigger devices contain six independent inverters. They perform the Boolean function
Y = A in positive logic.
ORDERING INFORMATION
PDIP N
SN74HC14N
Tube
SN74HC14D
SN74HC14DR
SOP NS
SN74HC14NSR
HC14
SSOP DB
SN74HC14DBR
HC14
Tube
SN74HC14PW
SN74HC14PWR
CDIP J
Tube
SNJ54HC14J
SNJ54HC14J
CFP W
Tube
SNJ54HC14W
SNJ54HC14W
TSSOP PW
55C
125C
55 C to 125
C
TOP-SIDE
MARKING
Tube
SOIC D
40C
40 C to 85C
85 C
ORDERABLE
PART NUMBER
PACKAGE
TA
SN74HC14N
HC14
HC14
LCCC FK
Tube
SNJ54HC14FK
SNJ54HC14FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
FUNCTION TABLE
(each inverter)
INPUT
A
OUTPUT
Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
SCLS085C DECEMBER 1982 REVISED NOVEMBER 2002
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
UNIT
NOM
MAX
MIN
NOM
MAX
1.8
VCC
VCC
VCC
VIL
Supply voltage
VI
VO
Input voltage
Output voltage
SN74HC14
MIN
VCC = 6 V
1.8
VCC
VCC
0
0
TA
Operating free-air temperature
55
125
40
85
C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
SCLS085C DECEMBER 1982 REVISED NOVEMBER 2002
TEST CONDITIONS
VCC
VT+
VT
MIN
MAX
MAX
2V
0.7
1.2
1.5
0.7
1.5
0.7
1.5
4.5 V
1.55
2.5
3.15
1.55
3.15
1.55
3.15
6V
2.1
3.3
4.2
2.1
4.2
2.1
4.2
2V
0.3
0.6
0.3
0.3
4.5 V
0.9
1.6
2.45
0.9
2.45
0.9
2.45
6V
1.2
3.2
1.2
3.2
1.2
3.2
UNIT
0.6
1.2
0.2
1.2
0.2
1.2
0.4
0.9
2.1
0.4
2.1
0.4
2.1
6V
0.5
1.3
2.5
0.5
2.5
0.5
2.5
2V
1.9
1.998
1.9
1.9
IOH = 20
20 A
4.5 V
4.4
4.499
4.4
4.4
6V
5.9
5.999
5.9
5.9
IOH = 4 mA
IOH = 5.2 mA
4.5 V
3.98
4.3
3.7
3.84
6V
5.48
5.8
5.2
5.34
2V
0.002
0.1
0.1
0.1
IOL = 20 A
4.5 V
0.001
0.1
0.1
0.1
6V
0.001
0.1
0.1
0.1
4.5 V
0.17
0.26
0.4
0.33
6V
0.15
0.26
0.4
0.33
6V
0.1
100
1000
1000
nA
40
20
10
10
10
pF
IOL = 4 mA
IOL = 5.2 mA
VI = VCC or 0
VI = VCC or 0,
SN74HC14
MIN
0.2
VI = VIH or VIL
II
ICC
SN54HC14
2V
VI = VIH or VIL
VOL
TA = 25C
TYP
MAX
4.5 V
VT+ VT
VOH
MIN
IO = 0
6V
Ci
2 V to 6 V
SN54HC14
SN74HC14
MIN
MIN
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
2V
55
125
190
155
tpd
d
4.5 V
12
25
38
31
6V
11
21
32
26
2V
38
75
110
95
4.5 V
15
22
19
6V
13
19
16
tt
MAX
MAX
UNIT
ns
ns
TEST CONDITIONS
No load
TYP
20
UNIT
pF
SCLS085C DECEMBER 1982 REVISED NOVEMBER 2002
Test
Point
Input
VCC
50%
50%
0V
CL = 50 pF
(see Note A)
tPLH
In-Phase
Output
LOAD CIRCUIT
50%
10%
tPHL
90%
90%
tr
Input
50%
10%
90%
90%
tr
VCC
50%
10% 0 V
tPHL
Out-of-Phase
Output
90%
tf
VOH
50%
10%
VOL
tf
tPLH
50%
10%
tf
50%
10%
90%
VOH
VOL
tr
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
VOLTAGE WAVEFORM
INPUT RISE AND FALL TIMES
MECHANICAL DATA
MCER002C JANUARY 1995 REVISED JUNE 1999
J (R-GDIP-T**)
CERAMIC DUAL-IN-LINE
14 LEADS SHOWN
PINS **
14
16
20
A MAX
0.310
(7,87)
0.310
(7,87)
0.310
(7,87)
A MIN
0.290
(7,37)
0.290
(7,37)
0.290
(7,37)
B MAX
0.785
(19,94)
0.785
(19,94)
0.975
(24,77)
B MIN
0.755
(19,18)
0.755
(19,18)
0.930
(23,62)
C MAX
0.300
(7,62)
0.300
(7,62)
0.300
(7,62)
C MIN
0.245
(6,22)
0.245
(6,22)
0.245
(6,22)
DIM
B
14
7
0.065 (1,65)
0.045 (1,14)
0.100 (2,54)
0.070 (1,78)
015
0.014 (0,36)
0.008 (0,20)
0.100 (2,54)
4040083/E 03/99
NOTES: A.
B.
C.
D.
E.
MECHANICAL DATA
MCFP002A JANUARY 1995 REVISED FEBRUARY 2002
W (R-GDFP-F14)
0.260 (6,60)
0.235 (5,97)
0.045 (1,14)
0.026 (0,66)
0.008 (0,20)
0.004 (0,10)
0.080 (2,03)
0.045 (1,14)
0.019 (0,48)
0.015 (0,38)
14
0.050 (1,27)
0.390 (9,91)
0.335 (8,51)
0.005 (0,13) MIN
4 Places
8
0.360 (9,14)
0.250 (6,35)
0.360 (9,14)
0.250 (6,35)
4040180-2 / C 02/02
NOTES: A.
B.
C.
D.
E.
MECHANICAL DATA
MLCC006B OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
22
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
26
27
28
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
MECHANICAL
MPDI002C JANUARY 1995 REVISED DECEMBER 20002
N (R-PDIP-T**)
16 PINS SHOWN
PINS **
14
16
18
20
A MAX
0.775
(19,69)
0.775
(19,69)
0.920
(23,37)
1.060
(26,92)
A MIN
0.745
(18,92)
0.745
(18,92)
0.850
(21,59)
0.940
(23,88)
MS-100
VARIATION
AA
BB
AC
DIM
A
16
0.260 (6,60)
0.240 (6,10)
AD
8
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.015 (0,38)
Gauge Plane
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.010 (0,25) M
D
4040049/E 12/2002
MECHANICAL DATA
MSOI002B JANUARY 1995 REVISED SEPTEMBER 2001
D (R-PDSO-G**)
8 PINS SHOWN
0.020 (0,51)
0.014 (0,35)
0.050 (1,27)
8
0.010 (0,25)
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
1
0.010 (0,25)
0 8
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
0.004 (0,10)
PINS **
0.004 (0,10)
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
4040047/E 09/01
NOTES: A.
B.
C.
D.
MECHANICAL DATA
MSSO002E JANUARY 1995 REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
08
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
MECHANICAL DATA
MTSS001C JANUARY 1995 REVISED FEBRUARY 1999
PW (R-PDSO-G**)
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
7
0 8
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TIs terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding thirdparty products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265