Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TECHNICAL INFORMATION
SERIES 4100
HF Transceiver 500W
HF Transceiver 1000W
(D-Software Version)
Product Release 2.0
TECHNICAL INFORMATION
SERIES 4100
TECHNICAL INFORMATION
CONTENT
1
Overview ______________________________________________________________ 4
1.1
1.2
1.2.1
1.2.2
1.2.3
2.1
Specifications___________________________________________________________ 12
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
2.1.6
2.1.7
2.1.8
2.2
2.2.1
2.2.2
Voice communication___________________________________________________________ 7
Data Communication ___________________________________________________________ 7
Automatic Link Establisment (ALE) _______________________________________________ 7
HW Options ___________________________________________________________ 30
Digitally Tuned RF Selectors ____________________________________________________ 30
NMEA-Interface______________________________________________________________ 32
2.3
SW Options ____________________________________________________________ 32
2.4
Environmental Conditions________________________________________________ 33
SERIES 4100
TECHNICAL INFORMATION
History:
Version
Author
Date
Version 1.0
Knidlberger, 2GEP
08.01.2007
Version 2.0
Knidlberger, 2GEP
22.01.2007
Version 3.0
Knidlberger, 2GEP
14.02.2007
Version 4.0
Knidlberger, 2GEP
27.03.2007
Comments
SERIES 4100
TECHNICAL INFORMATION
1
OVERVIEW
The 500 W/ 1000 W-Transceivers of SERIES 4100 consist of an Exciter Unit
R&SGX4100D, Power Amplifier R&S 4150/VK4190 and Power Supply Unit
R&SIN4150/ IN4190.
FEATURES
Software-configurable and
upgradeable radios
User-friendly HMI
Local and Remote Control
Fail-safe 24-hour operation
High MTBF and low MTTR values
Conformance to STANAG-4203,
annexes B+C
SERIES 4100
TECHNICAL INFORMATION
1.1
General Information
The user interface is menu oriented and easy to use. The modern control philosophy
and the arrangement of the control elements allow an i ntuitive control of the radio.
The different radio modi (e.g. ALE, Modem) are administrated by so -called pre-set
pages. They contain a complete setting of the radios parameter and net specific
adjustments and allow the user to easily switch between different modi to achieve the
wanted interoperability between him and his partners.
These pre-set pages are comfortably put together with a PC based network
management tool, and then loaded into the radio via one of its digital interfaces (e.g.
Ethernet) or a special Fill Gun before a mission starts.
Software Defined Radios help to cut costs by skilled logistics.
The provision of spare parts, the whole goods handling process as well as the
expense for user training is reduced drastically compared to former generations of
radios.
SERIES 4100
The HF Transceiver Family SERIES 4100 can be used in shipborne and stationary
applications. The rugged hardware complies with the relevant MIL -STDs dealing with
environmental conditions. All radio functionality can be remote controlled by
appropriate SW or special naval communication SW solutions (e.g. R&S SIMCOS).
All components of a Series 4100 radio system are supervised by a Built-in test (BIT)
which provides three modi:
SERIES 4100
TECHNICAL INFORMATION
PBIT is performed always after powering the unit.
CBIT is performed permanently during operation.
IBIT is user-initiated BIT.
The BIT enables a failure location down to module level. Module failures are stored in
a log file for later evaluation.
SERIES 4100
TECHNICAL INFORMATION
1.2
Supported Services
Analogue Voice
The HF Transceiver Family SERIES 4100 is able to transmit and receive the
following signal emissions:
1.2.1.2
Digital Voice
Digital voice is realized by means of the R&SSECOM-H option and offers some
valueable features:
Series 4100 supports ALE (Automatic Link Establisment) of 2 nd generation in line with
FED-STD 1045/1046/1049.
SERIES 4100
TECHNICAL INFORMATION
2
TECHNICAL DESCRIPTION
HF TRANSCEIVER 500W
consisting of
Exciter
Amplifier
Power Supply
R&SGX4100D
R&SVK4150
R&SIN4150
HF TRANSCEIVER 1000W
consisting of
Exciter
Amplifier
Power Supply
(R&SXK4190D)*
R&SGX4100D
R&SVK4190
R&SIN4190
*The type designations R&S XK4150D and R&SXK4190D are used for
marketing purposes, only.
SERIES 4100
TECHNICAL INFORMATION
2.1
SERIES 4100
TECHNICAL INFORMATION
MR4100G
6118.9750.02
Operating Software
DS4100D
6119.7580.xx
Security Code
GC3000
6132.4400.02
Hardware Options:
GB4000C
6105.6006.02
FK4120
6119.5007.02
FK4140
6119.6003.02
GS4102
NMEA Interface
6119.3504.02
Software Options:
GS4101S
FED-STD1045/1046/1049
6120.6003.02
GS4102S
FED-STD1045/1046
6120.6103.02
GS4103S
SECOM-H
6120.6203.02
GS4112S
Link SW option
6120.6503.02
GS4115S
6120.6703.02
10
SERIES 4100
TECHNICAL INFORMATION
System Components (TRX 500W)
VK4150
VK4150
IN4150
6119.9002.03
6119.9002.13
R&S
Designation
Partnumber
Power
network
Voltage Input
IN4150
6120.0705.02
1/3PH (+N)
IN4150
6120.0705.12
DC
220 VDC
IN4150
6120.0705.03
3PH
440VAC ()
IN4190
6120.2708.02
1/3PH (+N)
6120.1501.03
6120.1501.13
6120.2708.02
1/3PH (+N)
IN4190
6120.2708.03
3PH
440VAC ()
6120.5007.04
ZF4103
6120.5207.02
ZF4107
6120.2808.02
11
SERIES 4100
TECHNICAL INFORMATION
2.1 Specifications
2.1.1 General Electrical Specifications
Requirement
Specification
Remarks
Frequency Range
RX:
TX:
Frequency Resolution
1 Hz
Frequency Accuracy
Short term:
aging:
Oven-controlled oscillator
External
1 / 5 / 10 MHz
Reference Frequency Input 0 dBm 3 dB, 50
Modulation Modes
A1A
A3E
H3E
B8E
B7D
F1B
F3E
EPM waveform
J3E+, J3E-,
USB/LSB selectable
J2D+, J2D
USB/LSB selectable
R&S SECOM-H
Data:
Voice:
Modem Waveforms
(internal)
STANAG 4285
Modem Waveforms
(ext. modem)
STANAG-4539, Annex B
STANAG-4415
STANAG-4285
STANAG-4529
STANAG-4481
MIL-STD-188-110B, App. F
Connection of LINK data terminal set
(radio parameters In line with
MIL-188-203-1A)
12
SERIES 4100
TECHNICAL INFORMATION
Requirement
Specification
Remarks
Encryption
(COMSEC)
Embedded COMSEC
Useable with
R&SSECOM-H
FED-STD 1045/1046/1049
Remote Control
Channel Memory
RS-232 (V28)
Ethernet Interface IEEE 802.3
(10 Mbps)
400 free programmable half-duplex
channels
1839 ITU channels (fixed programmed)
100 additional channels for ALE (halfduplex channels)
Preset Pages
Battery Input
Power Consumption
500 W Transceiver
max. 1.5 kW, cos > 95%
1000 W Transceiver
max. 3.6 kW, cos > 95%
RX/TX-Switching time
RX TX
10 ms (fix frequency
7 ms (LINK mode)
TX RX
10 ms (fix frequency
23 ms (LINK mode)
Fill Gun
Important International
Standards
13
Automatic switchover
between Power Supply
and DC battery input
SERIES 4100
TECHNICAL INFORMATION
2.1.2 Mechanical Specification
All members of the SERIES-4100 come with 19 rack adapters for the integration in
standard 19 racks.
Requirement
Remarks
Specification
Transceiver 500 W
R&SGX4100D
R&SVK4150
R&SIN4150*
Width = 19
Depth 481 mm
Height = 3 HU
Weight 13 kg
Width = 19
Depth = 570mm
Height = 6 HU
Weight = 34 kg
Width = 19
Depth = 570 mm
Height = 3 HU
Weight = 22 kg
Transceiver 1000W
R&SGX4100D
R&SVK4190
R&SIN4190*
Width = 19
Depth 481 mm
Height = 3 HU
Weight 13 kg
Width = 19
Depth = 570 mm
Height = 6 HU
Weight = 38 kg
Width = 19
Depth = 570 mm
Height = 3 HU
Weight = 22 kg
* T.B.D.
Dimensions for the Power Supplies 3PH/440VAC ()
IN4150 6120.0705.03 and IN4190 6120.2708.03
14
SERIES 4100
TECHNICAL INFORMATION
2.1.3 Transmitter Specifications
Parameter
Specification
Remarks
Operating Frequency
Frequency Resolution
1 Hz
Output Impedance
nom. 50
RF Output Power
Termination 50
(500W-System)
(1000W-System)
Termination 50
1000W-Transceiver
(R&S XK4190D)
RF Emergency Output
Power
Power Reduction at
antenna VSWR
500W-Transceiver
(R&SXK4150D)
500 W CW/PEP 1 dB
No cut off
at VSWR 1.5
at VSWR =
1000W-Transceiver
(R&SXK4190D)
1000 W CW/PEP 1 dB
No cut off
at VSWR 1.5
at VSWR =
15
[W PEP]
Unity used for the Non
Constant Envelope Modes
SERIES 4100
TECHNICAL INFORMATION
Parameter
Specification
Remarks
Transceiver 500 W
(at 500 W PEP)
36 dB (below PEP)
Transceiver 1000 W (at 1000 W PEP)
36 dB (below PEP)
Termination 50 Ohm
Termination 50
Termination 50 Ohm
Transceiver 500 W
(at 500 W CW )
-48 dBc, typ. -60 dBc
Termination 50
Spurious Emissions
TX modulation bandwidth
Voice (J3E):
BW = 3.1 kHz, 300 Hz 3400 Hz
Meas. conditions
(Measured with 25% of
max. output power, 50
termination)
Data (J2D)
BW = 2.75 kHz, 300 Hz...3050 Hz
Selective level control
Optional
16
SERIES 4100
TECHNICAL INFORMATION
2.1.4 Receiver Specifications
Parameter
Specification
Input Impedance
nom. 50 , VSWR 3
Oscillator Reradiation
at antenna Input
Sensitivity
Remarks
without preamplifier,
f 30 MHz
0.45 VEMF
1.1 VEMF
3.0 VEMF
2.24 VEMF
(B =300 Hz)
(B =2700 Hz)
(B=6000Hz, m=60%)
(B=6000Hz, m=70%)
R&SSECOM-H
(2.4 kbps BER<1.0E-2 @ -108 dBm
With preamplifier
A1A
J3E
H3E
A3E
R&SSECOM-H
(2.4 kbps, BER<1.0E-2 @ -115 dBm)
2nd Order Intercept Point
Without preamplifier
IP2 +60 dBm
measurement level
2 x 0 dBm
With preamplifier
IP2 +50 dBm
measurement level
2 x -10 dBm
Without preamplifier
IP3 +35 dBm
measurement level
2 x 0 dBm ,
f = 30 kHz
measurement level
2 x -10 dBm ,
f = 30 kHz
With preamplifier
IP3 +20 dBm
Inband IP3
IM3 40 dB
Image Rejection
80 dB, typ. 90 dB
meas. level
2 x 53 dBm,
frequency of audio tones
within
450 Hz ... 3050 Hz
17
SERIES 4100
TECHNICAL INFORMATION
Parameter
Specification
IF Rejection
90 dB
Crossmodulation
Blocking
Desensitisation
AGC Range
(without preamp)
AGC Attack Time
Remarks
without preamplifier
10% modulation
transfer
without preamplifier
without preamplifier
without preamplifier
MGC Range
(Manual Gain Control)
Range = 110 dB
(settable in 1 dB steps)
BFO
2 kHz in 10 Hz steps
Passband Tuning
2 kHz in 10 Hz steps
Delta Frequency
-J2D:
+J2D:
Squelch
Noise Blanker
18
SERIES 4100
TECHNICAL INFORMATION
Receive Bandwidths (3dB)
Min.
[kHz]
Max.
[kHz]
Default
F3E
6.0
8.0
No steps
8.0 kHz
A3E
3.5
8.0
H3E
2.1
3.1
2.4, 2.7
3.1 kHz
B8E
2 x 2.7
2 x 2.7
2.7 kHz
2.7 kHz
2 x 1.8
2 x 3.1
2 x 2.75
2 x 2.75
2.75 kHz
2 x 1.8
2 x 3.1
J3E+/J3E-
50 Hz
3.1 kHz
50 Hz - 250 Hz 50 Hz steps
300 Hz - 3.1 kHz
100 Hz steps
2.4 kHz
J2D+/J2D-
100 Hz
3.1 kHz
100 Hz steps
2.7 kHz
A1A
50 Hz
3.1 kHz
50 Hz - 250 Hz 50 Hz steps
300 Hz - 3.1 kHz
100 Hz steps
0.3 kHz
F1D / F1B
n.a.
n.a.
300 bd
B7D
500 Hz steps
6 kHz
100 Hz steps
2.75 kHz
100 Hz steps
Frequency Deviation
42.5 Hz, 85 Hz, 170 Hz, 425 Hz
19
SERIES 4100
TECHNICAL INFORMATION
2.1.5 Audio Specifications
The radio provides both a 600 line interface for the connection of external systems
(ship-internal intercom system) as well as a interface for Series 4100 audio
components as handset, headset or external speaker.
Parameter
Specification
Remarks
Audio In
Microphone Inputs
(NF7 connector)
AF Line Input
2 x LINE Input
20
LM = Link Mode
SERIES 4100
TECHNICAL INFORMATION
Audio Out
Headset Output 1
(NF7 connector)
Output voltage
U 4 VRMS at RL=300
Audio frequency response 2.5dB
(300 to 3050 Hz, J3E)
Modulation distortion
5% at 25 mVeff (F3E mode)
1% at 25 mVeff (all other modes)
AF Line Output
2 x LINE Output
Loudspeaker
Loudspeaker Output at
rearpanel
Output power 3 W at 4
Output power adjustable via frontpanel
Modulation distortion
5% at 25 mVeff (F3E mode)
1% at 25 mVeff (all other modes)
21
Connectable audio
accessories
R&SGA2100
R&SGA2120
R&SGA015
Connection of COTS
headsets
LM = Link Mode
SERIES 4100
TECHNICAL INFORMATION
2.1.6 Radio Interfaces (Exciter R&SGX4100D)
FILLGUN
INT/EXT
NF7
ERASE
Stereo 6.3 mm
ON / OFF
FILLGUN
NF7
(Headset Conn. 1)
Stereo 6.3 mm
(Headset Conn. 2)
INT/EXT
ERASE
ON/Off
LED
RF
On if transmission is active
LED
GO
LED
SQ
LED
BATT
LED
AC/DC
22
SERIES 4100
TECHNICAL INFORMATION
Rearpanel Receiver/ Exciter SERIES 4100
sep. RX antenna
TX/RX antenna
BATTERY
+28V ext.
POWER
REF-IN
Data RCB-Bus
(optical)
Audio/PTT
X10
REF-IN
X20
Remote Control
(LAN)
X24
Remote Control
(RS232)
RCB Serial
(optical)
X21
Remote Control
(LAN)
Remote Control
(RS232)
X23
Data Interface
X26
Audio / PTT
X2111
RX antenna
X2112
RX/TX antenna
X31
POWER
X32
BATTERY
23
SERIES 4100
TECHNICAL INFORMATION
2.1.7 Power Amplifiers R&SVK4150 /R&SVK4190
X23
X29
X24
X21
X28
X31
X27
X25
X20
X20
X21
X23
X24
X25
X26
X27
Not used
X28
Not used
X29
HF Interface to ATU
X31
24
SERIES 4100
TECHNICAL INFORMATION
2.1.8 Power Supplies R&SIN4150 /R&SIN4190
OVERVIEW
FEATURES
Automatic switchover between mains voltage supply and battery voltage supply in
case of mains malfunction
25
SERIES 4100
TECHNICAL INFORMATION
POWER SUPPLY MODELS (AVAILABLE)
Output
Power
Dimensions
WxHxD
47..63 Hz
2,23 kW
19 x 3 HU x 481 mm
+10%, -15%
47..63 Hz
2,23 kW
230VAC (Y)
+10%, -15%
47..63 Hz
2,23 kW
R&S
Designation
Partnumber
Power
network
Voltage Input
Tolerance
IN4150
6120.0705.02
1/3PH (+N)
+10%, -15%
208 VAC ()
SERIES-4100
Transceiver
500W
IN4150
6120.0705.12
DC
220 VDC
10%
2,23 kW
19 x 3 HU x 481 mm
IN4150
6120.0705.03
3PH
440VAC ()
20%
2,23 kW
t.b.d.
IN4190
6120.2708.02
1/3PH (+N)
+10%, -15%
47..63 Hz
2,23 kW
19 x 3 HU x 481 mm
IN4190
6120.2708.02
1/3PH (+N)
+10%, -15%
47..63 Hz
3,96 kW
19 x 3 HU x 481 mm
208 VAC ()
+10%, -15%
47..63 Hz
3,96 kW
230VAC (Y)
+10%, -15%
47..63 Hz
3,96 kW
440VAC ()
20%
SERIES-4100
Transceiver
1000W
IN4190
6120.2708.03
3PH
The mating connector set for the R&S IN4150/4190 power supplies has the order number 6120.2808.02.
26
3,96 kW
t.b.d.
SERIES 4100
TECHNICAL INFORMATION
Specifications
Display- and Control Elements
Front View
Frontpanel
Display- and control elements
Toggle Switch ON / OFF
LED, green
POWER
Indicates that mains voltage is applied to the power supply input X31
with the required voltage tolerance and the
power supply unit works correctly.
The LED POWER works also in the stand-by mode.
LED, green
BATT
27
SERIES 4100
TECHNICAL INFORMATION
LED, green
28V
Indicates that the converter for the 28VDC output works correctly and
provides a DC output voltage with the required votage tolerance.
LED is blinking in the transition to standby state and extinguishes in the
standby state.
LED, green
50V/I
LED, green
50V/II
Rear View
Rearpanel
Connectors and control elements
Main Control Switch
Connector X33
Interface Power Amplifier
28
SERIES 4100
TECHNICAL INFORMATION
29
SERIES 4100
TECHNICAL INFORMATION
2.2
HW Options
X32
6119.5007.02
R&SFK4140
6119.6003.02
Highlights are:
Five-pole lowpass (0 Hz to 1.5 MHz) for receive frequencies below 1.5 MHz
Parameter
R&SFK4120
R&SFK4140
Frequency range
Stopband attenuation
Input voltage protection
These Digitally Tuned RF Selectors improve several transmit and receive parameters
significantly.
30
SERIES 4100
TECHNICAL INFORMATION
Transmitter
Parameter
R&SFK4120
R&SFK4140
F0 1 kHz
-110 dBc/Hz
F0 1 kHz
-110 dBc/Hz
F0 30 kHz
-135 dBc/Hz
F0 30 kHz
-135 dBc/Hz
F0 10 %
-165 dBc/Hz
F0 5 %
-165 dBc/Hz
Receiver
Parameter
R&SFK4120
R&SFK4140
Sensitivity
(without preamplifier)
Sensitivity
(with preamplifier)
130 dB
typ. 6.3 VEMF
31
SERIES 4100
TECHNICAL INFORMATION
2.2.2 NMEA-Interface
By means of the NMEA interface SERIES 4100 can be integrated in naval GMDSS.
(Global Maritime Distress and Safety) systems. The NMEA0183 interface is a
standardized interface to control the SERIES 4100 transceivers by an ext.
DSC controller in cases of distress.
R&SGS4102
6119.3504.02
NMEA Interface
ATU
HF - TRX
NMEA0183
MF/HF DSC
Scan Receiver
+
Controller
Audio
SW Options
2.3
The following SW options are available for the RELEASE 1.0 of SERIES 4100
6120.6003.02
R&S GS4102S
6120.6103.02
R&SGS4103S
6120.6203.02
R&SSECOM-H
R&SGS4112S
6120.6503.02
R&SGS4113S
6120.6603.02
R&SGS4115S
6120.6703.02
R&S GS4101S
32
SERIES 4100
TECHNICAL INFORMATION
2.4
Environmental Conditions
Parameter
Specification
Notes
Temperature
(Operation)
Temperature
(Storage)
Humidity
Fungus
Permissible Altitude
Sinus Vibration
MIL-STD-167-1, type 1
1,5 - 0,15mm double amplitude and 4 Hz to
50 Hz Test Period: 40 min/axis
Random Vibration
Shock Resistance
33
SERIES 4100
TECHNICAL INFORMATION
Parameter
Specification
Electromagnetic
Compatibility
MIL-STD-461E
Notes
CE102
CE106
CS101
CS114
RE101
RE102
RS101
RS103
Electrical Safety
ETSI EN60950-1
ETSI EN60215-1
Cooling
MTBF
500W-Transceiver
>5500 h
1000W-Transceiver
>5000 h
MTTR
34
SERIES 4100
TECHNICAL INFORMATION
3
Term
Definition
A1A
Morse telegraphie
A3E
AF
Audio Frequency
AGC
ALE 2G
ALE 3G
AM
Amplitude modulation
AME
ASCII
B7D
B8E
B9W
BER
BFO
BITE
BPS
CBIT
Continous BIT
CE
Conducted Emission
COMSEC
Communication Security
CS
Conducted Susceptibility
DFF
DIN
ECCM
EMF
Electromotoric Force
EN
European Standard
EPM
F1D
F3E
Frequency modulation
FEC
FF
Fixed Frequency
FM
Frequency Modulation
35
SERIES 4100
TECHNICAL INFORMATION
FSK
GB2PP
GPS
H3E
HF
HMI
IP
Internet Protocol
ISB
Independent Sideband
J2B
J2D
J3E+
J3E-
LSB
MIL-HDBK
MIL-Handbook
MGC
MMI
MTBF
MTTR
NATO
PBIT
Power-on BIT
PC
Personal Computer
PEP
PSK
PTT
Push To Talk
R/C
Remote Control
RCB
RE
Radiation Emission
RF
Radio Frequency
RMS
RNMS
RS
Radiated Susceptibility
RSCA
RX
Receiver
36
SERIES 4100
TECHNICAL INFORMATION
SDR
SINAD
SSB
STANAG
Standardisation Agreement
SYNC
Synchronous
TX
Transmitter
USB
VOCODER
VSWR
WF
Waveform
37