Sei sulla pagina 1di 136

APPRAISAL REPORT # 2015RO-1476

THIS IS TO CERTIFY that at the request of operators Sapura Navegao


Martima Ltda. (Rio de Janeiro), from January 21st, 2015, we carried out a
general survey in order to issue a technical appraisal and inspection report on
the vessel:

NM " Sapura NIX "

Berthed at the dock of the yard Franklin Offshore Europe BV, located in
Rotterdam (Netherlands) in order to meet Ordinance Decex # 8 of May 13 th,
1991 and its subsequent amendments, issued by the Ministry of Development,
Industry and Foreign Trade of Brazil.

1 - Features:
The vessel Sapura Onyx was designed and built to perform the
following main operations:
Launch and recovery of flexible and umbilical lines of electrical and
hydraulic control;
Recovery of rigid lines;
General subsea constructions.
Operations with remote control vehicles.
According to the existing documentation the vessel has the following main
features:
Flag
Panamanian
Port of registry
Panama
Registration number 46144-Pext
Call sign
3 FYD 9
IMO Id number.
9702742
MMSI number
373-968000
Owner Registration Number
4191752
Construction site
IHC - Merwede Offshore &
Marine
Rotterdam
BV
(Netherlands) from November
2013 to April 2015
Delivery date
April 21st, 2015
Hull number
730
Rating
Lloyd's Register of Shipping
Class features
*100A1 Pipe Laying Ship, Helicopter
Lading
Area, WDL (10t/m 2 aft to fr.120),
ShipRight
ACS (B), LI, * IWS, ECO, * LMC,
CAC3, UMS ICC, DP (AA), NAV1,
IBS

Overall length
Length between perpendiculars
Molded breadth
Molded depth
Maximum draft
Minimum draft
Maximum height

145.95 meters
135.22 meters
29.94 meters
13.00 meters
8.30 meters
5.47 meters
63.00 meters

Deadweight
Gross tonnage
Net tonnage
Lightweight
Maximum capacity of lines
Generating power
Propulsion power
Speed
Dynamic Positioning
Owner
Legal representative in Panama
Parent company
Operator
Customer-

13,612 tons
18,098 tons
5,429 tons
13,603 tons
4,000 tons in carousels
24,730 kw
23,040 kw
13.6 knots
Class II
Sapura Onyx GmbH (Vienna)
Avila & Co. (Panama City)
SapuraKencana Petroleum Berhad
(Kuala Lumpur)
Sapura Navegao Martima Ltda.(Rio
De Janeiro)
Petrobras Petroleo Brasileiro SA
(Rio de Janeiro)

2 - Certificates:
The vessel Sapura Onyx has the following main certificates.
Issued by the Maritime Authorities of the Government of Panama
Republic.
Registration:
Provisional, issued in Singapore, on March 9th, 2015, and valid until
September 5th, 2015.
License Radio Station:
Provisional, issued in Singapore, on March 9th, 2015, and valid until
September 5th, 2015.
Minimum safety crew:
Issued in Singapore, on March 12, 2015, with no expiration date.
Continuous Synopsis Record:
Provisional, issued in Panama City on March 17th, 2015 and valid until
September 16th, 2015.
Liability for Damages Caused by Oil Pollution:
Issued in Singapore, on March 12th, 2015, and valid until February 20th,
2016.

Issued by the classification society Lloyd's Register of Shipping:


Tonnage:
Issued in Rotterdam, on October 27 th 2014 confirming the (gross) tonnage
of 18,098 tons and (net) tonnage of 5,429 tons.
Tonnage (Panama Canal):
Issued in Rotterdam, on October 27th, 2014, no expiration date.
Tonnage (Suez Canal):
Issued in Rotterdam, on January 15th, 2015, no expiration date.
Freeboard:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Building Safety:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Anti-fouling System:
Issued in Rotterdam, on April 21st, 2015 and no expiration date.
Oil Pollution Prevention:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Sewage Pollution Prevention:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20, 2020.
Air Pollution Prevention:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20, 2020.
Equipment Safety:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Special Purpose Ship:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Radio Safety:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020.
Inspection of Cranes:
Issued in Rotterdam, on April 21st, 2015 and no expiration date.
Protection of Ships and Port Facility:
Interim, issued in Rotterdam, on April 19th, 2015 and valid until September
18th, 2015.
Maritime Working (MLC-2006):
Interim, issued in Rotterdam, on April 19th, 2015 and valid until September
18th, 2015.
Class:
Issued in Rotterdam, on April 21st, 2015 and valid until April 20th, 2020,
confirming the class features *100A1 Pipe Laying Ship, Helicopter
Landing Area, WDL (10 t/m2 aft to fr.120) ShipRight ACS (B), LI, *IWS,
ECO, *LMC, CAC3, UMS, ICC, DP (AA), NAV1, IBS.
Dynamic Positioning System:

Issued in Rotterdam, on April 21st, 2015 confirming the class


characteristics "DP (AA)".
According to records from the classification society Lloyd's Register of
Shipping, the vessel 'Sapura Onyx "is in good standing in relation to its
initial class inspections.
Safety Management:
Interim, issued in Rotterdam, on April 19th, 2015 and valid until September
18, 2015.
"DOC" Compliance:
Interim, issued in Rio de Janeiro, on October 23rd, 2014 and valid until
October 22nd, 2019.
Upon arrival of the vessel in Brazil, the following main certificates are
expected to be issued.
The Directorate of Ports and Coasts (Ministry of the Navy):
Inspection of Ships (PSC).
Minimum Safety Crew (CTS).
Temporary Foreign Vessel Registration (AIT).
Helipad approval.
By the Ministry of the Environment:
Operating License.
By the National Agency for Sanitary Surveillance (Ministry of Health):
Sanitary inspection of vessel.
3 - Navigation Equipment:
The vessel Sapura Onyx has the following main navigation equipment
supplied and installed on the bridge by SAM Electronics BV
Gyrocompass:
Three gyrocompasses manufactured by Raytheon Anschutz GmbH, STD22, digital type.
The gyrocompasses above have the respective repeaters manufactured by
Raytheon Anschutz GmbH.
Automatic Pilot:
SAM Electronics BV, TrackPilot-BD-3030 model, connected to dynamic
positioning system.
Magnetic Needle:
Cassens & Plath GmbH, Binnacle-180 model, Standard type, and 180
mm.
Radar:

SAM Electronics BV, GR-3021G-90 model (14ft), S band, 10 cm,


colorful and equipped with harp.
SAM Electronics BV, GR-3020G-150 model (5ft), X-band, 3 inch,
colorful and equipped with harp.
GPS:
Two Saab Transponder Tech AB, R-4 navigation system model, linked to
dynamic positioning system.
Echo sounder:
Skipper AS, GDS-101 model, digital type.
Navtex Receiver:
SAM Electronics BV, model 2918.
The Navtex receiver above is provided with a Japan Marine Corp printer,
PR-950 model.
Weather Fascimile:
SAM Electronics BV, SAM-2953 model.
Odometer:
SAM Electronics BV, SAM-4682 model, digital type, two axis doppler bottom track speed log.
Automatic Identification System:
SAM Electronics BV, SAM-3410 model.
Data Recorder (VDR):
SAM Electronics BV, VDR- 4350 model, 8 gbyte-voyage data record and
H-106002-A.
System Control of Thrusters:
Kongsberg Maritime AS
Joystick:
Kongsberg Simrad AS, C-Joy model.
Bridge Alarm System:
SAM Electronics BV, DAP-2200BRG model BNWAS-Platinum watchbridge alarm system.
Footbridge Sound Capture System:
Jotron AS, Phontech-8200 model, wheel house sound reception system.
Electronic Nautical Charts Systems:
Two SAM Electronics BV, Multipilot ECDIS System type, equipped with
26 inch-color monitor.
Navigation lights panel:
Aqua Signal.
Master Clock:
Westerstrand Urfabrik AB, model 1717en-14 marine master clock.
Tilt indicators

Two Kongsberg Seatex AS, MRU-2 model.


One Kongsberg Seatex AS, MRU-5 model.
Besides the above equipment, the existence of speed indicators and wind
direction, sextants, binoculars, several letters and duly updated nautical
publications were verified.
4 - Communication Equipment
The vessel Sapura Onyx has the following main communication
equipment supplied and installed on the bridge and in the radio room by
SAM Electronics BV
GMDSS console:
Console for global maritime distress safety at sea manufactured by Thrane
& Thrane AS installed on the bridge and with the following major
components:
Inmarsat "C":
Two Thrane & Thrane AS, Sailor-3027 model.
Control unit:
Thrane & Thrane AS, Sailor-6301 model.
Message Terminal:
Two Thrane & Thrane AS, Sailor-6006 model.
MF-HF transceiver:
Thrane & Thrane AS, Sailor-6360 model.
VHF-DSC Radio:
Two Thrane & Thrane AS, Sailor-6222 model.
Alarms:
Two Thrane & Thrane AS, Sailor-6103 model.
Printers:
Two Thrane & Thrane AS, Sailor-H-1252B model.
Battery Charge panel:
Thrane & Thrane AS
Battery Charger:
Thrane & Thrane AS, 24 volts (300 a/h).
Inmarsat Fleet Broadband-500:
Thrane & Thrane AS, Sailor-500FBB model fleetbroad band, connected to
the respective TT-3672-A telephone.
V-Sat Communication systems:
Two communication systems designed and supplied by Harris-CapRock
Communications Inc, namely:
An operator communication system for the ship manufactured by SeaTel
Inc, full dual space track, and equipped with an antenna manufactured by
SeaTel Inc, 9707-D model, C-band, measuring 2.40 meters.

A communication system exclusively used by the customer manufactured


by SeaTel Inc. Gilat SA, 4009-7Gilat-F model, equipped with an antenna
manufactured by SeaTel Inc, model 4009, Ku- band.
VHF:
Eight manufactured by Thrane & Thrane AS, Sailor-6210 model.
UHFs:
Seven manufactured by Motorola Inc, GM-360 model, UHF transceivers.
Repeaters installed in various offices and work areas.
Automatic Identification System:
SAM Electronics BV, SAM-3410 model.
Safety Alert System:
Thrane & Thrane AS, TT-3000 SSAS model, ship security alert system.
Emergency Position Indicating Radiobeacon (EPIRBs):
One manufactured by Jotron AS, TRON-40-VDR float free model, 406 121.5 MHz.
Two manufactured by Orolia Ltd, Sport-Pro model, 406 MHz.
Radar Transponders:
Three sarts manufactured by Orolia Ltd, Kannad-Rescue-ER/2 model, 9
GHz.
Radio Beacon:
Tele Supply AS, JTM-30-C model, non directional radio beacon
transmitter.
VHF (aircraft):
Two Icom Inc, IC-A-210 model, fixed vhf-am transceiver, able to operate
at various frequencies.
Two Icom Inc, IC-A-6E model, portable airband handheld.
Weather Condition Monitoring;
Kongsberg Maritime AS, HMS-100 model, helycopter weather monitoring
system.
Walkie Talkies:
Five Thrane & Thrane AS, SP-3520 model (gmdss) equipped with
chargers and lithium batteries for use in emergency situations.
Four Uniden Inc, MH-126 vhf model, equipped with chargers.
Thirty Motorola Inc, DP-4400 uhf model, equipped with chargers.
It has been found that there are several duly updated radio publications.
The vessel has an indoor and general call communication system, namely:
Telephone System:
Telephone system designed and supplied by Zenitel Norway AS, ACM144-V-10 model, and Vingtor AB with one hundred ninety-one extensions
installed in various locations of the vessel.

According to the specifications (reference 30-TL-5000) the following


devices were installed by Alewijnse Marine Rotterdam BV:
One hundred and twenty-nine of desktop analog type manufactured by
Vingtor AB, DT-800-M model.
Two VAF analog flush type manufactured by Vingtor AB, VAF-1 model.
Thirty-three main station IP-65 type, waterproof, manufactured by Vingtor
AB, VMP-530 model.
Twenty-one hornloudspeaker (IP-65) type, manufactured by Vingtor AB,
VML-1520 model, 15-watt and 20 uhm.
Twelve headset with boom microphone manufactured by Vingtor AB,
VMP-36-PEL model equipped with a 10-meter cable.
Sixteen of IP type, flush master with display manufactured by Vingtor AB,
1008031000 model, and handsets 1008097100 model.
Four of IP type desk master and handsets manufactured by Vingtor AB,
1008001000.0202 model.
Seven wireless DECT handset manufactured by Cobs AB, C-3105 model.
General Call System:
General call system designed and supplied by Zenitel Norway AS and
Vingtor AB, TCIS-1-V model, public announcement and alarm system
with extensions installed in various locations of the vessel.
According to the specifications (reference 5000-PA-33) the following
speakers have been installed by Alewijnse Marine Rotterdam BV:
Eighty-five hornloudspeakers (IP-56) with ceramic manufactured by DNH
A/S, HP-15-T model, 15w - 100v.
One hundred and thirty-three PA ceiling speakers manufactured by DHN
A/S, BS-560-T model of 6 watts.
Forty-six double sided speakers manufactured by DHN A/S, CAR-6-T
model.
Three ceiling speakers manufactured by DNH A/S, SAFE-15 model, 6
watts.
Four amplifiers manufactured by Vingtor AB, SPA-400-V-2 model.
Telephone Emergency System:
Emergency telephone system (sound power telephone) designed and
supplied by Vingtor AB, VSP-211-ML model.
The system above has twelve extensions, namely:
Three devices installed on the bridge.
One device installed in the Diesel group emergency compartment (port
side of deck # 4).
Seven sets installed in compartments of the thrusters rooms # 1-7.
A device installed in the pipelay control room (port side of deck # 4).

Closed Circuit Video System:


Closed Circuit Video System designed and supplied by Alewijnse Marine
Rotterdam BV (reference 18-CT-5000) and Pelco Inc, namely:
Fifty-six cameras manufactured by Pelco Inc. with the following key
features:
Twenty-four cameras, 13VDIR 3-8.5 model, IR corrected-varifocal
cameras 1/3".
Twenty-four cameras, C-20-DW-6 model, box camera-day & night
650TVL 1/3CCD.
Eight cameras, ES-4136-5-W model, ESPT-41, ESTX-5X, ESIOP-36-XPTZ cameras.
The Closed Circuit Video System above has the following main control
and monitoring panels:
A central processing unit processing panel manufactured by Pelco Inc.,
CM-9700-CC1 model.
A record panel matrix bay manufactured by Pelco Inc, CM-9770-MXB
model.
A matrix relay interface unit manufactured by Pelco Inc, CM-9760-REL
model.
An alarm panel matrix alarm interface unit manufactured by Pelco Inc.,
CM-9760-ALM Model.
Seven keyboards control consoles manufactured by Pelco Inc, KBD-200A and KBD-300-A models, namely:
Two control consoles, KBD-200-A model, installed:
In the lay room (deck # 8).
In the pipelay control room on the port side of deck # 4.
Five control consoles KBD-300-A model, installed:
On the bridge (deck # 9).
In the office of the IOM unit manager (deck # 8).
In the office of the charterers inspector (deck # 8).
In the lay room (deck # 8).
In the control room of ROVs (deck # 8).
Twenty-three control 17-inch colored monitors manufactured by Pelco
Inc, PMCL-317B-LCD model.
The monitors above were installed on the bridge, at the radio room, in
various areas of work and several offices.
5 Life Saving Equipment:
The vessel Sapura Onyx has the following major life saving equipment:
Lifeboats:

Two closed and fire proof lifeboats manufactured by Jiangsu Jiaoyan


Marine Equipment Co., Ltd, and with the following characteristics:
Model
JY-QFP-7.5A1
Material
Glass Fiber
Dimensions
7.50 x 2.90 x 1.10 meters
Capacity
Sixty people
Propelled by diesel engine manufactured by Aabenraa Motorfabrik GmbH
with the following characteristics:
Model
DV-29RME
Power
21.3 kw
Revs
1,020 rpm
Speed
6 knots/hour
Automatic release hook:
Manufacturer
Jiansu Jiaoyan Marine Equipment Co.
Ltd.
Reference
3S-CAR-35-19
Model
CAR-35
Load
36 kN
Each lifeboat above has a hydraulic pivoting davit and the corresponding
hydraulic unit, designed and supplied by Palfinger Ned-Deck Marine BV,
namely:
Model
FFH-120
Capacity
120 kN (SWL)
Winch:
Manufacturer
Ned-Deck Marine BV
Model
15-01-R
Load
120 kN (2x60 swl)
Lift Speed
10 m/minute
Steel wire:
Type
Galvanized
Degree
1,920 kN/mm 2
Dimensions
16 mm x 63 meters
Driven by a three-phase electric engine:
Manufacturer
Rotor NV
Model
5RN-160-02V
Revs
3,505 rpm
Power
0,3kw - 440v - 0,88a - 60hz
Hydraulic unit:
A hydraulic pack unit designed and supplied by Palfinger Ned-Deck
Marine BV, namely:

Model
HPU-150
Power
7 kw
A submerged hydraulic pump driven by a three-phase electric engine:
Manufacturer
Rotor NV
Model
5RN-132-S04
Revs
1,735 rpm
Power
7kw - 440v - 12,3a - 60hz
A rectangular tank with a capacity of 0.20 m 3 of hydraulic oil.
Two 30 bar vertical batteries.
Life rafts:
Five life rafts designed and supplied by Viking Life-Saving Equipments
AS, with total capacity for seventy-four (74) persons, namely:
Model
RFD-Surviva-MK4
Type
Inflatable
Capacity
Sixteen and ten people
th
Port side of Deck # 5 (5 deck):
Two life rafts, RFD-Surviva-MK4 model, for up to sixteen people each.
Starboard side of Deck # 5 (5th deck):
Two life rafts, RFD-Surviva-MK4 model, for up to sixteen people each.
Port side of Deck # 4 (4th deck):
A life raft, RFD-Surviva-MK4 model, with a capacity for ten people.
The life rafts above have been duly certified by the manufacturer.
Each set of liferafts is provided with the corresponding manual slewing
davits with the following key features:
Port side of Deck # 5 (rib # 144):
A davit manufactured by Palfinger Ned-Deck Marine BV with the
following characteristics:
Model
SCM-14-3.5L
Capacity
15 kN (swl)
Release hook
CAR-35
Winch:
Model
04-04-M
Type
Manual
Load
15 kN (swl)
Starboard side of Deck # 5 (rib # 137):
A Davit manufactured by Palfinger Ned-Deck Marine BV with the
following characteristics:
Model
SCM-14-3.5L
Capacity
15 kN (swl)
Release hook
CAR-35

Winch:
Model
04-04-M
Type
Manual
Load
15 kN (swl)
Rescue boat:
A fast rescue boat designed and supplied by Jiang Yin Neptune Marine
Appliance Co. Ltd, located on the port side of deck # 5 (5 th deck), and with
the following characteristics:
Model
NPT-60-RB
Material
Glass Fiber
Dimensions
6.00 x 2.30 x 0.87 meters
Capacity
Six people
Propelled by a water jet system and diesel engine:
Water jet System:
Manufacturer
Alamarin Jet Oy
Model
Jet-230
Diesel engine:
Manufacturer
Steyr Motors GmbH
Model
MO-144M-38
Power
144 cv
Revs
3,700 rpm
Speed
20 knots
Automatic release hook:
Manufacturer
Jiansu Jiaoyan Marine Equipment Co.
Ltd.
Model
NPT-30 HKThe rescue boat above have a single slewing davit designed and supplied
by Palfinger Ned-Deck Marine BV, with the following characteristics:
Model
PRHE-25
Capacity
27 kN (swl)
Winch:
Load
36 kN
Launch speed
40 meters/minute
Recovery speed
18 meters/minute
Steel cable
16 mm x 70 meters
Driven by a three-phase electric engine:
Manufacturer
Rotor NV
Model
5RN-132-M04V
Revs
1,711 rpm
Power
18.5kw - 440v - 32,9a - 60hz

Hydraulic unit:
A small hydraulic pack unit designed and supplied by Brevini Fluid Power
SpA, namely:
Reference
RGM
Power
3 kw
Pressure
280 bar
A C 2 cylinder.
Lifebuoys:
Eighteen lifebuoys manufactured by Wuxi Xingtai Shipping Equipment
Co. Ltd, provided by Viking Life Saving Equipments AS, and distributed
at various locations of the vessel.
Sixteen lifebuoys, XT-5555-2.5kg model (1022623), 2.50 kg, namely:
Six lifebuoys without fittings.
Two lifebuoys fitted with nylon throwline.
Eight lifebuoys equipped with light.
Two lifebuoys, XT-5555-4.3kg model (1,022,624) of 4.30 kg and equipped
with smoke and light.
Life Jackets:
One hundred and thirty-eight lifejackets manufactured by Viking LifeSaving Equipments AS, PV-9520 model.
The life jackets are equipped with whistle, and light manufactured by
Daniamant ApS, DAN-MR-3 model.
The life jackets above are distributed in boxes, and work areas, namely:
Deck # 3 (3rd deck):
Four life jackets distributed in a cabinet located in the engine rooms.
Deck # 4 (4th deck):
Ten lifejackets distributed in a box aft (port) deck 4 (4th deck).
A cabinet with ten inflatable lifejackets manufactured by Viking LifeSaving Equipments AS, PV-9320 model.
Deck # 6 (6th deck):
One hundred and twenty lifejackets divided into four boxes located port
and starboard of deck # 6 (6th deck).
Deck # 9 (9th deck):
Four life jackets distributed in a cabinet located on the bridge.
Immersion Suits:
Twenty-two immersion suits manufactured by Viking Life-Saving
Equipments AS, PS-2014-1058000 model.
Immersion suits above are distributed as shown below:
Deck # 4 (4th deck):
Ten immersion suits distributed in a box aft (port) deck # 4 (4th deck).

Deck # 5 (5th deck):


Six immersion suits distributed in boxes located port and starboard of deck
# 5 (5th deck).
Six immersion suits distributed in a cabinet near the rescue boat on the
port side of deck # 5 (5th deck).
In addition to the above specified equipment, the existence of multiple
flags (parachute, red flares, smoke), line-throwing appliance were verified,
among others, within the validity period.
The above equipment meets the requirements of the SOLAS Convention,
as amended.
6 - Fire Fighting Equipment:
For firefighting, the vessel Sapura Onyx has the following main
equipment:
Fire pumps:
Three main firefighting pumps with the following characteristics:
Manufacturer
Allweiler GmbH
Model
NAM-F65-250-02U-3.1d-V5-S-W133
Type
Centrifuge
Impeller
237 mm
Flow rate
90 m 3/minute (110 meters)
Driven by three-phase electric engine.
Manufacturer
Hoyer Motors AS
Model
HMC2-250-M-2
Revs
3,550 rpm
Power
57kw - 440v - 89a - 60hz
Pumps above were installed in both engine rooms (# 1 and 2) and the
compartment of the auxiliary storage winch to starboard.
A skid containing a firefighting & deck wash system designed and supplied
by Hatenboer Water BV, namely:
Flow rate
2 m 3/hour
Pressure
11 bar
The skid of the firefighting & deck wash system above features:
A water pump manufactured by Speck Pumpen GmbH with the following
characteristics:
Model
SK-2005LL13-4002
Type
Centrifuge
Flow rate
1.80 m 3/hour (110 m)
Driven by a three-phase electric engine:
Model
m2SIE-100LA-4

Revs
1,728 rpm
Power
2.5kW - 440v - 5,1a - 60hz
A hydrophore tank supplied by Hatenboer Water BV with the following
characteristics:
Model
DWB
Type
Vertical
Volume
500 liters
Pressure
11 bar
Fire stations:
Fifty-four water hydrants.
Fifty-four fire hoses and related fittings manufactured by Jakob Eschbach
GmbH, of the following types: SyntheticPolydur and Synthetic-Polydur-N,
namely:
Twenty-eight 2 inch x 15 meter fire hoses.
Eighteen 2 inch x 20 meter fire hoses.
Nine 1.5 inch x 20 meter fire hoses.
Valves:
Eight main valves of the fire main section valves.
Two valves of the deluge section valves.
Fixed Foam System:
Fixed Foam System of the helipad designed and supplied by Matre Maskin
AS, with the following main features:
Model
M-SKD-11-04604
Flow Rate
2351 liters/minute
Pressure
7 bar
The system above features:
A horizontal tank with a capacity for 680 liters of foam fluid (lge) of the
following type:
Manufacturer
Dafo fomtec AS
Type
Fomtec-AFFF-3%
Several foam fluid horns and the corresponding deck integrated
firefighting system installed on the helipad.
Fixed Water Mist system:
Fixed Hi-Fog system designed and provided by Marioff Corporation Oy
serving the two engine rooms, incinerator compartments, and the high and
low-voltage switchboards having the following main components mounted
on two skids:
A skid:
Reference
14-11006365-1
Model
SPU-05 + 1M/A1/AA0/0

Six sets of two high pressure plunger pumps manufactured by Otto Speck
GmbH & Co. KG with the following characteristics:
Model
NPE-25/41-140/160
Type
Plunger
Revs
1,450 rpm
Flow Rate
40.6 liters/minute
Pressure
140 bar
Each set of two pumps above driven by a three-phase electric engine:
Manufacturer
ABB Motors Oy
Model
M3AA 160MLB-4Revs
1,565 rpm
Power
15.5kw - 440v - 26,4a - 60hz
A filter/water separator, namely:
Manufacturer
Lakos Co.
Model
IL-0250-S
Flow Rate
95-155 gls/min
Pressure
12 psi
A break-water tank supplied by Marioff Corporation Oy.
A skid:
Reference
14-11006365-1
Model
SPU-0S-05 + A1/AA0/0
Five sets of two high pressure plunger pumps manufactured by Otto Speck
GmbH & Co. KG with the following characteristics:
Model
NPE-25/41-140/160
Revs
1,450 rpm
Flow Rate
40.6 liters/minute
Pressure
140 bar
Each set of two pumps above driven by a three-phase electric engine:
Manufacturer ABB Motors Oy
Model
M3AA-160MLB-4
Revs
1,769 rpm
Power
15,5kw - 440v - 26,4a - 60hz
A filter/water separator, namely:
Manufacturer Lakos Co.
Model
IL-0250-S
Flow
95-155 gls/min
Pressure
12 psi
A break-water tank supplied by Marioff Corporation Oy.
The skids above have other lines, valves, actuators and actuation devices.
Sprinklers:

Several sprinklers manufactured by Marioff Corporation Oy, Hi-Fog-1000,


distributed in various locations of the vessel.
Fixed CO 2 system:
Fixed CO 2 system designed and supplied by Ajax-Chubb Brandbeveiliging
BV, serving the compartment of the Emergency Diesel Generator group.
The fixed CO2 system above has five cylinders of 45 kg CO 2 (each),
totaling 227 kgs.
Fixed Suppression System:
Fixed suppression system (KS-2000) designed by Ajax-Chubb
Brandbeveiliging BV and supplied by Minimax GmbH & Co. serving the
kitchen.
Fire extinguishers:
Several (portable and semi-portable) foam fire, dry chemical and CO 2
extinguishers, distributed at various points of the vessel, namely:
Portable fire extinguishers:
CO 2:
Nine 5 kg fire extinguishers.
Three 6 kg fire extinguishers.
A 12-kg extinguisher.
Foam:
Fifty-nine 9-liter fire extinguishers.
Dry chemical:
Eight 6 kg extinguishers.
Semi-Portable fire extinguishers:
Dry chemical:
Four 25kg fire extinguishers.
Foam:
A 135-liter fire extinguisher.
Three 45-liter fire extinguishers.
Five 20-liter foam applicator units.
All extinguishers above have been tested and certified.
Fire Alarm and Detection System:
Marine fire controller detection system designed and supplied by
Alewijnse Marine Rotterdam BV (Reference 20-FD-5000) with the
following main features:
Panel:
Panel manufactured by Consilium AB, Salwico Fire Detection type
installed on the bridge, and repeater installed in the engine rooms.
Detectors:

One hundred and thirty-four analogue photoelectric addressable optical


smoke detectors manufactured by Consilium AB, Salwico EV-P model,
including the corresponding holders and adapters of the following types:
NS-2-IP55 and SPB-Adapt-SCI.
One hundred and seventy-one analogue photoelectric addressable optical
smoke detectors manufactured by Consilium AB, Salwico EV-P model,
including the corresponding UB-6 holders
Two analogue optical smoke detectors (explosion proof) manufactured by
Consilium AB, Salwico EVC-PY-IS-Ex model installed in the pain locker
(deck # 5) and the coshh store (deck # 6)
A analogue addressable heat detector manufactured by Consilium AB,
Salwico EV-H-84-IP55 model.
Two analogue addressable heat detectors manufactured by Consilium AB,
Salwico EV-H1-AR-54C model.
Five analogue addressable heat/smoke detectors manufactured by
Consilium AB, Salwico EV-PH-54-IP42 model.
Nine triple frequency flame detectors manufactured by Consilium AB,
Salwico AC-IR-3FQ-IP67 model.
Alarm activation:
Two push buttons for activating the general alarm manufactured by Zenital
Ltd, SPA-AC-6D model, located on the bridge.
Forty addressable manual call point manufactured by Consilium AB,
MCP-A-SCI-5200030-02B model, located in various internal areas of the
vessel.
Forty-four addressable manual call point manufactured by Consilium AB,
MCP-A-SCI-5200031B-WP-IP67 model, waterproof, located in various
areas of external vessel.
Flags:
Twenty-nine visual light column manufactured by Alewijnse Marine
Rotterdam BV, 24-SP model of 24 Vdc.
Twenty-nine sound horns manufactured by E-2S, A-112-NDC-24R model.
Twenty-nine led-rotating light orange units manufactured by Gyroled BV,
22304 model, of 12-24V/12w.
A sounder & red beacon manufactured by Fulleon BV, 100 dB, installed in
the kitchen.
Gas Detection System:
Fixed Gas detection System designed and supplied by IHC Drives &
Automation BV
According to the specifications (21GD-5000 reference) the following gas
sensors were installed by Alewijnse Marine Rotterdam BV:

Eight H2S detectors manufactured by Honeywell Inc, SPXCDALMHX


model installed in basements # 1 and 2 (baskets # 1 and 2).
Eight CH4 detectors manufactured by Honeywell Inc, SPXCDALMO1
model installed in basements # 1 and 2 (baskets # 1 and 2).
Eight O2 detectors manufactured by Honeywell Inc, SPXCDALMFX
model, installed, namely:
Two detectors in basements # 1 and 2 (baskets # 1 and 2).
Two detectors at the base of the main crane to starboard of the main deck #
4 (4th deck).
Two detectors at the base of the auxiliary crane on the port side of deck # 4
(4th deck).
Two detectors in the compartments of the sensors of the HiPap reference
system to port and starboard.
The detectors above are connected to the vessel management system.
Portable Gas Detector:
A gas detector (CO, CH4, H2S and O2) manufactured by Mine Safety
Appliances Co, Atair-5X model, multi gases portable detector.
Firefighters accessories:
Eleven full firefighters accessories and various pieces equipment for
firefighting work in aircrafts.
Twelve self-contained breathing cylinders manufactured by Spasciani Srl,
0857-115-11 model, 6 liters, 300 bars, and equipped with the respective
supports and masks.
Two self-contained breathing cylinder manufactured by Brude Ltd, 6 liters,
300 bars, and equipped with the respective supports and masks.
Thirteen spare self-contained breathing cylinders manufactured by
Spasciani Srl, 0857-115-11 model, 6 liters and 300 bars.
Two spare self-contained breathing cylinders manufactured by Brude Ltd,
6 liters and 300 bars.
Air compressor:
An air compressor to refill the self-contained breathing cylinders,
manufactured by Holuzt - Sauer GmbH with the following characteristics:
Model
HL-120
Type
Portable
Flow Rate
100 liters/minute
Pressure
330 bars
Driven by a three-phase electric engine:
Manufacturer
Soga
Model
MT2-90-LA-2
Revs
3,420 rpm

Power
2.2kW - 440v - 4,5 - 60hz
Escape sets:
Seventeen sets of emergency escape breathing devices manufactured by
Ocenco Inc., M-20.2 model with a maximum duration of 15 minutes.
All escape sets above have been tested and certified.
Safety Station:
In the safety station located aft deck#5 (5th deck) the following
panels/emergency work control systems were verified:
A valves quick closing system of diesel and lubricating oil tanks designed
by THC Offshore BV and supplied by OP Den Velde Industrie BV, driven
by air.
A control system for quick closing of several fire dampers from several
compartments designed and provided by Alewijnse Marine Rotterdam BV
A control system for quick closing of fire dampers from the compartments
of oil separators, from the diesel emergency generator and the chimneys of
the two engine rooms designed and supplied by Alewijnse Marine
Rotterdam BV
The above-mentioned systems have an emergency control air compressor
designed and supplied by Gardner Denver Ltd, namely:
Model
501PURS-10-3836D405
Pressure
11 bar
Driven by a three-phase electric engine;
Manufacturer
Weg Equipamentos Eltricos S.A.
Revs
1,755 rpm
Power
1.5kW - 440v - 2,8a - 60hz
A compressed air vessel manufactured by Rednal Pneumatics Ltd, namely:
Reference
73938
Type
Horizontal
Volume
75 liters
Pressure
12 bar
A stop control panel of fans from various compartments designed and
supplied by Alewijnse Marine Rotterdam BV
A water mist release panel designed and supplied by Marioff Corporation
Oy.
Twelve manual hydraulic pumps o for the activation of the watertight
sliding doors designed and supplied by Winel BV
The above equipment meets the requirements of the SOLAS Convention,
as amended.
7 - Environmental Pollution Control Equipment:

The vessel Sapura Onyx has the following major environmental


pollution control systems:
Waste and Organic Material Treatment Systems:
Two units designed and supplied by Gertsen & Olufsen AS with the
following key features:
Model
BR-V-BS 11100BG
Dimensions
4.46 x 1.65 x 1.86 m
Type
Biocompact G&O Bioreactor 2x60
Hydraulic flow rate 11.10 m3/day
Organic flow rate
4.50 kg (bod 5/day)
Capacity
One hundred and twenty people
Each waste and organic matter treatment system above features:
A macerating pump manufactured by Orpu Pompenfabrik GmbH, namely:
Model
ES-135-4-1.1-1.3HB-HT55
Type
Centrifuge
Flow rate
10 m 3/hour (40 meters)
Driven by a three-phase electric engine:
Manufacturer
VEM Motors GmbH
Model
K21R-90-S-4-TS140
Revs
1,720 rpm
Power
1,3kw - 480V - 2,65a - 60hz
A discharge pump manufactured by Orpu Pompenfabrik GmbH, namely:
Model
ES-130-2.2-2.6HB-HT55
Type
Centrifuge
Flow Rate
14 m 3/hour (40 meters)
Driven by a three-phase electric engine:
Manufacturer
VEM Motors GmbH
Model
K21R-90-L-4-TS140
Revs
3,480 rpm
Power
2,7kw - 480V - 4,5 - 60hz
A blower separator manufactured by Becker Ltd, namely:
Model
DT-4:25 KFlow rate
30 m 3/hour
Pressure
670 mbar
Driven by a three-phase electric engine:
Model
FDR-90-S-85/4P
Revs
1,690 rpm
Power
1,3kw - 440v - 2,8a - 60hz
A UV light filter manufactured by Van Remmen UV Techniek BV, namely:
Model
W-1

Type
Vertical
A tank divided into four compartments (inlet tank, bioreactor, settling tank,
and clean tank).
The skid above has too many lines, valves, actuators and actuation devices.
Vacuum system of toilets:
Two Vacuumarator pumps of the exhaust system of toilets designed and
supplied by Jets Sanitary Systems AS, namely:
Model
15MB-D
Type
Vacuum
Flow rate
15 m 3/minute (15 meters)
Driven by three-phase electric engine:
Manufacturer
Lonne GmbH
Revs
3,450 rpm
Power
2.2kW - 440v - 4,6a - 60hz
Sanitary devices:
Seventy-nine flushing valves manufactured by Jets Vacuum AS, Charm
model.
Eight flushing valves manufactured by Jets Vacuum AS, 50M-FD-VPCVvac model.
Sewage Holding Tank:
According to the capacity plan, the waste and organic matter treatment
system comprises tank # 5 to starboard assigned as sewage holding tank
with a volume of 230.48 m3.
Water/Oil Separation System:
A unit designed and supplied by Blohm + Voss Industries GmbH with the
following key features:
Model
TMPB-2.5 model
Volume
600 liters
Flow Rate
2500 liters/hour
Pressure
3.5 bar
Temperature 1-50 C
The oil water separator above also has the following equipment:
An automatic activation and alarm device, namely:
Manufacturer
Deckma Hamburg GmbH
Model
ODM-24
Type
Digital
Set
15 ppm
A process pump designed and supplied by Getriebebau Nord GmbH,
namely:
Flow rate
10 m 3/hour

Gearbox:
Model
SK-01XF-80L/4RD
Reduction factor
5.62
Electric engine:
Model
80L/4RO
Type
Three Phase
Revs
1,700 rpm
Power
0,86kw - 440v - 1,81a - 60hz
The skid above has other lines, valves, actuators and actuation devices.
Oil waste Tanks:
According to the loading and stability manual, the vessel "Sapura Onyx"
has the following tanks for water, diesel and lubricating oil waste:
Oil/waste tank (between ribs # 012-009) 43.08 m 3
Dirty oil tank (between ribs # 146-144) 36.11 m 3
Waste tank # 1 (between ribs # 146-144) 8.20 m 3
Waste tank # 2 (between ribs # 119-112) 8.20 m 3
O/d waste tank (between ribs # 123-119) 13,90 m 3
Inc. waste tank (between ribs # 135-134) 1.10 m 3
Dirty water tank (between ribs # 128-123) 40.98 m 3
Tank (db) water drains (between ribs # 131-128) 24.59 m 3
Pumps:
Aft thrusters rooms direct bilge pumps:
Manufacturer
Allweiller GmbH
Model
NISM-80-250/01U3.1D-42/350-W3
Type
Centrifuge
Flow rate
134 m 3/hour (29.50 m)
Driven by three-phase electric engine:
Manufacturer
Hoyer Motors AS
Model
IEC-180L-4
Revs
1,750 rpm
Power
22,2kw - 440v - 40th - 60hz
Two dirty water bilge pumps installed in engine rooms # 1 and 2:
Manufacturer
Wilden Pumps Inc.
Model
XPX2/AAAAA-BNS/BNABN0721RR8544
Type
Membrane
Flow
5m3/hour
Pressure
3 bar
Driven by the air system.
A dirty waste oil pump:
Manufacturer
Wilden Pumps Inc.

Model
XPX2/AAAAA-BNS/BNABN0721RR8544
Type
Membrane
Flow rate
5m3/hour
Pressure
3 bar
Driven by the air system.
A sludge oil transfer pump:
Manufacturer
Wilden Pumps Inc.
Model
02-11968RR
Type
Membrane
Flow rate
5m3/hour
Pressure
3 bar
Driven by the air system.
Containment sets:
Four sets containing chemicals and containment and cleaning equipment
for use in emergencies, as provided for in the SOPEP manual.
Food shredders:
Two food disposers designed and supplied by Imperial Machine Company
Ltd. and installed in the kitchen, namely:
Model
FWD-725 model
Type
Electric
Revs
1,710 rpm
Driven by a three-phase electric engine of 0,56kw - 440v - 1.6a - 60hz.
Incinerator:
An incinerator designed and supplied by Teamtec AS with the following
key features:
Model
OG-400-CS
Capacity
500,000 kcal/hour (596 kw)
Flow rate (liquid waste) 65 liters/hour
(Solid waste) 200 kg/hour
A blower:
Supplier
TEAMTEC AS
Model
F50-45T
Driven by a three-phase electric engine:
Manufacturer
Freno BV
Power
0,63kw - 440v - 1,32a - 60hz
An oil heater:
Supplier
TEAMTEC AS
Model
TH-2000
Pressure
18 bar
Type
Three Phase

Power
2kw (3x440v)
An oil feeding pump supplied by TEAMTEC AS, namely:
Model
RDCZ-432J-5CE-1S
Type
Screw
Driven by a three-phase electric engine:
Manufacturer ABB Oy Motors
Revs
1,162 rpm
Power
0,45kw - 440v - -1,1a - 60hz
A control and monitoring panel:
Manufacturer
Allen Bradley Ltd.
Model
PanelView Plus600
Type
Digital
A sludge tank:
Model
EL-Heat
Type
Vertical
Volume
1100 liters
A screw sludge pump, and driven by an Electric engine, namely:
Manufacturer
LK
Model
7AA-90-G-02
Type
Three Phase
Revs
3,480 rpm
Power
2,55kw - 440v - fourth - 60hz
Trash Compactor:
A bale compactor designed and supplied by Deerberg Systems GmbH with
the following key features:
Located
Incinerator room
Model
DBP-V-504
Load
3000 kg
Capacity
25 kg
Driven by a three-phase electric engine:
Manufacturer
Adda Antriebstechnik GmbH
Revs
1,410 rpm
Power
1,1kw - 230v - 2,4a
Waste shredder:
A waste shredder designed and supplied by Delitek AS with the following
key features:
Located
Port to deck # 4
Model
DT-1575-SR
Dimensions
1.48 x 1.94 x 2.90 m
Torque
4,580 Nm

Driven by a three-phase electric engine and the corresponding reduction


valve:
Electric engine:
Manufacturer
Buonfiglioli Srl
Power
7.5kW - 440v - 12,7a - 60hz.
Reduction valve:
Manufacturer
Buonfiglioli Transmissions SA
Reduction factor
98.41
Garbage Collection system:
The vessel has equipment for the selective system for garbage collection.
The above-mentioned systems meet the requirements of MARPOL
Convention into force.
8 - Accommodations:
The vessel Sapura Onyx is provided with accommodation for a total of
one hundred and twenty (120) people distributed in seventy-eight (78)
cabins, namely:
Deck # 10 (10th deck):
A helicopter reception located amidships, and equipped as below:
A safety briffing television manufactured by Toshiba Ltd, 1510-1A1D000
model, 42 inches and DVD.
A bench with a desk and a chair.
Eight cabinets.
Twenty-three seats.
A change room equipped with twenty cabinets, and located on the port
side.
A bathroom located amidships.
Deck # 9 (9th deck):
An office assigned to the Captain office equipped with a desk, two chairs,
two files, one cabinet, located to the port side.
A lobby entrance of access to the walkway.
A bathroom.
A coffee corner equipped with cupboards and a refrigerator manufactured
by Gram Commercial AS, K-310RH-LM-3M model, 14kW, and located to
starboard.
Fore and aft bridge fitted with various navigation and communications
equipment.
Deck # 8 (8th deck):
Cabins:
Twenty individual and double cabins for a total twenty-seven crew
members, namely:

Seven cabins for two crew members.


Eight cabins for a crew member.
Five suites for a crew member, namely:
A suite for the unit manager.
A suite for the commander.
A suite for the chief engineer.
A suite for the second mate.
A suite for the customer.
The cabins and suites above are provided with the following fittings.
Double cabins:
Full bathroom, bunk beds, two cabinets, one two-seater sofa, a desk and its
chair, and a 19-inch TV.
Individual cabins:
Full bathroom, a bed, a cabinet, a two-seater sofa, a desk and its chair, and
a 19-inch TV.
Suite cabins:
Full bathroom, a double bed, two cabinets, a two-seater sofa, a three-seater
sofa, an armchair, two tables, a desk, two chairs, and a 19-inch TV.
A luggage locker located on the port side.
Electronic equipment room.
OIM office equipped with a desk and its chair, a file, a table of eight seats
for meetings and chairs.
Supervisors office equipped with two desks and chairs, a file, a table of
six seats for meetings and chairs.
Radio room.
A cleaning locker located to starboard.
A bathroom.
A locker located to starboard.
A coffee corner located to starboard.
Operations room.
Deck # 7 (7th deck):
Cabins:
Thirty-six individual and double cabins for a total fifty four crew
members, namely:
Eighteen cabins for two crew members.
Eighteen cabins for a crew member.
The double and individual cabins above are provided with the following
fittings.
Double cabins:

Full bathroom, bunk beds, two cabinets, one two-seater sofa, a desk and its
chair, and a 19-inch TV.
Individual cabins:
Full bathroom, a bed, a cabinet, a two-seater sofa, a desk and its chair, and
a 19-inch TV.
Two lockers located amidships.
Two lockers of materials located to starboard (external).
Deck # 6 (6th deck):
Cabins:
Twenty-two individual and double cabins for a total thirty-nine crew
members, namely:
Seventeen cabins for two crew members.
Five cabins for a crew member.
The double and individual cabins above are provided with the following
fittings.
Double cabins:
Full bathroom, bunk beds, two cabinets, one two-seater sofa, a desk and its
chair, and a 19-inch TV.
Individual cabins:
Full bathroom, a bed, a cabinet, a two-seater sofa, a desk and its chair, and
a 19-inch TV.
Two lockers located to starboard.
A cleaning locker located to starboard.
A locker located to starboard.
An infirmary located to starboard equipped with full bathroom, three beds,
cabinets, oxygen cylinders and other fittings and medicines.
A doctor's office equipped with a desk and two chairs.
Two lockers located on the port side.
Deck # 5 (5th deck):
A conference room located to starboard and equipped as below:
A table of ten seats and chairs.
A workbench with six cabinets.
A bookcase.
A video conference system manufactured by Polycom Ltd, HDX-7000
model, namely:
A Polycom Inc camera, EagleEye MPTZ-9 model.
A Polycom Inc microphone, 2201-23313-003 model.
A Polycom Inc box base, HDX-7000-HD model.
A Polycom Inc monitor, HDX-7000 model.

An office assigned to the ROV superintendent equipped with a desk, two


chairs, two files, and located to starboard.
A ROVs control office located to starboard and equipped as below:
Two complete consoles containing all control and monitoring devices of
ROVs.
A desk and chair, four files and a cabinet.
A ROV superintendent office equipped with a desk and chair, a cabinet, a
bookcase, and located to starboard.
A PDU room of electrical panels and transformers of the two remote
control vehicles.
A gymnasium located to starboard and equipped as below:
A treadmill manufactured by Life Fitness Inc, Flexdeck Shock Absorption
System model.
Two exercise bikes manufactured by Life Fitness Inc, CLSC model.
A weight machine manufactured by Life Fitness Inc, Fit Series-FIT-3
model equipped with leg press.
A cleaning locker located amidships.
Two toilettes located amidships.
A shower located amidships.
An internet lounge located to port and equipped with two tables of six
seats and the corresponding chairs and computers.
A recreation room located on the port side, and equipped as below:
Two 3-seater sofas.
Two armchairs.
A table of games with four seats and the corresponding chairs.
A TV lounge and video room located on the port side, and equipped as
below:
Two 3-seater sofas.
Five small tables and sixteen seats.
Two tables of four seats each game and their chairs.
A 42 inch TV connected to a satellite system manufactured by SeaTel Inc,
established Ku band antenna.
A phone booth located on the port side.
Two lockers located on the port side.
A linen store located on the port side.
Laundry:
An industrial laundry located on the port side, and equipped as below:
Washing Machines:
Four washing machines manufactured by Electrolux Laundry Systems AB
with the following characteristics:

Model
W-5-180-N
Type
Professional
Capacity
20 kg
Revs
1,000 rpm
Driven by three-phase electric engine of 13,5kw - 440v - 25th - 60hz.
Drying machines:
Four tumble dryers manufactured by Electrolux Laundry Systems AB with
the following characteristics:
Model
T-5550
Type
Professional
Capacity
30.50 kg
Driven by three-phase electric engine of 34,5kw - 440v - 46th - 60hz.
The laundry above has other fittings.
A safety store located on the port side.
A bosun store located forward (external).
A paints store located forward (external).
Deck # 4 (4th deck):
Offices:
A Petrobras technicians office equipped with a desk and chair, two files,
one cabinet, located to the port side.
A lay superintendent office equipped with a desk and chair, two files, one
cabinet, located to starboard.
A pipelay technicians office equipped with two double desks, four chairs,
eight files, eight cabinets, located to starboard.
A chief engineer office equipped with a desk, two chairs, a file, and
located to starboard.
A superintendent safety technician office equipped with two desks and
chairs, two files, one cabinet, located to the port side.
A commissioner chief stewart office equipped with a desk and chair, two
files, one cabinet, located to the port side.
A bonded store equipped with several shelves, and located on the port side.
A reception security equipped with a desk, three chairs, and located on the
port side.
A bathroom located to starboard.
Change room:
A male change room equipped with one hundred cabinets, and located on
the port side.
A female changing room equipped with ten cabinets and located to
starboard.
A locker located to starboard.

A cleaning locker located to starboard.


Two dry provisions stores equipped with several shelves located to
starboard.
Refrigerated cameras:
Four refrigerated cameras (meat, fish, vegetables, and cheese/milk)
designed and supplied by NR Koeling BV and located to starboard,
namely:
Meat camera:
Area
16 m 2
Temperature
-23 C
Cooling unit:
Manufacturer
Eco Coils & Coolers Ltd.
Model
CTE-068L8-ED
Thermal capacity
3 kw
Pressure
30 bar
Fluid
R-404A
Equipped with three fans powered by electric engine of 1,41w - 230v 50/60Hz.
Fish camera:
Area
20 m 2
Temperature
-23 C
Cooling unit:
Manufacturer
Eco Coils & Coolers Ltd.
Model
CTE-051L8-ED
Thermal capacity
2.4 kw
Pressure
30 bar
Fluid
R-404A
Equipped with three fans powered by Electric engine of 1,41w - 230v 50/60Hz.
Vegetables camera:
Area
26 m 2
Temperature
4C
Cooling unit:
Manufacturer
Eco Coils & Coolers Ltd.
Model
CTE-041-M-6
Thermal capacity
2.1 kw
Pressure
30 bar
Fluid
R-404A
Equipped with two fans driven by Electric engine of 1,41w - 230v 50/60Hz.

Cheese camera and Leites:


Area 13 m 2
Temperature 4 C
Cooling unit:
Manufacturer Eco Coils & Coolers Ltd.
Model-M-CTEG 6ED
Thermal capacity 1.3 kw
Pressure 28 bar
Fluid R-404A
Equipped with a fan driven by an Electric engine 0,47w - 230v - 50/60Hz.
Kitchen:
A full galley kitchen designed by Bouter BV, located amidships, and
equipped as below:
An ice-making machine manufactured by Gram Commercial AS automatic
type.
Two manufactured by refrigerators Metos Oy AB, MBC-500-R model free
standing refrigerators, 0.27 kw.
A manufactured by freezer Metos Oy AB, MBF-500-R free standing fridge
model, 0.65 kw.
A manufactured by refrigerator Gram Commercial AS, Midi model.
A manufactured by refrigerator Gram Commercial AS K-310RH-LM-3M
model.
A manufactured by refrigerator Gram Commercial AS, model K-410RHLM-5M, 0.29 kw.
A meat mincer meat grinder manufactured by Wodschow AS & Co, AR40-VL-1 model, and driven by a three-phase electric engine of 1,1kw 440v - 2,8a - 60hz.
A dough mixer Moretti Forni SpA manufactured by, iM-60-2 model, spiral
type, and driven by a three-phase electric engine.
A dough mixer manufactured by Metos Oy AB, Bear model, and driven by
a three-phase electric engine.
A potato peeler potato peeler manufactured by Imperial Machines
Company Ltd, MF-15 model.
A combi oven steamer manufactured by Rational International AG, CM101 CombiMaster-Plus model.
Two ovens ovens manufactured by Metos Oy AB, CHEF-240 model.
A proving cabinet greenhouse manufactured by Metos Oy AB, CHEF-200
model.
A manufactured by microwave comserv-Commercial Service, Menumaster
model 1800 w.

A small microwave, manufactured by JH Ltd.


Two fryers deep fryers fat manufactured by KPPERSBUSCH GmbH &
Co. KG, KCF-0028 model, and 18 kw.
A deep fat fryer manufactured by fryer Kppersbusch GmbH & Co. KG,
KCF-0035 model, and 10.85 kw.
Two manufactured by stoves KPPERSBUSCH GmbH & Co. KG, KCF0007 model, and 24.6 kw.
A manufactured by grill plate KPPERSBUSCH GmbH & Co. KG, KCF0109 model, and 10.8 kw.
A manufactured by grill plate KPPERSBUSCH GmbH & Co. KG, KCF0110 model, and 5.4 kw.
A manufactured by rice preparation equipment KPPERSBUSCH GmbH
& Co. KG, KCF-0041 model.
A heater d'manufactured by water Animo BV, Wiki-40n model 9000 w.
A heating console manufactured by food KPPERSBUSCH GmbH & Co.
KG, equipped with three heaters.
A cooling console manufactured by food KPPERSBUSCH GmbH & Co.
KG
A machine dishwashing dishwashing machine manufactured by Metos Oy
AB, Master model (Hood-130EL).
Two shredders food scraps food disposers manufactured by Imperial
Machine Company Ltd, FWD-725 model, powered by three-phase electric
engine of 0,56kw - 440v - 1.6 A - 60hz.
A manufactured by coffee machine Animo Coffee Convenience BV, CB25-W model.
A manufactured by coffee machine Animo Coffee Convenience BV,
M100-ZWART-99843 model.
A refriamento machine manufactured by juices Santos BV, 34-AV4 model,
the triple type.
A heating machine soups soup kettle AT-51588 type.
A toaster electric type, ET-DS-6 model 2500 w.
A machine for cutting manufactured by cold Funds BV, 834-S model, the
electric type.
Cafeterias:
A main dining room messroom for up to sixty people, located starboard
(forward), and equipped as below:
Five tables of eight seats, and each seat.
Two tables of six seats, and each seat.
Two tables of four seats and their chairs.

A cafeteria service duty crew messroom located on the port side (the
defendant), and equipped as below:
A table with four seats and their chairs.
A table seats six, and their chairs.
A manufactured by refrigerator Gram Commercial AS, model K-310RHLM-3M of 14 w.
Air Conditioning systems:
The accommodation is served by two major air-conditioning main chiller
systems water units designed and supplied by Heinen en Hopman BV,
namely:
Reference MARS-364.01.0001/2
Fluid R-134A
Capacity 670 kw
Water flow 110 m 3/hour
Pressure drop 0.66 bar
Temperature 38 C
Each air-conditioned unit has the following main equipment.
Two compressors:
Manufacturer Hanbell Precise Machinery Co. Ltd.
Model RC-2-510A
Type Screw Semi Hermetic Screw
Power 98 kw
Flow 611 m3/hour
2,2-2,6-3,0-3,5 factor Vi
Driven by three-phase electric engine of 110kw - 440v - 250a - 60hz.
Two capacitors
Supplier Provides Metalmeccanica Srl.
Model CB-2721076-2P
Casco-type tubes
Volume (hull side) 67 liters
(Side tubes) 44 liters
2x54 Flow m3/hour
Pressure drop 0.37 bar
Inlet temperature 38.0 C
45.7 C output
Two evaporators:
Supplier Provides Metalmeccanica Srl.
40271111 Model-C-3
Casco-type tubes
Volume (hull side) 251 liters

(Side tubes) 40 liters


Flow 110 m3/hour
Pressure drop 0.66 bar
Inlet temperature 12 C
output 6 C
The two air conditioning systems above have five central air distribution
units air handling units serving the accommodations and of the offices
designed and provided by Heinen en Hopman BV, namely:
An AC-01 unit:
Located Deck # 10
Manufacturer Heinen en Hopman BV
MARS-361.01.0001 reference
Serving Footbridge and reception- lounge
Thermal capacity 247 kw
Cooler:
Type Plate - fin
Water flow 9.10 kg/second
Pressure 28 kPa
6 Temperature 12 C
Fan:
RZR-15-450 model
Flow 20 679 m 3/hour
Pressure 2239 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,8a - 60hz
An AC-02 unit:
Located Deck # 8
Manufacturer Heinen en Hopman BV
MARS-361.01.0002 reference
Serving Deck # 6 - # 7 - # 8
Thermal capacity 345 kw
Cooler:
Type Plate - fin
Water flow rate 13.5 kg/second
Pressure 30 kPa
6 Temperature 12 C
Fan:

RZR-15-560 model
Flow 18 891 m 3/hour
Pressure 2552 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,9a - 60hz
An AC-03 unit:
Located Deck # 5
Manufacturer Heinen en Hopman BV
MARS-361.01.0003 reference
Serving Deck # 4 - # 5
Thermal capacity 381 kw
Cooler:
Type Plate - fin
Water flow rate 12.6 kg/second
Pressure 38 kPa
6 Temperature 12 C
Fan:
Flow 16 630 m 3/hour
Pressure 2380 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,9a - 60hz
An AC-04 unit:
Located Deck # 5
Manufacturer Heinen en Hopman BV
MARS-361.01.0004 reference
Serving Kitchen (deck # 4)
Thermal capacity 131 kw
Cooler:
Type Plate - fin
Water flow 5.10 kg/second
Pressure 45 kPa
6 Temperature 12 C
Fan:
RZR-15-280 model

Flow 5,155 m 3/hour


Pressure 1745 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
112M-4 model
Revs 1,730 rpm
4,6kw power - 440v - 8,48a - 60hz
A unit (CA-25):
Located Deck # 4
Manufacturer Heinen en Hopman BV
MARS-361.01.000 reference
Magazine serving the stairs
Thermal capacity 18 kw
Cooler:
Type Plate - fin
Water flow 0.70 kg/second
Pressure 33 kPa
6 Temperature 12 C
Fan:
TZR-01-225 model
Flow 1,920 m3/hour
Pressure 602 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
90S-4 model
Revs 1,750 rpm
1,3kw power - 440v - 2,69a - 60hz
Lift:
The accommodation and the engine rooms are serviced by a lift with the
following characteristics:
Located half-nau (ribs # 141 - 139-1/2)
Manufacturer Marine Lifts Holland BV
PE-1400 Model
Seven stops
Maximum load 1400 kg
Capacity Sixteen people
Speed 1.50 m/sec
Cabin dimensions 1.10 x 2.40 x 2.20 meters
Steel cable 6.5mm x 45 meters
Driving machine:

Manufacturer WHO Antriebstechnik GmbH


Model-AZHP 2-24-23H K527-016-A3Type Hypodrive
Driven by a three-phase electric engine:
Model M-132
Revs 1,440 rpm
7.5kW power - 440v - 14,5a - 60hz
The accommodations meet the requirements of the International Labour
Convention (ILO) in force.
9 - Propelling and auxiliary equipment:
For propulsion and maneuvering the vessel "Sapura Onyx" has three
azimuth compass thrusters thrusters, two retractable azimuth thrusters of
type retractable thrusters compass, two transverse bow thrusters and tunnel
thrusters, namely:
Rudderpropellers:
Three azimuth thrusters with the following characteristics:
Location thruster # 5 (ribs # 008/003)
Propeller # 6 (ribs #
008/003)
Propeller # 7 (ribs #
-001/-006)
Manufacturer Wartsila Propulsion Netherlands BV
Model FS-2510-363-NU
Type LMT
Power 2,950 kw
Speed 660 rpm
Propeller speed 215 rpm
Reduction factor 3.071
Rotating speed 2 rpm
Propeller:
Type Five blades
Fixed step
Diameter 3,000 mm
Material Cu-Ni-Al
Driven by three-phase electric engine:
Manufacturer Alconza SA
Model QOL-710L1-8FW
Speed 739 rpm
Power 2.950kw - 2x660v - 2x1.477a - 49,62hz
Cooling system:

Each Electric engine above has projetato cooling system and supplied by
VDL-Klima BV, namely:
16KDLD-243-1611-2-2 model
Type Air-water
Thermal capacity 125 kw
Volume 29 liters
Two fans the type centrfrugo, and driven by Electric engine
Manufacturer Siemens AG
Type Three Phase
Revs 1,775 rpm
11kw power - 440v - 18,1a - 60hz
Each azimuth azimuthal thruster propellant above also has:
Lubrication system:
& Lubrication system filtering lubricating oil system designed and
provided by Wartsila Netherlands BV (HY-54738 reference) with the
following components:
Two oil pumps lubricant lube oil pumps screw type, and driven by a threephase electric engine, namely:
Manufacturer AC Motoren GmbH
Revs 1,750 rpm
1,8kw power - 440v - 3,9a - 60hz
A cooler lubricating oil lube oil cooler manufactured by Universal
Hydraulik GmbH, namely:
Model EKM-1048-6-O-CN-UH
Casco-type tubes
Hull side:
Volume 21.8 liters
Pressure 1.8 mPa
Side tubes:
Volume 9 liters
Pressure 3.5 mPa
A lubricating oil filter lube oil filter manufactured by Parker GmbH,
namely:
Model 80CN110GEVM-3KG244
Vertical Type
Pressure 70 bar
936 602-G element
A lubricating oil tank lube oil tank provided by Parker GmbH:
Reference 9393810
Type Cylindrical

Capacity 67 liters
Pressure 10 bar
An oil tank auxiliary lubricant lube oil header tank supplied by Wartsila
Italy SpA:
Type Cylindrical
Capacity 770 liters
Giro System Steering System:
Rotating propeller system designed and supplied by Wartsila Netherlands
BV with the following components:
Three hydraulic motors for turning the steering thruster propellant motors,
namely:
Manufacturer Calzoni SpA
Model MR-190C-N1N1N1C1N
Five cylinders
Pressure 250 bar
Coupled to gearbox manufactured by Brevini Riduttori SpA:
ED-2090 model
Planetary type
Reduction factor 20
Hydraulic unit:
Each title propellant comprises a hydraulic power unit pack unit designed
and provided by Wartsila SpA Italy (Reference HY-54738), and equipped
with the following components:
Two hydraulic pumps submerged type and driven by three-phase electric
engine:
Manufacturer AC Motoren GmbH
Model FCM-280-S-4-HE
Revs 1,776 rpm
82,5kw power - 440/760V - 132.37/76,64a - 60hz
A filter filter manufactured by Universal Hydraulik GmbH, namely:
Model UKM-1012-5-T-CN-01
Vertical Type
Volume from 3.7 to 1.2 liters
Pressure 1.6 mPa
A rectangular type of tank with capacity of approximately 1.60 m 3
hydraulic oil.
In the azimuthal thruster compartment azimuth thruster # 7 it was found an
oil lubrication system auxiliary lubricating system designed and supplied
by CC Jensen AS, namely:
Model PTU-2-27/27PV-DE2H1PW

Equipped with a lubricant oil pump type screw and driven by a three-phase
electric engine, VEM Motors GmbH manufactured by, and 0.75kW - 440v
- 1,17a - 60hz.
A battery of cylindrical type and 20 liters.
Thrusters Azimuth Retractable type:
Two retractable azimuth thrusters of the type with the following
characteristics:
Location thruster # 1 (ribs # 167/163)
Propeller # 4 (ribs #
150/146)
Manufacturer Wartsila Propulsion Netherlands BV
Model FS-1510-350-MNR
Type LMT
Power 2,400 kw
Speed 90-900 rpm
Propeller speed 254 rpm
Reduction factor 3.538
Rotating speed 2 rpm
Shaft Length
3.75 m (retractable 3,20m)
Propeller:
Type Five blades
Fixed step
Diameter 2,500 mm
Material Cu-Ni-Al
Driven by three-phase electric engine:
Manufacturer Alconza SA
QOL Model 630-S-8FW
Revs 1,008 rpm
2.400kva power - 2x660v - 2x1.237a - 67,32hz
Each Electric engine has projetato cooling system and supplied by VDL
BV (Klima), namely:
16KDLD-253-1250-4-2 model
Type Air-water
Thermal capacity 107 kw
Volume 25 liters
Pressure 6 bar
Lubrication system:
Lubrication system propellant designed and provided by Wartsila
Propulsion Netherlands BV with the following components:

A lubricating oil pump of the screw type and driven by a three-phase


electric engine, namely:
Manufacturer AC Motoren GmbH
Revs 1,750 rpm
1.5kW power - 440v - 3,75a - 60hz
A lubricating oil filter Danfoss GmbH manufactured by, the vertical type.
Giro System Steering System:
Rotating propeller system designed and supplied by Wartsila Propulsion
Netherlands BV with the following components:
Three hydraulic motors for turning the steering thruster propellant motors,
namely:
Manufacturer Calzoni SpA
Model MR125-C N1M1C1-0400-65e1
Pressure 240 bar
Coupled to gearbox manufactured by Brevini Riduttori SpA of planetary
type.
System Vertical Retracting Drive System:
System of vertical movement of the retractable azimuth thruster features:
Two hydraulic cylinders.
Two tabs.
Hydraulic unit:
Two hydraulic pumps with the following characteristics:
PAAI052824-A Model
Type Vane
Flow 150 liters/minute
Driven by three-phase electric engine:
Manufacturer AC Motoren GmbH
FCM Model M-225-HERevs 1,770 rpm
49,5kw power - 440v - 80,28a - 60hz
A hydraulic oil cooler with the following characteristics:
Manufacturer Universal Hydraulik BV
Model UKM-714T-CN-G1-1/2LR
Casco-type tubes
A hydraulic oil filter with the following characteristics:
Manufacturer Parker GmbH
Model TTF-810-QLBP2EG-243
Pressure 10 bar
A rectangular type of tank with a capacity of 2.50 m 3 hydraulic oil.
A lube oil auxiliary lube oil tank header tank with the following features:

Manufacturer IHC Offshore Marine BV


Type Cylindrical
Capacity 770 liters
Drivers of Cross Type:
Two drivers of cross type with the following characteristics:
Location thruster # 2 (ribs # 168/157)
Propeller # 3 (ribs #
157/152)
Manufacturer Wartsila Propulsion Netherlands BV
Model CFT-300-HD
Type Tunnel bow thruster
Power 2,200 kw
Speed 890 rpm
Propeller speed 218 rpm
Reduction factor 890: 218
Propeller:
Type Four blades
Fixed step
Diameter 2,700 mm
Material Cu-Ni-Al
Driven by three-phase electric engine and its gearbox:
Manufacturer Alconza SA
QOL Model 630-S-8FW
Speed 920 rpm
2.200kva power - 2x660v - 2x1.135a - 61,8hz
Each Electric engine has projetato cooling system and supplied by VDL
BV (Klima), namely:
16KDLD-253-1250-4-2 model
Type Air-water
Thermal capacity 94 kw
Volume 25 liters
Pressure 6 bar
Lubrication system:
Lubrication system propellant designed and provided by Wartsila
Propulsion Netherlands BV with the following components:
A lubricating oil pump of the screw type and driven by a three-phase
electric engine, namely:
Manufacturer Bevi Motors Ltd.
Model 4AL-90S-4B
Revs 1,750 rpm

1,4kw power - 440v - 2,63a - 60hz


A lubricating oil filter manufactured by Parker GmbH, namely:
Model 80CN-120QBM3KG241
Vertical Type
Pressure 7 bar
In the drivers compartment cross transversal thrusters # 2 and 3 was found
an oil lubrication system auxiliary lubricating system designed and
supplied by CC Jensen AS, namely:
Model PTU-2-27/27PV-DE2H1PW
Equipped with a lubricant oil pump type screw and driven by a three-phase
electric engine, VEM Motors GmbH manufactured by, and 0.75kW - 440v
- 1,17a - 60hz.
A battery of cylindrical type and 20 liters.
System Dynamic Positioning:
The thrusters above are linked to dynamic positioning system (class II)
designed and supplied by Kongsberg Maritime AS, K-POS-22 Duplex
dynamic positioning system for intermediate three processors.
As of reference provides:
DGPS:
A differential global positioning system DGPS designed and provided by
Kongsberg Maritime AS, DPS-232 type, namely:
GPS-GLONASS L 1/L 2-antenna.
IALA beacon antenna type ComRod-AR-10MA-N.
Spot beam antenna type Fugro RTCM.
UHF antenna CXL-70-3LW-h type.
The demodulator Inmarsat's SeaStar-3610-LR type.
A differential global positioning system DGPS designed and provided by
Kongsberg Maritime AS, DPS-132 type, namely:
GPS-1 L/2-L antenna.
IALA beacon antenna type ComRod-AR-10MA-N.
Spot beam antenna type Fugro RTCM.
UHF antenna CXL-70-3LW-h type.
The demodulator Inmarsat's SeaStar-3610LR type.
Hydro-Acoustic:
Two hydro-acoustic type high precision acoustic positioning systems
designed and supplied by Kongsberg Maritime AS, HiPap-501 model, the
type SSBL HiPap dual functionality.
Transponders:
Five manufactured by transponders Kongsberg Maritime AS, the type
cNode 34-30V Maxi-R.

A manufactured by float Kongsberg Maritime AS, the type cNode Maxi X4.
GPS:
Two GPS secondary back - up global positioning system designed and
supplied by Saab Transponder Tech AB, R-4 model.
Laser Based:
A type of laser based reference system designed by Kongsberg Maritime
AS and supplied by Guidance Navigation AS, model CyScan Sensor.
Three sets of eight reflective prisms.
In the control room are complete consoles for control, monitoring and
logging of the operations of dynamic positioning system data logger and
their computers.
In case of emergency, the dynamic positioning system is powered by the
batteries uninterrupted power supply system, namely:
Number Three units
Manufacturer Eaton Ltd.
Model 364 237
3 kva power
230VAC input (13,9a) - 50/60hz
230VAC output (19a) - 3KVA-2,7kw)
According to the specifications developed by the shipyard Merwede
Offshore & Marine IHC- BV the dynamic positioning system can operate
under the following conditions:
Wind 15 meters/seconds (10 minutes)
Current in the surface 9 meters/second
Wave height (Hs) 4.50 meters
(Tm) 10 seconds
The vessel 'Sapura Onyx "also has the following auxiliary machinery and
equipment installed in the engine rooms.
Generators:
For power generation squares were installed in the two groups of six
machines diesel generators, and a compartment located on the port side of
the deck # 4 (4 th deck) a Diesel group emergency generator, namely:
Diesel generators main groups:
Six groups Diesel generators installed on both machines courts:
Manufacturer Wartsila Netherlands BV
Model 8L-32
Type Four times
Eight-cylinder in-line 320 x 400 mm
Power 3,840 kw

Speed 720 rpm


Turbine:
Manufacturer Napier Turbochargers Ltd
Napier-307 Model
Speed 29,500 rpm
Temperature 650 C
Driving a three-phase generator type:
Manufacturer Hyundai Heavy Industries Co. Ltd.
Model HSJ-7-805-10P
Speed 720 rpm
4.100kva power - 6.600v - 358,7a - 60hz
Each generator has projetato cooling system and supplied by Denco Co.
Ltd, namely:
Manufacturer Denco Co. Ltd.
Model 3-RAH-093
Type Air-water
Thermal capacity of 120 kw
Flow rate 19.80 m3/hour
Pressure 0.5 mPa
Generator sets above are linked to the automatic management of power
system power management system designed and supplied by IHC Drives
& Automation BV
Group Diesel Generator Emergency:
An emergency diesel generator installed in a main deck compartment
located in the port, namely:
Manufacturer Mitsubishi Heavy Industries Co. Ltd.
Model S-4-16R-MPTAW
Sixteen-cylinder V- 170 x 180 mm
Power 1,690 kw
Revs 1,800 rpm
Driving a three-phase generator type:
Manufacturer Leroy Somer SA
Model-LSAM 49.1 M75-6S-4Revs 1,800 rpm
800KVA power - 640kw - 440v - 1.050a - 60hz
In the compartment above the following main equipment was found.
A transformer:
Manufacturer TRAF BV
Model 322174
Type Three Phase

Power 100 kva


Voltage 418/440/461v (131/125a) - 230v (251a)
An Air Compressor:
A skid containing a starting air compressor emergency generator
emergency starting air compressor, namely:
Manufacturer Sperre Industri AS
HL-2-90 model
Type Two stages
Flow rate 34 m 3/hour
Pressure 30 bar
Driven by the Diesel engine type.
Manufacturer Lombardini
9LD-625-2 model
Revs 3,000 rpm
Power 15 hp
An Air Pot Pill:
A compressed air vessel emergency starting air vessel:
Manufacturer Sperre AS SVEIS
Vertical Type
Dimensions 650 x 1540 mm
Volume 500 liters
Pressure 30 bar
Diesel oil tank:
A tank with a capacity of 11.50 m3 of diesel oil.
Cooling system:
A cooling system Diesel group emergency generator designed and
supplied by Covrad Heat Transfer Ltd, namely:
Four fans of centrifugal type and Electric engine powered by the threephase type:
Manufacturer Weg Electric Equipment SA
Model 160-M-04
Revs 1,465 rpm
11kw power - 440v - 21st - 50hz
Transformers:
Several voltage transformers with the following characteristics:
Number Three units
Three azimuth thrusters Service
Manufacturer GBE SpA
Reference TS-3A07
Type Three Phase

Power 3,600 kva


6.600v voltage (314,92a) - 735v (1.413,92a)
Quantity Two units
Service Two drivers of retractable type
Manufacturer GBE SpA
Reference 3R07 TSType Three Phase
Power 3,000 kva
6.600v voltage (262,43a) - 735v (1.178,27a)
Quantity Two units
Service Two drivers of cross-sectional
Manufacturer GBE SpA
Reference 3R07 TSType Three Phase
Power 2,700 kva
6.600v voltage (236,19a) - 735v (1.060,44a)
Quantity Two units
Service Release System
Manufacturer GBE SpA
Reference TS-3H07
Type Three Phase
Power 1,600 + 670 kva
6.600v voltage (198,57a) - 508/508/454,5v
(909.21/909.21/851,1a)

Quantity Two units


Service Crane starboard
Manufacturer GBE SpA
Reference 3R07 TSType Three Phase
Power 2,000 kva
6.600v voltage (174,95a) - 690v (1.673,48a)
Four amount units
Service distribution systems
Manufacturer GBE SpA
Reference 3R07 TSType Three Phase
Power 1,700 kva
6.600v voltage (148,71a) - 440v (2.230,67a)
Four amount units
Office lighting systems

Manufacturer TRAF BV
Reference 322173
Type Three Phase
Power 150 kva
Voltage 420/459v (197/189a) - 230v (377a)
A quantity unit
Emergency Services Systems
Manufacturer TRAF BV
Model 322174
Type Three Phase
Power 100 kva
Voltage 418/440/461v (131/125a) - 230v (251a)
Quantity Two units
Service Deck fittings
Manufacturer TRAF BV
Reference 322175
Type Three Phase
Power 35 kva
Voltage 419/440/460V (45.9/43,9a) - 115v (176a)
Quantity Two units
Service System prmagnetizao
Manufacturer GBE SpA
Reference 3R07 TSType Three Phase
Power 20 kva
6.600v voltage (1,75a) - 735/454v (15.71/25,43a)
Neutral Grounding Resistors:
Number Six units
Service Groups Diesel generator # 1-6
Manufacturer Gino Ese Elektrotechnische Fabrik
AG
Reference MJ-02/13
Model EDA-068-690R-CT-S
690 ohms resistance
Voltage 3.800v - 5,5a (10 seconds)
Switchboards:
Two of projected and high voltage switchboards provided by IMESA SpA
Electrical Engineering, namely:
Location Bombordo and starboard deck # 2
Model-C Miniver

6.600v voltage - 440v


Two switchboards for low voltage and designed supplied by Alewijnse
Marine Rotterdam BV, namely:
Location Bombordo and starboard deck # 3
Voltage 440v - 220v
Boilers:
Two auxiliary boilers oil - fired auxiliary boilers installed on top of the
engine room # 2 with the following key features:
Manufacturer Viessmann Werke GmbH & Co. KG
Model-Vitoplex 100-PV
Capacity 530 kw
Flow rate 23 m 3/hour
Inlet temperature 70 C
outlet 90 C
Burner:
Manufacturer Elco
Model VL-5.95OD
Capacity 510-950 kw
Fuel Diesel
Consumer 43 to 80.1 kg/hour
Air compressors:
Two air compressors for the departure of the Diesel type engines mounted
on two skids, namely:
Compressors:
Manufacturer Sperre Industri AS
HL-2/140 Model
Power 19.2 kw
Revs 1,175 rpm
Flow rate 88 m 3/hour
Pressure 30 bar
Driven by three-phase electric engine.
Manufacturer ABB Motors Oy
Model-200-MLA M3AA
Revs 1,197 rpm
24kw power - 440v - 41,5a - 60hz
Vessels:
Two compressed air vessel:
Manufacturer Sperre Industri AS
Horizontal Type
Dimensions 960 x 2,460 mm

Volume 1350 liters


Pressure 30 bar
Two desiccant air dryers, compressed air dryers, namely:
Manufacturer Tamrotor Marine Compressors AS
Model RD-370
Flow 200 m 3/hour
Pressure 8 bar
Temperature (inlet) 45 C
Driven by three-phase electric engine of 2kw - 440v - 9,7a - 60hz.
Two air compressors general services working air compressors mounted
on two skids, namely:
Compressors:
Manufacturer Tamrotor Marine Compressors AS
Model TMC-150-9.5-EWA
Screw Type
Flow 1,104 m3/hour
Pressure 9.5 bar
Water Cooling
Driven by three-phase electric engine:
Manufacturer Weg Electric Equipment SA
Model 315-S/M-4
Revs 1,785 rpm
151kw power - 440v - 243a - 60hz
Two desiccant air dryers, compressed air dryers, namely:
Manufacturer Tamrotor Marine Compressors AS
Model RD-750
Flow 1,200 m 3/hour
Pressure 9.5 bar
Temperature (inlet) 45 C
Driven by three-phase electric engine of 3,4kw - 440v - 9th - 60hz.
Vessels:
Two compressed air vessel:
Manufacturer GAV Group Oy
Vertical Type
Volume 1720 liters
Pressure 9.5 bar
Air pots Tablet:
Two compressed air vessels to the air system of general services working
air system:
Manufacturer Romer GmbH

Vertical Type
dimensions 1,200 x 2,160 mm
Volume 2000 liters
Pressure 11 bar
Two compressed-air tanks for the air control system of air control system:
Manufacturer Romer GmbH
Vertical Type
Dimensions 850 x 2110 mm
Volume 1000 liters
Pressure 11 bar
Pumps:
Lubricating Oil Pumps:
Each diesel generator set has two skids containing the pre-lubrication
systems main engines pre lube oil systems, namely:
Manufacturer Dae Dong Entec.Co. Ltd.
Model 3-RAH-093
Flow 2 liters/minute
Pressure 3 bar
Each skid features:
Two bombs screw type, and driven by a three-phase electric engine:
Manufacturer Hyundai Heavy Industries Co. Ltd.
Revs 1,735 rpm
0.75kW power - 440v - 1,7a - 60hz
A lubricating oil cooler Lube oil cooler:
Manufacturer Gea Wit GmbH
GBS Model 220H-10Type plates
A lubricating oil filter lube oil filter:
Manufacturer INTERNORMEN Technology Ltd.
Model DU-63.25VG
Type Double
Element 311 571
Two lubricating oil transfer pumps groups Diesel generators main engines
lube oil transfer pumps:
Manufacturer Allweiler GmbH
Model TRE-70R46U18.1-V-W202
Screw Type
Flow rate 4.70 m3/hour
Pressure 3 bar
Driven by three-phase electric engine:

Manufacturer Hoyer Motors AS


Revs 1,730 rpm
2.2kW power - 440v - 4,37a - 60hz
Two lubricating oil transfer pumps of the tabs lube oil separators transfer
pumps:
Manufacturer Kral GmbH
Model KF-005 513-7ABA
Screw Type
Flow 19.50 liters/minute
Pressure 3 bar
Driven by three-phase electric engine:
Manufacturer AC Motoren GmbH
FCA Model 71B-2Revs 3,285 rpm
0,66kw power - 440v - 0,92a - 60hz
A lubricating oil transfer pump of the four thrusters fore forward thrusters
lube oil transfer pump:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar
Driven by the pnumtico type system.
A lubricating oil transfer pump of the three reverse thrusters aft thrusters
lube oil transfer pump:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar
Driven by the pnumtico type system.
Diesel oil pumps:
Two transfer pumps oil transfer pumps Diesel MgO:
Manufacturer Allweiler GmbH
Model SNF-210-ER40E8.9-W6I-TEN
Screw Type
Flow rate 23.50 m3/hour
Pressure 3 bar
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS

HMC2-160-I-2 model
Revs 3,520 rpm
11,4kw power - 440v - 18,8a - 60hz
A set with two transfer pumps oil Diesel to supply MgO boiler pumps for
boilers:
Manufacturer Allweiler GmbH
Model AFI-110R28G-19US-W198
Screw Type
Flow 3.20 m 3/hour
Pressure 2 bar
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
Revs 1,100 rpm
0,26kw power - 440v - 0,55a - 60hz
A feed pump of Diesel oil separator MgO separator feed pump:
Manufacturer Allweiler GmbH
Model AFI-10R56G-19US-W198
Screw Type
Flow 1.90 m 3/hour
Pressure 3 bar
Driven by a three-phase electric engine:
Manufacturer AC Motoren GmbH
Model PCA-80B-2HE
Revs 3,440 rpm
1,32kw power - 440v - 2,51a - 60hz
Two diesel oil service pumps mgo service pumps:
Manufacturer Allweiler GmbH
Model AFI-10R56G-19th-W198
Screw Type
Flow 31.80 liters/minute
Pressure 3 bar
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
Revs 3,420 rpm
1,4kw power - 440v - 2,24a - 60hz
Pumps Saltwater:
Four cooling pumps salt water main cooling sea water pumps:
Manufacturer Allweiler GmbH
Model MA-200-250-41U3.19D S-W133-65/550
Type Centrifuge

Impeller 250 mm
Flow 850 m 3/hr (12 m)
Driven by three-phase electric engine:
Manufacturer ABB Motors Oy
Model M3AA-250-SMA-4
Revs 1,778 rpm
63kW power - 440v - 102a - 60hz
Two pumps ballast water and bilge & ballast sewage pumps:
Manufacturer Allweiler GmbH
Model MA-150-250-41U3.19D S-W133-60/450
Type Centrifuge
Impeller 244 mm
Flow 135.10 m3/h (28 m)
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
HMC2-225 Model S-4
Revs 1,770 rpm
38,4kw power - 440v - 62nd - 60hz
System Ballast Water Treatment:
Treatment system d 'ballast water ballast water treatment system designed
and supplied by Alfa Laval AB Tomb, namely:
PureBallast-type 3.0-Flow-500.
Capacity 500 m 3/hour
The treatment system d 'ballast water title compound was mounted on a
skid and have the following key equipment:
Four circulation pumps manufactured by Air Torque SpA:
AL-79.451UDA model
Torque 479 Nm
Pressure 8 bar
Two circulation pumps manufactured by Air Torque SpA:
Model AL-79.201US 12APressure 8 bar
A separator filter coarse filter manufactured by Boll & Kirch Filterbau
GmbH:
Model 6.18.2-300
Vertical Type
Volume 300 dm 3
Temperature 60 C
Element 40 uM
Two sets of membranes manufactured by Leedolms Maskinteknik AB

Module manufactured by CIP SWL Therm AB, containing a plastic tank.


The skid above has too many lines, valves, actuators and actuation devices.
Three main pumps fire fighting main fire fighting water pumps:
Manufacturer Allweiler GmbH
Model NAM-F65-250-02U-3.1d-V5-S-W133
Type Centrifuge
Impeller 237 mm
Revs 3,500 rpm
Flow rate 90 m 3/hour (110 m)
Driven by three-phase electric engine.
Manufacturer Hoyer Motors AS
HMC2-250-M-2 model
Revs 3,550 rpm
57kw power - 440v - 89a - 60hz
Note:
One of the three pumps fire fighting above was installed in the winch
room of port.
A bomb fixed system type fire fighting fog water mist fire fighting system
feed water pump:
Manufacturer Lowara SpA
Type Centrifuge
Flow 72 m 3/hour (61.50 m)
Driven by three-phase electric engine:
Model PLM-160B5-3185
Revs 3,550 rpm
18kw power - 440v - 29,6a - 60hz
A skid containing a system of fire fighting and fire deck wash fighting &
deck wash system, namely:
Supplier Hatenboer Water BV
Reference 460800
Flow rate 2 m 3/hour
Pressure 11 bar
The skid abovementioned features:
A pump manufactured by water Speck Pumpen GmbH with the following
characteristics:
SK-2005LL13-4002 model
Type Centrifuge
Flow 2 m 3/hour (100 m)
Driven by a three-phase electric engine:
Model 100LA m2SIE-4-

Revs 1,728 rpm


2.5kW power - 440v - 5,1a - 60hz
A hydrophore tank tank supplied by Hatenboer Water BV with the
following characteristics:
Manufacturer Speck Pumpen BV
Model DWB
Vertical Type
Dimensions 600 x 1760 mm
Volume 500 liters
Pressure 11 bar
A sewage pump compartments of the three reverse thrusters aft thrusters
rooms direct bilge pumps:
Manufacturer Allweiller GmbH
Nism-80-250 model/01U3.1D-48/350-W3
Type Centrifuge
Flow 134 m 3/minute (29.50 m)
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
Model HMC-180-L-4
Revs 1,750 rpm
25,6kw power - 440v - 42a - 60hz
Pumps Freshwater:
Six cooling water pumps cylinder fresh auxiliary cooling water pumps:
Manufacturer Allweiler GmbH
Model MA-80-315-41U3.19D S-W133-55/400
Type Centrifuge
Impeller 288 mm
Flow 200.50 m3/h (35 m)
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
HMC2-200 Model L-4
Revs 1,780 rpm
31,1kw power - 440v - 51st - 60hz
Two circulation pumps water from the air conditioning system chilled
water circulating pumps:
Manufacturer Allweiler AG
Model NB-080-160-U3
Type Centrifuge
Flow 220 m 3/hour (30 m)
Driven by three-phase electric engine:

Manufacturer Hoyer Motors AS


Model 180L-2-Y2E
Revs 3,440 rpm
34,9kw power - 440v - 55,9a - 60hz
A skid containing feed unit d'hydrophore & freshwater fresh water
sterilizer unit, namely:
Supplier Hatenboer Water BV
Reference 481078
2x10 Flow m3/hour
The skid abovementioned features:
Two pumps manufactured by water Speck Pumpen GmbH with the
following characteristics:
SK-4002LA13-40001 model
Type Centrifuge
Flow rate 14.50 m3/hour (90 m)
Driven by three-phase electric engine:
M2SIEK-Model 132-S-4
Revs 1,752 rpm
6,3kw power - 440v - 13th - 60hz
A vase of water hydrophore tank manufactured by AS Oso with the
following characteristics:
Reference 17 HR
Vertical Type
Dimensions 750 x 2,275 mm
Volume 1000 liters
Pressure 10 bar
A cooler d'fresh water water cooler manufactured by Tranter International
AB with the following characteristics:
Model DRM-009-P
Type plates
Volume (side 1) 1.98 liters
(Side 2) 2.20 liters
Capacity 6 m 3/hour
Two filters of the type additive fine activated carbon filters manufactured
by DHF BV with the following characteristics:
Model 610540AA-25B1-AEE1
Vertical Type
Volume 38.50 liters
Two pots d'UV water treatment fresh water Demitec-UV desinfection
manufacture of chambers with the following characteristics:

Model BM-1.75L2-McUs1
Type Ultra-violet
Flow rate 6 m 3/hour
Pressure 6 bar
A skid containing circulation unit d'hot water hot water circulating system,
namely:
Supplier Hatenboer Water BV
Reference 460800
The skid abovementioned features:
Two pumps hot water Grundfos GmbH manufacture with the following
characteristics:
Model CRN-1-2A-IGF-GE-HQQE
Type Centrifuge
Flow 2.20 m 3/hour (16.20 m)
Driven by three-phase electric engine:
Revs 3,410 rpm
0,87kw power - 440v - 60hz
Two hot water heaters water calorifiers manufactured by Oso Hotwater AB
having the following characteristics:
Reference 481078
RA-17/E-1000 Model
Vertical Type
Volume 900 liters
Pressure 9 bar
Temperature 80 C
Resistances:
Type Three Phase
30kw power - 440v - 60hz
Pressurizer water:
A pressurizer d'PNEUMATEX-Aquapresso Srl manufactured by water
with the following characteristics:
AUF-model 200.10
Vertical Type
Volume 200 liters
Pressure 10 bar
Hydraulic Oil pumps:
Two hydraulic oil transfer pumps of the forward propulsion thrusters
hydraulic units oil transfer pumps:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544

Type Membrane
5 Flow m3/hour
Pressure 3 bar
Driven by pneumatic system.
A skid containing hydraulic oil transfer system of reverse thrusters
thrusters units hydraulic oil transfer pumps with the following features and
components:
Manufacturer CCJensen AS
Reference PTU2-27x27-PV-DE-2H1PW
A pump screw, PV4-14-4 model, and driven by a three-phase electric
engine, namely:
Manufacturer Comes Motors GmbH
Revs 1,680 rpm
0,21kw power - 440v - 0,57a - 60hz
A vertical type accumulator.
A filter of the vertical type.
A hydraulic oil transfer pump of the launch system equipment pipe lines
laying system hydraulic oil transfer pump:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar
Actuated by pneumatic system.
Coolers Diesel oil:
Six Diesel oil coolers of the main engines Diesel engine oil coolers:
Supplier Wartsila Netherlands BV
Casco-type tubes
Thermal power 27 kw
Water coolers:
Six water coolers (low-high temperature) main main low - high
temperature fresh water coolers:
Manufacturer SPX Flow Technology Denmark AB
Model A-055
Type plates
Thermal capacity 2,637 kw
Surface cooling 36,90 m 2
Volume (side 1) 60.6 liters
(Side 2) 60.6 liters
Pressure 5 bar

Two coolers of water (low-high temperature) reserves stand - by low - high


temperature fresh water coolers:
Manufacturer SPX Flow Technology Denmark AB
Model A-055
Type plates
Thermal capacity 2,640 kw
Surface cooling 86,90 m 2
Volume (side 1) 60.6 liters
(Side 2) 60.6 liters
Pressure 5 bar
Four water coolers auxiliary equipment fresh water central coolers for
auxiliary equipments:
Manufacturer SPX Flow Technology Denmark AB
Model J-060
Type plates
Thermal capacity 2,452 kw
Cooling area 51.40 m 2
Volume (side 1) 119.8 liters
(Side 2) 117.8 liters
Pressure 5 bar
Water heaters:
Six pre-heaters d'fresh water from fresh water preheat engines units of
main engines:
Manufacturer Elektro Warme GmbH Muchen
Model WR-4624
Electric type
Thermal capacity 45 kw
Voltage 3-PE-440/460V
Volume 46 liters
Pressure 10 bar
Temperature (maximum) 95 C
Each preheater comprises the title of the respective pump Grundfos GmbH
manufactured by water, namely:
Model TP-40-160-2A-FA-AUUE
Type Centrifuge
Flow rate 13.60 m3/hour (10.60 m)
Driven by a three-phase electric engine:
Revs 3,640 rpm
1,42kw power - 440v - 2,55a - 60hz
Separators Lube Oil and Diesel Oil:

Six lubricating oil separators:


Manufacturer Gea Westfalia Separator Group GmbH
Model OSE-5-91-037/5
Speed 12,000 rpm
Density (net) 1,000 kg/m 3
(Sediment) 1400 kg/m 3
Driven by three-phase electric engine:
Manufacturer Weg Electric Equipment SA
Model 112-M-02
Revs 3,510 rpm
Power 4kw - 460V - 6,78a - 60hz
Two Diesel oil separators:
Manufacturer Gea Westfalia Separator Group GmbH
Model OSE-10-91-067/6
Speed 12,000 rpm
Density (net) 1,000 kg/m 3
(Sediment) 1400 kg/m 3
Driven by three-phase electric engine:
Manufacturer Weg Electric Equipment SA
Model 112-M-02
Revs 3,500 rpm
Power 5,5kW - 460V - 9,07a - 60hz
Each tab above-mentioned features of the respective heater electric type
with the following characteristics:
Manufacturer Elektro Warme Munchen GmbH
4624-V model
Vertical Type
Thermal capacity 24 kw
Temperature 100 C
Volume 46.5 liters
Voltage 3/PE-440-460v
Note:
The separators and heaters above room separators were installed in the
engine rooms # 1 and 2.
A dirty waste oil pump oil pump:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar

Driven by the air system.


A waste transfer pump oil sludge oil transfer pump:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar
Driven by the air system.
Two dirty dirty bilge pumps sewage pumps installed in engine rooms # 1
and 2:
Manufacturer Wilden Pumps Inc.
Model XPX2/AAAAA-BNS/BNABN0721RR8544
Type Membrane
5 Flow m3/hour
Pressure 3 bar
Driven by the air system.
Reverse Osmosis System:
System reverse osmosis reverse osmosis package designed and provided
by Hatenboer Water BV, as follows:
Capacity (2) x 40 m 3/day
Pressure 65 bar
Inflowing 5.80 m 3/hour
The reverse osmosis system was mounted on three skids and has the
following main equipment:
A skid:
Containing circulation pumps manufactured by Air Torque SpA:
Torque 479 Nm
Pressure 8 bar
Containing circulation pumps manufactured by Air Torque SpA:
Model AL-79.201US 12APressure 8 bar
A separator filter coarse filter manufactured by Hydac Process Technology
GmbH:
Model RF-50-10-25SHD
Vertical Type
Volume 160 dm 3
Pressure 0.6 mPa
Temperature 55 C
Element 50 micron

Two sets of membranes manufactured by Wallenius Water AB, model


9002698-81.
Module manufactured by CIP SWL Therm AB, reference 9002547-81,
containing a plastic tank.
The skid above has too many lines, valves, actuators and actuation devices.
A skid of RO desalination system system:
2x40 Capacity m 3/day
Pressure 65 bar
Two water pump high pressure water pumps manufactured by Cat Pumps
International BV with the following characteristics:
Model 3541
Speed 385 rpm
Flow 86 liters/minute
Pressure 65 bar
Driven by three-phase electric engine:
Manufacturer Weg Electric Equipment SA
Model 160-L-06
Revs 1,175 rpm
11kw power - 440v - 19,4a - 60hz
Two feed pump pumps the feed backwash Allweiler GmbH manufacture
with the following characteristics:
Model NB-25-160-01/147U3.10-W133-24/200
Type Centrifuge
Impeller 147 mm
Flow rate 3.90 m3/minute (40 m)
Driven by three-phase electric engine:
Revs 3,420 rpm
2,6kw power - 440v - 4,6a - 60hz
Two dosage pumps anti - scalant dosing pumps manufactured by Pro
Minent Verder BV with the following characteristics:
Model BT-4B-1000PPT-20BRUA-10000
Flow 0.74 liters/hour
Pressure 10 bar
Two filters multi media filters manufactured by Hatenboer Water BV with
the following characteristics:
Model HW-MMF-610A-S
Vertical Type
Diameter 610 mm
Flow rate 5.20 m3/hour
Pressure 6 bar

Twelve of the vertical type filters, namely:


Six amounts of 5 microns
Six 10 microns
Flow 3500 liters/hour
Two tanks made of plastic, with a capacity of 20 liters of anti - scalant type
HDC-ASI-ECO2.
A manufactured by tank CIP tank Aricon Kunstoffwerk GmbH with the
following characteristics:
Material Plastic
Vertical Type
Volume 200 liters
Four manufactured by membranes Demitec AS-8040 SW-SWC-4 model.
The skid above has too many lines, valves, actuators and actuation devices.
A skid final treatment system treatment post RO system:
Capacity 80 m3/day
Pressure 65 bar
A dosing pump metering pump manufactured by Pro Minent Verder BV
with the following characteristics:
Model BT-4B-1601NPB-90BSUA100000
Flow 0.59 liters/hour
Pressure 10 bar
A filter neutralization - mineralizing filter manufactured by Pentair Water
Inc. having the following characteristics:
Model C-2160-F7
Vertical Type
Dimensions 552mm x 2,03m
Volume 310 liters
Flow 75 m 3/hour
Pressure 6 bar
Unit water treatment desinfection dosing unit of the HDU-25-1601-20C
type.
A tank made of plastic with a capacity of 20 liters of Hadex.
A filter demiralising manufactured by filter Pentair Water Inc. having the
following characteristics:
Model 12X48
Vertical Type
Volume 256 liters
Flow 1250 liters/hour
Pressure 6 bar

Equipped with Pro-Minent Ltd manufactured by meter, digital type


DULCOMETER.
Air Conditioning systems:
The accommodation is served by two major air-conditioning main chiller
systems water units designed and supplied by Heinen en Hopman BV,
namely:
Reference MARS-364.01.0001/2
Fluid R-134A
Capacity 670 kw
Water flow 110 m 3/hour
Pressure drop 0.66 bar
Temperature 38 C
Each air-conditioned unit has the following main equipment.
Two compressors:
Manufacturer Hanbell Precise Machinery Co. Ltd.
Model RC-2-510A
Type Screw Semi Hermetic Screw
Power 98 kw
Flow 611 m3/hour
2,2-2,6-3,0-3,5 factor Vi
Driven by three-phase electric engine of 110kw - 440v - 250a - 60hz.
Two capacitors
Manufacturer Provides Metalmeccanica Srl.
Model CB-2721076-2P
Casco-type tubes
Volume (hull side) 67 liters
(Side tubes) 44 liters
2x54 Flow m3/hour
Pressure drop 0.37 bar
Inlet temperature 38.0 C
45.7 C output
Two evaporators:
Manufacturer Provides Metalmeccanica Srl.
40271111 Model-C-3
Casco-type tubes
Volume (hull side) 251 liters
(Side tubes) 40 liters
Flow 110 m3/hour
Pressure drop 0.66 bar
Inlet temperature 12 C

output 6 C
The two air conditioning systems above have two boilers and four water
pumps, namely:
Two hot water boilers boilers installed in the engine room # 2 (deck # 3)
with the following characteristics:
Manufacturer Viessmann Werke GmbH & Co. KG
Model-Vitoplex 100-PV
Capacity 530 kw
Flow rate 23 m 3/hour
Inlet temperature 70 C
outlet 90 C
Burner:
Manufacturer Elco
Model VL-5.95OD
Capacity 510-950 kw
Fuel Diesel
Consumer 43 to 80.1 kg/hour
Two circulating water pumps chilled fresh water circulating pumps
installed in engine rooms # 1 and 2 (deck # 2) with the following
characteristics:
Manufacturer Johnson Pump Industry BV
Model CLB-100A-250
Flow 220 m3/hour
Pressure 3 bar
Driven by three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-180L-04A5
Revs 1,765 rpm
25,3kw power - 440v - 41,5a - 60hz
Two circulation pumps central hot water heating circulating fresh water
pumps installed in the engine room # 2 (deck # 3) with the following
characteristics:
Manufacturer SPX Flow Industry Assembly BV
Model CLB-80A-250-G1MG-12
Impeller 231 mm
Flow rate 46 m 3/hour
Pressure 3 bar
Driven by three-phase electric engine:
Manufacturer Rotor NV
5RN-Model 160-M-04

Revs 1,455 rpm


11kw power - 440v - 22a - 60hz
The two air conditioning systems above have five distribution units of
central air conditioning air handling units designed and provided by
Heinen en Hopman BV, namely:
An AC-01 unit:
Located Deck # 10
Manufacturer Heinen en Hopman BV
MARS-361.01.0001 reference
Serving Footbridge and reception- lounge
Thermal capacity 247 kw
Cooler:
Type Plate - fin
Water flow 9.10 kg/second
Pressure 28 kPa
6 Temperature 12 C
Fan:
RZR-15-450 model
Flow 20 679 m 3/hour
Pressure 2239 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,8a - 60hz
An AC-02 unit:
Located Deck # 8
Manufacturer Heinen en Hopman BV
MARS-361.01.0002 reference
Serving Deck # 6 - # 7 - # 8
Thermal capacity 345 kw
Cooler:
Type Plate - fin
Water flow rate 13.5 kg/second
Pressure 30 kPa
6 Temperature 12 C
Fan:
RZR-15-560 model
Flow 18 891 m 3/hour
Pressure 2552 Pa

Driven by a three-phase electric engine:


Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,9a - 60hz
An AC-03 unit:
Located Deck # 5
Manufacturer Heinen en Hopman BV
MARS-361.01.0003 reference
Serving Deck # 4 - # 5
Thermal capacity 381 kw
Cooler:
Type Plate - fin
Water flow rate 12.6 kg/second
Pressure 38 kPa
6 Temperature 12 C
Fan:
Flow 16 630 m 3/hour
Pressure 2380 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
180M-4 model
Revs 1,760 rpm
21,3kw power - 440v - 35,9a - 60hz
An AC-04 unit:
Located Deck # 5
Manufacturer Heinen en Hopman BV
MARS-361.01.0004 reference
Serving Kitchen (deck # 4)
Thermal capacity 131 kw
Cooler:
Type Plate - fin
Water flow 5.10 kg/second
Pressure 45 kPa
6 Temperature 12 C
Fan:
RZR-15-280 model
Flow 5,155 m 3/hour
Pressure 1745 Pa
Driven by a three-phase electric engine:

Manufacturer Weg Electric Equipment SA


112M-4 model
Revs 1,730 rpm
4,6kw power - 440v - 8,48a - 60hz
A unit (CA-25):
Located Deck # 4
Manufacturer Heinen en Hopman BV
MARS-361.01.000 reference
Magazine serving the stairs
Thermal capacity 18 kw
Cooler:
Type Plate - fin
Water flow 0.70 kg/second
Pressure 30 kPa
6 Temperature 12 C
Fan:
TZR-01-225 model
Flow 1,920 m3/hour
Pressure 602 Pa
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
90S-4 model
Revs 1,750 rpm
1,3kw power - 440v - 2,69a - 60hz
Seventeen independent air conditioning units designed and provided
Heinen en Hopman BV, namely:
A unit of switchboards room room # 1 starboard (AC-06):
Located Deck # 3
Manufacturer Heinen en Hopman BV
MARS-361.01.0007 reference
Thermal capacity 107 kw
Cooler:
Type Plate - fin
Water flow 4.30 kg/second
Pressure 40 kPa
6 Temperature 12 C
Fans:
GPEB-1-00-050-16-0 model
Flow 13,500 m 3/hour
Pressure 1392 Pa

Driven by three-phase electric engine:


Manufacturer ABB Oy Motors
Model M3AA 160MLA-2Revs 3,519 rpm
15,6kw power - 440v - 23,7a - 60hz
A room unit switchboards room # 2 of port (AC-07):
Located Deck # 3
Manufacturer Heinen en Hopman BV
MARS-361.01.0008 reference
Thermal capacity 107 kw
Cooler:
Type Plate - fin
Water flow 4.30 kg/second
Pressure 40 kPa
6 Temperature 12 C
Fans:
GPEB-1-00-050-16-0 model
Flow 13,500 m 3/hour
Pressure 1392 Pa
Driven by three-phase electric engine:
Manufacturer ABB Oy Motors
Model M3AA 160MLA-2Revs 3,519 rpm
15,6kw power - 440v - 23,7a - 60hz
A unit of electrical workshop of ROVs (AC-08):
MARS-361.01.0009 reference
Manufacturer ANA Marine Ltd.
VK-24
Fluid R-404A
Thermal capacity 7.2 kw
Air flow 1,050 m 3/hour
Capacitor plates
Water flow 1.30 m 3/hour
Pressure drop 0.2 bar
A mechanical workshop of the unity of ROVs (AC-09):
MARS-361.01.0010 reference
Manufacturer ANA Marine Ltd.
VK-24
Fluid R-404A
Thermal capacity 7.2 kw

Air flow 1,050 m 3/hour


Capacitor plates
Water flow 1.30 m 3/hour
Pressure drop 0.2 bar
A control room of the unit of ROVs and PDU room (AC-10):
MARS-361.01.0011 reference
Manufacturer Heinen en Hopman BV
Model CST-10-NDLF
Fluid R-404A
Thermal capacity 30 kw
Air flow 4,500 m 3/hour
Pressure 400 Pa
Water flow 6.90 m 3/hour
Pressure drop 0.5 bar
A unit of the machine shop the engine room (AC-13):
MARS-361.01.0014 reference
Manufacturer Heinen en Hopman BV
Model CST-05-DE6.0LF-4SF
Fluid R-404A
Thermal power 17.5 kw
Air flow 2,550 m 3/hour
Water flow 5.80 m 3/hour
Pressure drop 0.5 bar
One unit of the propellant chamber # 1 (AC-14):
MARS-361.01.0015 reference
Manufacturer Heinen en Hopman BV
Model CST-12-DE12LF-4SF
Fluid R-404A
Thermal capacity 42 kw
Flow 6,120 m 3/hour
Water flow 12.60 m3/hour
Pressure drop 0.65 bar
One unit of the propellant chamber # 2 (AC-15):
MARS-361.01.0016 reference
Manufacturer Heinen en Hopman BV
Model CST-12-DE6LF-4SF
Fluid R-404A
Thermal capacity 42 kw
Flow 6,120 m 3/hour
Water flow 12.60 m3/hour

Pressure drop 0.65 bar


One unit of the propellant chamber # 3 (AC-16):
MARS-361.01.0017 reference
Manufacturer Heinen en Hopman BV
Model CST-12-DE6LF-4SF
Fluid R-404A
Thermal capacity 42 kw
Flow 6,120 m 3/hour
Water flow 12.60 m3/hour
Pressure drop 0.65 bar
One unit of the propellant chamber # 4 (CA-17):
MARS-361.01.0018 reference
Manufacturer Heinen en Hopman BV
Model CST-12-DE6LF-4SF
Fluid R-404A
Thermal capacity 42 kw
Flow 6,120 m 3/hour
Water flow 12.60 m3/hour
Pressure drop 0.65 bar
A unit of electrical workshop and warehouse (AC-18):
MARS-361.01.0019 reference
Manufacturer Heinen en Hopman BV
Model CST-03-PE6RF-4SF
Fluid R-404A
Thermal power 10.5 kw
Air flow 1,530 m 3/hour
Water flow 2.90 m 3/hour
Pressure drop 0.1 bar
A room of the unity of the launch system switchboards (CA-19.1):
MARS-361.01.0020 reference
Manufacturer Heinen en Hopman BV
Model CST-12-DE6LF-4SF
Fluid R-404A
Thermal power 45.9 kw
Air flow 6,120 m 3/hour
Water flow 12.60 m3/hour
Pressure drop 0.53 bar
A room of the unity of the launch system switchboards (CA-19.2):
MARS-361.01.0030 reference
Manufacturer Heinen en Hopman BV

Model CST-12-DE6LF-4SF
Fluid R-404A
Thermal power 45.9 kw
Air flow 6,120 m 3/hour
Water flow 12.60 m3/hour
Pressure drop 0.53 bar
One unit of the propellant chamber # 5 (AC-22):
MARS-361.01.0023 reference
Manufacturer Heinen en Hopman BV
Model CST-05N-DE9.0LF-4SF
Fluid R-404A
Thermal power 17.5 kw
Flow 2,550 m 3/hour
Water flow 5.80 m 3/hour
Pressure drop 0.35 bar
One unit of the propellant chamber # 6 (AC-23):
MARS-361.01.0024 reference
Manufacturer Heinen en Hopman BV
Model CST-05-N-DE9.0LF 4SF
Fluid R-404A
Thermal power 17.5 kw
Flow 2,550 m 3/hour
Water flow 5.80 m 3/hour
Pressure drop 0.35 bar
One unit of the propellant chamber # 7 (AC-24):
MARS-361.01.0025 reference
Manufacturer Heinen en Hopman BV
Model CST-05-N-DE9.0LF 4SF
Fluid R-404A
Thermal power 17.5 kw
Flow 2,550 m 3/hour
Water flow 5.80 m 3/hour
Pressure drop 0.35 bar
A unit's operations control room located on deck # 8 (AC-31):
Manufacturer Heinen en Hopman BV
MARS-361.01.0043 reference
Thermal capacity 18 kw
Cooler:
Type Plate - fin
Water flow 0.70 kg/second

Pressure 40 kPa
6 Temperature 12 C
Fans:
GPEC-4-00-031 model
Flow 2,376 m3/hour
Pressure 400 Pa
Driven by three-phase electric engine:
Manufacturer Ebmpapst
Model R3G310-BA-60-01
Revs 3,250 rpm
1,64kw power - 440v - 2,4a - 60hz
A unit of electrical workshop (AC-32):
MARS-361.01.0044 reference
Manufacturer ANA Marine Ltd.
VK-24
Fluid R-404A
Thermal capacity 7.2 kw
Air flow 1,050 m 3/hour
Capacitor plates
Water flow 1.30 m 3/hour
Pressure drop 0.2 bar
A unit of workshop mechanics ROVs (AC-33):
MARS-361.01.0045 reference
Manufacturer ANA Marine Ltd.
Model VK-12
Fluid R-404A
Thermal capacity 3.5 kw
Air flow 600 m 3/hour
Capacitor plates
Water flow 0.75 m 3/hour
Pressure drop 0.2 bar
A mechanical workshop of the unit of equipment for launch and retrieval
systems lines (AC-34):
MARS-361.01.0046 reference
Manufacturer ANA Marine Ltd.
VK-24
Fluid R-404A
Thermal capacity 7 kW
Air flow 1,050 m 3/hour
Capacitor plates

Water flow rate 1.3 m 3/hour


Pressure drop 0.2 bar
A unit of electrical equipment compartment (AC-35):
MARS-361.01.0047 reference
Manufacturer ANA Marine Ltd.
VK-24
Fluid R-404A
Thermal capacity 9.4 kw
Air flow 2,200 m 3/hour
Capacitor plates
Water flow rate 1.3 m 3/hour
Pressure drop 0.2 bar
Equipped with two external drives.
A warehouse unit located forward of the propellant chamber # 7 (AC-36):
MARS-361.01.0091 reference
Manufacturer ANA Marine Ltd.
Model VK-12
Fluid R-404A
Thermal capacity 3.5 kw
Air flow 600 m 3/hour
Capacitor plates
Water flow 0.75 m 3/hour
Pressure drop 0.2 bar
Refrigerating compressors:
The cold rooms refrigerated chambers of meat and fish have designed
cooling systems and supplied by NR KOELING BV, namely:
Meat camera:
Location starboard Deck # 4
Area 16 m 2
Temperature -23 C
Cooling unit:
Manufacturer Eco Coils & Coolers Ltd.
Model-CTE 68L8-ED
Thermal capacity 3 kw
Fluid R-404A
Fish camera:
Location starboard Deck # 4
Area 20 m 2
Temperature -23 C
Cooling unit:

Manufacturer Eco Coils & Coolers Ltd.


Model-CTE 51L8-ED
Thermal capacity 2.4 kw
Fluid R-404A
Two compressors:
Manufacturer Bitzer Kuhlmaschinenbau GmbH
Model 4NES-14Y-40P
Flow rate 67.90 m3/hour
Pressure 20 bar
Driven by three-phase electric engine:
Supplier Bitzer Kuhlmaschinenbau GmbH
Revs 1,750 rpm
11kw power - 440v - 24th - 60hz
Two capacitors
Supplier Bitzer Kuhlmaschinenbau GmbH
Model K-573H
Horizontal Type
Volume 29.4 to 5.8 litros
Temperature 38-40 C
Pressure 1.1 mwg
Two oil separators:
Manufacturer Henry Technologies Ltd.
Model S-5187-EC
Cartridge Type
DML-166-3/4 element
In addition to the equipment listed above, the vessel 'Sapura Onyx " has
several heat exchangers, pumps fresh and salt water, diesel oil, smaller
lubricating oil, filters, etc.
Workshops and Warehouses:
Mechanical workshops:
A workshop mechanical workshop mechcanical installed in the engine
room # 2:
A vise:
Manufacturer Optimum GmbH
Model D660x2000
A bench drill drill press:
Manufacturer Ibarmia SA
SZ-32 model
Maximum speed 3,600 rpm
Three-phase Electric engine of 1 kw - 440v - 3,2a - 60hz

An emery:
Manufacturer Kef Motor AS
Model PSD-10
Dimensions 300x25mm - 32mm
Revs 3,300 rpm
Electric engine 2.200w - 440v - 4,20a - 60hz
A horizontal cutting machine hack sawing machine:
Manufacturer Kasto Maschinembau GmbH
KASTOhbs-2 model
Three-phase Electric engine of 1,3kw - 440v - 10th - 60hz
A freza multifrees machine machine:
Manufacturer Optimum GmbH
Model MF-4 Vario
Diameter 20 mm
Three-phase Electric engine of 3,7kw - 440v - eighth - 60hz
A welding machine:
Manufacturer ESAB Welding Equipment AB
Origo-Arc Model 410cPower 20a/20v - 400a/36v
A machine shop installed the starboard deck # 4 (4 th deck):
A bench drill drill press:
Manufacturer Optimum GmbH
Model B-40GSM
Revs 1,450 rpm
Three-phase Electric engine of 1.5kW - 440v - 3,2a - 60hz
An emery:
Manufacturer Kef Motor AS
Model PSD-5
Dimensions 200x38mm - 20mm
Revs 3,300 rpm
1000W Electric engine - 440v - 1,9a - 60hz
A hydraulic press hydraulic press machine:
Manufacturer Profi Press
Model M/HM/C-2V
Capacity 100 tons
Pressure 380 bar
The press referred above has hydraulic unit small, namely:
A hydraulic pump submerged type, driven by a three-phase electric engine
of 2.2kW - 440v - 4,5 - 60hz.
A rectangular type of tank with a capacity of 30 liters of hydraulic oil.

A press:
Manufacturer Fin Power
32MS-22
Capacity 1,000 kN
Pressure 275 bar
Electric engine 4,8kw - 480V - 20th - 60hz
A machine shop installed the starboard deck # 4 (4 th deck) for
maintenance of remote control vehicles.
Workshops Electric:
An electrical workshop installed on the deck # 3 (3 rd deck):
A test panel electric type tests electric panel:
Supplier Alewijnse Marine Rotterdam BV
Capacity 3 x 440Vac - 230Vac (16a)
3 x 230VAC
- 230VAC (2.5a)
230VAC 24VAC (10a)
230VAC 0/30vac (10a)
Two laptops laptops for diagnostics of breakdowns in equipment
manufactured by Getac Ltd, model S-400-B529-E-C3.
An electric garage decks installed to port # 4 (4 th deck) for maintenance
of equipment of the launch and recovery systems lines.
An electrical workshop installed the starboard deck # 5 (5 th deck) for
maintenance of remote control vehicles.
An electronic workshop installed on the port side of the deck # 5 (5 th
deck) for maintenance of remote control vehicles.
A welding workshop installed the starboard deck # 4 (4 th deck):
A welding machine:
Manufacturer ESAB Welding Equipment AB
Origo-Arc Model-250
55th power (220v) - 250a (30v)
An emery:
Manufacturer Kef Motor AS
Model 915403100
Dimensions 300x50mm - 32mm
Revs 3,300 rpm
1000W Electric engine - 440v - 1,9a - 60hz
Two cutting machines high speed cut - off machines:
Manufacturer Hitachi Koki Co.Ltd.

CC-14SF Model
Diameter 355 mm
Warehouses:
Various warehouses containing a wide range of spare parts.
10 - Construction:
The construction of the hull of the vessel 'Sapura Onyx "is entirely welded
steel naval having transverse structure and subdivided for eleven
transverse watertight bulkheads in the following main compartments:
Among the ribs # 180-169, the ballast water tank pique bow tank, the
lockers bonds, the master magazine, and paint barn.
Among the ribs # 169-162, magazines propellant # 1.
Among the ribs # 162-151, # propellants of the compartments 2 and 3, and
tanks of potable water port and starboard.
Among the ribs # 151-125, the engine room # 1, # 4 of the thruster
compartment, and tanks of potable water # 3 and # 4 d'industrial water
port and starboard.
Among the ribs # 125-107, the engine room # 2, and ballast water tanks #
5 port and starboard.
Among the ribs # 107-090, the ballast water tanks # 6 port and starboard,
of diesel oil tanks # 6 starboard, the moon pool, the port winch court, and
the cofferdam/pipe duct.
Among the ribs # 090-057, the ballast water tanks # 7 heeling port and
starboard, the empty # 8 port and starboard spaces, and Carousel # 1
basket.
Among the ribs # 057-030, the ballast water tanks # 10 heeling port and
starboard, the voids # 9 port and starboard, and Carousel # 2 basket.
Among the ribs # 030-015, the ballast water tanks # 11 port and starboard,
the oil tanks Diesel 11 port and starboard, and the empty space # 11
central.
Among the ribs # 015-000, magazines thrusters # 5 and 6, the empty space
# 11 Central, and waste oil tank - sludge # 12 central.
Among the ribs # 000 - (-) 010, the propellant magazine # 7, and ballast
water tanks # 13 port and starboard.
Hull Protection System:
Printed cathode current type impressed current anti - fouling system
designed and supplied by Corrosion & Water-Control Maritime BV
The system above has the following main features:
Reference 88718/11523
Voltage:
Primary 230v - 50/60hz

Secondary 12vdc - 2x10a


Type of anodes MMO-Ti - O505
Type of electrodes Zinc
Watertight doors:
Twelve watertight doors watertight sliding doors with site activation
and/or remote designed and supplied by Winel BV, namely:
Type Albatros
Dimensions 900 x 2,100 mm
Drive A hydraulic cylinder 60 kPa
Each port tight above has hydraulic unit small, namely:
A pump submerged type and driven by a three-phase electric engine:
Manufacturer Electramo SA
Y3-80M-2-4VI model
Revs 1,670 rpm
0.75kW power - 440v - 1,8a - 60hz
A manufactured by accumulator Hydac AS with the following
characteristics:
Vertical Type
Volume 20 liters
Pressure 330 bar
One type rectangular tank with capacity of 10 liters of hydraulic fluid.
And the twelve gates were installed tight above, namely:
Rib # 151, thrusters between compartments # 4 and # 2 and 3.
Rib # 125, between the engine rooms # 1 and 2.
Rib # 125, between the engine room # 2 and # 03 319 corridor.
Rib # 107, between the square winch (be) and engine room # 2.
Rib # 090, between the living room and basement of switchboards # 1
(basket # 1).
Rib # 090, between the square winch (be) and hold # 1 (basket # 1).
Rib # 064, between the hallway and the stairs compartment.
Rib # 057, between hallway and corridor.
Rib # 036, between the hallway and basement # 2 (basket # 2).
Rib # 033, between hallway and corridor.
Rib # 015, between the magazine (project) and the propellant # 7 slot.
Rib # 015, between the hallway and the propellant # 6 slot.
Control panels and monitoring of the watertight doors are located on the
bridge and the safety station aft deck # 5 (5 th deck).
Capacities:

According to the loading and stability manual prepared by the IHC


Merwede Offshore & Marine-BV in their tanks can be armanezados the
following amounts of diesel oil, lubricating oil, potable water, and ballast:
Diesel oil tanks:
# 6 starboard tank (between ribs # 107-090) 423.95 m 3
Tank # 11 port (between ribs # 033-015) 740.85 m 3
starboard (between ribs # 033-015) 740.85 m 3
Fuel tank oil leakages (between ribs # 123-119) 13.77 m 3
Mgo tank overflow (between ribs # 114-109) 36.13 m 3
Tank # 3 bb decantation (between ribs # 151-147) 44.02 m 3
Tank # 5 be decantation (between ribs # 110-107) 46.43 m 3
Tank # 3 bb service (between ribs # 151-147) 40,14 m 3
Tank # 5 be service (between ribs # 110-107) 36.11 m 3
Tank emerg generator. (Between ribs # 093-090) 11.35 m 3
Incinerator tank 1.14 m 3
Total 2134.74 m 3
Oil tanks and lubricant Hydraulic:
Tank # 12 bb lube oil Storage 11.11 m 3
Tank # 12 bb hydraulic oil 7.40 storage m3
Lube oil tank storage fwd thrusters 7.91 m 3
Hydraulic oil tank storage fwd thrusters 3.95 m 3
Tank # 3 bb lube oil ren 7.74 m 3
Lube oil tank storage main aft 15.47 m 3
Tank # 3 be lube oil Storage 17.46 m 3
Tank hydraulic oil drain 6.19 m 3
Hydraulic oil tank 6.19 storage m3
Total 83.45 m 3
Freshwater tanks:
Tank # 2 port (between ribs # 162-151) 198.83 m 3
starboard (between ribs # 162-151) 207.32 m 3
Tank # 3 port (between ribs # 151-140) 302.77 m 3
starboard (between ribs # 110-140) 302.77 m 3
Total 1011.71 m 3
Industrial Water Tanks:
Tank # 4 port (between ribs # 140-125) 311.64 m 3
starboard (between ribs # 140-125) 311.64 m 3
Total 623.28 m3
Ballast Water Tanks:
Tank # 1 center (between ribs # 178-169) 327.93 m 3
Tank # 5 port (between ribs # 125-107) 230.48 m 3

starboard sewage (between ribs # 125-107) 230.48 m 3


Tank # 6 (db) port (between ribs # 107-090) 142.75 m 3
(Db) starboard (between ribs # 107-090) 131.57 m 3
Tank # 6 port (between ribs # 107-090) 230.48 m 3
starboard (between ribs # 107-090) 230.48 m 3
Tank # 7 (db) port (between ribs # 090-069) 198.64 m 3
(Db) central (between ribs # 090-069) 216.70 m 3
(Db) starboard (between ribs # 090-069) 198.64 m 3
Tank # 8/9 (db) port (between ribs # 069-049) 198.23 m 3
(Db) central (between ribs # 069-049) 235.77 m 3
(Db) starboard (between ribs # 069-049) 198.23 m 3
Tank # 10 (db) port (between ribs # 049-033) 198.64 m 3
(Db) central (between ribs # 049-033) 212.22 m 3
(Db) starboard (between ribs # 049-033) 157.19 m 3
Tank # 11 (db) port (between ribs # 033-015) 236.14 m 3
(Db) starboard (between ribs # 033-015) 236.14 m 3
Tank # 11 (wt) port (between ribs # 033-015) 207.15 m 3
(Wt) starboard (between ribs # 033-015) 207.15 m 3
Tank # 13 port (between ribs # 010-000) 414.40 m 3
starboard (between ribs # 010-000) 467.68 m 3
Total 5064.01 m 3
Anti-heeling Anti - Heeling:
Tank # 7 bb antiheeling (between ribs # 090-069) 285.09 m 3
be antiheeling (between ribs # 090-069) 285.09 m 3
Tank # 10 bb antiheeling (between ribs # 049-033) 247.33 m 3
be antiheeling (between ribs # 049-033) 247.33 m 3
Total 1064.85 m 3
Empty Void spaces Spaces:
Tank # 1 center (between ribs # 178-169) 72.17 m 3
Tank # 2 The central (between ribs # 169-162) 90.68 m 3
central B (between ribs # 162-160) 6.78 m 3
central C (between ribs # 151-140) 91,92 m 3
D center (between ribs # 140-125) 26.93 m 3
Tank # 3 port (between ribs # 151-147) 21.94 m 3
central (between ribs # 151-140) 231.63 m 3
Tank # 4 central (between ribs # 140-125) 316.23 m 3
Tank # 5 central (between ribs # 125-107) 436.70 m 3
starboard (between ribs # 110-107) 7.74 m 3
Tank # 6 port (between ribs # 107-090) 36.57 m 3
central (between ribs # 107-090) 71.51 m 3

starboard (between ribs # 107-090) 36.57 m 3


Tank # 7 port (between ribs # 090-069) 49.86 m 3
starboard (between ribs # 090-069) 49.86 m 3
Tank # 8 port (between ribs # 069-057) 168.25 m 3
starboard (between ribs # 069-057) 168.25 m 3
Tank # 8 (db) port (between ribs # 069-057) 30.75 m 3
(Db) starboard (between ribs # 069-057) 30.75 m 3
Tank # 9 port (between ribs # 057-049) 137.06 m 3
starboard (between ribs # 057-049) 137.06 m 3
Tank # 9 (db) port (between ribs # 057-049) 28.53 m 3
(Db) starboard (between ribs # 057-049) 28.53 m 3
Tank # 10 port (between ribs # 049-033) 36.11 m 3
starboard (between ribs # 049-033) 36.11 m 3
Tank # 11 central (between ribs # 033-015) 535.49 m 3
Tank # 12 central (between ribs # 015-008) 247.93 m 3
Tank # 14 central (between ribs # 092-090) 15.94 m 3
Tank # 15 port (between ribs # 107-090) 20.46 m 3
starboard (between ribs # 105-090) 18.05 m 3
Total 3186.52 m 3
Waste tanks:
Oil tank/waste (between ribs # 012-009) 43.08 m 3
Dirty oil tank (between ribs # 146-144) 36.11 m 3
Waste tank # 1 (between ribs # 146-144) 8.20 m 3
Waste tank # 2 (between ribs # 119-112) 8.20 m 3
Waste tank o/d (between ribs # 123-119) 13,90 m 3
Tank dirty water (between ribs # 128-123) 40.98 m 3
Tank (db) water drains (between ribs # 131-128) 24.59 m 3
Remote Control Systems Gates and Survey:
The title tanks have remote control valves and valve control systems
remote probing systems, namely:
Remote System Control Valves:
System remote valve control oil hydraulic operated valves control system
designed and supplied by Dancos AS - Emerson Process Management.
Actuators:
Several Dancos AS manufacture of actuators, hydraulic type of single
acting balanced rotary actuators & linear single acting spring cloasing
actuators, and installed in the tanks of ballast systems, sewage, fuel oil
transfer, namely:
Ballast system, KF-250 models and BRCF-1000 single acting balanced
rotary actuators, 135 bar.

Sewage system, KFR-125 model single acting balanced rotary actuators,


135 bar.
Oil transfer system Diesel, KFR-125 model single acting balanced rotary
actuators, 135 bar.
The control panels and monitoring were connected to the VMS vessel
management system.
Remote System Survey:
Remote probing system tank level system designed and supplied by
Dancos AS - Emerson Process Management, (reference 116323).
Sensors:
Several sensors G-10-10-0 type/1P tank level sensors and transmitters of
type MAS-2600 tank level transmitters, manufactured by Dancos AS, and
installed in the ballast tanks of systems, fuel oil, lubricating oil, hydraulic
oil.
System heeling Control:
Heeling control system anti - healing system designed and supplied by
Frank Mohon AS and equipped with two pumps installed in basements # 1
and # 2.
The control panel and monitoring of anti - healing is located on the bridge.
Anti - Healing Pumps:
Manufacturer Frank Mohon AS
Model RBP-300-3ISO-10F-350V27-14
Type Centrifuge
Flow 1,000 m 3/hr (10 m)
Driven by three-phase electric engine:
Manufacturer ABBMotors Oy
Model M3AA 200MLD-2Revs 3,548 rpm
60kw power - 440v - 92nd - 60hz
Hatches:
Four hatches main hatch covers located to port and starboard deck # 4 (4 th
deck) above the holds # 1 and 2 (baskets # 1 and 2), namely:
Rectangular shape
Dimensions 7.80 x 3.20 m
Dungeon # 1 location (between ribs # 080-069)
Dungeon # 2
(between ribs # 047-036)
The hatches above have two hatch coamings of mobile type, and 7.80 x
3.20 x 1.00 m.
Buoys baskets:

Fourteen baskets 40 ft high cube containers to open stowage buoys risers


installed on deck # 4 with the following characteristics:
Manufacturer Zhangjiagang Rixin logistical Tongyun
tic equipment Co. Ltd.
Model RXTC-41-RKD
ISO-standard 1AAA
Dimensions 40 x 8 x 9.5 feet
Hoisted 357 001 numbers hoisted-357014
Moon Pool:
A moon pool located between the caverns # 105 and 092 with the
following key features:
Rectangular shape
Dimensions 10.14 x 7.50 meters
Two doors
Driven by a hydraulic unit designed and supplied by Hydrauliq BV with
the following characteristics:
Located Winch room
HYO-302 Reference
Model HPU-5.5-6.3
Flow 9.40 liters/minute
Pressure 210 bar
Tower:
The launch tower and recovery of flexible and umbilical lines was
designed and supplied by SAS Offshore BV and installed by the shipyard
IHC Merwede Offshore-Marine BV between ribs # 110-90, and has the
following main features:
C-376 model
Material Steel naval soldier
Type Mobile
The frame format
Extreme Dimensions 16.51 x 11.68 x 54.37 m
Maximum height 63.00 m
Operating angle 90 to 80
Static load 550 tons
Cranes:
For the handling of cargo and/or equipment the "Sapura Onyx" features:
Two pedestal cranes slewing cranes installed on the port side and starboard
deck # 5 with the following key features:
Main Crane:

A main crane for connection and disconnection of underwater chores


installed equipment and fittings on the seabed manufactured by Oilwell
Varco Norway AS National
The crane has operating capability in water depths up to 3,000 meters, and
has the following main features:
Location Starboard (between ribs # 066-057)
National Oilwell Varco manufacturer Norway AS
Reference L-2714
Model OC-4475KSCE- (80-250) - (36-14) (23) (20-40)
AHC

Type Electro-hydraulic
Boom length:
Type Main boom
Spear 23.26 meters
Knuckle boom type
Spear 23.75 meters
Capacities (b # 1) 250.00 tons (14.00 meters)
82.00 tons
(36.00 meters)
(B # 2) 20.00 tons (40.00 meters)
Main winch:
Load 250 tons
Drum:
Manufacturer Lebus International GmbH
Type Grooved
dimensions 2,900 x 1,856 mm
Capacity 3,100 m (five layers)
Steel wire:
Flexpack-18-35 Reference
Type Galvanized
Dimensions 96 mm x 3.000 m
Breaking load 7,735 kN
Speed 15.90 m/minute
Powered for twenty-four hydraulic motors and their reducers type:
Hydraulic motors:
Manufacturer Rexroth GmbH
Model AA6VM-215EPW00LE00E/71WVOE4T-2200SC

Type Axial piston


Torque 20,120 Nm

Reducing:
Manufacturer Brevini Riduttori SpA
Model RPR-2255DCE
Planetary type
Reduction factor 1: 501.5
Brake Disc
Auxiliary winch:
Load 82 tons
Drum:
Manufacturer Lebus International GmbH
Type Grooved
Dimensions 1,180 x 1,316 mm
Capacity 750 m (five layers)
Steel wire:
Reference Flexpack-15
Type Galvanized
Dimensions 34 mm x 600 m
Tensile 1,010 kN
Speed 80 m/min
Powered by two engines of hydraulic type and their reducing:
Hydraulic motors:
Manufacturer Parker GmbH
12-150MF-F-S-SV Model 384000-0
Type Axial piston
Reducing:
Manufacturer Zollern GmbH & Co.KG
ZHP-4:29 model
Planetary type
Torque 76,800 Nm
Reduction factor 1: 146.7
Brake Disc
Two winches Tuggers:
Load 10 tons
Steel wire:
Type Galvanized
Dimensions 23 mm x 120 m
Breaking load 398 kN
Speed 75 m/min
Driven by a hydraulic motor type and related reduction:
Hydraulic motor:

Manufacturer Sauer Danfoss GmbH


Model 51C-110RD4N-H4B3-RJN2-NNN022ANNC235

Reducing:
Manufacturer Brevini Riduttori SpA
PWD-3700 model
Planetary type
Torque 37,500 Nm
System Hoisting Luffing:
Main Boom:
Two cylinders of hydraulic type manufactured by Hunger Walter GmbH
Knuckle Boom:
Two cylinders of hydraulic type manufactured by Hunger Walter GmbH
Slewing system Giro:
Reach 360
Rotating speed 0.9 rpm
The rotating system has six motors of the hydraulic type and respective
reducing:
Hydraulic motors:
Manufacturer Rexroth GmbH
Model AA2FM-90/61W
Type Axial piston
Reducing:
Manufacturer Brevini Riduttori SpA
SLS-4003-DC model
Planetary type
Reduction factor 1: 126
Brake Disc
The crane above-mentioned features hydraulic unit with the following
main equipment:
Three Electric engines three-phase type:
Manufacturer ABB Oy Motors
Model M3BP 400LKB-4-IMV3-IM3031
Type Three Phase
Revs 1,789 rpm
880kw power - 690v - 862a - 60hz
Three pumps hydraulic type and respective reduction of the planetary
type:
Manufacturer Rexroth GmbH
Model PLA4-VSG-355HS4-30R-PZB

Revs 1,500 rpm


Volume 355 cm 3
A hydraulic oil circulation pump manufactured by Ing Per Gjerdrum AS
with the following characteristics: a.
Screw Type
Flow 31,20 m 3/min
Pressure 70 bar
Driven by a three-phase electric engine:
Manufacturer ABB Oy Motors
Model M3AA-225SMC-4-IMB35-IM2001
Revs 1,780 rpm
51kw power - 690v - 57,5a - 60hz
Filters:
Four hydraulic oil filters provided by National Oilwell Varco Norway AS
with the following characteristics:
Model 212 524
Vertical Type
Pressure 280 bar
Element 212575
Coolers:
Three hydraulic oil coolers manufactured by Nissen BV equipped with
two fans each having the following characteristics:
Model 213753
Type Centrifugal
Each fan above driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
K21R-Model 132-F-4-HW
Revs 1,750 rpm
8,6kw power - 690v - 9,5a - 60hz
Accumulators:
A skid accumulators containing nine air vessel & Nitrogen acumulators.
A hydraulic system accumulator horizontal type.
Transformers:
Two-phase transformers type of manufactured by GBE SpA with the
following characteristics:
3R07 Model TSPower 2,000 kva
6.600v voltage (174,95a) - 690v (1.673,48a)
The hydraulic system above operates under the following conditions:
Flow (approximate) 5388 liters/minute

Pressure 300 bar


Auxiliary Crane:
A crane auxiliary equipment for handling chores usually with the
following main features.
Location Bombordo (between ribs # 018-015)
Manufacturer TTS Offshore Handling
Equipment AS
Reference 21664
GPOc-model 1250-30-25
Type Electro-hydraulic
Launches:
Type Box boom
Spear 25.00 meters
Capacities:
Main 30 tons (20.00 meters)
20 tons
(25.00 meters)
Auxiliary 10 tons (25.00 meters)
Lifting speeds:
Cabo 71.00 m/minute
Launches luffing 60.00 m/minute
Giro 1.5 rpm
Steel ropes:
Principal:
Type Galvanized
Dimensions 40 mm x 3110 meters
Breaking load 1,470 kN
Assistant:
Type Galvanized
Dimensions 25 mm x 190 meters
Breaking load 572 kN
The crane above has the following main equipment:
Winches:
A main winch powered by three engines of hydraulic type and their
reducing:
Manufacturer Rexroth GmbH
A6VM-Model 355-HD1D-63W1-VZH10-VB
Flow 380 liters/minute
Pressure 350 bar
Reducing:

Manufacturer TTS SpA


T2016A model 2T711-06Reduction factor 16.7
An auxiliary winch powered by a hydraulic motor type and related
reduction:
Manufacturer Rexroth GmbH
Model A6VM-160-HD1D-63W-VAB01000B
Flow 380 liters/minute
Pressure 350 bar
Reducing:
Manufacturer TTS SpA
Model 4.29-1359893
Reduction factor 82.571
Three engines of hydraulic type for driving the crane swivel system,
namely:
Manufacturer Rexroth GmbH
Model A2FM-56/61W-VAB-010
Volume 45 cm3
Pressure 350 bar
Reducing:
Manufacturer TTS SpA
Model 2T709T-3145A04
Planetary type
Reduction factor 145
Two cylinders of the hydraulic type for driving the boom.
Hydraulic unit:
An Electric engine:
Manufacturer Hoyer Motors AS
Y2E2-315L-3-4 Model
Type Three Phase
Revs 1,780 rpm
291kw power - 440v - 453rd - 60hz
A hydraulic pump:
Manufacturer Rexroth GmbH
Model A15VSO210LRDRS-0A0V/10MRVE-21 EU-000-0

Revs 1,800 rpm


Flow 320 liters/minute
A circulation pump:
Manufacturer Parker GmbH

Model PV-046R9K1T1NMLCK-0436
Capacity 46 cm 3/U
Pressure 345 bar
Driven by a three-phase electric engine:
Manufacturer Hoyer Motors AB
HM2-180 Model L-4
Revs 1,760 rpm
34,3kw power - 440v - 59,35a - 60hz
A hydraulic oil cooler radiator type manufactured by Parker GmbH,
namely:
Model M-113-6B-LAC-Z 00-000-0Type Centrifugal
Revs 1,160 rpm
Driven by a three-phase electric engine:
Manufacturer Bevi AB Motors
4AL2n-132M2-6 model
Power 6,6kw - 460V - 12,6a - 60hz
Two Nitrogen accumulators of N2 type piston acumulators:
Manufacturer OLAER AS
Model EH-PC-0100-250-100
Volume 10 liters
Pressure 250 bar
Provisions Crane:
A crane for moving supplies and equipment installed above the Diesel
group compartment emergency generator with the following
characteristics:
Location Bombordo (between ribs # 103-101)
Manufacturer Palfinger Ned-Deck Ltd.
Model 35-18-12 SCT-SType Electro-hydraulic
Spear 12.00 meters
Capacity 1.80 tons (12.00 to 2.45 meters)
Steel wire:
Type Galvanized
Dimensions 14 mm x 60 meters
Lifting speeds:
Cable 30,00 m/min
Luffing throws 60 seconds
Giro 1 rpm
A winch with capacity of 2 tons and powered by a hydraulic motor type.

Two hydraulic motors and their reducers for driving the rotating system.
A hydraulic cylinder for moving the boom.
Hydraulic unit:
A pump submerged type and driven by a three-phase electric engine:
Manufacturer Canton Motors Ltd.
Model MSKG-160L-4SV-TF
Revs 1,440 rpm
15kw power - 440v - 26,3a - 60hz
A tank with a capacity of 200 liters of hydraulic oil.
Winches:
For anchoring and mooring maneuvers has four electric winches type,
namely:
Two reels of anchor windlass installed along deck # 6 (6 th deck) with the
following characteristics:
Manufacturer Ship's Equipment Centre Groningen
BV
Model EHAMW-70U3-160KN
Type Electro-hydraulic
Capacity 350 kN
Speeds 9 meters/minute
18 meters/minute
Brake:
Kind Canvas
Capacity 1,660 kN
Driven by a three-phase electric engine and its hydraulic motor:
Hydraulic motor:
Manufacturer Rexroth GmbH
Model A-6VM-80
Flow 26.2 to 80 cm 3/OMW
Pressure 360 bar
Electric engine:
Manufacturer Ben GmbH
Model 250M-KDF-2-TF-ST RE-SWRevs 3,575 rpm
77kW power - 440v - 121a - 60hz
The reels above have two auxiliary spool containing nylon type of
mooring lines of 56mm x 200 meters.
Directional pulleys and bollards:
At the bow were found the following directional pulleys for mooring lines
and bollards:

Four sets of two directional pulleys with 20 tons capacity each.


Two directional pulleys of simple type with 20 tons capacity each.
Four bollards with capacity of 200 tons each.
Anchors:
Two anchors with the following key features:
Manufacturer Zhengmao Group (Zhenjiang) Anchor
Chain Co. Ltd.
Weight 6225 kg
Moorings:
Two moorings stud link chains with the following characteristics:
Manufacturer Foshan Marine Anchor Chain Co.Ltd.
Material Carbon steel
Grade 3-U (a)
Diameter 70 mm
Bombordo length 302 meters
Starboard 330 meters
Breaking load 3,690 kN
Two mooring winches and general services mooring winchs installed aft
deck # 4 (4 th deck) between ribs # 000 - (-003) with the following
characteristics:
Manufacturer Ship's Equipment Centre Groningen
BV
EHMW-160 Model
Type Electro-hydraulic
Capacity 160 kN
Speed 0-20 m/min
Brake:
Kind Canvas
Capacity 480 kN
Cable:
Material Nylon
Dimensions 56mm x 200m
Breaking load 600 kN
Driven by three-phase electric engine:
Manufacturer Ben GmbH
Model 250M-KDF-2-TF-ST RE-SWRevs 3,575 rpm
77kW power - 440v - 122nd - 60hz
Directional pulleys and bollards:

In the stern were found the following directional pulleys for mooring lines
and bollards:
Four directional pulleys simple type.
Four bollards 200 tons.
Portalo of stairs:
Two ladders accommodations ladders manufactured by Fr. Fassmer GmbH
& Co. KG, installed on the port side and starboard deck # 4 (4 th deck),
namely:
Model 08-1696
Material Aluminum
Dimensions 8.60 x 0.60 m
Steps Twenty-six
Load 1,875 kg
The boarding ladder above has a manufactured by winch Fr. Fassmer
GmbH & Co. KG with the following characteristics:
Model C-81-R
Load kN 10
Lifting speed of 6.60 m/minute
Driven by a three-phase electric engine:
Manufacturer Himmel BV
Model CB-4U-81A100LA
2,6kw power - 440v - 5,3a - 60hz
Helipad:
Helideck support structure built with profiles and welded steel pipes by
IHC Merwede Offshore & Marine, BV, and installed in the bow.
The helipad was built with profiled Aluminium by Marine Aluminium AS
and has the following main features:
Reference 14030
Octagonal format
Dimensions 22.20 x 22.20 meters
Elevation from the keel 34.20 meters
Load 12.80 tons
Fixtures:
Twenty-six manufactured by fixtures Tranberg AS, TEF-2440 model, and
13w - 230VAC - 50/60Hz.
Spotlight:
Four searchlights flood lights manufactured by Tranberg AS, model 9964230, and 50w - 230VAC - 50/60Hz.
A mast folding type equipped with a set of five lamps manufactured by
Tranberg AS, namely:

A TEF-2440 type, red, and 13w - 230/240VAC - 50/60Hz.


Four of the TEF-2440, white type, and 13w - 230/240VAC - 50/60Hz.
The construction of the helipad was approved by the classification Lloyd's
register of Shipping, and was approved to receive aircraft by the type
Sikorsky S-61N and Super Puma.
11 - Line Releases Equipment:
The vessel 'Sapura Onyx "has a launch and retrieval system of flexible
lines and umbilicals designed and supplied by SAS Offshore BV with the
following main equipment.
Lines Storage System:
Roundabouts:
Two carousels rotating baskets # 1 & 2 designed by Maats Tech Ltd,
provided by Marine Fabricators Ltd, and installed in the basements,
namely:
Dungeon # 1 (between ribs # 090 and 057):
A basket carousel # 1 equipped with spooling arm and with the following
key features:
Manufacturer Marine Fabricators Ltd.
OD 23.00 meters
Bore 22.38 meters
Diameter core 9.40 meters
Height 6.70 meters
Volume 2,170 m 3
Maximum capacity 2,500 tons
0-1200 Linear speed m/minute (at the center of the nucleus)
Rotation 0.69 rpm
Rollers 120 350 mm
Diameter of the rings of the rollers:
Internal roller inner ring 12.44 m
External roller outer ring 18.96 m
Powered by five Electric engines three-phase type and their gearboxes.
Five Electric engines:
Manufacturer Rotor NV
Model 6RN-250M-04-E26
Revs 1,780 rpm
Power 30kw - 480V - 44,5a - 60hz
Reducing five boxes:
Manufacturer Motoriduttori Rossi SpA (Habasit)
Model MR-31-320-PU-214-4A
Power 82.5 kw

Diameter 65-550 mm
Arm Spooling:
An articulated arm spooling designed and supplied by Maats Tech Ltd.
with the following key features:
Model 2500T-SPOOLINGASSEMBLY
Type Mobile
Dimensions 15.56 x 9.20 m
Capacity 10 ton. (Arm upright)
5 ton. (Arm horizontally)
8 ton. (Arm and roller upright)
System Drive Arm:
Two cylinders of the hydraulic type for the main part.
A cylinder type hydraulic towards the end.
Giro system Arm:
Two hydraulic motors type:
Manufacturer EKC AB
Model RES-4000M3RAXS1043518SA-4
Planetary reduction
Control cabinet:
A cabin control and monitoring carousel designed by Maats Tech Ltd. and
supplied by Metaallbouw Groot-Ammers BV, reference 130465.
Hydraulic unit:
Hydraulic unit designed and supplied by Motrac Hydraulics BV and
installed aft bilge # 1.
The hydraulic unit above has the following main features:
Service Carousel basket # 1
Model HPU-302 060-P221
Power 33 kw
Pressure 220 bar
The skid above has the following main equipment:
A hydraulic pump manufactured by Linde GmbH with the following
characteristics:
Model HPR-02-55
Revs 1,760 rpm
Flow 97 liters/minute
Pressure 200 bar
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-200L-04A7
Revs 1,765 rpm

30kw power - 440v - 50th - 60hz


A hydraulic oil cooler fan type manufactured by Hydraulic ASA with the
following characteristics:
WO-1019646 Model
Type Centrifugal
Revs 1,700 rpm
Flow 38 liters/minute
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-80M-04V
Revs 1,715 rpm
1,1kw power - 440v - 4,2a - 60hz
A rectangular type of tank with capacity of 380 liters of hydraulic oil.
The skid above has too many lines, valves, actuators and actuation
devices.
Resistors:
Four water heating resistors - electric braking manufactured by Sinus-Jevi
Electric Heating BV namely:
Reference 321881
Horizontal Type
Volume 137.8 liters
Pressure 10 bar
Temperature 0-100 C
The resistors above have the following main equipment:
Two pumps fresh sweet water main cooling water pumps manufactured
by resistors Allweiler GmbH, namely:
Nism-32-160 model/01U3.1D-28/250
Type Centrifuge
Impeller 12.7 mm
Flow 26 m 3/hr (25 m)
Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
HMA2-132-SI-2 model
Revs 3,490 rpm
5,7kw power - 440v - 9,7a - 60hz
Two water pumps salty sea water cooling (resistors) pumps manufactured
by Allweiler GmbH, namely:
Model nism-65-250-22U3.1-38/300
Type Centrifuge
Impeller 222 mm

Flow 66 m 3/hr (20 m)


Driven by three-phase electric engine:
Manufacturer Hoyer Motors AS
Revs 1,740 rpm
7,7kw power - 440v - 13,8a - 60hz
A cooler d'fresh water water cooler manufactured by SPX Flow
Technology Denmark AS, namely:
Q-55 model
Type plates
Thermal power 1200 kw
Surface 13 m 2
Volume 17.60 liters
Note:
The two pumps seawater and the cooler above were installed in the main
winch compartment lines flexible winch room of port storage.
Dungeon # 2 (between ribs # 057 and 030):
A basket carousel # 2 fitted with spooling arm and with the following key
features:
Manufacturer Marine Fabricators Ltd.
OD 18.82 meters
Bore 18.20 meters
Diameter core 5.00 meters
Height 6.30 meters
Volume 1,515 m 3
Maximum capacity 1,500 tons
0-1200 Linear speed m/minute (at the center of the nucleus)
Rotation 1.29 rpm
72 rollers 350 mm
Diameter of the rings of the rollers:
Internal roller inner ring 8.50 m
External roller outer ring 15,00 m
Powered by four Electric engines three-phase type and their gearboxes.
Four Motors:
Manufacturer Rotor NV
Model 6RN-250M-04-E26
Revs 1,780 rpm
Power 30kw - 480V - 44,5a - 60hz
Reducing four boxes:
Manufacturer Rossi SpA Motoriduttori
Model MR-31-320-PU-214-4A

Power 82.5 kw
Diameter 65-550 mm
Arm Spooling:
A spooling articulated designed and supplied by Maats Tech Ltd. with the
following key features:
Model 1500T-SPOOLINGASSEMBLY
Type Mobile
Dimensions 13.65 x 8.70 m
Capacity 10 ton. (Arm upright)
5 ton. (Arm horizontally)
8 ton. (Arm and roller upright)
System Drive Arm:
A cylinder type hydraulic towards the end.
Giro system Arm:
Two hydraulic motors type:
Manufacturer EKC AB
Planetary reduction
Control cabinet:
A cabin control and monitoring carousel designed by Maats Tech Ltd. and
supplied by Metaallbouw Groot-Ammers BV, reference 130465.
Hydraulic unit:
Hydraulic unit designed and supplied by Motrac Hydraulics BV and
installed aft bilge # 1.
The hydraulic unit above has the following main features:
Service basket Carousel # 2
Model HPU-A-302 060-P221
Power 33 kw
Pressure 220 bar
The skid above has the following main equipment:
A hydraulic pump manufactured by Linde GmbH with the following
characteristics:
Model HPR-02-55
Revs 1,760 rpm
Flow 97 liters/minute
Pressure 200 bar
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-200L-04A7
Revs 1,765 rpm
30kw power - 440v - 50th - 60hz

A hydraulic oil cooler fan type manufactured by Hydraulic ASA with the
following characteristics:
WO-1019646 Model
Type Centrifugal
Revs 1,700 rpm
Flow 38 liters/minute
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-80M-04V
Revs 1,715 rpm
1,1kw power - 440v - 4,2a - 60hz
A rectangular type of tank with capacity of 380 liters of hydraulic oil.
The skid above has too many lines, valves, actuators and actuation
devices.
Lines Test Units:
Two tests of flexible units and flushing lines flexible test & flushing units
designed and provided by Flowplant Group Ltd, namely:
Skid Located in the basement # 1:
Reference 2503103
Flow (MPS) 50 liters/minute
(HTP) 41 liters/minute
Pressure 1,034 bar
The skid containing the flexible test unit above has the following main
equipment:
A high pressure pump manufactured by Flowplant Group Ltd with the
following characteristics:
AC-902 454 Model
Flow 180 liters/minute
Pressure 210 bar
Rpm crank speed 510 rpm
Reduction factor 3.48
Driven by a three-phase electric engine:
Manufacturer Brook Crompton Ltd.
AU Model, DF-280-MA
Revs 1,776 rpm
90kw power - 440v - 145th - 60hz
Two small auxiliary pumps with the following characteristics:
Manufacturer Ebata SpA
3LME-32-160-3-06 model
Flow rate 6.24 m3/minute (41 m)

Driven by three-phase electric engine:


Revs 3,420 rpm
3kw power - 440v - 6,1a - 60hz
A set of two dosing pumps air driven liquid pumps with the following key
features:
Manufacturer Haskel Europe Ltd. (Milt on Roy)
Model 8SFD2-224-50732-51875-1
Type Pneumatic
Pressure (maximum) 29,000 psi
A rectangular type of tank with capacity of 1000 liters of water.
A rectangular type of tank with capacity of 160 gallons of chemical.
The skid above has too many lines, valves, actuators and actuation
devices.
Skid Located in Dungeon # 2:
Reference 2503103
Flow rate 10.80 m3/hour
Pressure 1,034 bar
The skid containing the umbilical flushing unit above has the following
main equipment:
Two high pressure pump manufactured by Flowplant Group Ltd with the
following characteristics:
AC-904 282 Model
Flow 60 liters/minute
Pressure 1,030 bar
Rpm crank speed 510 rpm
Reduction factor 3.48
Driven by three-phase electric engine:
Manufacturer Brook Crompton Ltd.
AU Model, DF-315-M
Revs 1,780 rpm
158,4kw power - 480/830V - 225/131a - 60hz
A Hawk Srl manufactured by auxiliary pump with the following features:
Model NMT-1820-ES
Flow 21.40 liters/minute
Pressure 200 bar
Driven by a three-phase electric engine:
Manufacturer & Co. Nicolini
RN-100-C-4 model
Revs 1,780 rpm
Power 4kw - 380/480V - 13.8/9,18a - 60hz

A high pressure pump with the following characteristics:


Manufacturer Haskel Europe Ltd. (Milton Roy)
Model 8SFD2-224-50732-51875-1
Type Pneumatic
Pressure 15,000 psi
Inlet pressure (minimum) 130 psi
A rectangular type of tank with capacity of 1,000 liters of chemical.
The skid above has too many lines, valves, actuators and actuation
devices.
The test units and washing lines flexible flexible test & flushing units
above have a feed pump installed in the basement # 1 with the following
key features:
Manufacturer Ebata SpA
EVML-45-4-3F6 model
Type Centrifuge
Revs 3,530 rpm
Flow 1200 liters/minute (133 m)
Driven by three-phase electric engine:
Manufacturer AEG SpA
Model 160L-AMHE ZA-2Revs 3,550 rpm
Power 18,5kw - 460V - 28,8a - 50hz
Winches:
A main storage winch winch designed and supplied by SAS Gouda BV,
and installed in the room portside winch (ribs between # 107 and 090).
The winch above has the following main features:
Reference 00029155
Model Storage Winch-15T-138mm-3500m
Dimensions 6.68 x 6.93 x 6.17 m
Drum:
Lebus type Sleeve
dimensions 2,622 x 4,194 mm
Capacity 3,590 m (ten layers)
Steel cable 138mm x 3,500 m
Dynamic load 18.00 tons
Rated load 15.00 tons
Static load 22.50 tons
Brake:
Type Pintsch Bubenzer
FBS-63 Model

Torque 630 Nm
Speed 1,000 m/hour
1,200 m/minute
Powered by two Electric engines three-phase type and their gearboxes.
Electric engines:
Manufacturer Rotor NV
Model 5RN-250M-06A-3
Revs 1,181 rpm
Power 44kw - 480V - 70,2a - 50hz
Reducing boxes:
Technisch Buro BV manufacturer Aandrijf
Model RA-C-3513DBS1 HSR-SS-EP-510NK
Planetary type
Reduction factor 1: 137.7328
Each gearbox title It has the respective cooler KRT-Technik GmbH
Klupplungs manufactured by with the following key features:
Model OPC-300M-4D-0.75KW
Type Fan
Thermal capacity 0,75 kw
Pressure 26 bar
Driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
Model W210-80G-4-IE2
Revs 1,740 rpm
0.75kW power - 440v - 1,47a - 60hz
System Spooling:
System spooling device compensator unit designed and supplied by SAS
Gouda BV with the following key features:
Reference 00029639
Dimensions 3.67 x 5.93 x 5.72 m
Operating angle -22.5 to +22.5
Two pulleys 2,484 mm
Speed 2.31 rpm
Dynamic load 18.00 tons
Static load 22.50 tons
Compensator:
Charge 2 - 18 tonnes
Two hydraulic cylinder type:
Manufacturer Apex-Vrmac-Nurmi
Dimensions 80/70 x 400 mm

Volume 8.75 liters


Pressure 229 bar
An accumulator:
Manufacturer Hydac Technology GmbH
Volume 8.75 liters
Driven by a three-phase electric engine and its gearbox.
Electric engine:
Manufacturer Rotor NV
Model 5RN-112M-04
Revs 1,740 rpm
4kw power - 440v - 8,5a - 60hz
Reducing box:
Technisch Buro BV manufacturer Aandrijf
Model RA-213NO 38.75-ME-112
Planetary type
Reduction factor 1: 38.75
An auxiliary winch winch storage designed and supplied by SAS Gouda
BV, and installed in the room to starboard winch (ribs between # 107 and
090).
The winch above has the following main features:
Reference 00029583
Model Storage Winch-15T-76mm-3500m
Dimensions 5.79 x 4.50 x 4.20 m
Drum:
Lebus type Sleeve
dimensions 1,624 x 2,708 mm
Capacity 3,500 m (thirteen layers)
Steel cable 76mm x 3,500 m
Dynamic load 18.00 tons
Rated load 15.00 tons
Static load 22.50 tons
Brake:
Type Pintsch Bubenzer
FBS-63 Model
Torque 630 Nm
Speed 1,000 m/hour
1,200 m/minute
Powered by two Electric engines three-phase type and their gearboxes.
Electric engines:
Manufacturer Rotor NV

Model 5RN-225M-06A-3
Revs 1,177 rpm
Power 36kw - 480V - 57,6a - 50hz
Reducing boxes:
Technisch Buro BV manufacturer Aandrijf
Reference 00031216
Model RA-C-2523DBSR HSR-SS-EP-510NK
Planetary type
Reduction factor 1: 86.3999
Each gearbox title It has the respective cooler KRT-Technik GmbH
Klupplungs manufactured by with the following key features:
Model OPC-300M-4D-0.75KW
Type Fan
Thermal capacity 0,75 kw
Pressure 26 bar
Driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
Revs 1,740 rpm
0.75kW power - 440v - 1,47a - 60hz
System Spooling:
System spooling device compensator unit designed and supplied by SAS
Gouda BV with the following key features:
Reference 00029808
Dimensions 3.16 x 4.43 x 4.00 m
Operating angle -22.5 to +22.5
Two pulleys 1,520 mm
Speed 3.75 rpm
Dynamic load 18.00 tons
Static load 22.50 tons
Compensator:
Charge 2 - 18 tonnes
Manufacturer Apex-Vrmac-Nurmi
Dimensions 80/70 x 400 mm
Volume 8.75 liters
Pressure 229 bar
Accumulator 8.75 liters
Driven by a three-phase electric engine and its gearbox.
Electric engine:
Manufacturer Rotor NV
Model 5RN-112M-04

Revs 1,740 rpm


4kw power - 440v - 8,5a - 60hz
Reducing box:
Technisch Buro BV manufacturer Aandrijf
Model RA-213NQ 38.75-ME-112
Planetary type
Reduction factor 1: 38.75
Tower:
Launch tower and recovery of flexible lines and umbilicals designed and
supplied by SAS Offshore BV and installed by the IHC Merwede
shipyard-Offshore Marine BV between ribs # 110-90, and has the
following main features:
C-376 model
Material Steel naval soldier
Type Mobile
The frame format
Extreme Dimensions 16.51 x 11.68 x 54.37 m
Overall height x 63.00 meters
Operating angle 90 to 80
Capacities:
Primary system Secondary
System
Dynamic load (winch) 615 tones 200 tones
(Socket) 590 tones 190 tones
Vel.de Recover. (Full load) 500 m/hr 500 m/hour
Vel.de launch. (Full load) 600 m/hr 600 m/hour
Vel.de Recover. (Half full) 1,000 m/hour 1,000 m/hour
Vel.de launch. (Half full) 1.200 m/minute 1200m/minute
Diameter steel cables 138mm 76mm
Length of steel cables 3,000 m 3,000 m
Two pulleys Two
Tilt tower system:
Tower tilting system designed and supplied by SAS Offshore BV has
three hydraulic cylinders type double acting cylinders LD-LS with the
following key features:
Manufacturer IHC Vremac Cylinders BV
Reference 001-004-971
VDL-530-330x3762 model
Hydraulic Type
Pressure 300 bar

Dimensions of the cylinders 530 mm x 3.76 m


Pistons 330 mm x 3.76 m
Overall length 7.37 m
Capacity 3,254 kN (148 bar)
4,254 kN (315 bar)
Two pivots type clevis
Tilt angle of 90 to 80
Tensioners:
Two tensioners designed and supplied by SAS Offshore BV and installed
in the tower.
Tensioners above have the following main characteristics:
Reference 00028263
Dimensions 10.75 x 8.47 x 8.96 m
Model
300T-4TRACKTENSIONER1472KN-M-TRACK-550-720M/H/HR

Type Four tracks cross


Capacities:
Dynamic load (four tracks) from 290.00 to 300.00 tons
Static load (two tracks) 375.00 tons
Dynamic load (two tracks) 138.00 tons
Static load (two tracks) 187.50 tons
Diameter of the lines 100-630 mm (four tracks)
50-100 mm (two tracks)
Brake:
Manufacturer Pintsch Bubenzel
SFB-100-HS model
Type Disk
Torque 1,150 Nm
Speeds
Release Speed 1200 m/hr (150 tons)
720 m/hour (300
tons)
Recovery speed 950 m/hr (150 tons)
550 m/hour (300
tons)
Tracks:
Number Four
Type Vagle-160
Each track above is driven by an Electric engine of the three-phase type
and its gearbox.

Four Electric engines:


Manufacturer Rotor NV
Model 5RN-315L-06A-7
Revs 1,188 rpm
158kw power - 690v - 236th - 60hz
Reducing four boxes:
Technisch Buro BV manufacturer Aandrijf
EH-70004, SC-2N Model
Reduction factor 1: 488.5246
Each gearbox has refriamento unit cooling unit, namely:
Manufacturer Klupplungs Technik GmbH
Model OPC-300M-12D
Type Fan
Thermal capacity 0,75 kw
Driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
0.75kW power - 440v - 1,05a - 60hz
Winches Traction:
A traction winch traction winch designed and supplied by SAS Offshore
BV and installed the tower port.
The traction hoist above has the following main features:
Reference 00031522
Dimensions 11.56 x 3.85 x 4.39 m
Model TRACTIONWINCH-610T-138mm
Dynamic load 610 tons
Maximum load 705 tons
Speeds
Launch speed 10.00 m/min (full load)
20.00 m/minute (half
load)
Recovery speed 8.33 m/min (full load)
16.67 m/minute (half
load)
Brake:
Manufacturer Pintsch Bubenzel
SFB-100-HS model
Type Disk
Torque 1,150 Nm
Two drums of 2,760 x 4,400 mm
Steel wire:

Diameter 138 mm
Tensile 15,300 kN
Charge indicator:
Model MEASURINGSHEAVE610T-138mm90 AOC

Vertical Type
Load 610 tons
Maximum load 705 tons
Diameter 3028 mm
Located pulley (tower top)
Each barrel above is driven by four Electric engines three-phase type and
its gearbox.
Eight Electric engines:
Manufacturer Rotor NV
Model 5RN-315L-06A-7
Speed 988 rpm
132KW power - 690v - 236th - 60hz
Reducing eight boxes:
Technisch Buro BV manufacturer Aandrijf
Reference 00028898
Model GBA-18003-Cl-FS-104.4AV1020TC
Reduction factor 1: 104.3823
Each gearbox has refriamento unit cooling unit, namely:
Manufacturer Klupplungs Technik GmbH
Model OPG-400M-16D-0.75KW
Type Fan
Thermal capacity 0,75 kw
Driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
Revs 3,520 rpm
0.75kW power - 440v - 1,05a - 60hz
A traction winch traction winch designed and supplied by SAS Offshore
BV and installed the tower port.
The traction hoist above has the following main features:
Reference 00029309
Dimensions 8.70 x 2.79 x 3.49 m
Model TRACTIONWINCH-200T-76MM
Dynamic load 200 tons
Maximum load 230 tons
Speeds

Launch speed 10.00 m/min (full load)


20.00 m/minute (half
load)
Recovery speed 8.33 m/min (full load)
16.67 m/minute (half
load)
Brake:
Manufacturer Pintsch Bubenzel
SFB-100-HS model
Type Disk
Torque 1,000 Nm
Two drums of 1,444 x 3,100 mm
Steel wire:
Diameter 76 mm
Breaking load 5,315 kN
Charge indicator:
Reference 00041737
Model MEASURINGSHEAVE200T-76MM90 AOC

Vertical Type
Load 200 tons
Maximum load 230 tons
Diameter 1673 mm
Located pulley (tower top)
Each barrel above is driven by two Electric engines three-phase type and
its gearbox.
Four Electric engines:
Manufacturer Rotor NV
Model 5RN-315M-06A-7
Speed 988 rpm
90kw power - 690v - 164a - 60hz
Reducing four boxes:
Technisch Buro BV manufacturer Aandrijf
Reference 00028945
Model RA-LV + 6003F1S1-56.8AV510TLK
Reduction factor 1: 56.865
Each gearbox has refriamento unit cooling unit, namely:
Manufacturer Klupplungs Technik GmbH
Model OPG-400-F-4D-0.75KW
Type Fan

Thermal capacity 0.26 kw


Driven by a three-phase electric engine:
Manufacturer Comes Motors GmbH
Revs 1,430 rpm
0.75kW power - 440v - 1,65a - 60hz
Alignment rail:
Alignment rail alignement chute provided and designed by IHC &
Engineering Business BV and installed on top of the tower.
The alignment rail has the abovementioned hydraulic type drive system.
Pulleys:
Two pulleys steel cable 138 mm sheaves designed and provided by
SAS Offshore BV and installed at the upper end of the tower (pole A &
R).
The pulleys above have the following main characteristics:
Reference 00041734
Model sheave-610T-138mm-90 AOC
Vertical Type
Dimensions 3028 x 980 mm
Dynamic load 610 tons
Maximum load 705 tons
Steel cable 138 mm
Two pulleys from 76 mm wire rope sheaves designed and provided by
SAS Offshore BV and installed at the upper end of the tower (pole A &
R).
The pulleys above have the following main characteristics:
Model sheave-200T-76MM-90 AOC
Vertical Type
Dimensions 1673 x 780 mm
Dynamic load 200 tons
Maximum load 230 tons
Steel cable 76 mm
Centralizing cable:
Cable centering system driven by three hydraulic cylinders type.
Maintenance Crane:
Maintenance crane designed and supplied by Cranes Heila SpA with the
following key features:
HLRM Model-340/2-S
Spear Knuckle boom and telescopic
Capacity 20 tons (12 meters)
Brake Disc

The crane working system has hydraulic motors and their reducers with
the following characteristics:
Hydraulic motors:
Manufacturer Atlantic Fluid Tech SpA
Model MB-000 319
Reducing:
Manufacturer Brevini Riduttori SpA
Model SLS-3003Dce
Planetary type
Reduction factor 1: 93.6
The hoisting system of the boom has hydraulic cylinders type.
Monorails:
Two monorails/hoists to aid the release chores and maintenance designed
and supplied by Van Leusten BV, and installed in the tower above the
work table.
The monorail/hoist above have the following main characteristics:
Location Bombordo and starboard
Electric type
Capacity 20 tons
Driven by Electric engines three-phase type of 3kw - 440v - 8,6a - 60hz.
Working Table:
Desk work table designed and supplied by IHC Engineering Business &
BV, and installed under the tower.
The desk has the following main features:
Reference EB-74500
Type Hydraulic
Two sections type mobile
Dimensions 10.70 x 8.63 meters
4.29 x 8.63 meters
Length (Extended) 17.43 meters
Maximum load 610 tons
System Changes in the Board:
Four hydraulic cylinders for moving the two sections of the working table
with the following characteristics:
Manufacturer Ruhfus Hydraulic System BV
Reference EB-67417
Dimensions 220/160 x 3,570 mm
Pressure 325-160 bar
The desk also has the following equipment:

A skid for moving pallet skid equipment unit designed and supplied by
Hystad System Ltd. with the following key features:
Dimensions 6.43 x 6.06 m
Transfer 9,00 m
Capacity 45 tons
Driven by two cylinders of the hydraulic type, namely;
Reference EB-74779
Dimensions 170 x 1,000 mm
Pressure 170-325 bar
Hang a necklace - off with 610 tons capacity, and equipped with hydraulic
swivel type for alignment of drilling the flanges.
Submarine System Release:
Submarine delivery system designed and supplied by IHC Handling
Systems BV
Three shackles of hydraulic type hidraulic release shackles with the
following key features:
An amount shackle
Reference 1400091-0-001
Model GA-600THIDRAULICRELEASESHACKLE
Dimensions 1.81 x 1.22 x 0.78 m
Maximum load 600 tons
An amount shackle
Reference 1400091-0-002
Model GA-400THIDRAULICRELEASESHACKLE
Dimensions 1.59 x 1.10 x 0.78 m
Maximum load 400 tons
An amount shackle
Reference 1400091-0-003
Model GA-200THIDRAULICRELEASESHACKLE
Dimensions 1.33 x 0.83 x 0.63 m
Maximum load 200 tons
The system also has booking engine for manual opening or in emergency
cases, by remote control vehicle ROV.
Tensioners:
Two auxiliary tensioners tensioners vertical loading designed and
supplied by SAS Offshore BV and installed on the port side of the deck #
4.
Tensioners above have the following main characteristics.
Reference 00057201
Dimensions 5.72 x 2.45 x 3.64 m

Model

30T-VERTICALTENSIONER500KN-M-TRACK-600M/H/HR

Type Two vertical tracks


Capacities:
Dynamic load 30.00 tons
Static load 35.00 tons
Diameter of the lines 100-630 mm (four tracks)
50-100 mm (two tracks)
Brake:
Manufacturer Pintsch Bamag
FBS-40 Model
Type Disk
Torque 350 Nm
Speeds
Launch speed 600 m/hour
Recovery speed of 600 m/minute
Tracks Vagle-160
Driven by two Electric engines three-phase type and their gearboxes:
Electric engines:
Manufacturer Rotor NV
Model 5RN-225MO 6A-3Revs 1,177 rpm
Power 36kw - 480V - 57,5a - 60hz
Reducing boxes:
Reference 00058086
Reduction factor 1: 242.3929
Each title has tensioner designed hydraulic unit and supplied by Parker
Hannifin Vas Netherlands BV, as follows:
Model N25-02428
Flow 28 liters/minute
Pressure 320 bar
A hydraulic pump with the following features:
Manufacturer Parker GmbH
Model PVCMAM1N1
Type Axial
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Revs 1,750 rpm
17,3kw power - 440v - 29,3a - 60hz
A rectangular type of tank with capacity for 160 liters of hydraulic oil.

A tensioner type tires top loading hauler designed and supplied by


Parkburn Precision handling Systems Ltd. and installed the starboard
deck # 4.
The tensioner type tires above has the following main features.
Reference C-2035C-001-0002
Model 2T-2WHEELPAIR (2WP) ELECTRIC HAUREAD

Diameter lines 15-630 mm


Capacity 2 tons
Speed 20 m/min (1 ton)
10 m/minute (2 tons)
Castors (2) 18x7-inch rubber ti
po Dowty Lce of
18x7x8-inch
Powered by four Electric engines three-phase type and their gearboxes:
Electric engines:
Manufacturer Leroy Somer SA
Model-100-L FLS
Revs 1,435 rpm
2.2kW power - 440v - 4,8a - 60hz
Reducing boxes:
Manufacturer Brevini Riduttori SpA
Model ET-3020-MR
Planetary type
Reduction factor 1: 92.2
Two drives:
Manufacturer Quality Hydraulic Power Ltd.
Horizontal Type
Pressure 345 bar
The tensioner type tires above has a system rails (four sections) installed
forward of the two hatches to starboard.
Winches:
Eight auxiliary winches installed in different points of the deck # 4,
namely:
An initiation initiation winch winch designed and supplied by SAS
Offshore BV, located forward of the tower on the deck # 4, with the
following main features:
Reference 00058601
Model INITIATIONWINCH40T-48MM-400M
Dimensions 4.15 x 2.51 x 2.01 m

Dynamic load 40 tons


Static 45 tons
Speed 1,200 m/min
960 m/minute
Drum:
Type Plain overwind
Dimensions 952 x 1,125 mm
Capacity 400 m (five layers)
Steel wire:
Type Galvanized
Dimensions 48 mm x 400 m
Brake:
Manufacturer Pintsch Bubenzer
SFB-100-HS model
Type Disk
Torque 1,150 Nm
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Rotor NV
Model-5RN 315LO 6A-6Revs 1,187 rpm
Power 132KW - 480V - 198th - 60hz
Reducing box:
Reference 00060714
Reduction factor 1: 286.73
Two spooling winches designed charging auxiliary winches and supplied
by SAS Offshore BV, installed on the port side of the deck # 4, and the
following key features:
A winch:
Reference 00058083
Model SPOOLINGWINCH-30T-36MM-220M
Dimensions 3.66 x 2.27 x 1.95 m
Dynamic load 30 tons
Static 35 tons
Speed 960 m/minute
1,200 m/minute
Drum:
Type Plain overwind
Dimensions 828 x 935 mm
Capacity 220 m (five layers)

Steel wire:
Type Galvanized
Dimensions 36 mm x 220 m
Brake:
Manufacturer Pintsch Bubenzer
Model SFB-63/70-S
Type Disk
Torque 700 Nm
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Rotor NV
Model-5RN 315LO 6A-6Revs 1,182 rpm
Power 132KW - 480V - 198th - 60hz
Reducing box:
Manufacturer Zolern GmbH & Co. KG
Reference 00041982
Model ZPH-4:23-EG
Reduction factor 1: 206.13
A winch:
Reference 00043003
Model SPOOLINGWINCH-30T-40MM-350M
Dimensions 4.06 x 2.27 x 1.95 m
Dynamic load 30 tons
Static 35 tons
Speed 1200 m/minute
1,500 m/hour
Drum:
Type Plain overwind
Dimensions 868 x 935 mm
Capacity 350 m (five layers)
Steel wire:
Type Galvanized
Dimensions 40 mm x 350 m
Brake:
Manufacturer Pintsch Bubenzer
SFB-100-HS model
Type Disk
Torque 1,150 Nm
Driven by a three-phase electric engine and its gearbox:

Electric engine:
Manufacturer Rotor NV
Model-5RN 315LO 6A-6Revs 1,182 rpm
Power 132KW - 480V - 198th - 60hz
Reducing box:
Manufacturer Zolern GmbH & Co. KG
Reference 00041982
Model ZPH-4:23-EG
Reduction factor 1: 206.13
A winch designed auxiliary winch and auxiliary load supplied by IHC
Hytop BV, installed on the port side of the deck # 4, with the following
main features:
Reference 55120-900-01
EW-200
Capacity 20,000 kgs
Speed 10 m/min
Steel wire:
Type Galvanized
Dimensions 38 mm x 268 m
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model 225-S/M-04
Type Three Phase
Revs 1,780 rpm
Power 45kw - 460V - 69a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Type Helical bevel
Reduction factor 1: 109.7
An auxiliary winch of auxiliary loading winch designed and supplied by
IHC Hytop BV, installed underneath the tower to starboard deck # 4, with
the following main features:
Reference 55120-800-01
EW-100
Capacity 10,000 kgs
Speed 10 m/min
Steel wire:
Type Galvanized

Dimensions 28 mm x 262 m
Electromagnetic brake
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model F-180/L-04
Type Three Phase
Revs 1,770 rpm
Power 22kw - 460V - 35,4a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Planetary type
Reduction factor 1: 414.6
A charging auxiliary hoist auxiliary winch designed and supplied by IHC
Hytop BV, located aft on the port side of the tower deck # 4, with the
following main features:
Reference 55120-800-03
EW-100
Capacity 10,000 kgs
Speed 10 m/min
Steel wire:
Type Galvanized
Dimensions 28 mm x 262 m
Electromagnetic brake
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model F-180/L-04
Type Three Phase
Revs 1,770 rpm
Power 22kw - 460V - 35,4a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Planetary type
Reduction factor 1: 414.6
An auxiliary winch of auxiliary loading winch designed and supplied by
IHC Hytop BV, installed underneath the tensioner type tires starboard
deck # 4, with the following main features:
Reference 55120-800-02
EW-100

Capacity 10,000 kgs


Speed 10 m/min
Steel wire:
Type Galvanized
Dimensions 28 mm x 262 m
Electromagnetic brake
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model F-180/L-04
Type Three Phase
Revs 1,770 rpm
Power 22kw - 460V - 35,4a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Planetary type
Reduction factor 1: 414.6
An auxiliary winch of auxiliary loading winch designed and supplied by
IHC Hytop BV, located on the edge of the starboard aft deck # 4, with the
following main features:
Reference 55120-800-04
EW-100
Capacity 10,000 kgs
Speed 10 m/min
Steel wire:
Type Galvanized
Dimensions 28 mm x 262 m
Electromagnetic brake
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model F-180/L-04
Revs 1,770 rpm
22kw power - 440v - 35,4a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Planetary type
Reduction factor 1: 261.3

An auxiliary winch auxiliary winch designed and supplied by IHC Hytop


BV, located aft of the starboard hatch on the deck # 4, with the following
main features:
Reference 55120
EW-50
Capacity 5,000 kgs
Speed 10 m/min
Steel wire:
Type Galvanized
Dimensions 19mm x 265 m
Electromagnetic brake
Driven by a three-phase electric engine and its gearbox:
Electric engine:
Manufacturer Weg Electric Equipment SA
Model F-160/L-04
Revs 1,765 rpm
15kw power - 440v - 25,5a - 60hz
Reducing:
Manufacturer Brevini Riduttori SpA
Planetary type
Reduction factor 1: 261.3
Three auxiliary hoists auxiliary winches designed and supplied by Brevini
Winches Ltd, installed (two) in the holds of baskets rides and (one) in the
structure of the aligner (top of the tower), with the following
characteristics
Model EGO-065
Type Argano
Drum 446 x 235 mm
Capacity 5,500 kgs
Speed 20 m/min
Steel wire:
Type Galvanized
Dimensions 16 mm x 60 m
Electromagnetic brake
Motor driven hydraulic type and its gearbox:
Hydraulic motor:
Displacement 160 cm3/rev
Flow 75 liters/minute
Pressure 250 bar
Reducing:

Manufacturer Brevini Riduttori SpA


Planetary type
Reduction factor 18.9
Brake 89 Nm
Hydraulic units:
A hydraulic unit of the main tensioners designed and supplied by SAS
Gouda BV with the following characteristics:
Winch room located starboard
Reference 00050285
Model HPU-320BAR-780L/MIN-4000L-440V-60HZ
Flow 780 liters/minute
Pressure 320 bar
The skid above has the following main equipment:
Three hydraulic pumps Rexroth GmbH manufacture with the following
characteristics:
Model A4VSO-180DRG/30R-PPB13N00
Flow 255 liters/minute
Pressure 320 bar
Driven by three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-315M-04E23
Revs 1,786 rpm
152kw power - 440v - 240a - 60hz
A hydraulic oil circulation pump Parker Manufactured by GmbH with the
following characteristics:
Screw Type
Flow 170 liters/minute
Pressure 35 bar
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-160M-04
Revs 1,750 rpm
11kw power - 440v - 19,8a - 60hz
A hydraulic oil cooler of manufactured by Rexroth GmbH with the
following characteristics:
Model 810 764
Casco-type tubes
Thermal capacity 70 kw
Pressure (hull) 20 bar
(Pipes) 10 bar

Two hydraulic oil filters Rexroth GmbH manufacture with the following
characteristics:
Model 40FLD-0271-H10XL-A00-07V2.2-80MOA
Vertical Type
Pressure 40 bar
R-928000404 element
Three hydraulic oil filter Rexroth GmbH manufactured by the vertical
type.
A rectangular type of tank with capacity of 4,000 liters of hydraulic oil.
The skid above has too many lines, valves, actuators and actuation
devices.
A hydraulic unit of the equipment installed in the tower designed and
supplied by IHC Hytop BV with the following characteristics:
Winch room located starboard
Reference HY-54652
Flow 308 liters/minute
Pressure 290 bar
The skid above has the following main equipment:
Two hydraulic pumps Parker Manufactured by GmbH with the following
characteristics:
PV-140R9K1T1NYLWK0399 model
Flow 154 liters/minute
Pressure 290 bar
Driven by an Electric engine of the three-phase type:
Manufacturer Regal Beloit BV (Marathon Electric)
HJN-Model 280-S-4
Revs 1,775 rpm
90kw power - 460/790v - 138/79,7a - 60hz
A hydraulic oil circulation pump Rexroth GmbH manufacture with the
following characteristics:
Screw Type
Flow 6 liters/minute
Driven by a three-phase electric engine:
Manufacturer Regal Beloit BV (Marathon Electric)
HJN Model M-132-4Revs 1,752 rpm
9kw power - 460/795v - 15.2/7.8A - 60hz
A hydraulic oil cooler manufactured by KHT Hydac AS with the
following characteristics:
HEX Model S-522-30/00-G1 1/2

Type plates
Pressure 30 bar
Two hydraulic oil filter Hydac Technology GmbH manufactured by, the
vertical type.
A rectangular type of tank with a capacity of 4.00 m 3 hydraulic oil.
The skid above has too many lines, valves, actuators and actuation
devices.
Two hydraulic units serving both Carousels baskets designed and
supplied by Motrac Hydraulics BV, and installed aft bilge # 1.
The hydraulic units above have the following main characteristics:
Service Carousel baskets # 1 and # 2
Model HPU-302 060-P221
Power 33 kw
Pressure 220 bar
Each skid above has the following main equipment:
A hydraulic pump manufactured by Linde GmbH with the following
characteristics:
Model HPR-02-55
Revs 1,760 rpm
Flow 97 liters/minute
Pressure 200 bar
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-200L-04A7
Revs 1,765 rpm
30kw power - 440v - 50th - 60hz
A hydraulic oil cooler fan type manufactured by Hydraulic ASA with the
following characteristics:
WO-1019646 Model
Type Centrifugal
Revs 1,700 rpm
Flow 38 liters/minute
Driven by a three-phase electric engine:
Manufacturer Rotor NV
Model 5RN-80M-04V
Revs 1,715 rpm
1,1kw power - 440v - 4,2a - 60hz
A rectangular type of tank with capacity of 380 liters of hydraulic oil.
The skids above have other lines, valves, actuators and actuation devices.

A hydraulic unit serving the drive system of the two doors of the moon
pool designed and supplied by A. Van Tilburg BV Hydrauliek with the
following key features:
Winch room located starboard
Reference HY-0335
Model HYI-436 200
Flow 9.40 liters/minute
Pressure 210 bar
The skid above has the following main equipment:
A hydraulic pump Bosh Rexroth GmbH manufactured by, namely:
Model PGF2-2X-006RA-01VP2
Submerged type
Flow 9.40 liters/minute
Driven by a three-phase electric engine:
Manufacturer Weg Electric Equipment SA
Model 132-S-04
Revs 1,765 rpm
Power 5,5kW - 460V - 7,65a - 60hz
A rectangular type of tank with capacity of 200 liters of hydraulic oil.
The skid above has too many lines, valves, actuators and actuation
devices.
Floats:
Twenty-two floats risers installation buoys designed and supplied by
Matrix Composites & Engineering Ltd. with capacity for operations in
water depths up to 3,000 meters deep, namely:
Four floats 84 kgs (3,000 m).
Four floats 129 kg (3,000 m).
Four floats 536 kg (3,000 m).
Three sets with two floats 536 kg (3,000 m).
A set of four floats 536 kg (3,000 m).
Control rooms:
A control room pipelay control room installed in a 20-foot container
containing several drive panels of launching tensioners 615 and 200 tons,
the winches, the tensioners fore and aft, monitoring panels, etc.
The container above was positioned above the Diesel group compartment
emergency generator (port side of the deck # 4).
A control room in the launch and recovery operations of flexible lines
operations room installed aft deck # 8 (8 th deck).
Underwater Inspection System:

Navigation and survey designed and supplied by Quetzal Ltda, and


equipped with type Precisenav software.
It offers control panel and repeaters respective installed on the bridge, the
IOM offices and the customer in the control rooms of ROVs, and the
launch room lines.
12 - Remote Control Vehicles:
The vessel 'Sapura Onyx "has two remote control vehicles ROV (s)
remote operated vehicles with the following characteristics:
Located Bombordo decks
Starboard decks
Manufacturer Total Marine Technology Pty. Ltd.
Model Typhoon-Mk.2-150
Lamina d'maximum water 3000 meters
Dimensions 3.60 x 1.90 x 2.40 m
Weight 5,500 kg
Power 150 hp
Electric engine:
Submersible motor manufacturer Engineering Ltd.
Model-ROV14-150HP 4Pole3000/3/60
Power 93kw - 3.000vac - 60hz
Main pump:
Manufacturer Rexroth GmbH
Model AA10VO-140L-DFR1/31R
Pressure 3,000 psi
Flow 245 liters/minute
Auxiliary pump:
Manufacturer Rexroth GmbH
Model A10VO-45-DFR1/31L
Pressure 3,000 psi
Flow 78 liters/minute
Thrusters Four vertical and four horizontal
Thrusters Verticals:
Manufacturer Sub Atlantic Ltd.
Model SA-PH-30030-2
Thrusters Horizontal:
Manufacturer Sub Atlantic Ltd.
Model SA-PH-38041
Tether:
Manufacturer Nexans Norway AS
KI-193-04 Model

Diameter 35 mm
Length 550 meters
Hydraulic arms:
Manufacturer Schilling Robotic Ltd.
Model Atlas-7R
Seven functions
Reach maximum 65.5 inches
Aperture 7.8 inches
Maximum load 250 kg extended
Maximum torque 205 Nm
Manufacturer Schilling Robotic Ltd.
Model Conan-7P-Proportional
Seven functions
Reach maximum 71.1 inches
Aperture 7.8 inches
Maximum load 181 kg extended
Maximum torque 205 Nm
Cameras:
Manufacturer Kongsberg AS
Models (1) OE15-101CNTSC-B & W-Nearsit
(1) OE14-367A-NTSC-ColorZoom
(1) OE15-109 NTSC-LC-B & W
(1) OE14-111-NTSC-MiniColor
Colored types and Mono-Chrome
Sonar:
Manufacturer Kongsberg AS
Model 1171HD-IMAG
Reach 200 meters
Depht X-ducer Valeport-Mini-IPS
Manufacturer Valeport Ltd.
Model 3000-MSW0.01% -FS depth accuracy
Gyroscopic:
Manufacturer Teledyne CDL
Model TOGSNAV
Type Fiber Optical Gyro
Altimeter:
Manufacturer Valeport Ltd.
Model IPS
DVL:

Manufacturer Teledyne Inc.


Model Workhorse Navigator-1200khz
Reaches 30 m bottom range
14 m water profiling
range
Transponders:
Amounts Six
Manufacturer Kongsberg AS
MST342-N Model
Five quantities
Manufacturer Kongsberg AS
Model C-Node - MAXI-34-30V-R
Type High Definition
Tether Management System TMS:
Manufacturer Forum Energy Technologies Ltd.
Model 5a
Lamina d'maximum water 3000 meters
dimensions 2,100 x 2,210 mm
Weight 3,200 kg
Electric engine:
Submersible motor manufacturer Engineering Ltd.
512DP-1019 model
Power 7.5kW - 2.400v - 2.5a - 60hz
Hydraulic pump:
Manufacturer Danfoss Ltd.
Model SAM-HT-500C4-N-M10CL
Type Variable displacement
Drum:
Capacity 750 m
Model RT-337Boyant SCV Tether 35mm
Camera OE14-111NTSC-MiniColor
Tools Tooling Skid:
Manufacturer Total Marine Technology Pty. Ltd.
Model MK-11-150 - 0005-3479
Lamina d'maximum water 3000 meters
Dimensions 3.60 x 1.90 x 0.45 m
Weight 280 kg
Hydraulic pump:
Manufacturer Dynaset Ltd.
Model HPW-520/30-85

Pressure 200-5000 psi


System Release Date:
The launch and recovery system remote control vehicle was mounted on
a skid, namely:
The frame:
Manufacturer Subsea Innovation Ltd.
Reference XWM-90
Type A-Frame LARS
Dimensions (extended) 6.00 x 4.00 x 7.00 m
Weight 27 tons
Maximum load 15 tons
The frame above has a folding type extension platform.
Winch:
Manufacturer Lebus International Engineers Ltd.
Model F-669-MARS
Load 130 kN
Lifting speed of 72 meters/minute
Umbilical (Cabo Armed):
Manufacturer Nexans Norway AS
Type Steel Armoured - 4.5Kv - RS679
Dimensions 36.4 mm x 3.300 m
Breaking load 665 kN
Driven by a hydraulic motor:
Manufacturer Viking Motors AS
Model MB - 84 - 25100BO - XN
Central Hydraulics:
Hydraulic control unit for activating the "A" frame and its winch was
mounted on a skid, and has the following main features:
Designed Rexroth GmbH
Reference 12-063-259MARS
Dimensions 2.80 x 1.40 x 2.81 m
Weight 4600 kg
Power 200 kw
Pressure 3,000 psi
Flow 440 liters/minute (250cc/rev)
Winch pump:
Manufacturer Rexroth GmbH
Model A-4CSG-250
Type Axial piston (closed loop)
Lars pump:

Manufacturer Rexroth GmbH


Model A10VSO 71
Axial piston type (open loop)
Driven by three-phase electric engine:
Manufacturer Hoyer AS
Model 315B-5T
210kW power - 440v - 60hz
A tank with rectangular shape and with capacity for 800 liters of
hydraulic oil.
Control system:
Island control and monitoring system of the ROV installed in a
compartment located starboard deck # 5 (5 th deck).
Hydraulic unit support:
Hydraulic support unit flushing unit & charger carter for compensation
and treatment oil.
Manufacturer Forum Subsea Tooling Ltd.
Dimensions 1.60 x 1.03 x 1.15 m
Power 22 kw
Hydraulic pump:
Manufacturer Kompass GmbH
Model P36 FR-B3Electric engines:
A main engine:
Manufacturer Techtop Industries Inc.
22kw power - 440v - 60hz
An auxiliary engine:
Manufacturer Techtop Industries Inc.
0,37kw power - 440v - 60hz
Transformers:
Four transformer with the following characteristics:
A transformer of hydraulic unit ROV:
Manufacturer TMC Transformers
Type Three Phase
Power 200 kva
Voltage 420V - 3.050v
A transformer of hydraulic unit of TMS:
Manufacturer Universal Transformers
Model T-5966
Type Three Phase
Rating 16 kva

420-440-460-480v voltage (21a) - 2.300v (3.5A)

A transformer ROV instrumentation system:


Manufacturer Universal Transformers
Model T-3774
Type Three Phase
Power 8 kva
420-440-460-480v voltage (18a) - 2.300v (3.5A)
A transformer TMS instrumentation system:
Manufacturer Universal Transformers
Model T-3771
Type Three Phase
3 kva power
420-440-460-480v voltage (7a) - 2.300v (1,3a)
Tools:
Remote control vehicles above have the following main tools.
Hydraulic cutters:
Four hydraulic cutters wire rope cutters WebTool Manufactured by Ltd.
(Allspeeds), namely:
Quantity A
Model LP-40-RCO
Maximum diameter 38 mm
Capacity 1,960 N/mm 2
Adapters 7/16 inch male JIC
Powered by hydraulics:
Flow 4-14 liters/minute
Pressure 210 bar
Quantity A
RCV-75-HD model
Maximum diameter 76.2 mm
Capacity 1,960 N/mm 2
Adapters 7/16 inch male JIC
Powered by hydraulics:
Flow 4-14 liters/minute
Pressure 210 bar
Quantity A
RCV-115
Maximum diameter 115 mm
Capacity 1,770 N/mm 2
Adapters 7/16 inch male JIC
Powered by hydraulics:

Flow 4-14 liters/minute


Pressure 690-210 bar
Quantity A
RCV-155 Model
Maximum diameter 155 mm
Capacity 1,880 N/mm 2
Adapters 7/16 inch male JIC
Powered by hydraulics:
Flow 4-14 liters/minute
Pressure 690-210 bar
Blasters:
Two blasters high pressure jetting high pressure pumps of manufactured
by Dynaset Ltd, namely:
Quantity A
Model HPW-200/ST-AB-30-45-Al
Water Product
Speed 750 rpm
Flow 30 liters/minute
Pressure 200 bar
Quantity A
Model HPW-420/AP-M-20-50
Glycol Product
Speed 780 rpm
Flow 20 liters/minute
Pressure 420 bar
Centrifugal Pump:
A centrifugal pump type high flow centrifugal pump manufactured by
Hypro Co, namely:
9303-S model
Flow 147 gpm
Pressure 145 psi
Driven by hydraulic motor type.
Two torque verification unit verification tool torque manufactured by
units Subsea Tooling Forum Ltd, namely:
Quantity A
ISO-13628-8 Class1-4 model (API 17D)
Type Surface
Maximum torque 2,700 Nm
Quantity A
ISO-13628-8 Class1-4 model (API 17D)

Type Subsea
Maximum torque 2,700 Nm
An intelligent torque drive smart torque tool manufactured by Total
Marine Technology Pty Ltd, viz.:
Model Mk-2
Dimensions 510x225x165 mm
Torque 20-3000 Nm
Driven hydraulic system 207 bar.
A tool torque conversion unit conversion unit manufactured by Total
Marine Technology Pty Ltd, viz.:
Model A-019-958-601
Dimensions 510x225x165 mm
20-3.000Nm torque (class 1-4)
Pressure 207 bar
Adapters Class 1 & 2 - 11/16 "sq
Class 3 - 1-1/8 "sq
Class 4 - 1-1/2 "sq

Potrebbero piacerti anche