Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
coming home, leaving home, footwell lighting(lights up with light on @ 20% or higher brightness) and
others... some options show up AFTER you have enabled the feature or disable the feature.
go to 17-instruments, follow above steps and you will see brake pad sensor and seatbelt chime options
-HALOGEN DRL AT FULL INTENSITY WITH MAIN BEAMS
Module 09
go to Secure access using code :"20113" 12233
go to adaptation
Channel 4: DRL as Positionlight Brightness...as a default we have 37% here.This means that as position
light day work at 5 w intensity.You can set this value up to 100% to have them at full intensity (13w) with
main beams on
"Test" "save" and then "Done, go back"
There are two more channels to change things here, but not very useful in my view:
Channel 1: Brightness of DRL
Channel 2: Brightness of Mains with Highbeam on
-Leaving Home Lights
This feature turns on your lights when you unlock the car (if your headlight switch is on). I believe this
option is standard if you have the auto lights option. This also adds an option in the MFD lights menu for
how long it will stay on.
Module 09 - Cent. Elects.
Coding
Byte 0
Bit 5 - Assistance Driving Light_Leaving Home active
Coming Home Lights Active Time
This sets how long the comning home lights styay on for. This can also be set through the larger MFD if
you have the bluetooth option.
Module 09 - Cent. Elects.
Adaptation
Ch.01
Set a value between 10 and 60 seconds, must be in 10s.
So during the
day i drive with only my foglights, and during the night my normal front lights
+ tail lights.
Notes:
- Depending on the Byte 18 coding, this may result in all of the parking lights
illuminating.
- If you do not have desirable results on Halogen equipped vehicles, please
update this thread.
Fog Light behavior with High Beams
Found in Coding, Long Coding helper.
Step 1 Enable Auto Rain Closing
1. Open the Central Electronics Controller (09) and click on the Coding option.
2. Click the drop down box and choose the RegenLichtSens (RainLightSensor)
3. Note the software coding (00)208933) (most cars have different codings)
4. Convert to Hex (0)3 30 25
5. Add 4 to the left hand value Hex (0)7 30 25
6. Convert to Decimal (00)471077 and replace the old coding.
If youre unclear on the conversion steps see the Decimal to Hex and Hex to Decimal conversion guide.
Step 2 Enable Menu to Enable/Disable (optional)
1. Open the Comfort System Controller (46)
2. In long coding change Byte 09 to Hex 02
Example
13 90 06 88 51 03 48 3F 2D 04 05 8F B0 08 0A 04 88 9C 00
to
13 90 06 88 51 03 48 3F 2D 02 05 8F B0 08 0A 04 88 9C 00