Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
.1
.2
.3
Introduction
:In this practice Packet Tracer Skills Exam, you will do as follows
Addressing Table
Default
Gateway
Subnet Mask
Address
Interface
n/a
255.255.255.224
10.10.10.193
Fa0/0
n/a
255.255.255.252
10.10.10.249
S0/0/0
n/a
255.255.255.252
10.10.10.253
S0/1/0
n/a
255.255.255.252
198.133.219.18
S0/0/1
n/a
255.255.255.255
192.168.1.3
Lo0
n/a
255.255.255.192
10.10.10.129
Fa0/0
n/a
255.255.255.240
10.10.10.225
Fa0/1
n/a
255.255.255.252
10.10.10.250
S0/0/0
Device
Main
Admin
n/a
255.255.255.255
192.168.1.1
Lo0
n/a
255.255.255.128
10.10.10.1
Fa0/0
n/a
Fa0/1
BldgA
n/a
255.255.255.252
10.10.10.253
S0/0/0
n/a
255.255.255.255
192.168.1.2
Lo0
10.10.10.1
255.255.255.128
10.10.10.4
NIC
Teacher
10.10.10.1
255.255.255.128
10.10.10.5
NIC
Student
NIC
Staff
NIC
10.10.10.193
255.255.255.224
10.10.10.200
192.31.7.53
.NOTE: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class
Advertise each subnet individually in area 0 with its corresponding wildcard mask. (Main should not
advertise the link to the Internet.)
.
b. Configure OSPF authentication on the links between BldgA and Admin, Admin and Main,
.and Main and BldgA
Encrypt the updates using MD5 authentication. Authentication should be enabled for the entire
.area 0
.
Modify both sides of the link between Main and BldgA to reflect the actual bandwidth of 768 Kb/s
.
Change the priority on Admin so that it is the preferred DR for the LAN it shares with BldgA
.d. Propagate a default route in the OSPF updates
Configure a default route on Main and point it to the Internet. Use the outbound interface
.argument
.
Allow only HTTP access to the XYZ Uni Server at its public address 192.31.7.53
.
.
c. Filter traffic from the BldgA LAN. Configure and apply on the router a single ACL numbered
:175 that will limit network traffic and will implement the following policy
Hosts from the LAN connected to the Fa0/0 interface of BldgA are blocked from accessing hosts on
.the Admin Staff LAN
.
Version 1.0
Created in Packet Tracer 5.3.2.0027 and Marvel 1.0.1
All contents are Copyright 1992 - 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public
.Information
Max Points
100
.Click the button below to open the PT activity
Note: In order to view the score report, you should activate the assessment and then take it using your
.student account