Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Technical Specification
Quantity
Approx.
Cost
1 Unit
20,000/To
37,000/-
Aim: To determine the flexural rigidity (EI) of the beam and compare it with
theoretical value.
1 Unit
20,000/To
36,000/-
[Type here]
Aim: To determine the deflection of a pin jointed truss experimentally and to verify the
results theoretically and graphically.
1 Unit
20,000/To
38,000/-
4.
5.
1 Unit
20,000/To
35,000/-
20,000/To
35,000/-
[Type here]
6.
Aim: To study two hinged arch for the horizontal displacement of the roller end for a
given system of loading and to compare the same with those obtained analytically.
1Unit
20,000/To
40,000/-
1Unit
20,000/To
37,000/-
1Unit
20,000/To
40,000/-
7.
Specification: The model should have a span of 100cm and rise 25cm. Both ends
should have hinge but one of the ends should also be free to move longitudinally. A
lever arrangement may be fitted at this end for the application of known horizontal
inward force for measuring the horizontal thrust. Along the horizontal span of the arch
various points are marked at equidistant for the application of load. This being a
statically indeterminate structure of the first degree. A dial gauge with 25mm travel
(with magnetic base) should be supplied with the apparatus. Mild steel apparatus
supplied should be complete with a supporting stand and a set of weights.
Aim: To study the behavior of a portal frame under different end conditions.
Redundant Joint Apparatus
Portal Frame Apparatus
Weights
Hanger
Dial gauge
Scale
Vernier Caliper
8.
[Type here]
9.
1Unit
Apparatus
Diffused light research polariscope
Photo elastic model
Features:
Reliable
Accurate
High performance
10.
Aim: To verify the moment area theorem regarding the slopes and deflections of the
beam.
1Unit
20,000/To
36,000/-
1Unit
20,000/To
35,000/-
1Unit
20,000/To
37,000/-
11.
Specification: Apparatus should consist of a mild steel angle of size 1" x 1" x 1/8" or
in equivalent metric units of length 80cm is tied as a cantilever beam. The beam should
be fixed at one end such that the rotation of 450 intervals can be given and clamped
such that the principal axis of its cross-section may be inclined at any angle with the
horizontal and vertical planes. Also arrangement may be provided to apply vertical load
at the free end of the cantilever and to measure horizontal and vertical deflection of
the free end. A dial gauge with 25mm travel (with magnetic base) should be supplied
with the apparatus. Apparatus should be supplied complete with a supporting stand
and a set of weights.
Aim: To determine the moment required to produce a given rotation (rotational
stiffness) at one end of the beam when the other end is pinned.
20,000/To
38,000/-
Apparatus
Features:
High quality
Accurate
Precise make
12.
[Type here]
13.
1Unit
20,000/To
35,000/-
1Unit
20,000/To
36,000/-
1Unit
20,000/To
35,000/-
16.
1 Unit
25,000/-
17.
1 Unit
25,000/-
18.
1 Unit
25,000/-
19.
1 Unit
25000/-
GRAND TOTAL IN WORDS [Max. Approx. Cost] (INRs. Six lakh fifty thousand)
INRs.
6,50,000/-
[Type here]