Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Department of Education
Region V
Division of Sorsogon
: Industrial Arts
: ELECTRICAL INSTALLATION & MAINTENANCE
: Prepare electrical supplies, materials, and tools
Module Title
Date
Learning Outcomes
LO1. Identify electrical supplies, materials, and tools needed in electrical/wiring installation
LO2. Store unused / surplus electrical materials upon completion of the job
LO3. Maintain and store basic tools and equipment
A. Introduction
This module contains information and suggested learning activities on preparing construction materials and tools. It includes instruction
and procedure on preparing appropriate tools and materials needed in electrical wiring installation, storing unused and surplus electrical
materials upon completion of the job, and maintaining and storing basic tools and equipment.
This module consists of three (3) learning outcomes. Each learning outcome contains learning activities with instruction sheets.
Before you follow the instruction, read the information sheets and answer the self-check and activities provided to assess your competence
by your teacher. He/she will check if you have acquired the knowledge necessary to perform the skill portion of the particular learning
outcome.
Upon completion of this module, report to your teacher for assessment. If you pass the assessment, you will be given a certificate of
completion.
B. LEARNING ACTIVITIES
LO1. Identify electrical supplies, materials, and tools needed in electrical/wiring installation
Learning Content
Method
Presentation
Practice
Feedback
Resources
Time
1.
Self-Paced Instruction
Modular
Computer Based
Learning
Read Information
Compare your
answer key
and electrical
Info Sheet,
Answer
Sheet/Answer
7:308:30
am
Key
e-learning
materials.
software
handouts
2. Preparation of
requisition slip form
Modular
Computer Based
Learning
Modular
Computer Based
Learning
Read/perform
on the preparation
performing the
of requisition slip
requisition form.
form.
Read /Perform
on the preparation
wiring materials.
e-learning
software
handouts
e-learning
software
handouts
of wiring
materials.
LO 2. Store unused / surplus electrical materials upon completion of the job
Self-Paced Instruction
1. Proper tool storage
Read Information
Do the Self-Check 2.1.
Modular
Computer Based
Learning
Read/perform Activity
storage.
tools.
Activity Sheet,
7:30-8:30
2.1
presentation
am
handouts
Evaluate with
electrical Tools,
Performance Criteria
wires,
Checklist 2.1
Evaluate with
Performance Criteria
Checklist 2.2
Prepare a table
in an inventory form of
electrical materials.
detail of performing
the inventory form.
Modular
Computer Based
Learning
Sheet
Compare your
3.1
about
lubrication of pliers.
Read /Perform Activity
d)
B. Demonstration with Oral Questioning / Interview
C. Teachers Self-Reflection of the Session
Evaluate with
Performance Criteria
Checklist 3.1
Evaluate with
Performance Criteria
equipment.
c. Assessment Plan
answer key
Checklist 3.2
Activity Sheet,
7:30-8:30
presentation
am
handouts
electrical Tools,
and materials
Prepared by:
EFREN G. GAYANES
Teacher I
ASSESSMENT CRITERIA:
1. Materials, tools, and instruments are prepared in accordance with the
job requirements.
2. Functionality of fluorescent lighting fixtures is checked and tested in
accordance with the plan specifications.
3. Fluorescent lighting fixtures are installed in line with the job
requirements.
4. Switching control is applied in accordance with the work plan.
5. Workplace is cleaned and made safe upon completion of the job.
CONTENTS:
Preparation of materials, tools and instruments
Application of switches in controlling lights
Procedures of mounting/installing of recessed/surfaced fluorescent
lighting fixtures
CONDITIONS:
The following resources are needed:
Tools
linemans pliers
long nose pliers
Philips
screwdriver
flat screwdriver
gimlet
hammer
metric rule
level bar
try square
METHODOLOGIES:
Group Discussion
Demonstration
ASSESSMENT METHODS:
Supplies and
Materials
electrical tape
switches
fluorescent
fixtures
wires
Learning
Materials
learning
elements
books
manuals
wiring plan
Equipment
Supplies
wiring booth
multi-tester
Personal
Protective
Equipment
(PPE)
Demonstration
Written test
Supplies and
Materials
electrical tape
ballasts
fluorescent tube
fluorescent lamp
holder
starter
starter holder
wires
fluorescent frame
Learning Materials
learning elements
drawing plan
books, manuals,
and catalogs
Philippine
Electrical Code
Equipment
simulated work
place or actual
work place
METHODOLOGIES:
multi-tester
Personal Protective
Equipment (PPE
ASSESSMENT METHODS:
Group Discussion
Demonstration
Demonstration
Written test
:
:
:
:
Industrial Arts
ELECTRICAL INSTALLATION & MAINTENANCE
Install electrical lighting systems on auxiliary outlets and lighting fixtures
Installing electrical lighting systems on auxiliary outlets and lighting fixtures
Involve/
Facilities
Venue
Date/Time
Trainee
A. Preliminaries:
- Prayer
- Recap of the
-
activity
Unfreezing Activity
B. Activities:
12/17/2014
Teacher/
All
trainees
Contextual
Laptop, Module
Learning
Area
8:00-8:10
Remarks
Group
Module/Informatio
Learning
n Sheet 5.1-1
Resource
Pilikitot
Self Check
Area
Duday
Group
Simulation
1 set Fluorescent
Area
8:10-9:00
8:10-9:00
Group
Projector
Laboratory
Video Presentation
Computer
8:10-9:00
Self-Check
Group
Practical
CFL, Receptacle,
Work Area
Junction box,
( Station # 5)
throw) switch
8:10-9:00
Advance
Conduits
Job Sheet 6.1-1
Institutional
8:10-9:00
Students
CFL, Receptacle,
Junction box,
Utility Box, CB,
wires, Pliers, Screw
Drivers, Electrical
Tape, Tester,
Conduits
Assessment
Area