Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version
1.1
2013.08.06
.1
Overview
8 in 1 full-function professional HD Audio Video Encoder newly developed by Hongtushixun with
multiplexer function. It comes with 8 HDMI Video or 8HD-SDI inputs(optional); Video supports
MPEG-2 and H.264 Encoding format with higher encoding compression efficiency and excellent
video quality; Audio supports MPEG-1 Audio Layer2LC-AAC, HE-AAC encoding format. In
additional to the encoding function to 8 HDMI Audio Video signals, at the same time 1ASI input
and 1IP input(optional, IP output is included) are available to MPTS output together with existed
TS stream from encoding after they are multiplexed. It comes with 1group ASI multiplexing
output(2 routes) and 1IP output port(optional, IP input is including), IP output supports 16 routes
SPTS or 1MPTS output. IP and ASI stream output(consistent or inconsistent) is independent.
You can choose H.264 encoding or MPEG-2 encoding for different input. In the H.264 encoding
mode, each input can simultaneously output two streams with different resolution for different
network requirements.
Its higher integration and versatile design can effectively reduce cost of digital TV system. It can
be widely used in different digital TV head-end system, Digital Terrestrial and IPTV digital TV
systems.
.2
Functions
Support MPEG-2 and H.264 Video Encoding
Support MPEG-1 Layer 2,LC-AAC or HE-AAC Audio Encoding
Support PALNTSC video format
Support supper lower bit rate encoding
Support edit and insert PSI/SI
Support VBR and CBR video encoding mode
IP and ASI stream output(consistent or inconsistent) is independent
Support IP output with 1MPTS or 16 SPTS
In the H.264 encoding mode, each input can simultaneously output two streams with different
resolution for different network requirements.
Support real time monitoring output bit rate.
Support Web Management
High reliability design, stable operation, high performance and low cost
1U Standard case unit
.3
Technical indicators
8 HDMI inputs8 HD-SDI inputs(BNC interface)
Input
Optional
Optionalincluding IP
output
Audio Encoding
Format
Audio Sampling
Encoding rate
Video encoding
rate
Video encoding
mode
Audio encoding
rate
MPEG-2:CBRVBR
AAC
96/112/128/160/192/224/256/320/384Kbps
MPEG-1 Audio Layer 2:
192/224/256/320/384Kbps
PSI/SI Inset
108Mbps(BNC-J12(75 Ohm)interface)
Multiplexing
IP Packages
1-7
Function
IP Package format 188 204
MTU
Max 1500
Interface
Package quantity
Package format
188
Interface
Rj45 10/100M
Management
Language
Interface
Management
function
.4
Size(LxWxH)
483mm44mm500mm
Weight
4kg
Temperature
0~45(working), -20~80reserving
Power
Power
Consumption
25W
CH
ENCODER
1
12
ASI IN
POWER
IP IN
ALARM
1
IP IN
ASI
15
14
13
12
HDMI 8
HDMI 7
HDMI 6
HDMI 5
HDMI 4
HDMI 3
HDMI 2
HDMI 1
11
10
AC110V-220V-50/60Hz
NMS
RST
IP OUT
ASI IN OUT
16 17 18 19
Reset button
GE input/output interface
16 Power switch
18 Power Jack
19 Ground terminal
.1
Acquisition Check
When user open the package of the device, it is necessary to check the packaging materials of
widgets, check items in the package according to packing list or the following items:
8 in 1 full function HD encoder
1
User Manual
1
AC input power plug wire
1
If any item is missing or mismatches with the list above, please contact the company
immediately.
.2
Installation Preparation
When user install the device, please follow the following steps,The details of installation will be
described at the rest part of this chapter, user can also refer to the rear panel chart, this chapter
mainly include the following content.
Checking the possible device missing or damage during the transportation.
Preparing relevant environment for installation.
Installing Encoder.
Connecting signal wires.
Connecting communication port(optional).
2.2.1 Devices Installation Flow Chart illustrated as follows
Acquisition
Check
Fixing
Device
Connecting
Grouding
Wire and
Power
Cord
Connecting
Signal Wire
Setting
Parameter
Running
Device
Items
When the devices are installed in several rows in the device room,their
Installation space distance should be between 1.2~1.5m, and the distance to the wall should
be no less than 0.8m.
No conduction, and no dusting Mass resistivity of the antistatic flooring: 1X
Floor of the
107~1X1010, Grounding current limiting resistance: 1M. Floor bearing:
2
equipment room
more than 450Kg/m
Environment
Temperature
Relative
temperature
Pressure
Machine rooms
window & door
Machine rooms
wall
Fire prevention
Power supply
.3
.4
.5
.1
.2
.3
10
.4
11
12
Enable.
IP Output Settings TS over IP module settingsnetwork management interface as
shown in Figre10.
.5
13
Encoding channel Mux setting network management interface has two main functions: 1 set
whereabouts encoding channels program, select 002 multiplex to IP output channels, select OFF,
not to be multiplexed output. 2 display encoding channels detailed program information, such
as TS ID, original network ID PMT PID PCR PID elementary stream video PID
elementary stream video PID PAT\CAT\SDT version conditional access system(EMM)
program type and the program providers information. And this information can only be viewed.
Please go to the output program main item when need to modify the program.
There are eight encoding channels, each channel has the same Mux setting network
management interface,1 encoding channel Mux setting network management interface as shown
figure 11.
14
3.5.3 "Output Program Edit" under the main item "NIT Edit" NIT editing interface
Click on "Output Program Edit" button. Enter Respectively "NIT Edit" "ASI Output Edit" ,
"IP Output Edit" 3 small items network management interface.
Click on "NIT Edit" button, you can enter the "Network information Edit" NIT table network
interface.
The NIT editor NMS interface has three main functions: 1 add directly, " Network ID, " Network
Name", " NIT version number" , NIT replace selection switch (ASI input stream NIT or self-edited
NIT) . 2 In the NIT description box may edit(currently only add DVB-C system, could be
upgraded later) TS ID, ON ID, frequency, modulation mode, symbol rate, FEC lnner, FEC outer7
items content, each NIT editor Upon completion, the hook inside the small box behind already
exist, such as the need NIT delete a message, click on the hook behind the small box inside it,
and click "Submit" to delete. 3, support program reuse and may choose to delete a set of
program (input program choices after reuse has box here, such as the need to remove the set of
programs, click the check, become effective after submission). 4, click the drop-down list on
each program can be edited detailed information of each program, here both ASI input channel
and coding input channels are the same.
15
16
.6
Device Network Parameters Edit User Management four small item network
management interface.
3.6.1 System Settingsinterface
Click on System Settingswill appear System Settingsnetwork management interface.
System setting network interface main functions as below:1 the date/time of acquisition and
submit .2parameter guide in/guide out. 3system upgrade.
System setting network management interface as shown in Figure 16.
18
20