Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Institutional Cleaning
Formulary 2010
Table of Contents
I. Hard Surface Cleaners
A. All-Purpose
Concentrates
S-100
I-104
C-200
S-111
C-201
C-202
C-203
C-204
S-102
I-108
C-300
Page
Alkaline Glycol Ether Cleaner
Anionic/Nonionic Heavy Duty Cleaner
Anionic/Nonionic Concentrate
d-Limonene Hard Surface Cleaner and Degreaser
General Purpose ConcentratePhosphate
General Purpose ConcentrateNon-Phosphate
Non-Phosphate Premium ConcentrateHard Water
Non-Phosphate Premium ConcentrateLower pH
Sodium Metasilicate Glycol Ether Cleaner
Solvent-Free Alkaline Cleaner
Solvent-Free Hard Surface Concentrate
1
1
1
2
2
2
3
3
3
4
4
5
5
5
6
6
6
6
7
7
7
Degreasers
D-200
D-201
D-202
NP-101
D-300
D-301
D-302
D-303
D-304
S-105
Solvent Cleaners
S-204
S-300
S-301
S-120
S-104
S-112
S-200
S-201
S-202
S-203
d-Limonene Cleaner
Blooming d-Limonene Microemulsion
Clear Diluting d-Limonene Microemulsion
Dipentene Microemulsions
Graffiti Remover
Kerosene Emulsion Cleaner
Pine Oil CleanerPremium
Pine Oil CleanerStandard
Solvent Degreaser, Flush-Off TypePremium
Solvent Degreaser, Flush-Off TypeStandard
8
8
8
9
9
9
10
10
10
11
All-Purpose Spray-and-Wipe
Biodegradable and Solvent-Free Hard Surface Cleaner
Biodegradable and Solvent-Free Multi-Surface Spray-and-Wipe
Light-Duty Neutral Cleaner
Leather, Vinyl and Plastic Cleaner
Ready-to-Use Hard Surface Cleaner
Ready-to-Use Multi-Surface Cleaner
Soy-Based All-Purpose Cleaner
12
12
12
12
13
13
13
13
Table of Contents
B. Industrial
Dairy Cleaners
F-200
F-300
F-301
Page
Dairy Farm Acid Cleaner
Dairy Alkaline Cleaner
Foaming Acidic Dairy Cleaner
14
14
14
Bottle Wash
General Food Industry Cleaner
Food Service Degreasers
High-Foaming Smokehouse Cleaner
Oven CleanerPremium
Oven CleanerStandard
Meat Processing Cleaner
Solvent-Free Food Industry Degreaser
15
15
15
16
16
16
17
17
18
18
18
19
19
19
20
20
20
21
21
21
21
22
22
22
23
23
23
Low-Foam Cleaners
LF-111
LF-115
LF-107
Metal Cleaners
I-101
M-200
M-201
M-202
LF-114
M-300
M-301
M-302
M-303
M-203
A-102, A-103
M-204
I-113
S-113
I-102
M-205
24
24
24
25
25
26
26
26
Rust Removers
M-206
Steam Cleaners
I-105
I-109
I-114
IIII
Table of Contents
C. Institutional
Acid Cleaners
A-113
A-110
A-106
A-104
A-115
A-111
A-105
A-112
Page
Thickened Acetic Acid Cleaners
Thickened Formic Acid Cleaner
Viscous Hydrochloric/Phosphoric Acid Cleaner
Viscous Organic Acid Cleaners
Thickened Oxalic Acid Cleaner
Concentrated Phosphoric Acid Cleaners
Viscous Phosphoric Acid Cleaner
Viscous Sulfamic Acid Cleaners
27
27
27
28
28
28
29
29
30
30
30
30
31
31
31
32
32
32
32
33
33
33
34
34
34
35
35
35
36
36
37
37
37
37
Bathroom Cleaners
B-102
I-300
A-114
A-109
B-101
I-301
B-100
Dishwash
I-302
I-303
I-304
D-102
I-200
D-104
D-103
Floor Cleaners
I-201
LF-112
LF-106
LF-110
LF-109
I-107
I-202
LF-113
Glass Cleaners
I-305
I-306
I-307
I-308
Carpet Antistat
Carpet Prespotter
Carpet Steam Cleaner
Dry Brittle Liquid Cleaner
Low-Foam Carpet Cleaner
Rug and Upholstery Shampoo
III
38
38
38
39
39
39
Table of Contents
Wall and Tile Cleaners
I-206
I-207
Page
Wall and Tile Concentrate
Wall and Tile Spray Cleaner
40
40
41
41
41
42
42
42
42
43
43
43
44
44
44
45
45
46
46
47
47
B. Powders
L-313
L-314
L-315
L-316
L-317
L-318
III. Miscellaneous
A. Foam Markers
V-200
V-201
48
48
The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein are based on tests and data which we believe to be
reliable, but the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto.
IV
All-Purpose Concentrates
Formula S-100
COMPONENT
Soft water
Ethylenediamine tetraacetic acid, tetrasodium salt (40%)
Sodium gluconate
42Sodium silicate 3.22/1
Potassium hydroxide (45%)
Ethylene glycol butyl ether
Tomamine Alkali Surfactant
Tomadol 91-8 surfactant
pH
Specific gravity, 20/20 C
APPLICATIONS
Hard surface cleaner. Grill cleaner. Engine degreaser.
WT %
66.0
1.0
1.0
10.0
10.0
5.0
5.0
2.0
>13
1.17
MIXING INSTRUCTIONS
Add ethylenediamine tetraacetic acid, tetrasodium salt to water
and mix well.
Add sodium gluconate and mix well.
Add sodium silicate and mix well.
Add potassium hydroxide and mix well.
Add ethylene glycol butyl ether and mix well.
Add Tomamine Alkali Surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
USE DILUTION
12:1 to 30:1
Formula I-104
WT %
80.0
0.5
5.0
3.0
3.0
3.5
2.0
3.0
13.9
1.06
MIXING INSTRUCTIONS
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix
well to dissolve.
Add potassium hydroxide and mix well.
Add tetrapotassium pyrophosphate and mix well.
Add potassium silicate and mix well.
Add dodecylbenzene sulfonic acid and mix well.
Add Tomadol 91-8 or Tomadol 900 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
10:1 to 30:1
Anionic/Nonionic Concentrate
Component
Water
Tomadol 23-6.5 surfactant
C12 LAS (60%)*
Sodium carbonate
Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis)**
Tomamine Alkali Surfactant
Formula C-200
WT %
78.9
4.8
3.3
4
6
3
Mixing Instructions
Add Tomadol 23-6.5 surfactant to water and mix well.
Add linear dodecylbenzene sulfonate (60%) and mix until dissolved.
Add sodium carbonate and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomamine Alkali Surfactant and mix until homogeneous.
Add dye and fragrance as desired.
All-Purpose Concentrates
Formula S-111
WT %
7.0
3.0
2.0
2.0
3.0
77.0
5.0
1.0
10.6
1.01
Mixing Instructions
Add d-limonene to Tomamine E-14-5 surfactant and mix well.
Add Tomamine AO-14-2 surfactant and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add and mix water slowly until homogeneous.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
10:1 to 50:1
Formula C-201
WT %
Water
Tomadol 91-6 surfactant
Tomadol 91-2.5 surfactant
Sodium metasilicate, pentahydrate
Trisodium phosphate, anhydrous
Phosphate ester*
Mixing Instructions
77.5
2.0
2.0
8.3
3.2
7.0
8
13.2
150
USE DILUTIONS
Heavy-duty use: 10:1
Regular-duty use: 16:1
Light-duty use: 32:1
Formula C-202
WT %
78.3
2.8
1.2
11.1
Baypure CX 100*
1.6
5.0
Mixing Instructions
Add Tomadol 91-6 and Tomadol 91-2.5 surfactant to water and mix well.
Add sodium metasilicate, pentahydrate and mix vigorously until
dissolved.
Add tetrasodium iminodisuccinate and mix vigorously until dissolved.
Add Tomamine Alkali Surfactant and mix well until homogeneous.
Add dye and fragrance as desired.
8
13.2
135
USE DILUTIONS:
Heavy-duty use: 10:1
Regular-duty use: 16:1
Light-duty use: 32:1
All-Purpose Concentrates
WT %
Formula C-203
Mixing Instructions
Water
57.8
Tomadol 91-6 surfactant
7.0
Sodium metasilicate, pentahydrate
14.6
Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis)
12.6
Dicarboxylic organic acid*
8.0
*Westvaco Diacid1550, MeadWestvaco Corporation, or equivalent product.
Viscosity @ 73 F, cps
13
pH
13.3
Phase coalescence temperature, F
158
APPLICATIONS
Hard surface cleaner designed for hard water.
USE DILUTION
Heavy-duty use: 32:1
Regular-duty use: 64:1
Formula C-204
WT %
79.3
4.0
5.0
1.7
3.5
1.5
5.0
Mixing Instructions
Add Tomadol 1-5 surfactant to water and mix well.
Add sodium xylene sulfonate and mix well until homogeneous.
Add ethylene glycol monobutyl ether and mix well.
Add sodium lauryl ether sulfate (3EO), ethylenediamine tetraacetic acid,
tetrasodium salt and sodium sesquicarbonate, and mix until dissolved.
Add dye and fragrance as desired.
10.3
160
Formula S-102
WT %
83.0
5.0
2.0
5.0
3.0
2.0
12.5
1.04
Mixing Instructions
Add sodium metasilicate, pentahydrate to water and mix well.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add ethylene glycol butyl ether and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well until homogeneous.
USE DILUTION
10:1 to 30:1
All-Purpose Concentrates
Formula I-108
WT %
Mixing Instructions
79.0
3.0
3.0
10.0
2.0
3.0
14
1.08
USE DILUTION
10:1 to 30:1
Formula C-300
WT %
73.0
2.0
7.0
3.0
10.0
5.0
Mixing Instructions
Add trisodium phosphate to water and mix until dissolved.
Add sodium metasilicate pentahydrate and mix until dissolved.
Slowly add sodium hydroxide and mix well.
Add Tomadol 900 surfactant and mix until dissolved.
Add phosphate ester and mix well.
All-Purpose Degreasers
Formula D-200
WT %
59.7
5.0
5.0
7.5
12.0
10.8
Mixing Instructions
Add Tomadol 91-6 and Tomadol 91-2.5 surfactant to water, and mix
until dissolved.
Add Tomamine Amphoteric 400 surfactant and mix until dissolved.
Add sodium metasilicate, pentahydrate and ethylenediamine tetraacetic
acid, tetrasodium salt and mix well until homogeneous.
Add dye and fragrance as desired.
*The combination of Tomadol 91-6 and Tomadol 91-2.5 surfactants can be replaced with Tomadol 1-5 surfactant.
pH
13.4
Phase coalescence temperature, F
>140
APPLICATIONS
USE DILUTION
Hard surface cleaning in hard water.
Heavy-duty use: 32:1
Regular-duty use: 64:1
Formula D-201
WT %
81.5
6.0
6.5
3.0
3.0
Mixing Instructions
Add Tomadol 1-5 surfactant to water and mix well.
Add Tomamine Alkali Surfactant and mix well.
Add sodium metasilicate, pentahydrate and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix with
vigorous stirring until homogeneous.
Add dye and fragrance as desired.
12.9
140
USE DILUTION
Heavy-duty use: 32:1
Regular-duty use: 64:1
Formula D-202
WT %
Mixing Instructions
69.2
3.0
3.0
7.5
12.5
4.8
Add Tomadol 91-6 and Tomadol 91-2.5 surfactants to water and mix
until dissolved.
Add Tomamine Alkali Surfactant and mix well.
Add sodium metasilicate, pentahydrate and mix well.
Add tetrasodium iminodisuccinate and mix well.
13
13.2
165
USE DILUTION
Heavy-duty use: 10:1
Regular-duty use: 32:1
Light-duty use: 64:1
All-Purpose Degreasers
Heavy-Duty Degreaser
Formula NP-101
Component
WT %
Mixing Instructions
Soft water
81.5
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Sodium metasilicate pentahydrate
2.0
Add sodium nitrilo-triacetate (40%) and mix well.
Sodium nitrilo-triacetate (40%)
1.0
Add sodium hydroxide (50%) and mix well.
Sodium hydroxide (50%)
9.5
Add Tomamine AO-14-2 surfactant and mix well.
Tomamine AO-14-2 surfactant
1.5
Add Tomamine Q-17-2 surfactant and mix well.
Tomamine Q-17-2 surfactant
1.5
Add Tomadol 91-8 surfactant and mix well until homogeneous.
Tomadol 91-8 surfactant
3.0
pH
>13
Specific gravity 20/20 C
1.07
APPLICATIONS
USE DILUTION
Hard surface cleaner.
5:1 to 30:1
NOTE: For extremely hard water, add 1%2% ethylenediamine tetraacetic acid, tetrasodium salt (40%)
Formula D-300
WT %
Mixing Instructions
79.5
8.0
6.0
6.0
0.5
Formula D-301
WT %
88.0
3.0
1.0
6.0
2.0
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Add sodium tripolyphosphate and mix until dissolved.
Add Tomadyne 106 surfactant and mix well.
Add Tomamine AO-455 surfactant and mix well.
Non-Phosphate Degreaser
Component
Water
Sodium metasilicate pentahydrate
Sodium xylene sulfonate (40%)
Tomadol 901 surfactant
APPLICATIONS
Hard surface degreaser.
Formula D-302
WT %
Mixing Instructions
85.0
5.0
4.0
6.0
All-Purpose Degreasers
Ready-to-Use Degreaser
Component
Water
Sodium metasilicate pentahydrate
Potassium hydroxide (45%)
Ethylene glycol monobutyl ether
Tomadyne 100 surfactant
APPLICATIONS
Hard surface degreaser.
Formula D-303
WT %
Mixing Instructions
91.0
2.0
2.0
2.0
3.0
Formula D-304
WT %
67.5
12.0
2.5
6.5
7.5
4.0
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Add citric acid and mix well.
Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix well.
Add sodium xylene sulfonate (40%) and mix well.
Formula S-105
WT %
Mixing Instructions
Mineral spirits
75.0
Add Tomamine Q-14-2 surfactant to mineral spirits and mix well.
Tomamine Q-14-2 surfactant
2.0
Add Tomadol 91-8 surfactant and mix well.
Tomadol 91-8 surfactant
6.0
Add Tomamine E-17-2 surfactant and mix well.
Tomamine E-17-2 surfactant
7.0
Add and mix soft water slowly until homogeneous.
Soft water
10.0
Specific gravity, 20/20 C
0.83
pH
8.6
APPLICATIONS
Viscous cleaner for better cling. Hard surface cleaner for heavy greases. Paint and varnish stripper.
d-Limonene Cleaner
Component
d-Limonene
Sodium lauryl ether sulfate (60%)*
Tomadol 25-3 surfactant
Tomadol 25-7 surfactant
Fatty acid diethanolamide**
*Calfoam ES-603, Pilot Chemical Company, or equivalent product.
**Calamide C, Pilot Chemical Company, or equivalent product.
Viscosity @ 73 F, cps
Phase coalescence temperature, F
APPLICATIONS
Hard surface cleaner.
Formula S-204
WT %
50.0
24.0
10.0
6.0
10.0
Mixing Instructions
Add sodium lauryl ether sulfate to d-limonene and mix well.
Add Tomadol 25-3 and Tomadol 25-7 surfactants and mix until
dissolved.
Add fatty acid diethanolamide and and mix well until homogeneous.
15
>165
USE DILUTION
Heavy-duty use: 16:1
Regular-duty use: 32:1
Light-duty use: 64:1
Formula S-300
WT %
15.7
7.9
2.3
30
44.1
Mixing Instructions
Blend Tomamine E-14-5 and Tomamine E-17-5 surfactants with
Tomamine Alkali Surfactant.
Add d-limonene and mix well until homogeneous.
Slowly add water while agitating until homogeneous.
USE DILUTION
6:1 to 32:1
Formula S-301
WT %
24.0
12.1
3.6
30.0
30.3
Mixing Instructions
Blend Tomamine E-14-5 and Tomamine E-17-5 surfactants and
Tomamine Alkali Surfactant and mix well until homogeneous.
Add d-limonene and mix well until homogeneous.
Slowly add water while agitating.
USE DILUTION
8:1 to 48:1
Dipentene Microemulsions
Formula S-120
A
B
C
WT % WT % WT %
5.0 10.0 20.0
6.4
8.8 14.4
0.8
1.1
1.8
0.8
1.1
1.8
87.0 79.0 62.0
11
11
19
38
50
41
1.6
1.1
0.9
Component
Mixing Instructions
Dipentene 122
Add Tomamine E-14-5 surfactant to dipentene 122 and mix until
dissolved.
Tomamine E-14-5 surfactant
Add Tomamine E-14-2 surfactant and Tomamine Alkali Surfactant,
Tomamine E-14-2 surfactant
and mix well.
Tomamine Alkali Surfactant
Add and mix water slowly until homogeneous.
Water
Low temperature cloud point, C
High temperature cloud point, C
Emulsifier/dipentene ratio
APPLICATIONS
Solvent cleaner.
NOTE: Formulations should stay clear in the range between the cloud point temperatures given. Outside of that temperature range, they will haze and
may separate. They will become clear and homogeneous again when returned to the temperature range of clarity.
Graffiti Remover
Formula S-104
Component
Soft water
Potassium hydroxide (45%)
Sodium gluconate
Tomamine Alkali Surfactant
Isopropanol, acetone or methanol
Dipropylene glycol methyl ether
WT %
28.0
50.0
2.0
10.0
5.0
5.0
pH
Specific gravity 20/20 C
APPLICATIONS
Effective on most paints and inks.
>13
1.22
Mixing Instructions
Add potassium hydroxide to water and mix well.
Add sodium gluconate and mix well.
Add Tomamine Alkali Surfactant and mix well.
Add isopropanol or alternate solvent and mix well.
Add dipropylene glycol methyl ether and mix well until homogeneous.
USE DILUTION
10:1 to 20:1
Formula S-112
WT %
35.0
14.0
3.0
3.0
45.0
0.92
9.3
Mixing Instructions
Add Tomamine E-14-2 surfactant to kerosene and mix well.
Add Tomamine Q-14-2 surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add water very slowly and mix well.
Formula S-200
WT %
20.0
4.7
8.0
11.0
4.7
51.6
Mixing Instructions
Add Tomadol 91-8 or Tomadol 900 surfactant to pine oil and mix until
dissolved.
Add linear alkylbenzene sulfonic acid and mix well.
Add isopropyl alcohol and mix well.
Add triethanolamine and mix well.
Slowly add water and mix well until homogeneous.
Add dye and fragrance as desired.
16
10.7
>158
Formula S-201
WT %
10.0
4.7
8.0
8.0
2.0
67.3
Mixing Instructions
Add Tomadol 91-8 or Tomadol 900 surfactant to pine oil and mix until
dissolved.
Add linear alkylbenzene sulfonic acid and mix well.
Add isopropyl alcohol and mix well.
Add triethanolamine and mix well.
Slowly add water and mix well until homogeneous.
Add dye and fragrance as desired.
15
10.3
>158
Formula S-202
WT %
10.0
5.0
5.0
79.0
1.0
6
>176
10
Mixing Instructions
Blend together Tomadol 91-8, Tomadol 91-2.5 and Tomadol 25-3
surfactants.
Add SHELLSOL OMS or mineral spirits and mix well until homogeneous.
Add water and mix vigorously until homogeneous.
Formula S-203
WT %
15.0
5.0
60.0
18.0
2.0
8
>176
11
Mixing Instructions
Blend together Tomadol 91-6 and Tomadol 91-2.5 surfactants.
Add SHELLSOL OMS or mineral spirits and mix well.
Add ethylene glycol monobutyl ether and mix well until homogeneous.
Add water and mix vigorously until homogeneous.
All-Purpose Spray-and-Wipe
Component
Water
Sodium tripolyphosphate
Sodium metasilicate, pentahydrate
Ethylenediamine tetraacetic acid, tetrasodium salt
Tomadol 91-6 or Tomadol 900 surfactant
Tomamine Alkali Surfactant
Ethylene glycol monobutyl ether
Viscosity @ 73 F, cps
pH
Phase coalescence temperature, F
APPLICATIONS
Spray-and-wipe hard surface cleaner.
Formula R-200
WT %
87.5
2.0
2.0
0.5
3.0
2.0
3.0
Mixing Instructions
Add sodium tripolyphosphate and sodium metasilicate, pentahydrate to
water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomadol 91-8 or Tomadol 900 surfactant and Tomamine Alkali
Surfactant, and mix well until homogeneous.
Add ethylene glycol monobutyl ether and mix well.
Add dye and fragrance as desired.
5
13
142
WT %
92.50
2.25
3.25
2.00
12.0
Formula R-300
Mixing Instructions
Add sodium citrate to water and mix until dissolved.
Add sodium carbonate and mix until dissolved.
Add Tomadol 900 surfactant and mix well.
USE DILUTION
As-is
WT %
98.0
0.5
0.7
0.8
11.5
USE DILUTION
As-is
Formula R-301
Mixing Instructions
Add sodium citrate to water and mix until dissolved.
Add sodium carbonate and mix until dissolved.
Add Tomadol 900 surfactant and mix well.
Formula I-110
WT %
95.0
1.0
1.0
3.0
1.0
7.6
Mixing Instructions
Add Tomamine AO-14-2 surfactant to water and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
USE DILUTION
As-is to 10:1
12
Formula R-201
WT %
80.5
10.0
6.0
1.0
2.5
Mixing Instructions
Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix until
dissolved.
Add ethylene glycol monobutyl ether and mix well.
Add amyl acetate and isopropyl alcohol, mix well until homogeneous.
8
5.2
119
Formula R-302
WT %
97.0
0.5
1.0
0.5
1.0
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well.
Add ethylene glycol monobutyl ether and mix well.
Add Tomadyne 100 surfactant and mix well.
USE DILUTION
As-is
Formula R-303
WT %
92.4
3.0
0.6
1.0
3.0
Mixing Instructions
Add Baypure CX 100 to water and mix well.
Add glycolic acid and mix well.
Add Tomadol 901 surfactant and mix well.
Add dipropylene glycol n-butyl ether and mix well.
Formula R-304
WT %
96.0
0.5
3.0
0.5
Mixing Instructions
Add sodium citrate to water and mix well.
Add Tomadol 900 surfactant and mix well.
Add SoyGold 1000 and mix well.
USE DILUTION
As-is
13
Formula F-200
WT %
36.7
1.0
2.0
3.0
57.3
1.0
>165
Mixing Instructions
Add Tomadol 25-3 and Tomadol 25-12 surfactants to water and mix
until dissolved.
Add ethylene glycol monobutyl ether and mix well.
Add phosphoric acid (85%) and and mix well until homogeneous.
USE DILUTION
0.252.00 ounces/gallon
Formula F-300
WT %
73.5
7.0
3.0
3.5
3.0
5.0
5.0
Mixing Instructions
Add tetrapotassium pyrophosphate to water and mix until dissolved.
Add Kasil 6 potassium silicate and mix until dissolved.
Add sodium hydroxide and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
Add ethylene glycol monobutyl ether and mix well.
Add Tomadol 23-6.5 surfactant and mix well.
Formula F-301
WT %
39.0
14.0
42.0
5.0
14
Mixing Instructions
Add monosodium phosphate to water and mix well.
Slowly add phosphoric acid, mix well and cool.
Add Tomamine Amphoteric SC surfactant or Tomamine Alkali Surfactant
and mix well.
Bottle Wash
Formula F-201
Component
Water
Tomadol 25-12 surfactant
Sodium gluconate
Sodium hydroxide (50%)
Phosphate ester*
Phosphonic acid**
WT %
70.5
1.0
2.0
18.0
8.0
0.5
Mixing Instructions
Add Tomadol 25-12 surfactant to water and mix until dissolved.
Add sodium gluconate and and mix well.
Add sodium hydroxide (50%) and mix well.
Add phosphate ester* and mix well.
Add phosphonic acid** and mix well until homogeneous.
Add dye and fragrance as desired.
Formula F-202
Component
Water
Tomadol 23-6.5 surfactant
C12 LAS (60%)*
Sodium metasilicate, pentahydrate
Tetrapotassium pyrophosphate
Tomamine Alkali Surfactant
Ethylene glycol monobutyl ether
*Calsoft L-60 Slurry, Pilot Chemical Company, or equivalent product.
Viscosity @ 73 F, cps
pH
Phase coalescence temperature, F
APPLICATIONS
Hard surface cleaner.
WT %
78.8
5.0
5.0
3.0
2.0
1.2
5.0
Mixing Instructions
Add Tomadol 23-6.5 surfactant to water and mix until dissolved.
Add linear sodium alkylbenzene sulfonate, sodium metasilicate,
pentahydrate and tetrapotassium pyrophosphate and mix until dissolved.
Add Tomamine Alkali Surfactant and mix well.
Add ethylene glycol monobutyl ether and mix well until homogeneous.
Add dye and fragrance as desired.
4
13.1
>165
USE DILUTION
12 ounces/gallon
Formula S-116
A
B
WT % WT %
71.5 66.5
6.0
6.0
5.0
5.0
6.0
4.0
10.0
1.0
1.0
3.0
3.0
3.5
8.5
>13
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix
until dissolved.
Add sodium orthosilicate and mix well.
Add Dowanol PM and Dowanol DPM or diethylene glycol butyl ether and
mix well.
Add Tomadol 25-3 and Tomadol 25-7 surfactant and mix until dissolved.
Add Tomamine Alkali Surfactant and mix well until homogeneous.
>13
USE DILUTION
2 ounces/gallon
15
Formula I-116
A
B
WT % WT %
60.7 60.4
30.0 30.0
3.0
3.0
5.6
5.3
1.0
1.0
14.0
1.17
Mixing Instructions
Add sodium hydroxide to water and mix well.
Add Tomamine AO-728 surfactant and mix well.
Add Tomamine Amphoteric N or Tomamine Amphoteric SC surfactant
and mix until dissolved.
Add Tomadol 91-8 surfactant and mix until dissolved.
14.0
1.17
USE DILUTION
5:1 to 10:1
Oven CleanerPremium
Formula F-302
Component
WT %
Water
70.17
1.11
Van Gel ES*
VANZAN xanthan gum**
0.22
Acusol 820***
1.00
Tetrapotassium pyrophosphate
1.50
Sodium metasilicate anhydrous
4.00
Sodium gluconate
0.50
Potassium hydroxide (45%)
20.00
Tomamine Alkali Surfactant
0.50
Tomamine Q-17-2 surfactant
0.50
Tomamine AO-14-2 surfactant
0.50
*Use Van Gel ES, R.T. Vanderbilt Company, Inc., or equivalent product.
**Use VANZAN xanthan gum, R.T. Vanderbilt Company, Inc., or equivalent product.
***Acusol 820, Rohm and Haas, or equivalent product.
APPLICATIONS
Oven cleaner.
Mixing Instructions
Add Van Gel ES to water and mix well.
Add VANZAN xanthan gum and mix well.
Add Acusol 820 and mix well.
Add tetrapotassium pyrophosphate and mix well.
Add sodium metasilicate anhydrous and mix well.
Add sodium gluconate and mix well.
Add potassium hydroxide and mix well.
Add Tomamine Alkali Surfactant and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
Add Tomamine AO-14-2 surfactant and mix well.
Oven CleanerStandard
Component
Water
Sodium hydroxide (50%)
Tomamine Alkali Surfactant
Tomamine Q-17-2 surfactant
APPLICATIONS
Oven cleaner.
Formula F-303
WT %
74.0
24.0
1.0
1.0
16
Mixing Instructions
Slowly add sodium hydroxide, mix and cool.
Add Tomamine Alkali Surfactant and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
Formula F-304
Component
WT %
Water
60.0
Sodium metasilicate pentahydrate
5.0
Sodium hydroxide (50%)
25.0
Tomamine AO-728 surfactant
3.0
Tomamine Amphoteric 400 surfactant
5.0
Tomamine Q-17-2 surfactant
2.0
APPLICATIONS
Removal of meat tissue and protein soils from equipment and surfaces.
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Slowly add sodium hydroxide, mix well and cool.
Add Tomamine AO-728 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
Formula F-305
WT %
68.0
7.0
6.0
7.0
3.0
9.0
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomadol 900 and Tomadol 600 surfactants and mix well.
Add sodium xylene sulfonate and mix well.
USE DILUTION
Heavy-duty use: As-is to 4:1
Regular-duty and floors: 20:1
Light-duty use: 64:1
17
Formula LF-111
A
B
WT % WT %
82.4 83.5
6.0
6.0
4.0
4.0
6.0
6.0
1.6
0.5
1.04 1.04
12.8 12.8
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and
mix until dissolved.
Add sodium metasilicate, pentahydrate and mix until dissolved.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
10 ounces/gallon
Low-Foam Concentrate
Component
Water
Potassium hydroxide (45%)
Tetrapotassium pyrophosphate
Tomamine AO-405 surfactant
Tomamine AO-455 surfactant
Tomamine Amphoteric 400 surfactant
pH
Specific gravity 20/20 F
APPLICATIONS
Pressure washing and foam-sensitive applications.
Formula LF-115
A
B
WT % WT %
55.5 54.0
20.0 20.0
15.0 15.0
5.0
5.0
4.5
6.0
14.0 14.0
1.23 1.24
USE DILUTION
110 ounces/gallon
Mixing Instructions
Add potassium hydroxide to water and mix well.
Add tetrapotassium pyrophosphate and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well until
homogeneous.
Formula LF-107
A
B
WT % WT %
79.5 79.6
12.0 12.0
5.0
5.0
2.0
2.0
1.5
1.4
14
14
1.07 1.08
18
Mixing Instructions
Add potassium hydroxide to water and mix well.
Add sodium gluconate and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well until
homogeneous.
Formula I-101
WT %
61.0
35.0
1.0
3.0
0.9
1.19
Mixing Instructions
Add phosphoric acid to water, allow to cool.
Add glycolic acid, allow to cool.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
12 ounces/gallon
Formula M-200
WT %
67.0
10.0
7.0
2.0
3.0
6.0
5.0
Mixing Instructions
Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.
Add sodium metasilicate, pentahydrate, trisodium phosphate, anhydrous,
sodium hydroxide, ethylenediamine tetraacetic acid, tetrasodium salt
and phosphate ester.
Continue with vigorous mixing until homogeneous.
12.7
28
99
USE DILUTION
12 ounces/gallon
Formula M-201
WT %
67.9
7.5
15.6
1.0
8.0
Mixing Instructions
Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.
Add sodium metasilicate, pentahydrate, ethylenediamine tetraacetic
acid, tetrasodium salt and phosphate ester.
Continue with vigorous mixing until homogeneous.
13.2
12
135
USE DILUTION
12 ounces/gallon
19
Formula M-202
WT %
69.0
7.0
6.0
3.0
7.0
8.0
13.5
77
>165
Mixing Instructions
Mix in two parts first then combine together.
Part 1: Blend water, sodium metasilicate, pentahydrate and
ethylenediamine tetraacetic acid, tetrasodium salt.
Part 2: Blend Tomadol 91-6, Tomadol 91-2.5 and Tomamine
Amphoteric 400.
Formula LF-114
A
B
WT % WT %
66.2 65.3
6.0
6.0
12.0 12.0
12.0 12.0
2.0
2.0
1.8
2.7
13.7 13.7
1.15 1.15
USE DILUTION
12 ounces/gallon
Mixing Instructions
Dissolve tetrapotassium pyrophosphate to the water and mix well.
Add potassium hydroxide and mix well.
Add potassium silicate and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
Formula M-300
WT %
93.5
1.0
2.0
2.0
1.5
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and
mix well.
Add Tomamine AO-405 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
Add Tomamine E-14-5 surfactant and mix well.
20
Formula M-301
WT %
74.0
10.0
5.0
5.0
4.5
0.5
1.0
Mixing Instructions
Slowly add sodium hydroxide to water, mix well and cool.
Add sodium silicate 3.22/1 and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomamine AO-455, Tomamine Q-14-2PG and Tomamine
Amphoteric 400 surfactants and and mix well until homogeneous.
USE DILUTION
20:1
Formula M-302
WT %
91.0
0.5
5.0
1.5
2.0
Mixing Instructions
Add sodium tripolyphosphate to water and mix well.
Add Tomadol 901 surfactant and mix well.
Add Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric SC surfactant and mix well.
Formula M-303
WT %
69.0
3.0
4.0
10.0
9.0
5.0
Mixing Instructions
Add sodium metasilicate and mix until dissolved.
Add tetrapotassium pyrophosphate and mix until dissolved.
Add ethylene glycol monobutyl ether and mix well.
Add Tomamine Amphoteric SC surfactant and mix well.
Add Tomadyne 102 surfactant and mix well.
Formula M-203
WT %
56.5
12.0
13.0
12.0
2.0
4.5
Mixing Instructions
Mix in two parts first then combine together.
Part 1: Blend water, sodium silicate, tetrapotassium pyrophosphate, and
potassium hydroxide.
Part 2: Tomadol 1-5 and Tomamine Alkali Surfactant.
13.7
3
>165
USE DILUTIONS
Heavy-duty use: 4 ounces/gallon
Regular-duty use: 2 ounces/gallon
Light-duty use: 1 ounce/gallon
21
17.0
Mixing Instructions
Tomamine Acid Foamer surfactant is a semisolid at room temperature.
Heating may be necessary.
Add Tomamine Acid Foamer surfactant to water and stir until dissolved.
This may take several minutes and it may be necessary to leave
standing overnight to ensure that it has been completely dissolved.
Add sulfuric acid, mix well, then cool.
Add ammonium bifluoride or hydrofluoric acid and mix well.
pH
3.5
3.5
APPLICATIONS
USE DILUTION
Truckwash, vertical aluminum surface cleaning.
10:1 to 30:1
NOTES: Preparation and use of a stock solution of 20% glycol ether/80% Tomamine Acid Foamer surfactant will aid in solubilization and homogeneity.
Formula M-204
Component
Water
Tomadol 91-8 surfactant
Phosphoric acid (85%)
Citric acid
Ethylene glycol monobutyl ether
Phosphonic acid*
*Dequest 2010, Thermphos International BV, or equivalent product.
pH
Viscosity @ 73 F, cps
Phase coalescence temperature, F
APPLICATIONS
Aluminum cleaner and brightener.
WT %
78.0
4.5
4.5
5.5
5.5
2.0
Mixing Instructions
Dissolve acids in water, mix well and allow to cool.
Add ethylene glycol monobutyl ether and Tomadol 91-8 surfactant.
Stir until clear solution is obtained.
1.7
5
>176
Formula I-113
A
B
WT % WT %
58.0 58.0
10.0
10.0
4.0
4.0
20.0 20.0
2.0
2.0
6.0
6.0
13.8
1.19
Mixing Instructions
Dissolve ethylenediamine tetraacetic acid, tetrasodium salt or NTA in
water.
Add potassium hydroxide to mixture, dissolve and allow to cool.
Add sodium hydroxide to mixture, dissolve and allow to cool.
Add Tomadol 91-8 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well.
13.8
1.19
USE DILUTION
5:1 to 20:1
22
Formula S-113
A
B
C
WT % WT % WT %
83.0 80.5 82.5
3.0
10.0
5.0
4.0
3.5
5.0
5.0
5.0
3.0
2.5
2.0
2.0
2.0
2.0
1.3
1.6
1.7
1.03 1.02 1.02
Component
Water
Phosphoric acid (85%)
Hydroxyacetic acid (70%)
Citric acid, anhydrous
Ethylene glycol butyl ether
Tomadol 91-8 surfactant
Tomamine Q-17-2 surfactant
pH
Specific gravity, 20/20 C
APPLICATIONS
Spray cleaner for trucks and equipment. Soak tank for equipment and parts.
Mixing Instructions
Slowly add liquid acids to water and mix well.
Dissolve citric acid and mix well.
Add ethylene glycol butyl ether and mix well, until clear
Add Tomadol 91-8 surfactant and mix well, until clear.
Add Tomamine Q-17-2 surfactant and mix well, until clear.
USE DILUTION
5:1 to 10:1
Formula I-102
WT %
48.0
2.0
2.0
20.0
20.0
3.0
5.0
13.5
1.18
Mixing Instructions
Add sodium gluconate and ethylenediamine tetraacetic acid, tetrasodium
salt to water and mix well.
Add potassium hydroxide and mix well.
Add sodium silicate and mix well.
Add Tomadol 900 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
10:1 to 30:1
Formula M-205
Component
WT %
Water
77.7
Tomadol 91-6 or Tomadol 900 surfactant
3.0
C12 LAS (60%)*
3.3
Sodium metasilicate, pentahydrate
7.0
Tetrapotassium pyrophosphate
2.0
Phosphate ester**
7.0
*Calsoft L-60 Slurry, Pilot Chemical Company, or equivalent product.
**Triton H-66, The Dow Chemical Company, or equivalent.
Viscosity @ 73 F, cps
8
pH
13.3
Phase coalescence temperature, F
>176
APPLICATIONS
Aluminum cleaner.
23
Mixing Instructions
Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.
Add linear dodecylbenzene sulfonate, sodium metasilicate, pentahydrate,
and tetrapotassium pyrophosphate and vigorously mix until
homogeneous.
Add phosphate ester and mix well.
Formula I-106
WT %
49.0
50.0
1.0
14
Mixing Instructions
Add sodium hydroxide to water, mix and cool.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
As-is
Formula I-107
WT %
84.25
5.00
2.00
1.25
2.00
5.00
0.50
13.4
1.04
Mixing Instructions
Add sodium metasilicate, pentahydrate to water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomamine Alkali Surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add monethanolamine and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
USE DILUTION
5:1 to 10:1
Paint Stripper
Component
Soft water
Ethylene glycol butyl ether
Lauryl ether sulfate, sodium salt (60%)
Sodium hydroxide (50%)
Tomamine Alkali Surfactant
pH
Specific gravity 20/20 C
APPLICATIONS
Paint remover for wood and metal surfaces.
Formula S-108
WT %
66.5
10.0
3.0
15.0
5.5
>13
1.08
Mixing Instructions
Add ethylene glycol butyl ether to water and mix well.
Add lauryl ether sulfate, sodium salt and mix until dissolved.
Add sodium hydroxide and mix well.
Add Tomamine Alkali Surfactant and mix well until homogeneous.
USE INSTRUCTIONS
Paint on with brush and remove with putty knife or steel wool.
24
Formula I-121
A
B
C
WT % WT % WT %
91
86
81
5
10
15
3
3
3
0.5
0.5
0.5
0.5
0.5
0.5
270 310
337
1410 1900 2160
5900 8900 9400
1.03 1.05 1.08
Component
Water
Sodium hydroxide (50%)
Tomamine AO-728 surfactant
Oleic acid
Tomamine Amphoteric N surfactant
Typical viscosity @ 20 C, cps (RVT #3, 100 rpm)
Typical viscosity @ 20 C, cps (RVT #3, 10 rpm)
Typical viscosity @ 20 C, cps (RVT #3, 1 rpm)
Specific gravity 20/20 C
APPLICATIONS
Spray applications to trucks and equipment. Soak tank application for
equipment and parts.
Mixing Instructions
Add sodium hydroxide (50%) to water and mix well.
Add Tomamine AO-728 surfactant and mix until dissolved.
Add oleic acid and mix well.
Add Tomamine Amphoteric N surfactant and mix well.
USE DILUTION
5:1 to 10:1
Formula M-206
WT %
79.5
2.5
14.0
4.0
5
1.0
>150
Mixing Instructions
Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.
Add phosphoric acid and mix well.
Add ethylene glycol monobutyl ether and mix well until homogeneous.
USE DILUTION
May be diluted or used as-is on NONFERROUS metals (e.g., aluminum,
zinc) at temperatures below 165 F in stainless steel tanks.
25
Formula I-105
WT %
78.0
10.0
2.0
5.0
5.0
10.4
1.1
Mixing Instructions
Add sodium tripolyphosphate to water and mix well to dissolve.
Add sodium metasilicate pentahydrate and mix well to dissolve.
Add Tomadol 91-8 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well until clear.
USE DILUTION
1 ounce/gallon
Formula I-109
Component
WT %
Mixing Instructions
Water
45.0
Add sodium metasilicate pentahydrate to water and mix well.
Sodium metasilicate pentahydrate
30.0
Add potassium hydroxide and mix well until clear.
Potassium hydroxide (45%)
10.0
Add Tomamine Alkali Surfactant and mix well.
Tomamine Alkali Surfactant
15.0
pH
14
APPLICATIONS
USE DILUTION
Industrial cleaning and degreasing.
20:1 to 50:1
NOTE: Long-term storage should be in plastic containers, as the formulation will etch glass.
Formula I-114
WT %
79.0
1.0
10.0
5.0
5.0
10.4
1.1
Mixing Instructions
Add sodium metasilicate pentahydrate to water and mix well to dissolve.
Add sodium tripolyphosphate and mix well to dissolve.
Add Tomadol 91-8 surfactant and mix well.
Add Tomamine Alkali Surfactant and mix well.
USE DILUTION
10:1 to 50:1
26
Formula A-113
A
B
WT % WT %
85.0 87.5
5.0
5.0
3.0
3.0
0.5
7.0
4.0
500
700
1.35
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Add glacial acetic acid to water and mix well.
Add Tomamine Acid Thickener and mix well.
Add Tomadol 91-2.5 surfactant and mix well.
Slowly add sodium chloride, mix well and cool.
200
200
1.36
USE DILUTION
As-is to 50:1
Formula A-110
WT %
88.4
5.0
3.0
0.6
3.0
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add formic acid to water and mix well.
Add Tomamine Acid Thickener surfactant and mix well.
Add Tomadol 91-2.5 surfactant and mix well.
Slowly add sodium chloride, mix well and cool.
350
1.03
USE DILUTION
As-is
Formula A-106
Component
Water
Phosphoric acid (75%)
Tomamine Acid Thickener surfactant
Hydrochloric acid (37%)
WT %
70.0
2.0
3.0
25.0
Viscosity @ 20 C, cps
APPLICATIONS
Toilet bowl cleaning. Vertical surface cleaning.
5200
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add phosphoric acid to water, mix well and cool.
Add Tomamine Acid Thickener surfactant and mix well.
Slowly add hydrochloric acid, mix well and cool.
USE DILUTION
As-is to 10:1
27
Formula A-104
A
B
C
WT % WT % WT %
88.00 88.00 88.00
2.50 1.25
3.00
3.00
3.00
1.25
2.50
0.30
6.00
0.20
0.30
6.00
0.20
0.30
6.00
0.20
780
560
*Use fragrance suitable for acidic media, and test for stability.
Viscosity @ 20 C, cps
820
APPLICATIONS
Toilet bowl cleaners with good cling time.
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Add citric acid to water and mix until dissolved.
Add Tomamine Acid Thickener surfactant and mix well.
Slowly add formic acid and mix well.
Add Tomadol 91-6 or Tomadol 1-7 surfactant and mix well.
Add sodium chloride and mix until dissolved.
Add fragrance and mix well.
Formula A-115
A
B
WT % WT %
90.0 90.0
5.0
5.0
3.0
3.0
0.5
2.0
1.5
Mixing Instructions
Heat and mix Tomamine Acid Thickener prior to use in order to assure
homogeneity.
Add oxalic acid to water and mix well.
Add Tomamine Acid Thickener surfactant and mix well.
Add Tomadol 91-2.5 surfactant and mix well.
Slowly add sodium xylene sulfonate mix well and cool.
USE DILUTION
As-is to 50:1
Formula A-111
A
B
WT % WT %
33.5 36.0
50.0 50.0
7.5
5.0
9.0
9.0
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add phosphoric acid to water, mix and cool.
Add Tomamine Acid Thickener surfactant and mix well.
Slowly add sodium chloride, mix well and cool.
28000 13000
1.35 1.36
USE DILUTION
As-is to 50:1
28
Formula A-105
Component
Water
Phosphoric acid (75%)
Tomamine Acid Thickener surfactant
Sodium chloride
Tomadol 91-6 surfactant
Fragrance*
WT %
77.7
12.7
4.0
5.0
0.5
0.1
*Use fragrance suitable for acidic media, and test for stability.
Viscosity @ 20 C, cps
Specific gravity 20/20 C
APPLICATIONS
Good cleaning and descaling. Good cling time.
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add phosphoric acid (75%) to water, mix well and cool.
Add Tomamine Acid Thickener surfactant and mix until dissolved.
Add sodium chloride and mix until dissolved.
Add Tomadol 91-6 surfactant and mix well until homogeneous.
Add fragrance and mix well.
6500
1.09
USE DILUTION
5:1 to 10:1
Formula A-112
A
B
WT % WT %
87.0 88.0
5.0
5.0
3.0
3.0
0.5
5.0
3.5
650
5000
1.06
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Add sulfamic acid and mix well.
Add Tomamine Acid Thickener surfactant and mix well.
Add Tomadol 91-2.5 surfactant and mix well.
Slowly add sodium chloride, mix well and cool.
685
960
1.04
USE DILUTION
As-is to 50:1
29
Formula B-102
Component
Water
Hydroxyacetic acid
Sulfamic acid
Tomamine AO-728 surfactant
pH
APPLICATIONS
Tub and tile cleaner and descaler.
WT %
80.0
5.0
5.0
10.0
1
Mixing Instructions
Add hydroxyacetic acid to water and mix well.
Add sulfamic acid and mix well.
Add Tomamine AO-728 surfactant and mix well.
USE DILUTION
As-is, or dilute to need
Formula I-300
Component
Water
Phosphoric acid (85%)
Tomadol 901 surfactant
Tomamine AO-728 surfactant
APPLICATIONS
Tub and tile cleaner.
WT %
77.0
13.0
7.0
3.0
Mixing Instructions
Slowly add phosphoric acid to water, mix and allow to cool.
Add Tomadol 901 surfactant and mix well.
Add Tomamine AO-728 surfactant and mix well.
Formula A-114
A
B
WT % WT %
88.0 89.0
5.0
5.0
3.0
3.0
0.5
1.0
3.5
2.0
690
960
1.05
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Add citric acid to water and mix well.
Add Tomamine Acid Thickener surfactant and mix well.
Add Tomadol 91-2.5 surfactant and mix well.
Slowly add sodium chloride and mix well.
400
410
1.03
USE DILUTION
As-is to 50:1
Formula A-109
Component
Water
Tomamine Acid Thickener surfactant
Hydrochloric acid (37%)
WT %
72.0
3.0
25.0
Viscosity @ 20 C, cps
pH
APPLICATIONS
Toilet bowl cleaning. Vertical surface cleaning.
5100
1.3
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Add Tomamine Acid Thickener surfactant to water and mix well.
Slowly add hydrochloric acid, mix well and cool.
USE DILUTION
As-is to 10:1
30
Formula B-101
Component
Water
Phosphoric acid (75%)
Tomadol 25-12 surfactant
Tomamine Acid Thickener surfactant
Hydrochloric acid (37%)
WT %
68.00
3.00
0.50
4.00
24.50
Viscosity @ 20 C, cps
pH
APPLICATIONS
Bowl cleaner. Ceramic tub and tile cleaner.
1750
<3
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add phosphoric acid to water and mix well.
Add Tomadol 25-12 surfactant and mix well.
Add Tomamine Acid Thickener surfactant and mix well.
Slowly add hydrochloric acid and mix well.
USE DILUTION
As-is, or dilute to need
Formula I-301
WT %
86.5
6.0
3.0
4.5
Mixing Instructions
Add citric acid to water and mix well.
Add phosphoric acid and mix well.
Add Tomadol 901 surfactant and mix well.
Formula B-100
WT %
77.7
12.7
4.0
5.0
0.5
0.1
Mixing Instructions
Heat and mix Tomamine Acid Thickener surfactant prior to use in order
to assure homogeneity.
Slowly add phosphoric acid to water and mix well.
Add Tomamine Acid Thickener surfactant and mix until dissolved.
Add sodium chloride and mix until dissolved.
Add Tomadol 25-12 surfactant and mix well.
Add fragrance and mix well.
1800
1.3
USE DILUTION
As-is
31
Institutional Dishwash
Formula I-302
WT %
82.5
6.0
2.5
9.0
Mixing Instructions
Add citric acid to water and mix well.
Add Tomamine AO-455 surfactant and mix well.
Add isopropanol and mix well.
WT %
60.0
15.0
25.0
Mixing Instructions
Add sodium xylene sulfonate to water and mix well.
Add Nonidet RK-18 or Nonidet SF-3 surfactant and mix well.
Formula I-303
Formula I-304
WT %
80.0
17.0
3.0
Mixing Instructions
Add Nonidet SF-5 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
Component
Soft water
Dodecylbenzene sulfonic acid, sodium salt (60%)
Lauryl ether sulfate, sodium salt (60%)
Tomamine AO-728 surfactant
Tomamine Amphoteric SC surfactant
Tomadol 91-8 surfactant
Citric acid
WT %
61.0
3.0
29.0
2.0
4.0
1.0
q.s.
Mixing Instructions
Add dodecylbenzene sulfonic acid, sodium salt to water and mix well.
Add lauryl ether sulfate, sodium salt and mix well.
Add Tomamine AO-728 surfactant and mix well.
Add Tomamine Amphoteric SC surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add citric acid to adjust to pH 7.0.
Add dye and fragrance as desired.
40
1.02
Hand DishwashPremium
Formula D-102
USE DILUTION
1 ounce/gallon
32
Institutional Dishwash
Hand DishwashStandard
Component
Water
C12 LAS (60%)*
Ethanol
Tomadol 91-8 or Tomadol 900 surfactant
Sodium lauryl ether sulfate (60%)**
Fatty acid diethanolamide***
Formula I-200
WT %
54.1
26.9
3.0
4.8
8.0
3.2
Mixing Instructions
Best results will be obtained if water temperature is 100120 F.
Add linear sodium alkylbenzene sulfonate to water and mix well.
Add preservatives as desired and mix well.
Add ethanol and mix well.
Add Tomadol 91-8 or Tomadol 900 and mix until dissolved.
Add sodium lauryl ether sulfate and mix well.
Add fatty acid diethanolamide and mix well.
Add dye and fragrance as desired.
Hand DishwashEconomy
Component
Soft water
Dodecylbenzene sulfonic acid, sodium salt (90%)
Lauryl ether sulfate, sodium salt (60%)
Citric acid
Sodium xylene sulfonate (40%)
Ethanol
Tomamine AO-728 surfactant
pH
APPLICATIONS
High-foaming hand dishwash.
Formula D-104
WT %
64.0
16.0
8.0
1.0
3.0
5.0
3.0
Mixing Instructions
Add dodecylbenzene sulfonic acid, sodium salt to water and mix until
dissolved.
Add lauryl ether sulfate, sodium salt and mix well.
Add citric acid and mix well.
Add sodium xylene sulfonate and mix well.
Add ethanol and mix well.
Add Tomamine AO-728 surfactant and mix well.
Add dye and fragrance as desired.
8
USE DILUTION
1 ounce/gallon
Formula D-103
Component
Soft water
Dodecylbenzene sulfonic acid, sodium salt (60%)
Lauryl ether sulfate, ammonia salt (60%)
Opacifier*
Pearlizer**
Tomamine AO-728 surfactant
Tomamine Amphoteric N surfactant
WT %
44.7
23.5
16.5
0.1
2.2
3.0
10.0
3200
7.9
Mixing Instructions
Add dodecylbenzene sulfonic acid, sodium salt to water and mix until
dissolved.
Add lauryl ether sulfate, ammonia salt and mix well.
Add opacifier and pearlizer and mix well.
Add Tomamine AO-728 surfactant and mix well.
Add Tomamine Amphoteric N surfactant and mix well until
homogeneous.
Adjust viscosity as desired with ethanol.
USE DILUTION
1 ounce/gallon
33
Formula I-201
Component
Water
Tomadol 91-6 surfactant
Ethylene glycol monobutyl ether
Sodium xylene sulfonate (40%)
Alkyldiphenyloxide disulfonate*
Trisodium phosphate, anhydrous
Sodium metasilicate, pentahydrate
Potassium hydroxide (45%)
WT %
66.8
5.0
6.5
10.0
4.4
1.3
3.0
3.0
Mixing Instructions
Add Tomadol 91-6 surfactant to water and mix until dissolved.
Add ethylene glycol monobutyl ether and mix well.
Add sodium xylene sulfonate and mix well.
Add alkyldiphenyloxide disulfonate and mix well.
Add trisodium phosphate and mix well.
Add sodium metasilicate, pentahydrate and mix well.
Add potassium hydroxide and mix well.
Add dye and fragrance as desired.
6
13.3
>165
Formula LF-112
A
B
Component
WT % WT %
Water
85.5 85.0
Tetrapotassium pyrophosphate
5.5
5.5
Trisodium phosphate
1.0
1.0
Sodium metasilicate pentahydrate
2.5
2.5
Dipropylene glycol methyl ether*
2.0
2.0
Tomamine AO-405 surfactant
2.0
2.0
Tomamine Amphoteric 400 surfactant
1.5
2.0
*Dowanol DPM, The Dow Chemical Company, or equivalent product.
pH
12.6 12.6
Specific gravity 20/20 F
1.07 1.07
APPLICATIONS
Spot use on concrete floors for difficult stains.
Mixing Instructions
Add tetrapotassium pyrophosphate to water and mix until dissolved.
Add trisodium phosphate and mix until dissolved.
Add sodium metasilicate pentahydrate and mix until dissolved.
Add dipropylene glycol methyl ether and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix until
dissolved.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
As-is
Formula LF-106
A
B
WT % WT %
77.3 77.1
5.0
5.0
14.0 14.0
2.0
2.0
1.7
1.9
13
13
1.16 1.16
Mixing Instructions
Add sodium metasilicate to water and mix until dissolved.
Add tetrapotassium pyrophosphate and mix until dissolved.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
14 ounces/gallon
34
Formula LF-110
A
B
WT % WT %
86.8 87.4
1.0
1.0
2.4
2.4
4.0
4.0
4.5
4.5
1.3
0.7
13.1 13.1
1.04 1.04
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and
mix until dissolved.
Slowly add sodium hydroxide, mix well and cool.
Add sodium metasilicate pentahydrate and mix until dissolved.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
12 ounces/gallon
Formula LF-109
A
B
WT % WT %
90.0 91.0
3.0
3.0
4.0
4.0
2.0
1.0
2.0
12
12
1.015 1.020
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix
until dissolved.
Add diethylene glycol monobutyl ether and mix well.
Add Tomamine AO-405 and Tomamine Amphoteric 400 surfactant or
Tomamine AO-455 surfactant and mix well.
USE DILUTION
0.251 ounce/gallon
Wax StripperPremium
Component
Soft water
Sodium metasilicate, pentahydrate
Ethylenediamine tetraacetic acid, tetrasodium salt (40%)
Tomamine Alkali Surfactant
Tomadol 91-8 surfactant
Monethanolamine
Tomamine Q-17-2 surfactant
pH
Specific gravity 20/20 F
APPLICATIONS
Floor wax stripper.
Formula I-107
WT %
84.25
5.00
2.00
1.25
2.00
5.00
0.50
13.4
1.04
Mixing Instructions
Add sodium metasilicate, pentahydrate to water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add Tomamine Alkali Surfactant and mix well.
Add Tomadol 91-8 surfactant and mix well.
Add monethanolamine and mix well.
Add Tomamine Q-17-2 surfactant and mix well.
USE DILUTION
5:1 to 10:1
35
Wax StripperStandard
Component
Water
Tomadol 91-6 surfactant
Tetrapotassium pyrophosphate
Monoethanolamine
Oleic acid
Viscosity @ 73 F, cps
Phase coalescence temperature, F
pH
APPLICATIONS
Floor wax stripper.
Formula I-202
WT %
75.0
10.0
5.0
5.0
5.0
142
142
11.6
Mixing Instructions
Add Tomadol 91-6 surfactant to water and mix until dissolved.
Add tetrapotassium pyrophosphate and mix until dissolved.
Add monoethanolamine and mix well.
Add oleic acid and mix well.
Add dye and fragrance as desired.
USE DILUTION
Heavy-duty use: 4 ounces/gallon
Regular-duty use: 2 ounces/gallon
Formula LF-113
A
B
WT % WT %
71.8 71.9
5.0
5.0
2.0
2.0
2.0
2.0
5.0
5.0
2.5
2.5
3.5
3.5
5.0
5.0
3.2
3.1
13.4 13.4
1.05 1.05
Mixing Instructions
Slowly add potassium hydroxide to water, mix well and cool.
Add trisodium phosphate and mix until dissolved.
Add tetrapotassium pyrophosphate and mix until dissolved.
Add monoethanolamine and mix well.
Add isopropanol and mix well.
Add ethylene glycol monobutyl ether and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
5:1 to 50:1
36
Formula I-305
WT %
97.1
0.7
1.4
0.2
0.3
0.3
Mixing Instructions
Add monoethanolamine to water and mix well.
Add isopropanol and mix well.
Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix until
dissolved.
Add glacial acetic acid and mix well.
USE DILUTION
As-is
Formula I-306
WT %
96.9
0.7
1.4
0.2
0.3
0.5
Mixing Instructions
Add monoethanolamine to water and mix well.
Add isopropanol and mix well.
Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix well.
Add aqua ammonia and mix well.
USE DILUTION
As-is
Formula I-307
WT %
97.4
0.7
1.4
0.2
0.3
Mixing Instructions
Add monoethanolamine to water and mix well.
Add isopropanol and mix well.
Add Tomamine AO-14-2 and Tomadol 901 surfactant and mix until
dissolved.
USE DILUTION
As-is
Formula I-308
WT %
97.1
0.7
1.4
0.2
0.3
0.3
Mixing Instructions
Add monoethanolamine to water and mix well.
Add isopropanol and mix well.
Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix until
dissolved.
Add Tomadry DAB drying additive and mix well.
USE DILUTION
As-is
37
Carpet Antistat
Component
Tomamine Q-ST 50 surfactant
Isopropanol
Hot water
pH
OTHER FORMULATION NOTES
Carpet antistat. Prevents dirt pickup while reducing static charge.
Formula C-100
WT %
7.0
3.0
90.0
Mixing Instructions
Heat and mix Tomamine Q-ST 50 surfactant prior to use in order to
assure homogeneity.
Blend isopropanol into Tomamine Q-ST 50 surfactant until
homogeneous.
Slowly blend in water until homogeneous.
8.0
USE DILUTION
1 gallon/1000 ft2
Carpet Prespotter
Component
Water
Sodium bicarbonate
Ethylenediamine tetraacetic acid, tetrasodium salt (40%)
Sodium xylene sulfonate (40%)
Tomamine 25-7 surfactant
Tomamine 25-3 surfactant
APPLICATIONS
Carpet prespotter.
Formula I-309
WT %
74.0
5.0
5.0
10.0
2.0
4.0
Mixing Instructions
Add sodium bicarbonate to water and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well.
Add sodium xylene sulfonate and mix well.
Add Tomamine 25-7 surfactant and mix well.
Add Tomamine 25-3 surfactant and mix well.
Formula I-203
WT %
82.0
4.0
8.0
6.0
4
11.9
>167
38
Mixing Instructions
Add Tomadol 25-12 surfactant to water and mix well.
Add sodium metasilicate pentahydrate and mix well.
Add sodium xylene sulfonate and mix well.
Add dye and fragrance as desired.
Formula I-204
Component
WT %
Mixing Instructions
Water
65.0
Add Tomadol 25-12 surfactant to water and mix until dissolved.
Tomadol 25-12 surfactant
13.0
Add sodium lauryl ether sulfate (3EO) and mix well.
Sodium lauryl ether sulfate (3EO) (60%)*
9.0
Add tetrapotassium pyrophosphate and mix well.
Tetrapotassium pyrophosphate**
7.0
All phosphate ester and mix well.
Phosphate ester***
6.0
Add dye and fragrance as desired.
*Calfoam ES-603, Pilot Chemical Company, or equivalent product.
**Substitute 1% sodium metasilicate for 1% of the tetrapotassium pyrophosphate if a more alkaline product is desired.
***Triton H-66, The Dow Chemical Company, or equivalent product.
Viscosity @ 73 F, cps
13
pH
9.6
Phase coalescence temperature, F
150
APPLICATIONS
Rug and upholstery cleaner.
Formula LF-108
A
B
WT % WT %
81.0 80.5
5.0
5.0
5.0
5.0
5.0
5.0
2.0
2.0
2.0
2.5
11
11
1.11 1.11
Mixing Instructions
Add sodium carbonate to water and mix until dissolved.
Add tetrapotassium pyrophosphate and mix until dissolved.
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well.
Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well.
Add Tomamine Amphoteric 400 surfactant and mix well.
USE DILUTION
10:1 to 40:1
Formula I-205
WT %
89.0
5.0
Sodium tripolyphosphate
2.0
Isopropyl alcohol
4.0
Viscosity @ 73 F, cps
pH
Phase coalescence temperature, F
APPLICATIONS
Rug and carpet cleaner.
Mixing Instructions
Add Tomadol 25-12 surfactant to water and mix until dissolved.
Add sodium tripolyphosphate and mix until dissolved.
Add isopropyl alcohol and mix well.
Add fluorescent whitening agent, dye and fragrance as desired.
4
8.8
>167
USE DILUTION
For rugs and carpet: 10:1
For upholstery: 20:1
39
Formula I-206
WT %
67.4
6.7
6.0
2.0
2.0
13.9
2.0
14
13.2
140
USE DILUTION
As-is to 8:1
Mixing Instructions
Add sodium lauryl ether sulfate to water and mix until dissolved.
Add Tomadol 91-6 or Tomadol 900 surfactant and mix well.
Add fatty acid diethanolamide and mix well.
Add trisodium phosphate and mix until dissolved.
Add sodium metasilicate pentahydrate and mix until dissolved.
Add isopropyl alcohol and mix well.
Add dye and fragrance as desired.
Formula I-207
WT %
90.8
0.8
1.7
0.5
1.7
1.0
3.5
2
10.0
165
APPLICATIONS
Wall and tile cleaner.
40
Mixing Instructions
Add sodium lauryl ether sulfate to water and mix until dissolved.
Add Tomadol 23-6.5 surfactant and mix well.
Add fatty acid diethanolamide and mix well.
Add sodium metasilicate pentahydrate and mix until dissolved.
Add trisodium phosphate and mix until dissolved.
Add ethylene glycol monobutyl ether and mix well.
Add dye and fragrance as desired.
Laundry Commercial
Liquid Detergents
Formula L-301
WT %
45.0
5.0
3.5
24.0
9.0
4.5
6.0
3.0
Mixing Instructions
Add sodium metasilicate, ethylenediamine tetraacetic acid, tetrasodium
salt and potassium hydroxide to water, mix until dissolved and solution
is clear.
Slowly add dodecylbenzene sulfonic acid while blending.
If temperature exceeds 140 F, allow solution to cool before proceeding.
Add Tomamine Amphoteric LH surfactant and mix well.
Add Tomadol 900 surfactant and mix well.
Add Tomadol 600 surfactant and mix well.
Formula L-302
WT %
55.0
3.0
4.0
18.0
6.0
4.0
8.2
1.8
Mixing Instructions
Add tetrapotassium pyrophosphate, Kasil 6 potassium silicate and
potassium hydroxide to water, mix until dissolved and solution is clear.
Slowly add dodecylbenzene sulfonic acid while blending.
If temperature exceeds 140 F, allow solution to cool before proceeding.
Add Tomamine Amphoteric 400 surfactant and mix well.
Add Tomadol L124 surfactant and mix well.
Add Tomadol L80 surfactant and mix well.
Formula L-303
Component
WT %
Mixing Instructions
Water
70.7
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Sodium metasilicate pentahydrate
8.0
Add potassium carbonate and mix until dissolved.
Potassium carbonate
8.0
Add Tomamine Amphoteric LH surfactant and mix well.
Tomamine Amphoteric LH surfactant
3.0
Add Tomadol L124 surfactant and mix well.
Tomadol L124 surfactant
7.0
Add Tomadol 600 surfactant and mix well.
Tomadol 600 surfactant
1.5
Add Tomadol L80 surfactant and mix well.
Tomadol L80 surfactant
1.5
Add Acusol 445N and mix well.
Acusol 445N*
0.2
Add Tinopal CBS-X Fluorescent Whitening Agent and mix well.
Tinopal CBS-X Fluorescent Whitening Agent**
0.1
*Acusol 445N, Rohm and Haas, or equivalent product.
**Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
41
Laundry Commercial
Liquid Detergents
WT %
72.0
7.0
9.0
6.0
6.0
WT %
80.0
7.0
7.0
6.0
WT %
76.0
18.0
2.0
4.0
Formula L-305
Mixing Instructions
Add Tomadol L144 surfactant to water and well.
Add Tomadol L124 surfactant and mix well.
Add Tomadol 23-5 surfactant and mix well.
Formula L-304
Mixing Instructions
Add Tomadol 25-12 surfactant to water and mix until dissolved.
Add Tomadol 25-7 surfactant and mix until dissolved.
Add Tomadol 600 surfactant and mix well.
Add glycerine and mix well.
Formula L-306
Mixing Instructions
Add Tomadol L124 surfactant to water and well.
Add Tomadol 23-5 surfactant and mix well.
Add d-limonene and mix well.
Formula L-307
Component
WT %
Mixing Instructions
Mineral spirits
47.0
Add dodecylbenzene sulfonic acid to mineral spirits and mix well.
Dodecylbenzene sulfonic acid
23.0
Add Tomadol 25-7 surfactant and mix well.
Tomadol 25-7 surfactant
12.0
Add Tomadol 91-6 surfactant and mix well.
Tomadol 91-6 surfactant
12.0
Add Tomadol 91-2.5 surfactant and mix well.
Tomadol 91-2.5 surfactant
6.0
APPLICATIONS
Laundry detergent.
NOTE: This detergent must be used with 50% more than the typical amount of Part B caustic builder. An extended suds bath at higher temperature
(e.g., 160 F) is recommended to provide optimal reaction time and washing conditions for this formula.
42
Laundry Commercial
Liquid Detergents
Formula L-200
Blending Procedure: Blend separately from the selected nonionic surfactant Part A from Formula L-304 through L-307, and deliver separately to wash water
in the Part A:B ratio of 1:2
PHOSPHATE/CAUSTIC
Component
WT %
Mixing Instructions
Water
43.3
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Sodium metasilicate pentahydrate
16.8
Add tetrapotassium pyrophosphate and mix until dissolved.
Tetrapotassium pyrophosphate
9.5
Slowly add potassium hydroxide, mix well and cool.
Potassium hydroxide (45%)
30.4
NON-PHOSPHATE/CAUSTIC
Component
WT %
Mixing Instructions
Water
52.5
Add sodium metasilicate pentahydrate to water and mix until dissolved.
Sodium metasilicate pentahydrate
26.4
Slowly add potassium hydroxide, mix well and cool.
Potassium hydroxide (45%)
13.5
Add potassium carbonate and mix well
Potassium carbonate
7.6
APPLICATIONS
Laundry detergent.
Formula L-308
WT %
78.0
2.0
2.0
4.0
4.0
4.0
6.0
Mixing Instructions
Add sodium citrate to water and mix until dissolved.
Add sodium gluconate and mix until dissolved.
Add Baypure CX 100 and mix well.
Add triethanolamine and mix well.
Add Tomadol L124 surfactant and mix well.
Add Tomadol 23-5 surfactant and mix well.
Formula L-309
Component
WT %
Water
77.6
Sodium borate
2.0
Baypure CX 100*
5.0
Triethanolamine
5.0
Tomadol 25-12 surfactant
3.5
Tomadol 25-7 surfactant
3.5
Tomadol 23-5 surfactant
3.0
Acusol 505N**
0.2
Tinopal CBS-X Fluorescent Whitening Agent***
0.2
*Baypure CX 100, LANXESS Corporation.
**Acusol 505N, Rohm and Haas.
***Tinopal is registered mark of Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
43
Mixing Instructions
Add sodium borate to water and mix until dissolved.
Add Baypure CX 100 and mix well.
Add triethanolamine and mix well.
Add Tomadol 25-12 surfactant and mix well.
Add Tomadol 25-7 surfactant and mix well.
Add Tomadol 23-5 surfactant and mix well.
Add Acusol 505N and mix well.
Add Tinopal CBS-X Fluorescent Whitening Agent and mix well.
Laundry Commercial
Liquid Detergents
Formula L-310
WT %
90.1
0.7
1.2
0.7
1.4
2.8
2.0
1.1
Mixing Instructions
Add soda ash to water and mix until dissolved.
Add sodium citrate and mix until dissolved.
Add sodium gluconate and mix well.
Add triethanolamine and mix well.
Add sodium dodecylbenzene sulfonic acid and mix well.
Add Tomadol L144 surfactant and mix well.
Add Tomadol L80 surfactant and mix well.
Formula L-311
WT %
72.0
4.0
8.0
4.0
8.0
4.0
Prespotter
Mixing Instructions
Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until
dissolved.
Add ammonium hydroxide and mix well.
Add Tomamine Amphoteric LH surfactant and mix well.
Add isopropanol and mix well.
Add ethylene glycol monobutyl ether and mix well.
Formula L-312
Component
WT %
Mixing Instructions
Deionized water
84.2
Add Tomadol 25-3 surfactant to water and mix well.
Tomadol 25-3 surfactant
9.0
Add Tomadol 25-7 surfactant and mix well.
Tomadol 25-7 surfactant
1.0
Add sodium hydroxide and mix well.
Sodium hydroxide (50%)
2.9
Add citric acid monohydrate and mix well.
Citric acid monohydrate
2.4
ADd Carbopol 676 and mix well until homogeneous.
Carbopol 676*
0.5
*Carbopol, Lubrizol Advanced Materials, Inc.
APPLICATIONS
Laundry detergent.
NOTE: A thickener such as Carbopol 676 must be used to stabilize the formulation, as the formula produces a product that is not homogeneous.
44
Laundry Commercial
Powders
Formula L-313
WT %
21.9
18.0
28.0
20.0
3.0
4.0
1.8
1.8
1.5
Mixing Instructions
Mix sodium carbonate, sodium metasilicate anhydrous, sodium
hydroxide, sodium chloride, sodium tripolyphosphate and tetrapotassium
pyrophosphate, and mix thoroughly.
Add Tomadol 25-12, Tomadol 25-7 and Tomadol 23-5 surfactants
slowly while mixing.
Continue mixing until homogeneous.
WT %
75.8
4.0
6.0
1.5
Mixing Instructions
Mix sodium carbonate, Versene and sodium metasilicate thoroughly.
Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5
surfactants slowly while mixing.
Add Acusol 445ND and Tinopal CBS-X Fluorescent Whitening Agent
slowly while mixing.
Continue mixing until homogeneous.
Light-Duty Powder
Component
Sodium carbonate
Versene powder*
Sodium metasilicate anhydrous
Tomadol 25-9 surfactant
Tomadol 25-7 surfactant
Tomadol 1-5 surfactant
Tomadol 23-5 surfactant
Acusol 445ND**
Tinopal CBS-X Fluorescent Whitening Agent***
Formula L-314
7.0
1.5
3.0
1.0
0.2
45
Laundry Commercial
Powders
Formula L-315
Component
WT %
Mixing Instructions
Sodium carbonate
74.3
Mix sodium carbonate, sodium metasilicate anhydrous and sodium
citrate thoroughly.
Sodium metasilicate anhydrous
3.0
Add Tomadol L124, Tomadol 600 and Tomadol L80 surfactants slowly
Sodium citrate
5.0
while mixing.
Tomadol L124 surfactant
4.7
Add Acusol 445ND, sodium percarbonate, tetraacetylethylenediamine,
Tomadol 600 surfactant
1.0
Purafect OX Enzyme and Tinopal CBS-X Fluorescent Whitening Agent
Tomadol L80 surfactant
1.0
slowly while mixing.
Acusol 445ND*
1.0
Continue mixing until homogeneous.
Sodium percarbonate
8.0
Tetraacetylethylenediamine
1.0
Purafect OX Enzyme**
0.8
Tinopal CBS-X Fluorescent Whitening Agent***
0.2
*Acusol 445ND, Rohm and Haas.
**Purafect OX Enzyme. Danisco US Inc. Genencor Division.
***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
Formula L-316
Component
WT %
Mixing Instructions
Sodium carbonate
89.9
Mix sodium carbonate, Versene and sodium metasilicate thoroughly.
Versene powder*
2.0
Add Tomadol L144 and Tomadol L80 surfactants slowly while mixing.
Sodium metasilicate anhydrous
3.0
Add Tinopal CBS-X Fluorescent Whitening Agent slowly while mixing.
Tomadol L144 surfactant
3.0
Continue mixing until homogeneous.
Tomadol L80 surfactant
2.0
Tinopal CBS-X Fluorescent Whitening Agent**
0.1
*Versene, The Dow Chemical Company.
**Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
46
Laundry Commercial
Powders
Formula L-317
Component
WT %
Mixing Instructions
Sodium carbonate
47.8
Mix sodium carbonate, sodium metasilicate anhydrous, and
ethylenediamine tetraacetic acid, tetrasodium salt thoroughly.
Sodium metasilicate anhydrous
19.0
Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5
Ethylenediamine tetraacetic acid, tetrasodium salt, anhydrous
12.0
surfactants slowly while mixing.
Tomadol 25-9 surfactant
1.0
Add Acusol 445ND, sodium percarbonate, tetraacetylethylenediamine,
Tomadol 25-7 surfactant
5.0
Purafect OX Enzyme and Tinopal CBS-X Fluorescent Whitening Agent
Tomadol 1-5 surfactant
1.0
slowly while mixing.
Tomadol 23-5 surfactant
2.0
Continue mixing until homogeneous.
Acusol 445ND*
1.5
Sodium percarbonate
8.0
Tetraacetylethylenediamine
1.0
Purafect OX Enzyme**
1.4
Tinopal CBS-X Fluorescent Whitening Agent***
0.3
*Acusol 445ND, Rohm and Haas.
**Purafect OX Enzyme. Danisco US Inc. Genencor Division.
***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
Formula L-318
Component
WT %
Mixing Instructions
Sodium carbonate
52.1
Mix sodium carbonate, sodium tripolyphosphate and tetrapotassium
phyrophosphate thoroughly.
Sodium tripolyphosphate
6.0
Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5
Tetrapotassium phyrophosphate
8.0
surfactants slowly while mixing.
Tomadol 25-9 surfactant
1.0
Add sodium metasilicate, Acusol 445ND, sodium percarbonate,
Tomadol 25-7 surfactant
4.0
tetraacetylethylenediamine, Purafect OX Enzyme and Tinopal CBS-X
Tomadol 1-5 surfactant
1.0
Fluorescent Whitening Agent slowly while mixing.
Tomadol 23-5 surfactant
2.0
Continue mixing until homogeneous.
Sodium metasilicate anhydrous
15.0
Acusol 445ND*
0.5
Sodium percarbonate
8.0
Tetraacetylethylenediamine
1.0
Purafect OX Enzyme**
1.2
Tinopal CBS-X Fluorescent Whitening Agent***
0.2
*Acusol 445ND, Rohm and Haas.
**Purafect OX Enzyme. Danisco US Inc. Genencor Division.
***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corporation.
APPLICATIONS
Laundry detergent.
47
Miscellaneous
Foam Markers
Formula V-200
WT %
22.0
20.0
31.5
4.0
5.0
17.5
Mixing Instructions
Add Tomamine Amphoteric L surfactant to water and mix well.
Add alcohol sulfate and mix well.
Add fatty acid diethanolamide and mix well.
Add isopropyl alcohol and mix well.
Slowly add sodium lauryl ether sulfate (3EO) and mix well until
homogeneous.
418
9.7
>176
USE DILUTION
12 ounces/gallon
Formula V-201
WT %
42.5
15.0
4.0
5.0
33.5
Mixing Instructions
Add Tomamine Amphoteric L surfactant to water and mix well.
Add fatty acid diethanolamide and mix well.
Add isopropyl alcohol and mix well.
Slowly add sodium lauryl ether sulfate (3EO) and mix well until
homogeneous.
55
9.7
>176
USE DILUTION
12 ounces/gallon
48
tell me more
www.airproducts.com/nimble
110-10-006-US