Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Report
Edgecam 2015 R1
This document contains a list of bug fixes and enhancement requests implemented in
Edgecam 2015 R1.
For new features and enhancements in this release, please refer to Whats New in Edgecam
2015 R1.
The ID column in the report lists the development task number associated to the item and
you also find these listed against your original support call in the Customer Support Portal.
ID
Title
30003 Editor - cannot re-sequence the supplied Heidenhain file without losing
30046
30061
30168
30181
30265
comments
Index - datum shift does not work
Add 'Current CPL' to list of views in context menu of view status bar
Simulator - support for wire EDM
Edgecam - Enhancement for line width options (Thickness) (Strength)
Intellisnap does not work creating rectangles (can't snap CPLs or entities)
30337 SolidLink - Solid Machinist for Pro-Engineer Creo - enable thread/plane and
30406
30410
30415
30434
30506
30576
30655
30822
30840
30849
Release Notes
Fixed.
Fixed.
Implemented.
Implemented.
Implemented.
Implemented.
Implemented.
Implemented.
Fixed.
Implemented.
Use Waveform Roughing.
Implemented.
Implemented in Ribbon interface.
Implemented.
Superseded 2D3D functionality in 2014 R2.
Implemented.
Implemented.
30904 Manual Turn Features - Cannot extract profile from eccentric faces
30950 Lathe setup - create sub axial and sub radial cpls automatically
30977 CoroGuide link Imported tool has wrong dimensions
Implemented.
Implemented.
CoroGuide toolstore Import has been retired, this has been
superseded by Adveon.
30997 Feedback window - All messages should include relevant instruction number Implemented.
31009 Rotary Milling to support XC mill cycles (Axial Rotary Mode)
31047 Part Modeler - Coordinate input dialog to be called by XY&Z keys as in
Implemented.
Implemented.
Edgecam
31084 Finish Turning - Override Angles does not seem to work correctly
31095 Catia V5 - Japanese filename or path fails to load - SPATIAL
31116 Finish Turning - CRC register value is not being passed down to NC code
Fixed.
Fixed.
CRC Register setting on Finish Turn Dialog can now be output to the
NC - add the CRC Register token to the Linear Interpolation output.
31134
31391
31418
31425
Fixed.
Implemented.
Implemented.
Fixed in a previous release.
31437
31504
31659
31819
31868
31884
31917
31936
32004
32048
32214
32318
32451
Install: rename Edgecam dlls to make conflicts less likely (DLL Hell)
Text Milling - enable cut increment (New Engraving Cycle)
SolidLink DEV00019961 Unigraphics NX - develop CADLinks
Part Modeler - shows white interval [blinks] when calling a window
command
Rest Roughing - support for Edge Loop Feature as boundary
Part Modeler - line weight to be plotted / printed (thickness)
New Rough/ Finish Turn - Ignore undercuts is ignored on face
PDI - Not shown in "Extras"
Part Modeler - User Defined Thread standards
Sentinel RMS license for Unix
Part Modeler - to visualise in which part the procedure was created
Strategy Manager - Have default colours for the node types
Part Modeler - cannot get rid of saving unbuilt model message
Part Modeler - fail to open DWG/DXF/STEP with special character
Maintain Index does not set system vars XCPL YCPL ZCPL
Templates Mill - enhance rotary limit angles (Range [-+360])
Part Modeler - Face-To-Face Loft does not allow for profile start selection
Implemented.
Fixed in a previous release.
Fixed.
Fixed.
Implemented.
Our licensing solution is for the Windows platform only.
Fixed.
Implemented.
Cannot reproduce.
Fixed in a previous release.
Fixed.
A +-360 option is now available on milling CGDs.
Implemented.
Fixed.
Fixed.
Fixed in a previous release.
File corrupted, cannot reproduce in new session.
Fixed.
Now possible with Drag and Drop CPL.
This is a limitation of Sentinel RMS licensing that Safenet currently
have no plans to change.
Works as designed.
Title
33087 Edge Loop Feature - Should close gaps instead of issuing "Disconnected or
Release Notes
Fixed.
branching contour"
33098 German translation - Geometry > Create CPL > Reference tab View list
33206
33307
33437
33526
33720
33793
34707
34740
35332
35778 Feature Find and Slot Cycle - include Slot parameters and machine single
pass
35854 Profiling Helical - ignores selection order of geometries when Nearest
Neighbour is off
35877 New turn features - Feature enters the component on the attached SAT file
35908 Part Modeler - Construction line/geometry on profile does not allow feature Suspected corrupt file; cannot reproduce the issue in a new session
35930 Catia - does not import face colours from CATPart
36101 PDI - Add Job (Toolkit) information to pdi_mc_get_sequence_info
rebuilt
within 2014 R2
Fixed.
The Job Name can be obtained using PDI. MC_Get_Sequence_Info.
36152 Part Modeler - Insert Component (reference) does not work with attached
Fixed.
part
36254 Part Modeler - Part positioning (transform) can't be deleted
36616 Part Modeler - Increase the range for the face offset procedure
36705 Part Modeler - Colour of detail view cannot be edited if you realise view
Fixed.
Fixed in a previous release.
36716 Part Modeler - planar face not found at counterbore hole plane
Fixed in a previous release.
37448 Profiling Operation - Remove the ability to select Edge Loop Feature and Flat Fixed.
Face Feature
37501 Feature Teacher required for turn features similar to 2010r2 Hole features Implemented.
37941 5 axis - Rapid moves simulated as resolved movement in 5 axis cycles
Fixed.
37962 Background processing - enable Safe Start Point when creating a sequence
Implemented.
Implemented. Also, intellisnap can be turned off and just used when
Implemented.
Families
39947 Hole Cycle fails to set FEED system variable
40197 User Interface OpenGL - isometric view related to current CPL
40525 Strategy Manager - Interface - Constraint windows and columns should
Fixed.
Implemented.
Implemented.
Fixed.
toolpath (gouge)
40907 Part Modeler - Update About Part Modeler when installing a Service Pack
Fixed.
41056 Sequence Browser - scroll position should be remembered when back from
Fixed.
Design to Manufacture
41253 Profiling CRC - comp on applied at the end of lead in (too late - lead angle
dependent) - gouges
41309 Straight Turning Operation - Approach Type always Safe - does not follow
Preferences
Fixed.
Fixed.
Title
Release Notes
Implemented.
41965 ToolStore Administrator - clear indication that the active database is on the
Implemented.
42553
43184
43252
44069
44270
44431
44615
network
Code Generator - unexpected NEXTMOVE at cycle sub if subs processed at
the end
Part Modeler - Allow 'No License' warn when PM is not selected/licensed on
CLS
Language - consistency on naming Inverse Turn
Profiling Operation - "Entity does not lie in plane of CPL" error message
when machining surface
Investigate File Size - loading/saving time on attached parts
Part Modeler - Attached DXF only can be extruded after opening in Edgecam
and resaving
User Interface - On top view, the part disappears if CPL is not on the screen.
Fixed.
Implemented.
Fixed.
Wireframe lines were selected with the surfaces, issuing the error
message properly.
Fixed.
Using the new 2D to 3D functionality (2D to 3D trace).
No longer reproducible.
44642 Sequence Browser - After regeneration, the sequence window should not
Fixed.
44900 Rotary Mode - rotary drilling toolpath and simulation shown as planar
Implemented.
45117 Part Modeler German version - measuring units working inversely on 'no
Fixed.
49453
template' drawing
Simulator - does not detect collisions between stock and "base" or "guard"
elements
Part Modeler - Graphic problems with Basic Themes (Win 7)
Print - Can't print Hidden Line correctly
Simulator - Datum Shift creates out of position toolpath
Rest Roughing - taper tool fails to create cycle as "too big diameter" check
looks at top diameter, not small
Part Modeler - Add Multi View function like Radan
Touch Screen Basics
Strategy Manager - creating links when zoomed will display wrongly
Solid Machinist Preference - Display tolerance for Inventor IPTs, control over
facets
Code Generator - Change the "error 24" message to tell user the output file
location cannot be accessed
Edgecam crashes loading STEP files from PRO-E/CREO Elements 1.0
New Engraving - Text Milling - bad excessive retracts with certain characters 0 8 etc
Part Modeler - Drawing - ability to hide/show constraints and dimensions to
print
Strategy Manager - Ability to expand the dialog window for Note Nodes
49549
49636
50658
50887
45764
45822
46072
46417
47204
47387
47420
47531
47538
47798
48604
48905
48973
Tool Preview)
51294 Part Modeler - Rendered threads to have correct graphics for Left and Right
handed threads
51381 Part Modeler - Snap from solid edges are not visible when shading is on
51714
53071
53418
54029
54058
54236
54251
54456
54533
54702
54721
54768
54798
54848
Implemented.
Fixed in a previous release.
Implemented.
Fixed.
Fixed.
This is already possible.
Basic Implementation.
Fixed.
Implemented.
Error has been changed.
Fixed.
Fixed.
This is already possible within Part Modeler.
Fixed.
Fixed.
Fixed.
Resolved by the new Engraving Cycle.
Implemented.
The unused menus mentioned on the description were removed.
Fixed.
Fixed in a previous release.
Implemented.
Spring Technology are now supplying a Plugin to Edgecam.
Fixed.
Fixed.
Fixed.
Fixed.
Solidlink uses INNO installer.
Token added.
Implemented in 2D to 3D functionality.
Fixed.
Complete
Implemented.
Implemented.
Fixed.
Title
Release Notes
55215 Usability: Edgecam, CADLinks and Live Job Reports - Single Installation
Implemented.
55306 PEPS wire - changing the nozzle heights in the cycle dialog has no effect on
Implemented.
55414
55762
56116
56240
56324
56573
56662
56682
57272
57449
57681
57737
57740
57858
58037
the length of wire when simulated - software uses nozzle height as set in
machine setup
Edgecam and NC Simul - The solids from all sequences are present on NC
Simul even if a single sequence was selected
Workflow Strategies - Drilling strategies to handle countersinks
Workflow View toolbar - Change Tool Display to drop down list of modes
similar to the view control
IGES - Hangs if file is dragged and dropped in EC icon/open
Catia assemblies (Product Document) from customer will not open in
Edgecam
Edit Sequence - Changing Home/Toolchange positions does not autoregenerate all instructions (Move to Toolchange and older cycles) - needs
manual regen
If the Stock layer is not visible, Roughing may hang up
Index - Nutated Head-head can only rotate the other way, but Edgecam does
not respect the limits
Part Modeler - Dialog boxes moves to the left when some command is
selected again
Workflow Edit Sequence - Changing the Mating Offsets will move the
machine only, no Fixture
Waveform -Stepover lower than 16% causes strange moves
Workflow Ribbon interface - Make ToolStore one click away
Documentation - 5 axis - add the default project distance to the project onto
wire feature - wire feature cannot be created on attached part it fails to
include the conical face
Part Modeler - Allow to put dimensions between the arrows of an angle
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Note added to Help.
Fixed.
Fixed.
Fixed.
Fixed.
58309 New Rough Turn - Add waveform [rough profiling with lacing] strategy
Implemented.
58311
58610
58629
58681
58962
58964
(similar to milling)
Part Modeler - Double-click for chaining adds the clicked entity twice on
closed profiles
SpaceClaim threaded holes not found as such
Rest Roughing - Machine areas that had already been machined
Roughing Waveform strategy with a stepover of 40% leaves material on
some passes
PDI Plugins - PDI.Set_Mod_Call_Back() errors the message "PDI
name_of_my_plugin.exe not found"
Turn - Update Stock - Separation between mainspindle and subspindle
59059 Templates Turn CY - arc output with Radius type is impossible for all helical
59066
59079
59146
59175
59231
59241
59267
59344
59403
moves
Text Feature - Vector - Ability to set space % like true-type
Edgecam Themes
Roughing - Waveform - Backpass retract is not applied
wire feature - improve the handling of free form faces so that the features
are created to within tolerance
Profiling Protect Solids - Should consider negative offset for chamfer
applications
toolstore and edgecam toolchange - automatically adjust gauge values when
orientation or Insert gauge point changes
Roughing - Stays away from wall when machining Open Mill Feature due to
In Process Stock
Manufacture Mode - Wire license combined with Mill license will confuse
Edgecam environment when selecting post processor
Workflow Fixture Manager - Ability to set 2 moving jaws (self centering vice)
after installation
New Dialogs - Highlight cycle Advanced Buttons that have values
Workflow - Insert - Cannot insert in a layer different than geometry
Workflow Component Setup - ability to define <none> material as
technology data
New Dialogs - Masks default to standard after the dialog is closed (should be
modal)
59943 Hole cycle - Alternate solution may not work unless another tool is called
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
A new setting added.
Implemented.
Implemented.
Fixed.
Fixed.
Fixed.
Implemented.
Fixed.
Resolved in Edgecam Workflow ribbon interface.
Implemented.
This variable is outdated and not relevant anymore.
Implemented.
Fixed.
Implemented.
Masks can be created and added to the ribbon as their own command.
You can also change what mask a button uses in Customisation.
Fixed.
Title
60108 PCI - SetModifier to apply VMC data works with wireframe but does not
Release Notes
Implemented.
60373 Workflow Pick Stock - Layer and Colour are not retained from user' selection Fixed.
60404 Workflow - Add Probing
60511 Sequence Browser -Create Custom/User Groups behaves strange and can
Implemented.
Fixed.
hang Edgecam
60561 Profiling Help - Depth description on profiling cycle is not correct
Fixed.
60569 Toolstore - Holder Origin Gauge Datum is always Axial - Orientation changes Fixed.
machine
60879 Sequence Browser - after custom/user group new instructions/groups
60993
61025
61033
61054
61403
cannot be seen
User Interface - Ability to double click a ppf and open it in workflow
Rough Turning - Air cutting a lot trying to Use Current Stock
New Dialogs - masks on NETWORK location not read by Edgecam
Part Modeler - Improve draft feature angle range to -90 to 90
Part Modeler - Ability to set an importing tolerance for DWG/DXF files
Fixed.
Implemented.
Fixed.
Fixed.
Range increased to -89.9 to 89.9.
Resolved by the implementation of the new 2D to 3D functionality.
Fixed.
Fixed.
Fixed.
original is deleted
61560 Code Wizard - Turning templates - Add PLANEGCODE to valid tokens in CY
Fixed.
Implemented.
Fixed.
database
61828 Part Modeler - Edit transform to show previously set values
61857 Part Modeler Hole creation - Hole units to default to document's units
Implemented.
Fixed.
61896 Roughing - Narrow area with Waveform removes regular cut increment
Fixed.
61899
61989
62027
62029
Fixed.
Fixed.
Fixed.
Fixed.
62082 Sim SDK - PDI access to exporting Machine Tree elements (Fixtures)
Implemented.
62106 NC Simul link - Edgecam Userpath for NC Simul Interface Data
Spring Technology are now supplying a Plugin to Edgecam.
62158 Feature Finder - Edgecam stays processing forever part with embedded IGES Fixed.
(Sheet Bodies)
62220 Plugins doesn't read files from NETWORK location
Fixed.
62270 Toolstore - Bore tool doesn't stay on radial orientation (mounting tab)
Fixed.
62290 Instruction Sequence - Regen is slower on sequence with several instructions Fixed.
62305 Simulator - Very slow start on attached PPF - OK if inserted as component
62471 Part Modeler - Custom Inch Threads are passing Pitch instead of TPI
62506 wire feature - the feature profile does not follow the solid contour on
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Title
Release Notes
Spring Technology are now supplying a Plugin to Edgecam.
Fixed.
improper argument
63289 Workflow - CPL flashes in Quick Access Toolbar
Select CPL is now available by default. No need to add to QAT.
63330 Profiling Protect Solid - Trims toolpath depending on tolerance/tool diameter Fixed.
63543 PEPS Wire - G282 must be before any UV axis moves (brother post
Fixed.
processor)
63562 Code Wizard - Okuma Template - support cylindrical circular interpolation
Implemented.
63571 Profiling - Machining the feature with Protect Solid causes the toolpath to be Fixed.
fragmented
63586 PEPS Wire - acfanuc.ucp post displays 'Number out of range' error
63608
63623
63624
63644
63691
63827
63866
Fixed.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
63941 Templates Turn - Review XMOVE missing token in Hole Cycle constructors
Fixed.
64016 Templates Turn - Add XMOVE, YMOVE and ZMOVE (missing tokens) to CY
Fixed.
64039
64047
64059
64081
64131
64145 Live Job Reports - All Jobs Report (main page) to have column ordering
Fixed.
Spring Technology are now supplying a Plugin to Edgecam.
Option implemented.
Fixed.
Spring Technology are now responsible for the Edgecam/NCSIMUL
link.
Implemented.
64150 Update stock generates a 4 axis command and makes editing difficult
64152
64166
64168
64172
64301 Part Modeler - Ability to merge multiple solid with a single command
64406 Live Job Reports - Investigate Service problem: Cannot perform this
Fixed.
Message issued.
result
64531 Edgecam should set a DIRECTION modifier for all angular moves - implement Variables implemented.
for Turning
64541 Toolstore - Axial turning tool has wrong orientation when regen and error
64569
64617
64633
64646
64762
64768
Fixed
Fixed.
Fixed.
Fixed.
This is an SQL Express limitation. See Help file.
Fixed.
Fixed.
64771 Roughing Waveform - Option to force link moves to stay at depth rather than Improved.
64859 Solid Machinist - Reload Multiple Instances works as always active
Fixed.
64862 Workflow Create Sequence - "The Job name must be unique" displayed
Fixed.
Title
64947 Workflow Alignment Options - Align for milling with cpl in the center is
Release Notes
Fixed.
eccentric
65018 Code Wizard - changes on format table on CGX mode corrupt format table
Fixed.
Fixed.
Implemented.
65070 Feature Properties - CPL attribute keeps the original CPL name from Inserted Fixed.
65186
65190
65217
65267
65289
65299
65311
65313
65326
simulation
Update CadLinks XML File Format documentation
Ribbon - The status bar is missing when Setup Tab is active
strategy manager - when applying workflow strategies the approach type for
waveform is incorrectly set for waveform ("bad list index used" warning in
other cases too)
Profiling Protect Solid - Incomplete toolpath on open pocket
Ribbon - Cannot add existing masks to ribbon
PDI include &COMMANDSTATUS support for differentiating create, edit
and regenerate
Workflow Strategies - Investigate Counterboring preferring Roughing cycle
over Plunge Tool
Part Modeler - Fails to open STEP file (.stp)
Workflow Strategies - Parting Off should have safe approach if &XTOOL
below stock diameter
Adveon to detect current database / support folder setting and update
accordingly [Ticket#2014071877000141]
Workflow Strategies - No 3D stock available for Strategy Manager tool filter
in attached part
Ribbon Customisation - Image size ignored for "Tools" customisation.
65355 Templates Turn Okuma - Add "Converted High Feeds G-Code" (default G01)
65369
65401
65446
65542
Fixed.
Updated
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Works as designed.
Fixed.
Fixed.
Interim solution provided by Adveon.
Fixed.
Fixed.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
65565 Profiling Cycle - Protect Solid makes cycle fail with specific tool diameter
Fixed.
Fixed.
Fixed in SU1.
65653
65657
65663
65668
65714
65756
65775
65813
65861
65908
65939
65969
65999
66035
66040
66056
66061
66089
66090
66093 Workflow Settings - Workflow is not loading the Default Material chosen on
Settings
66128 Hole features - stepped diameters - Thread data is placed in the wrong step
Fixed.
Title
Release Notes
Fixed.
Fixed.
classic interface
66195 Edgecam Installer - Cannot install Edgecam without SQL silently
66201 CLS Licensing Guide - Update Managed Homework Facility
66208 Workflow Create Sequence - Support 5 Axis/ Multi Axis post processors
Fixed.
The Managed Homework License has been removed from the Price
List and the associated help pages.
Implemented.
to PDF/Image Format
Ribbon Customisation - Copy a standard tab to a user tab
Improved 2nd Operation handling - Part1
Edgecam Launcher - Part Modeler recent files list does not update
Workflow strategies - turn tool selection ignores valid tools on the toolkit
(filter ranges need review)
PEPS Wire - Problems in Generating NC code with "Run After" PDI
User Interface - The option "current" of "in CPL" which hides the toolpath is
not working properly
Code Wizard - Sub Spindle Bar Pull - One GCODE token to output what was
chosen in Edgecam
Instruction Sequence -Sequence Insert of PCI Run Command makes
instructions disappear and mess up the sequence
Manual Turn Feature - Ability to edit extensions
Intellisense - pci-vsdoc.js misses FreeCommand()
Migrate Tool - Add option to copy Support Files folder
Thread Milling - Gouge solid with associative thread and number of passes
bigger than 1
Trap tool graphics entity no < 0 in pdi_mc_put_command
Simulator - If post processor unit is different than part unit CPL marker is
very big
Workflow - without solid machinist license, Insert > Solid will cause crash
Implemented.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Implemented.
Fixed.
Fixed.
66441
66442
66444
66454
66463
66475
66485
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Fixed.
66487
66488
66508
66510
66512
66515
66547
66569
66582
66586
66601
66605
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
files.
66724 Merge sequence moves component trying to fit it on the table
Fixed.
Title
66763 Workflow Create Sequence - Show all machines crashes Edgecam if the
Release Notes
Fixed.
Fixed.
Documented.
Implemented.
Fixed.
Fixed.
Fixed.
Implemented.
Available under Customise the Ribbon.
Fixed.
Fixed.
66929 New Rough Turn - CRC pathcomp code (G40/41/42) is not passed to nc code It is by design.
66932 Workflow Strategies - Add calculation based values for lead in (Profiling and
66955
66960
66961
66962
66967
66977
66986
66988
66990
66994 Instruction Sequence - Instructions are not recalculated after edited cycle
on (fillet)
67050 PCI - SetPackage(0) greys out the sequence browser in Workflow
67053 Workflow - Crashes when trying to save/open file tab after selecting the
Fixed.
Fixed.
Fixed.
Fixed.
67069 maintain Index CPL name after part transform (rotate, translate)
67070 Workflow Fixtures - Stock Stick Out resets when changing Rotation Angle
Implemented.
Fixed.
Fixed.
67078 Part Modeler - File Open - Inventor file opens with no holes
67091 Index to an associative CPL that gets realigned loses the associative On
Fixed.
Fixed.
Works as designed.
Fixed.
Fixed.
Fixed.
67111 Workflow - "Error in cross referencing part file" when saving file (database
Not reproducible.
related)
67114 Live Job Reports - translated version crash when selecting a job.
67124 EWS - Solids with failing ews solid ops are not displayed correctly in
workflow
Fixed.
Fixed.
Title
Release Notes
Fixed.
67154
67173
67185
67187
Fixed.
Fixed.
Advice given.
Fixed.
Fixed.
Fixed.
Sentinel RMS network licensing over VPN is not officially supported.
67239 Edgecam File Load - Does not consider if Load Sheet Bodies is checked or not Fixed.
67261 Auto Align Off - Loading .sldprt parts display wrong face coordinates position Fixed.
67262
67267
67270
67278
67312
67313
67321
67362
67370
67373 PEPS Wire - Simulation needs to show Cutting Wire parallel to the Wire
feature
78129 Migrate Tool - Migration fails when previous installation uses "User
Documents" and the new one uses "Public Documents"
78131 Live Job Reports - Does not run without firewall
78213 Profiling - Rapid moves simulated as resolved movement in profiling cycle
78276 Review Toolkit - Fails silently with {} on name of toolkit
78314 User Interface - Add possibility to make 2D Snap and 2D chain modal
78320 SIMSDK - Geometric Model for Profile Stock - two simulation elements for
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Implemented.
Fixed.
Fixed.
Implemented.
Fixed.
Fixed.
Fixed.
Fixed.
Fixed.
The 2D snap and chain are not modal but are explicitly set by the
command.
Fixed.
from right-click
78414 Workflow strategies - for finish turn cycle the safe distance is set to 1 for
Fixed.
Fixed.
Fixed.
Fixed.
created
78491 Workflow - Make Planning Board stop popping up when not necessary
Fixed.
78494 Launcher - Crashes when removing a .mdv file from comms recent files list
Fixed.
78495 Reload Solid doesn't return DONE when called from PCI
Fixed.
78504 Workflow - Load part with CAD-Link opens wrong customized ribbon
Fixed.
78535 Workflow Strategies - Z Offset conditions for roughing must consider nested Roughing issue fixed - separate task raised 79066 nested pocket base.
through pockets
78670 User Interface - Resets system tolerance if using comma as Decimal symbol
Fixed.
Implemented.
78720 Hole Cycle - canned cycle parameters do not reflect cycle when feature was
Fixed.
Improved documentation.
The pmod file is corrupt and we cannot ascertain how it became
corrupted.
Title
Release Notes
helix
workflow strategies - nested pocket base is not finished
Workflow Fit Stock - Cancel causes undo to latest command
Template TNC - remove #TABLE incorrect logic
Cannot connect to toolstore Error when running strategy on client's PC
Fixed.
Fixed.
Unwanted ;CODE: lines removed.
Fixed.
Fixed.
Fixed.
Fixed.
License
79434 Live Job Reports - Investigate database that images don't go to the pages
Fixed.
Implemented.
Coincident command should be used.
Fixed.
Fixed.