Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Manual
General Information
Components
ChromaBase - Basecolor, K
Basemaker 7160S - Low Temp, 7175S - Mid Temp, 7185S - High Temp, 7195S - Very High Temp
ChromaPremier Pro 14304S, 14305S and 14306S Activator
ChromaBase 7765S, 7775S, 7785Sand 7795S Activator-Reducer
ChromaPremier 12305S Activator
Spot Repair
Panel Repair
Overall Repair
60 F
Basemaker 7160S
Basemaker 7160S
Basemaker 7175S
70 F
Basemaker 7175S
Basemaker 7175S
Basemaker 7185S
80 F
Basemaker 7175S
Basemaker 7185S
Basemaker 7185S
90 F
Basemaker 7185S
Basemaker 7185S
Basemaker 7195S
Mix Ratio/Viscosity
Mix 1 part ChromaBase to 1 part Basemaker.
ChromaBase Basecoat should be activated with ChromaPremier Pro 14305S Activator for optimum performance and for
lifetime warranty. Mix basecoat with Basemaker at normal 1:1 ratio. Stir thoroughly, then activate: Add 1 ounce of
ChromaPremier Pro 14305S Activator to a ready-to-spray quart of ChromaBase, or add ounce of ChromaPremier Pro
14305S to a ready-to-spray pint of basecoat.
RTS Color
1 quart
1 pint
pint
Viscosity
15 - 17 seconds in a Zahn #2 (DuPon M-222) cup.
Tips for Success
Use mixing stick for accurate measurements.
Use activated basecoat within 2 hours for optimum performance.
Do not use activated basecoat after the 8-hour pot life.
Activate only what you intend to spray.
Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and The miracles of science
are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.
Not recommended.
Not recommended.
Not required; See Tips for Success.
Not recommended.
Tinting
Up to 5% with MasterTint mixing colors that are 6.0 VOC or below.
Clearcoats
ChromaPremier Pro 74500S and 74700S Clearcoats
ChromaPremier 72200S and 72500S Clearcoats
ChromaClear HC-7776S, 7400S, 7779S, 7900S, G2-4500S and G2-4700S Clearcoats
Plas-Stick 2370S Flexible Matted Clearcoat
ChromaClear LE 5100S, LE 5400S, LE 8300S and LE 8700S Clearcoats
Note: The technical data sheets for LE clears can be found in the Low VOC ChromaSystem Technical Manual
Application
Substrates
DuPont 222S Mid-Coat Adhesion Promoter
Plas-Stick 2340S Flexible Adhesion Sealer
DuPont 2510S, 2540S, 2570S, 2580CR DTM Epoxy Primer
ChromaPremier Pro 33430S 2K Premier Primer (alone or with Plas-Stick 2350S Flexible Additive)
DuPont 4004S 2K UltraProductive Primer-Filler
ChromaPremier 42410S, 42440S, 42470S Sealer (alone or with Plas-Stick 2350S Flexible Additive)
DuPont ChromaSurfacerTM 7701S, 7704S , 7707S 2K Urethane Primer-Filler (alone or with Plas-Stick 2350S Flexible Additive)
DuPont ChromaSeal 7710S, 7740S, 7770S 2K Urethane ValueShade Sealer (alone or with Plas-Stick 2350S Flexible Additive)
DuPont A-3130S UVA Primer-Surfacer
Properly sanded OEM finishes
Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and The miracles of science
are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.
Gun Setups*
Compliant
Siphon Feed:
Gravity Feed:
1.4 mm - 1.6 mm
1.4 mm - 1.5 mm
Siphon Feed:
Gravity Feed:
1.4 mm - 1.6 mm
1.4 mm - 1.6 mm
HVLP
Air Pressure
Compliant
Siphon Feed:
Gravity Feed:
Spot/Panel
30 - 40 psi @ the gun.
25 - 35 psi @ the gun.
Overall
45 psi @ the gun.
35 - 45 psi @ the gun.
HVLP
Application
Apply 2 - 3 medium coats until hiding and color match are achieved.
Flash/Dry Times
Air Dry
Flash between Coats
Flash before Clearcoat:
Flash before Tape:
Flash before Two-Toning:
Maximum Allowable Dry before Clearcoating:
Force Dry
5 - 10 minutes.
15 - 30 minutes.
30 minutes.
30 minutes.
24 hours.
Not recommended.
Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and The miracles of science
are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.
Recoatability/Re-repair
ChromaBase Basecoat may be recoated with itself within 24 hours.
Sanding
ChromaBase Basecoat dries to a smooth matte finish and should not be sanded. Nib sanding of small areas to remove dirt must
be followed by the application of more color before clearcoating.
Cleanup
Clean spray equipment immediately after use with DuPont Lacquer Thinner.
Physical Properties
Max VOC(LE/AP):
Avg. Weight Solids:
Avg. Volume Solids:
Avg. Weight per Gallon:
Avg. Weight Water:
Avg. Weight Exempts:
Flash Point:
Recommended
Dry Film Thickness:
Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and The miracles of science
are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.
5/2013
For more information, call
Jobbers: 1.800.3.DUPONT
Shops: 1.800.get DUPONT
In Canada: 1.800.668.6945
or visit
http://www.pc.dupont.com/
DuPont Low VOC Technical Manual
Available online
Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and The miracles of science
are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.