Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page
1 of 4
CP Number:
Purpose:
Attachments:
Prepared by:
Date:
Print Name
Signature
Checked by:
Date:
Print Name
Signature
Approved by:
Date:
Print Name
Signature
Legend
I
Action
Make Sure All Outgoing Motor Feeder are isolated and Padlocked
in Outgoing Cable Earthed Position.
Performed by
Time / Date
Page 2
Of 4
CP Number:
Purpose:
Attachments:
Prepared by: ( ATE / AEE )
Date:
Print Name
Signature
Date:
Print Name
Signature
Date:
Print Name
Step
6
Signature
Action
Confirm the Bus Tie A-B Breaker is Open and racked out in
Isolated position.
Confirm the Bus A is meggered with 5kV Megger and Record its
results.
R Y+B Grounded _______ Mohms
Y R+B Grounded _______ Mohms
B R+Y Grounded _______ Mohms
10
Confirm the Bus B is meggered with 5kV Megger and Record its
results.
R Y+B Grounded _______ Mohms
Y R+B Grounded _______ Mohms
B R+Y Grounded _______ Mohms
11
12
Performed by
Time / Date
Page 3
Of 4
CP Number:
Purpose:
Attachments:
Prepared by: ( ATE / AEE )
Date:
Print Name
Signature
Date:
Print Name
Signature
Date:
Print Name
Step
15
Signature
Action
16
17
18
On the Bus Tie Breaker Panel Lift the shutters of the Bus A side
and Measure the Phase & Line Voltages.
R-Y ____kV
Y-B ____kV
R-B ____kV
And Confirm the Voltages are same in the Bus A Voltmeter
19
Performed by
Time / Date
Page 4
Of 4
CP Number:
Purpose:
Attachments:
Prepared by: ( ATE / AEE )
Date:
Print Name
Signature
Date:
Print Name
Signature
Date:
Print Name
Step
20
Signature
Action
Rack in Bus Tie A-B circuit Breaker and CLOSE the Breaker from
TG Control Panel
21
22
Performed by
Time / Date
1.
2.
4.
5.
ADDITIONAL PRECAUTIONS:
6.
ISOLATE
I HEREBY CONFIRM THE EQUIPMENT DETAILED IN SECTION 3. ABOVE IS ISOLATED AND SAFE.
AEE:
/
Print Name
7.
Signature
ACCEPT
I HEREBY AGREE WITH AND ACCEPT THE ISOLATION THAT HAS BEEN PERFORMED ON THE EQUIPMENT
DETAILED IN SECTION 6.6 ABOVE AND ACKNOWLEDGE THAT I UNDERSTAND THE LIMITS OF THE ISOLATION.
CP HOLDER:
/
Print Name
8.
Signature
/
Date & Time
WORK COMPLETE
THE SCOPE OF WORK ASSOCIATED WITH THIS ELECTRICAL ISOLATION CERTIFICATE IS COMPLETE AND
THE WORK AREA IS IN A CLEAN AND SAFE CONDITION.
CP HOLDER:
/
Print Name
9.
/
Date & Time
Signature
DE-ISOLATION
THE ISOLATIONS AND EARTHING POINTS HAVE BEEN REMOVED. THIS CERTIFICATE IS CANCELLED.
AEE:
/
Print Name
Signature
/
Date & Time
Appendix 7: HV CHECKLIST
INSTRUCTIONS:
1.
2.
AEE to attach the completed checklist to the original copy of the electrical Isolation certificate
AEE TO
MARK N/A
OR INITIAL
2.
3.
4.
5.
CTs SHORTED
6.
7.
8.
9.
10.
2.
3.
4.