Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
speed, You may find the detailed description of the procedures below.
UGW also supports QOS-upgrade when acting as GGSN
IE
QoS-Upgrade
Service Model
Signaling Procedure
Service Model
When a user modifies the subscription data, the HSS initiates subscribed QoS
modification.
Signaling Procedure
MME:
M1
S-GW:
S1; S2; S3; S4
P-GW:
P1; P2; P3; P4; P5
The HSS sends the Insert Subscriber Data message to the MME. The
message contains IMSI and Subscription Data. The Subscription Data
includes EPS subscribed QoS (QCI, ARP) and the subscribed UE-AMBR and
APN AMBR.
The MME updates the stored subscription data and returns the Insert
Subscriber Data Answer message to the HSS. The message contains IMSI.
Optional: If only the subscribed UE-AMBR has been modified, the MME
calculates a new UE-AMBR value and may then signal a modified UE-AMBR
value to the eNB by using S1-AP UE Context Modification Procedure. The
HSS Initiated Subscribed QoS Modification Procedure ends after
completion of the UE Context Modification Procedure.
The S-GW sends the Modify Bearer Command message to the P-GW. The
message contains EPS Bearer Identity, EPS Bearer QoS, and APN AMBR.
NOTE:
The PCRF may modify the APN-AMBR and the QoS parameters (QCI and ARP)
associated with the default bearer in the response to the PDN GW.
7
If the QCI and/or ARP parameter(s) have been modified, steps 4 to 10,
as described in PDN GW initiated bearer modification with bearer QoS
update, are invoked.
If neither the QCI nor the ARP have been modified, but instead only the
APN-AMBR was updated, steps 4 to 8, as described in PDN GW initiated
bearer modification without bearer QoS update, are invoked.
The S-GW sends the Update Bearer Response message to the P-GW to
confirm the bearer modification. The message contains EPS Bearer
Identity. If the bearer modification fails, the P-GW deletes the
concerned EPS Bearer.