Sei sulla pagina 1di 5

Acartool Aliexpress Store No.

1391553

Acartool wireless car remote code decoder scanner 315mhz 433mhz auto remote frequency
receiver copier

Acartool Product Information


Description
car remote code scanner copier
Working frequency range: 315Mhz 433mhz
Support code type:
Remote Control Code Scanner is only for fixed code remote key, not for rolling code
remote key.
Application

Acartool Aliexpress Store No.1391553

Car key remote control Wireless Remote Key/Code Scanner Detect, receive, copy car
remote control signals, then command the car as freely as the cars owner
Remote Control Code Copier receives the signal sent by the fixed code anti-theft
system, save and copy the masters remote control signal
Effective distance
The effective distance is 500 metres
Save thirty remote control signals Decodability chip:
PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014
Pictures
315mhz and 433mhz wireless Remote control Detector & Duplicator car key remote
control receiver scanner

Details
car remote code scanner

Acartool Aliexpress Store No.1391553

Package:
1pc x 315mhz remote control scanner
1pc x 433mhz remote control scanner
Operating frequency: 315MHz 433Mhz
The effective distance is 500 metres Save thirty remote control signals
Decodability chip: PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014
Input voltage: 9V
Operating Current: 18mA
Operate Instruction
The machine uses a dedicated 9V power supply, switch on the left side, after booting,
it will show English " Remote control Decode the tool ". The machine operates at a
frequency of 305-433mhz. There are six keys--A, B, C, D, E, F. All feature set is
completed by these six keys, the A-D key is the former group function, E, F keys are
the latter function.
Notice: when install the batteries, ensure "+" to "+" and "-" to "-" to make it is
possible to supply power for the machine
Specific operation instructions
A.Press any key to do setting after booting, in the general case each receives a signal,
there will be two lines CAPION on the LCD panel, the first line before eight digital is
the address of the received signal, after four is data bits, the second line is before three
number is oscillation resistance, followed by four number is the chip type (received
signal can be generated by remote control, infrared magnetic door)
1. when received signal, directly press A or B or C or D can change the received
signal data and laun-ch out
2. when receiving the signal, press the F key, In a lower place of the LCD display
show *, the machine keep the last time received signals, and refused to accept any
other signal. We can change the signal data bits via A, B, C, D key and press E key to
laun-ch out the modified encoding
B.Scan Function: when a set of normal use anti-theft host missing accessories, you
can use the machine to scan for the coding, then made remote control and other

Acartool Aliexpress Store No.1391553

accessories for it.


Specific operation as follows:
Press E key after booting, at the bottom right of the LCD display appears 1.2M*,
means the testing vibration resistance value is 1.2M ohm, press the F key can change
the oscillation resistance value, optional respectively is 1.8M, 2.2M, 3.3M, 4.7M.
After confirmed the vibration resistance value, must provide the data bits, choose any
key from A, B, C, D, press E to start scan. Normal band all the scan is complete need
to 10 minutes, LCD screen first line before 8 numbers is changing to scan address
bits, the second line the front changing information is scan times. When scanning to
the encoding of the anti-theft host, the host will make a sound, scanning continues to
forward, we press F key, the machine backward scan, also will slow down, when
heard the host sound again, press the E key and hold for more than 2 minutes the let
go, at this time, the appears address bits is the address code of the anti-theft
host(Note: The base operating less skilled, address bits may also scan backward one
or two more bits, you need to use "every three into one" method on the basis of the
address code plus one or two, you can first scan to the address bits then record it by
pen, and then every three into one on the basis of the record address bits, all = 010
010 + 1 = 011 12010122 + 1 = 12012200 And by this analogy, you can get the real
address of the address bits encoding) to determine if the encoding is correct, use
below "c" function to self test encoding.
C.Optional encoding function: it is a test method used when not sure about the
address bits.
Specific operation as follows:
Press E key after booting, it will appears the same interface with " B" scan function,
press F to select the appropriate oscillation resistor value, and then press the E key
again, on the right of the resistance value appears one "+" sign, at the top left appears
eight address code flashing point, press one or two keys to increase or decrease the
value. Press A or B to increase or reduce value, pree C or D to move left and right,
press E again can launch out.
D. Storage Function
1. In the boot state, each receiving a wireless signal, press the "E" key to store.
2. Press A and B at same time, when Lcd display appears " S " sign, press E can call
up the stored coding sequence.
With the Progressive press "1" and "2" key to display "S" symbol, press the "5" key to
successively call up the stored encoding, press "A" or "B" or "C" or "D" to laun-ch

Acartool Aliexpress Store No.1391553

out the encoding.


3. Forwarding function: Press C and D at same time, when appears "1" sign can
activate the forwarding function. Tthe display appears "/\" sign when receiving an
unknown code, press the "F" key forwards, press the "E" key to exit. If known
received encoded chip, it will not be forwarded.
Note: LCD display show *, the machine refuse to accept any other signal. When you
press the F key, the * disappear and you can receive the signal again.

Potrebbero piacerti anche