Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SNAPLOCK
Couplings are
applicable to almost any
industry that uses liquids,
powders or gases.
OIL DISTRIBUTION
In many countries, Cam &
Groove couplings are the
standard connection for hoses
used in the delivery of fuel to
service stations and domestic
premises. No tools are needed to
make the connection and the risk
of cross threading is avoided.
CONTENTS
Applications
Technical Information
How the coupling works?
Technical Information
Working Pressures
Materials of Construction
Adapters: weights, part #
Couplers: weights, part #
Spare Parts
Dimensions
Ordering Information
AGRICULTURE
SNAPLOCK polypropylene couplings are
resistant to most acids
and are ideal as hose
connections on agricultural sprayers to save
time during refilling
of tanks.
CLEANING
Many industrial cleaning
products require hoses. In
this example, the hoses
can easily be disconnected
for storage to facilitate
transport or for removal in
the event of a blockage
occurring.
PUMP CONNECTIONS
SNAPLOCK couplings are widely used at
the inlet & outlet connections of pumps. Here,
couplings are removing oil from the waters
surface in an oil spill skimming system.
2, 11
3
3
3
3
4
5-6
7-8
9
10
12
DRUM FILLING
Here the coupling is incorporated in a system
allowing for rapid filling of
chemical drums.
SNAPLOCK couplings are
suitable for suction, delivery
and vacuum service.
MILITARY
Per the US military spec
MIL-C-27487
(A-A-59326), these
couplings are widely used
by NATO forces throughout the world to facilitate
rapid tactical deployment.
Aluminum, anodized
couplings to the full spec
can be supplied.
SNAPLOCK COUPLINGS
Technical Information
How the coupling works
SPECIFICATIONS
The standard for cam action couplings has traditionally been based on the US Military
Specification, MIL-C-27487, which laid down the casting method, materials, dimensions,
tolerances, pressure ratings and inspection procedures. MIL-C-27487 guaranteed
interchangeability of products. MIL-C-27487 has now been declared obsolete, and
replaced by a new US Federal standard A-A-59326. It is easy to reduce the cost of
couplings by not machining adaptors, reducing wall thickness or by using casting methods
not approved by the specification. However, the potential additional cost of this is possible
leakage, reduced life and costly down time. Our metallic couplings are manufactured
fully in accordance with the dimensions and tolerances of MIL-C-27487/A-A-59326 and
pressure-tested to three times the recommended working pressure, with polypropylene
being pressure tested to twice its working pressure to allow for surges in the line and give
enhanced safety. All couplings are supplied with locking feature as standard. Safety
clips may be inserted to lock handles to prevent disconnection during product
transfer.
All descriptive matter, illustrations, dimensions and weights issued in this brochure are for guidance
only and cannot be held as binding in any way. We reserve the right to change specifications and
other information included in this brochure without any prior notice. We recommend that you contact
us to be sure that the information you have is current. All information given in this brochure has been
carefully compiled and thoroughly checked. However, no responsibility for possible errors or
omissions can be assumed.
- 2
5- 6
Brass
Aluminum
Stainless Steel 316
Polypropylene
150
150
150
75
250
250
250
100
150
150
225
-
125
125
200
50
100
100
100
-
75
75
100
-
6 with
(4) handles*
150
150
200
-
Note: The working pressures shown above are given for ambient temperatures using elastomeric seals.
Higher temperatures and/or PTFE seals will reduce the pressure rating of the coupling. In the case of
polypropylene the maximum working temperature is 158F and at this temperature, the working
pressures above must be reduced by 40%.
*A four-handle high-pressure Coupler is available for some 6 parts.
CERTIFICATION
Full material certification is available if requested at the time of order. However, as most
parts are made for stock, contracts requiring certification will be subject to special
quotation and extended delivery.
designed to minimize
turbulence in gases, fluids and
abrasion from dry products at
the point of connections.
THREADS
Standard SNAPLOCK couplings when fitted to nipples are designed to seal on the thread.
The male thread is therefore NPT and the female thread is also NPT.
SNAPLOCK COUPLINGS
Technical Information
MATERIALS AND SIZES
Coupling Body
Size
Material
Brass
Aluminum
Stainless Steel 316
Polypropylene
Aluminum Couplings are gravity cast, except for size 5 which is sand cast.
Brass Couplings are either sand cast or forged.
Stainless Steel 316 Couplings are investment cast and may be electro-polished for sanitary applications, if required.
Polypropylene Couplings are manufactured from acid-resistant, glass-reinforced polypropylene.
HANDLES
Size
Material
SS 316 (standard)
Brass
Locking (Brass)
Nylon
Handles: Stainless Steel: for SS 316 & Polypropylene couplings. Brass: for Aluminum & polypropylene couplings.
Pull Rings (fitted to all sizes): Stainless Steel for SS316 couplings. Brass: for Aluminum & polypropylene couplings.
GASKETS
Size (inch)
Material
Buna N
EPDM
Viton
PTFE/Buna N
Filler
PTFE/Viton
Filler
FEP
Encapsulated
Sanitary
Temp
Range F
-40/+212
Marking/Stripes
-40/+250
Please contact us
Please contact us
+5/+400
Please contact us
-40/+225
Please contact us
-40/+225
Please contact us
-40/+250
Please contact us
-40/+212
Please contact us
Please contact us
Silicone
-58/+212
Please contact us
Neoprene
Standard gasket materials for metallic couplings are Buna N; and for polypropylene, EPDM
SNAPLOCK
Cam Adapters
Nominal
Size
inch
mm
Brass
Wt.
Lbs
Aluminum
Wt.
Lbs
Stainless
Steel 316
Wt.
Lbs
Polypropylene
Wt.
Lbs
A050-SS
A075-SS
A100-SS
A125-SS
A150-SS
A200-SS
A250-SS
A300-SS
A400-SS
A500-SS
A600-SS
0.13
0.29
0.28
0.58
0.79
1.11
2.43
2.22
4.14
5.94
6.62
A050-P
A075-P
A100-P
A125-P
A150-P
A200-P
A300-P
-
0.05
0.04
0.08
0.07
0.13
0.22
0.40
-
F050-SS
F075-SS
F100-SS
F125-SS
F150-SS
F200-SS
F250-SS
F300-SS
F400-SS
F500-SS
F600-SS
0.24
0.39
0.57
0.96
1.29
2.02
2.75
4.31
7.33
8.89
10.38
F050-P
F075-P
F100-P
F125-P
F150-P
F200-P
F300-P
-
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
A050-B
A075-B
A100-B
A125-B
A150-B
A200-B
A250-B
A300-B
A400-B
A500-B
A600-B
0.13
0.30
0.27
0.57
0.86
1.12
2.19
2.45
4.40
6.18
9.17
A050-A
A075-A
A100-A
A125-A
A150-A
A200-A
A250-A
A300-A
A400-A
A500-A
A600-A
0.04
0.10
0.14
0.25
0.27
0.36
0.50
0.68
1.38
2.16
2.37
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
F050-B
F075-B
F100-B
F125-B
F150-B
F200-B
F250-B
F300-B
F400-B
F500-B
F600-B
0.25
0.45
0.55
0.98
1.30
1.69
2.72
3.13
7.77
9.13
10.19
050-A
075-A
100-A
125-A
150-A
200-A
250-A
300-A
400-A
500-A
600-A
0.08
0.13
0.18
0.33
0.34
0.69
1.02
1.30
2.11
2.86
3.22
0.06
0.06
0.12
0.12
0.19
0.23
0.54
-
Notes:
Parts in italics are not normally in stock. Please check with us for availability.
metallic couplings have one handle. Also a true body is not compatible with other manufacturers using a body
and end.
On polypropylene parts, the size has a body and the standard 1 size has a 1 body. Handles, gaskets, dust plugs
and caps are therefore and 1 respectively. The size 1 size with 1 body is also available.
SNAPLOCK
Cam Adapters
Nominal
Size
inch mm
Brass
Wt.
Lbs
Aluminum
Wt.
Lbs
Stainless
Steel 316
Wt.
Lbs
Polypropylene
Wt.
Lbs
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
E050-B
E075-B
E100-B
E125-B
E150-B
E200-B
E250-B
E300-B
E400-B
E500-B
E600-B
0.18
0.41
0.49
0.97
1.23
1.72
2.77
3.93
6.70
11.09
13.81
E050-A
E075-A
E100-A
E125-A
E150-A
E200-A
E250-A
E300-A
E400-A
E500-A
E600-A
0.06
0.14
0.18
0.32
0.49
0.72
1.03
1.52
2.40
3.61
5.04
E050-SS
E075-SS
E100-SS
E125-SS
E150-SS
E200-SS
E250-SS
E300-SS
E400-SS
E500-SS
E600-SS
0.19
0.33
0.50
0.92
1.42
1.98
2.75
3.91
6.04
10.3
13.8
E050-P
E075-P
E100-P
E125-P
E150-P
E200-P
E300-P
-
0.05
0.05
0.08
0.17
0.20
0.28
0.59
-
DP050-SS
DP075-SS
DP100-SS
DP125-SS
DP150-SS
DP200-SS
DP250-SS
DP300-SS
DP400-SS
DP500-SS
DP600-SS
0.16
0.23
0.35
0.68
0.92
1.39
1.13
2.24
4.00
5.94
8.36
0.05
0.05
0.08
0.11
0.17
-
Retaining chains
are available
please see page 9.
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
DP050-B
DP075-B
DP100-B
DP125-B
DP150-B
DP200-B
DP250-B
DP300-B
DP400-B
DP500-B
DP600-B
0.21
0.34
0.34
0.70
0.63
0.85
1.72
2.09
4.47
6.27
6.81
DP050-A
DP 075-A
DP 100-A
DP 125-A
DP 150-A
DP 200-A
DP 250-A
DP 300-A
DP 400-A
DP 500-A
DP 600-A
0.07
0.11
0.13
0.22
0.27
0.42
0.62
0.68
1.30
2.05
2.19
DP075-P
DP100-P
See note below
DP150-P
DP200-P
DP300-P
-
Notes:
Parts in italics are not normally in stock. Please check with us for availability.
metallic couplings have one handle. Also a true body may not be compatible with other manufacturers using a
body and end.
On polypropylene parts, the size has a body and the standard 1 size has a 1 body. Handles, gaskets, dust plugs
and caps are therefore and 1 respectively. Size 1 with 1 body is also available.
SNAPLOCK
Couplers
Nominal
Size
inch
mm
Brass
Wt.
Lbs
Aluminum
Wt.
Lbs
Stainless
Steel 316
Wt.
Lbs
Polypropylene
Wt.
Lbs
0.32
0.58
0.80
1.39
1.71
2.16
2.73
4.02
5.79
8.69
14.99
D050-P
D075-P
D100-P
D125-P
D150-P
D200-P
D300-P
-
0.10
0.10
0.30
0.35
0.35
0.44
0.75
-
B050-P
B075-P
B100-P
B125-P
B150-P
B200-P
B300-P
-
0.08
0.08
0.28
0.35
0.55
0.66
1.00
-
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
D050-B
D075-B
D100-B
D125-B
D150-B
D200-B
D250-B
D300-B
D400-B
D500-B
D600-B
0.36
0.68
0.77
1.56
1.54
1.76
4.03
4.11
7.03
11.29
16.73
D050-A
D075-A
D100-A
D125-A
D150-A
D200-A
D250-A
D300-A
D400-A
D500-A
D600-A
0.14
0.22
0.38
0.79
0.79
1.01
1.37
1.83
3.25
4.20
4.46
D050-SS
D075-SS
D100-SS
D125-SS
D150-SS
D200-SS
D250-SS
D300-SS
D400-SS
D500-SS
D600-SS
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
B050-B
B075-B
B100-B
B125-B
B150-B
B200-B
B250-B
B300-B
B400-B
B500-B
B600-B
0.33
0.52
0.95
1.49
1.52
1.73
3.27
3.99
6.35
9.53
12.21
B050-A
B 075-A
B 100-A
B 125-A
B 150-A
B 200-A
B 250-A
B 300-A
B 400-A
B 500-A
B 600-A
0.13
0.24
0.39
0.71
0.80
0.91
1.33
1.80
2.33
3.28
4.12
B050-SS
B075-SS
B100-SS
B125-SS
B150-SS
B200-SS
B250-SS
B300-SS
B400-SS
B500-SS
B600-SS
0.29
0.51
0.76
1.30
1.57
2.05
2.97
3.89
5.14
7.99
11.81
Note:
Parts in italics are not normally in stock. Please check with us for availability.
SNAPLOCK
Couplers
Nominal
Size
inch
mm
Brass
Wt.
Lbs
Aluminum
Wt.
Lbs
Stainless
Steel 316
Wt.
Lbs
Polypropylene
Wt.
Lbs
0.33
0.56
0.86
1.36
1.67
2.33
3.05
4.70
6.59
10.20
15.97
C050-P
C075-P
C100-P
C125-P
C150-P
C200-P
C300-P
-
0.08
0.08
0.28
0.35
0.54
0.66
1.00
-
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
C050-B
C075-B
C100-B
C125-B
C150-B
C200-B
C250-B
C300-B
C400-B
C500-B
C600-B
0.37
0.61
1.06
1.56
1.88
2.93
3.72
5.43
6.86
12.63
15.99
C050-A
C075-A
C100-A
C125-A
C150-A
C200-A
C250-A
C300-A
C400-A
C500-A
C600-A
0.13
0.24
0.40
0.83
0.84
1.18
1.40
2.14
3.07
4.07
6.16
C050-SS
C075-SS
C100-SS
C125-SS
C150-SS
C200-SS
C250-SS
C300-SS
C400-SS
C500-SS
C600-SS
0.32
0.54
0.91
1.28
1.38
1.60
3.05
3.43
5.47
9.68
13.53
DC050-A
DC 075-A
DC 100-A
DC 125-A
DC 150-A
DC 200-A
DC 250-A
DC 300-A
DC 400-A
DC 500-A
DC 600-A
0.13
0.19
0.37
0.68
0.75
0.88
1.17
1.25
1.94
3.54
5.61
DC050-SS
DC075-SS
DC100-SS
DC125-SS
DC150-SS
DC200-SS
DC250-SS
DC300-SS
DC400-SS
DC500-SS
DC600-SS
*Retaining chains
are available please see page 9.
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
DC050-B
DC075-B
DC100-B
DC125-B
DC150-B
DC200-B
DC250-B
DC300-B
DC400-B
DC500-B
DC600-B
0.28
0.28
0.68
1.19
1.46
1.82
2.35
3.50
4.88
7.72
11.2
DC075-P
DC100-P
See note below
DC150-P
DC200-P
DC300-P
-
0.08
0.20
0.52
0.57
1.04
-
Dust Caps with Locking handles are also available. These handles may be padlocked for security.
Notes:
Parts in italics are not normally in stock. Please check with us for availability.
On polypropylene parts, the size has a body and the standard 1 size has a 1 body. Handles, gaskets, dust plugs
and caps are therefore and 1 respectively. Size 1 with 1 body is also available.
SNAPLOCK
Spare Parts
SPARE GASKETS
Size
inch
mm
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
Buna
EPDM
Viton
Neoprene
G050-B
G075-B
G100-B
G125-B
G150-B
G200-B
G250-B
G300-B
G400-B
G500-B
G600-B
G050-E
G075-E
G100-E
G125-E
G150-E
G200-E
G250-E
G300-E
G400-E
-
G050-V
G075-V
G100-V
G125-V
G150-V
G200-V
G250-V
G300-V
G400-V
G500-V
G600-V
G050-N
G075-N
G100-N
G125-N
G150-N
G200-N
G250-N
G300-N
G400-N
G500-N
G600-N
Food
Quality
Neoprene
G075-NF
G100-NF
G125-NF
G150-NF
G200-NF
G300-NF
-
Weight
Lbs
0.004
0.006
0.008
0.011
0.013
0.020
0.024
0.033
0.055
0.077
0.099
SPARE GASKETS
Size
inch
mm
1
1
1
2
2
3
4
5
6
13
19
25
32
40
50
65
75
100
125
150
PTFE
with
Buna
Filler
G050-T
G075-T
G100-T
G125-T
G150-T
G200-T
G250-T
G300-T
G400-T
G500-T
G600-T
PTFE
with
Viton
Filler
G100-TV
G125-TV
G150-TV
G200-TV
G300-TV
-
FEP
Encapsulated
Silicone
G075-TT
G100-TT
G125-TT
G150-TT
G200-TT
G300-TT
G400-TT
-
G075-S
G100-S
-
Brass
Handle
Wt.
Lbs
Stainless
Steel
Handle
Wt.
Lbs
Pin
Wt.
Lbs
Ring
Wt.
Lbs
-
1
1-2
3-4
5
6
H050-BR
H100-BR
H200-BR
H300-BR
H300-BR
H600-BR
0.024
0.048
0.146
0.185
0.185
0.561
H050-SS
H100-SS
H200-SS
H300-SS
H300-SS
H600-SS
0.024
0.048
0.146
0.185
0.185
0.561
P050
P100
P200
P300
P500
P600
0.004
0.011
0.020
0.035
0.048
0.081
R050
R050
R200
R200
R200
R200
0.007
0.007
0.015
0.015
0.015
0.015
Brass
Wt.
Lbs
Stainless
Steel
Wt.
Lbs
8 200
12 300
CH1200-BR
0.042
CH800-SS
CH1200-SS
0.042
0.059
COUPLERS
A
Size
Dim
A
B
C
13
13
37
26
19
20
41
35
1
25
24
46
38
1
32
28
55
47
1
40
35
58
56
2
50
45
62
69
2
65
55
89
82
3
75
72
71
101
4
100
97
80
126
5
125
121
85
150
6
150
145
89
182
Size
Dim
A
B
C
E
G
13
13
56
26
37
19
21
59
35
41
1
25
25
68
38
45
1
32
28
78
47
54
1
40
36
81
56
58
2
50
45
87
68
62
2
65
55
101
79
69
3
75
72
103
101
71
4
100
96
118
126
79
5
125
124
127
150
82
6
150
151
121
181
78
Size
Dim
A
B
G
13
14
64
29
15
29
19
20
84
35
21
34
1
25
25
93
38
27
37
1
32
28
104
49
34
46
2
50
45
128
76
53
57
2
65
55
135
79
66
57
3
75
72
160
98
78
58
4
100
96
168
122
102
60
5
125
120
193
162
126
71
6
150
143
243
178
152
76
Size
Dim
A
B
D
E
G
13
36
27
19
38
25
1
25
46
34
1
32
53
41
2
50
63
49
2
65
68
53
3
75
66
52
4
100
70
54
5
125
75
53
6
150
88
90
Size
Dim
B
G
F
Size
Dim
A
B
C
E
1
25
25
60
40
39
59
1
32
30
70
51
46
70
1
40
36
74
57
47
80
2
50
46
81
68
54
89
2
65
56
87
82
57
105
3
75
73
90
98
59
121
4
100
101
100
124
61
150
5
125
121
102
152
63
180
6
150
141
108
181
68
220
13
14
47
39
19
19
54
54
1
25
23
62
60
1
32
30
68
80
1
40
36
72
81
2
50
47
79
89
2
65
60
87
105
3
75
72
91
90
4
100
100
99
148
5
125
123
103
175
6
150
150
113
220
13
10
73
15
31
39
19
13
87
21
35
54
1
25
19
97
27
40
60
1
32
26
104
33
46
79
2
50
43
125
53
53
97
2
65
56
136
68
56
105
3
75
66
160
76
58
121
4
100
90
170
103
62
148
5
125
106
187
130
65
175
6
150
144
256
155
66
220
13
43
39
19
46
54
1
25
52
59
1
32
60
70
2
50
70
89
2
65
73
105
3
75
78
121
4
100
90
150
5
125
105
180
6
150
113
220
C
1
40
36
110
58
40
49
DP
Size
Dim
B
E
19
21
53
34
35
54
E
Size
Dim
A
B
C
D
E
13
14
48
26
32
39
1
40
32
109
41
47
86
DC
1
40
55
41
1
40
63
80
13
149
103
19
157
111
1
25
180
140
1
32
235
182
1
40
245
189
2
50
254
200
2
65
267
211
3
75
311
248
4
100
340
276
5
125
368
305
6
150
487
419
NOTE: All dimensions are typical only. The precise dimension of parts will vary from material to material. If dimensions are critical
to an application, we strongly recommend that you contact us to obtain detailed information.
10
SOLIDS
TABLET PRESSES
For hygienic applications,
couplings can be electropolished and fitted with food
quality seals. The seals can
easily be removed for
steam cleaning.
FLEXIBILITY
SAFETY
VERSTALITY
SPEED
NO TOOLS
PROCESS
SNAPLOCK couplings are
particularly effective in
the rapid changing of lines
to mixing vessels in pilot
plants, saving time compared with flanged or
threaded fittings.
STORAGE
Cam & Groove couplings
are a standard option on
IBC containers to allow
rapid filling and emptying
even with aggressive
chemicals. Stainless Steel
or polypropylene couplings
are resistant to most acids
and corrosive solvents.
SNAPLOCK
Part
A: Female Adapter
B: Male Coupler
C: Hosetail Coupler
D: Female Coupler
E: Hose-tail Adapter
F: Male Adapter
DC: Dust Cover
DP: Dust Plug
AW: BW or SW Adapter
DW: BW or SW Coupler
FLA: Flanged Adapter
FLB: Flanged Coupler
H: Handle
P: Pin
R: Ring
SL: Anti-vibration Clip
G: Gasket
H: Handle
See pages 5-9
See page 9
See page 9
Notes: (1) This is a basic Figure Number Code System only. Not all combinations available.
(2) All Couplers and Adapters have standard NPT threads.
TO DETERMINE THE TYPE OF COUPLING FROM FIGURE NUMBER
Example: D-200-A-X-B = Female Coupler, size 2, Aluminum body, standard handle material, with Buna N gasket.