Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
9/30/2011 5:30:26 PM
A fully-integrated multi-fuel
energy center based on the
Efciency Plus concept, has
lowered energy consumption by
40% and cut CO2 emissions by
a third at our facility in Germany.
It demonstrates that tomorrows
energy objectives can be met
today with technology already
on the market.
9/30/2011 5:30:42 PM
2/ 3
9/30/2011 5:30:44 PM
3
5
Heating Boilers
9/30/2011 5:30:48 PM
4/ 5
In-house technical
support team
ESOP solar
simulation program
Mounting Systems
Pre-engineered corrosion-resistant
mounting systems for at and sloped
roof or wall installations provide maximum
security over the entire lifetime of your
system. Easy to assemble and designed
specically for Viessmann collectors.
Pre-Insulated Piping
Reduce installation time and save money
with our exible pre-insulated piping
systems. This all-in-one splitable twin-tube
system comes in corrugated stainless
steel or copper piping, c/w sensor wire
and high R-value insulation.
System Accessories
From leak-proof quick-connect ttings
to high-temperature solar expansion tanks
and solar glycol, all of our system accessories have been carefully sourced to build
the most reliable system on the market.
Flexible pre-insulated
piping systems
Complete
system accessories
9/30/2011 5:30:50 PM
VITOSOL 100-F
VITOSOL 200-F
High-performance at plate solar collectors
Rugged construction
Equipped with a high-efciency selective
surface coated one-piece absorber, impactresistant solar glass and non-degrading
thermal insulation, our at plate collectors
deliver solar energy efciently and reliably
year after year. High-quality materials such
as copper, stainless steel and aluminum
prevent corrosion and allow the collector
to weather the elements.
A tightly sealed one-piece wrap-around
aluminum frame provides excellent stability and durability. A clean, attractive look,
with no screws or rivets visible.
One-piece
aluminum frame
Impact-resistant
solar glass
Highly-selective
surface coated absorber
Low-prole frame
design
1
5
Versatile application
Vitosol at plate collectors are available
in vertical or horizontal versions and
can be installed on sloped or at roofs,
as a free-standing installation or on walls.
In commercial applications up to 12
collectors can easily be connected into
an array with quick-connect ttings.
Adaptable to virtually any requirement
and application, Vitosol at plate collectors
are the best t for solar hot water and
pool heating applications.
2
3
VITOSOL 100-F
VITOSOL 200-F
9/30/2011 5:30:54 PM
6/ 7
9/30/2011 5:30:58 PM
VITOSOL 200-T
VITOSOL 300-T
Premium vacuum tube solar collectors
High performance
Vacuum tube collectors achieve excellent
results not just year-round, but particularly
in cold and windy conditions. The collectors absorbers are located inside vacuum
tubes, which, much like a thermos, have
excellent insulating qualities and prevent
heat loss. Although vacuum tube collectors can be used in any solar application,
they provide best results in space heating
supplement systems or high-temperature
applications, such as solar cooling.
Serviceability
While the Vitosol 200-T and 300-T collectors are comparable from a performance
perspective, one advantage of the Vitosol
300-T is the dryconnection between
tubes and header, allowing individual tubes
to be installed after the system is lled and
under pressure; tubes are easily replaced
if required. Plus, the much lower collector
uid volume and stagnation temperature
of the 300-T collector help protect the
solar uid from overheating.
Versatility
No other collector offers as many mounting options as the Vitosol 200-T: vertical
or horizontal installation on sloped or at
roofs, facade or ground mounted, it is ideal
for architectural integration and a design
element for any building. In commercial
applications up to 150 tubes of the Vitosol
200-T, (up to 90 tubes of the Vitosol 300-T),
can easily be connected in series with
quick-connect ttings and easy-to-use
pre-engineered mounting systems.
6
2
3
4
4
5
5
VITOSOL 200-T
VITOSOL 300-T
9/30/2011 5:31:02 PM
8/ 9
9/30/2011 5:31:09 PM
2
6
3
5
Facade Mounting,
on Racks (200-F)
Facade Mounting,
Flush (200-T)
Free-standing
(100-F, 200-F, 300-T)
Best Choice
System Type
While all Viessmann collectors can be
used for essentially any application, it is
the temperature requirements of your
application and heat loss characteristics of
a specic collector that typically determine
which collector is most suitable.
In solar applications with low system
temperatures, such as high-volume DHW
or indoor pool heating, at plate and
vacuum tube collectors have comparable
performance levels. A at plate system
is typically recommended based on the
lower investment cost.
In medium-temperature applications
(residential DHW and combination space
heating), either collector type can be used.
While vacuum tubes provide a higher
output they also have a higher investment
cost. In process heat or solar cooling
applications requiring high system temperatures, vacuum tubes provide signicantly
higher performance and are the collector
of choice.
Good Choice
Type of Application
Low
Medium
Low
Medium-High
High
Vitosol 100/200-F
Flat Plate Collectors
Vitosol 200/300-T
Vacuum Tube Collectors
Percentage of energy covered by solar system. Low: 40 - 60%, typical commercial application. High: 60 - 80%, typical residential application.
9/30/2011 5:31:11 PM
10/ 11
Commissioning support
During the commissioning phase, our
network of in-eld representatives
provides assistance on-site, while our
in-house team is available for additional
technical support to make sure your solar
project gets off the ground as smoothly
as possible.
Building
Management
System
0 - 10 V / LON /
BACnet
Large-scale horizontal
Vitosol 200-F installation
Vitocontrol
Custom Control
Panel or External
Communication
Solar Thermal
Storage
Tank
Wood Fuel
Wood-Fired Boiler
up to 4268 MBH
Condensing Boiler
up to 3361 MBH
Fossil Fuel
Non-Condensing Boiler
up to 4387 MBH
9/30/2011 5:31:12 PM
Technical Specifications
SV1B
SH1B
Vertical
Horizontal
Gross area
f t. 2 / m2
27 / 2.5
27 / 2.5
Aperture area
f t. 2 / m2
25.1 / 2.33
25.1 / 2.33
in / mm
in / mm
in / mm
41.75 / 1 056
93.75 / 2 380
2.75 / 72
93.75 / 2 380
41.75 / 1 056
2.75 / 72
lbs / kg
96.8 / 43.9
96.8 / 43.9
Dimensions
(overall)
Width
Height
Depth
Weight
(incl. thermal insulation)
SV2A
SH2A
Vertical
Horizontal
Gross area
f t. 2 / m2
27 / 2.5
27 / 2.5
Aperture area
f t. 2 / m2
25.1 / 2.33
25.1 / 2.33
in / mm
in / mm
in / mm
41.75 / 1 056
93.75 / 2 380
3.5 / 90
93.75 / 2 380
41.75 / 1 056
3.5 / 90
lbs / kg
90.2 / 40.9
90.2 / 40.9
Dimensions
(overall)
Width
Height
Depth
Weight
(incl. thermal insulation)
Model
No. of tubes
f t. 2 / m2
Gross area
Aperture area
Dimensions
(overall)
Width
Height
Depth
Weight
(incl. thermal insulation)
SD2A, 3 m2
20
30
30.98 / 2.88
46.5 / 4.32
f t. 2 / m2
23 / 2.14
34.8 / 3.23
in / mm
in / mm
in / mm
55.75 / 1 418
80.5 / 2 043
5.5 / 143
83.75 / 2127
80.5 / 2043
5.5 / 143
lbs / kg
134.5 / 61
208 / 94.6
Model
No. of tubes
f t. 2 / m2
Gross area
Aperture area
Dimensions
(overall)
Weight
(incl. thermal insulation)
Width
Height
Depth
SP3, 3 m2
20
30
31 / 2.88
46.5 / 4.32
f t. 2 / m2
22.7 / 2.11
34.1 / 3.17
in / mm
in / mm
in / mm
55.75 / 1418
80 / 2031
5.5 / 143
83.75 / 2127
80 / 2031
5.5 / 143
lbs / kg
112 / 51
167 / 76
9/30/2011 5:31:20 PM
12/ 13
System Components
Model
Flow Meter
(setting range)
Max. number of
Vitosol-F collectors*
Max. number of
Vitosol-T tubes*
DN 25
0.1 to 4.0
1 to 15
0.1 to 6.0
1 to 23
18
150
270
Model
Flow Meter
(setting range)
USG/min
ltr/min
Max. number of
Vitosol-F collectors*
Max. number of
Vitosol-T tubes*
DN 20
DN 25
0.5 to 5
1 to 20
1 to 10
5 to 40
12
25
180
360
SCU
124
SCU
224
Vitosolic
200
Relay outputs
System congurations
10
15
Number of heat
loads (tanks)
CVA
CVB
EVI
EVB
42-120
79, 120
53-120
79, 120
Number
of models
Number
of coils
EnamelCoated
Steel
EnamelCoated
Steel
Stainless
Steel
Stainless
Steel
Model
Model
Capacity
(USG)
Construction
USG/min
ltr/min
DN 20
9/30/2011 5:31:30 PM
9/30/2011 5:31:33 PM
14/ 15
Efciency
Plus
Performance spectrum
9/30/2011 5:31:39 PM
Sales Center
Viessmann Manufacturing
Company Inc.
Langley, BC Canada
Tel. (604) 533-9445
Fax (604) 533-9439
www.viessmann.ca
9/30/2011 5:31:48 PM