Sei sulla pagina 1di 4

Thermostatic mixing valve

MMV-S for solar systems

designed specifically for SOLAR systems with continuous high temperatures


internal coating to prevent scale deposit
locking cap preventing the end user from adjusting the temperature
rapid shut-off of mixed water supply if either the hot or cold supply fails
(complies with EN1111 and EN1287).
simplified compact design and construction, ensures reliability, longevity and safety

TH E R MO S TA T I C MI X IN G V A LV ES

MM V - SOLAR

Application :
Thermostatic mixing valve are used in solar systems for the production of
domestic hot water.
In these systems the temperature of the water in the storage tank can vary
considerably depending on the season and the degree of solar radiation, and
can reach very high temperatures over long periods.
Especially in summer, and if there is little water usage, the hot water at the storage tank outlet can reach temperatures around 95C before the safety valve or
the pressure and temperature safety valve are actuated.
At these temperatures, the hot water cannot be used directly, because of the
scalding risk.

Features and benefits :


MMV-S has been designed specifically for systems
requiring high flow rates and can function continuously
at the high temperatures of the incoming hot water
from solar storage tank.
Wax thermostat technology for high temperature up
to 110C

Internal coating to prevent scale deposit


Locking cap preventing the end user from adjusting
the temperature.
Handwheel with set position (graduated scale Min to
Max - 5 setting positions)
Robust and low complexity construction providing
superior reliability, longevity and safety

Excellent temperature stability


Rapid shut-off of mixed water supply if either the hot
or cold supply fails (complies with EN1111 and
EN1287).

Range MMV-S
body 1 with G 1/2 male union threaded
body 1 with G 3/4 male union threaded
body 1 - DN 25 male threaded
body 1 with G 1/2 male union threaded
body 1 with G 3/4 male union threaded
body 1 - DN 25 male threaded

Cap
graduated scale
graduated scale
graduated scale
graduated scale
graduated scale
graduated scale

Finish
self colour brass
self colour brass
self colour brass
nickel plated
nickel plated
nickel plated

Specifications :
Temperature : accurate to within +/-2C of chosen
temperature (with balanced dynamic pressure).
Head loss under dynamic pressure at the mixer inlets
is shown by the curve.
Maximum static pressure : 10 bar.
Operating pressure : 0,2 to 5 bar.
Hot temperature supply : 52* - 110C, *differential
minimum hot/mix temperature must be 10C.

Cold temperature supply : 5 - 25C.


Temperature setting range : 30 to 65C.
Factory temperature setting 50C.
Flow rate at 3 bar : 63 l/min.
Flow mini : 5 l/min

Code ref.
97500
97501
97560
97530
97531
97561

T H E R M O S T A T I C MI X IN G V A LV E S

M MV - SOLAR

Installation :
MMV-S mixing valves must be installed in accordance with the application diagram here after and take into account all current applicable local standards and
code of practice.
MMV-S can be installed in any position, either vertical or horizontal.
Adjustment and commissioning :
The thermostatic controller is supplied factory pre set at 50C.
However, installation conditions will dictate, that the product be adjusted on site.
With both the hot and cold supplies turned fully on and the terminal fitting open,
adjust the temperature to the required setting.
To adjust the temperature supply :
Simply unscrew the locking screw on the top of the handwheel, lift the cap and
turn it to set the valve :
- To increase the temperature turn anti-clockwise.
- To decrease the temperature turn clockwise.
The temperatures and pressures must be stabilised and checked before commissioning (allow mixed water to
flow for 1 minute prior final setting). All parameters must be in accordance with the specifications of the valve.
NOTE : After adjustment replace the cap with the screw to lock the valve in position and prevent tampering.

Solar
application
Solar
application
Solar panel

1 mixing valve MMV-S


2 mixed water outlet

Hot water

3 safety valve

4
3
11

4 stop valve

5
1

5 controllable check-valve

4 11

6 pressure reducing valve

Mixed water

2
11

11

Hot water
tank

mixing valve MMV-C


mixed water outlet
safety valve
stop valve
controllable check-valve
pressure reducing valve
strainer
pump
hydraulic safety group
or sanitary safety valve
10 expansion vessel
11 temperature gauge

WATTS FLOW BOX

10

7 strainer

1
2
3
4
5
6
7
8
9

9
5

8 pump
9 hydraulic safety group or
sanitary safety valve
10 expansion vessel
11 thermometer

Cold
water

Solarapplication
applicationwith
withrecirculating
recirculating
loop
Solar
loop
Solar panel

1 mixing valve MMV-S

Hot water

2 mixed water outlet

5
1

3 safety valve

Mixed water

11

11

11

WATTS FLOW BOX

5
10

5 controllable check-valve
Cold water

5 5

Hot water
tank

4 stop valve

4 11
4

6 pressure reducing valve

7 strainer
mixing valve MMV-C
mixed water outlet
safety valve
stop valve
controllable check-valve
pressure reducing valve
strainer
pump
hydraulic safety group
or sanitary safety valve
10 expansion vessel
11 temperature gauge
1
2
3
4
5
6
7
8
9

4
Cold water

7
Cold water

8 pump
9 hydraulic safety group or
sanitary safety valve
10 expansion vessel
11 thermometer

TH E R MO S TA T I C MI X IN G V A LV ES

Materials
Body
Finish
Spring
Other brass parts
Piston
Internal coating
O-ring and seals
Head

MM V - SOLAR

brass DZR - CW602N


self colour brass or nickel plated
stainless steel
CW 614N
PSU (polysulfone polymer)
PTFE
EPDM
PA with glass fiber

Dimensions :

64,8

COLD
WATER

COLD
WATER

HOT
WATER

73

43

43

HOT
WATER

65

Male union threaded 3/4

Male union threaded 1/2

MIXED
WATER

MIXED
WATER

G 1/2"

G 3/4"
72

72

G 1/2"

G 3/4"

76

76
70,5

70,5

Male threaded DN 25

65

44

HOT
WATER

Flow rate : (Kv = 2,2)

43

COLD
WATER

MIXED
WATER

G 1"

G 1"

76

WATTS INDUSTRIES France


06, avenue Gustave Eiffel - B.P. 40339
28006 CHARTRES Cedex (France)
Tel. +33 (0)2 37 25 11 00 - Fax +33 (0)2 37 25 11 11
E-mail info@wattsindustries.fr
Site www.wattsindustries.com

Re-order no. 69(17)-UK-07/05

The photographs, illustrations and descriptions contained in this brochure are given for information only.
Watts Industries reserves the right to change the technical specifications or the design of these products without prior notice.

Potrebbero piacerti anche