Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Operation
Maintenance
Library
Product Section
Product
Model
Literature Type
Sequence
Date
TTV-IOM
Service Literature
Unitary
DX Fan Coil Unit
TTV
Installation / Operation / Maintenance
1
September 2003
Commercial
Air Cooled Split
Air Conditioners
-Indoor Units
Models
TTV250, TTV300
TTV400, TTV500
TTV600.
Since The Trane Company has a policy of continuous product improvement. A reserves the
right to change specifications and design without notice. The installation and servicing of the
equipment referred to in this booklet should be done by qualified experienced technicians.
Foreword
These instructions do not attempt to cover all variations in
systems, nor to provide for every possible contingency to be
met in connection with installation. Should further information
be desired or should particular problems arise which are not
Warranty
Warranty is based on the general terms and conditions of the
Trane Company. The warranty is void if the equipment is
repaired or modified without the written approval of the
manufacturer, if the operating limits are exceeded or if the
control system or the electrical wiring is modified. Damage
Reception
On arrival, inspect the unit before signing the delivery note.
Specify any damage on the delivery note, and send a registered
letter of protest to the last carrier of the goods within 72 hours
of delivery. Notify the local Trane Sales Office at the same
time. The unit should be totally inspected within 15 days of
delivery. If any concealed damage is discovered, stop,
unpacking the shipment. Take photos of the damage material
if possible. Notify the Carrier immediately by phone and
General Information
This manual covers the installation, operation and maintenance
of the Trane TTV DX Fan Coil. These new air handler models
are completely designed to incorporate a single slab coil
assembly, improved application flexibility, servicing and
maintenance accessibility and an improved accessory line.
TTVs are of the fully vertical discharge type. They are shipped
in the vertical position.
Handling
The unit will be supplied within shipping base and protective
packaging over the unit casing. The packaging should be kept
on the unit during handling or storage on site.
If it is necessary to remove the packaging for inspection prior
to completion of on site handling, retain packaging parts and
reapply them by tapping in position to prevent damage to the
casing. TTVs are supplied with a shipping base which is suitable
for handling by a fork lift truck. If it is necessary to sling the
unit, use spreader bars under the shipping base, ensure that
ropes do not cause abrasion to the surface of the unit.
(i)
Contents :
Page No.
3-4
Operation / Start - up
Maintenance
6-7
Dimensional Data
8 - 17
Wiring Diagram
18
( ii )
MODELNUMBERDESCRIPTION
T
1
T
2
V
3
2
4
5
5
0
6
A
7
D
8
0
9
1
10
A
11
0
12
A
13
0
14
0
15
D
16
MOTOR SIZE
STANDARD
OVER SIZE - 1
5 hp (3.7 kW)
7.5 hp (5.5 kW)
7.5 hp (5.5 kW) 10 hp (7.5 kW)
7.5 hp (5.5 kW) 10 hp (7.5 kW)
10 hp (7.5 kW)
15 hp (11 kW)
15 hp (11 kW)
20 hp (15 kW)
OVER SIZE - 2
10 hp (7.5 kW)
15 hp (11 kW)
15 hp (11 kW)
20 hp (15 kW)
---------------
General Data
UNIT MODELS
POWER CONNECTION
MCA1
SYSTEM DATA
Refrigerant Type
Refrigerant Connection Type
Suction Line OD
Liquid line OD
Indoor Unit
TTV250
TTV300
TTV400
TTV500
TTV600
V/ph/Hz
380-415/3/50
380-415/3/50
380-415/3/50
380-415/3/50
380-415/3/50
9.4
14.6
14.6
18.2
26.6
in (mm)
in (mm)
R22
Brazed
2 1/8 (53.98)
5/8 (15.88)
R22
Brazed
1 5/8 (41.28)
7/8 (22.23)
R22
Brazed
2 1/8 (53.98)
1 1/8 (28.58)
R22
Brazed
2 1/8 (53.98)
1 1/8 (28.58)
R22
Brazed
2 1/8 (53.98)
1 1/8 (28.58)
16.7 (1.55)
3/8 (9.53)
3
12
Expansion Valve
1 1/4 (31.8)
19.2 (1.78)
3/8 (9.53)
3
12
Expansion Valve
1 1/4 (31.8)
25.6 (2.38)
3/8 (9.53)
3
12
Expansion Valve
1 1/4 (31.8)
34.8 (3.24)
1/2 (12.7)
4
12
Expansion Valve
1 1/4 (31.8)
38.0 (3.53)
1/2 (12.7)
4
12
Expansion Valve
1 1/4 (31.8)
Centrifugal FC
1
15.7 (400)
12.6 (320)
Belt and Pulley
9
828
1,100
Centrifugal FC
1
15.7 (400)
12.6 (320)
Belt and Pulley
10
870
1,100
Centrifugal FC
2
15.4 (390)
15.4 (390)
Belt and Pulley
11
923
1,200
Centrifugal FC
2
17.7 (450)
14.2 (360)
Belt and Pulley
13
725
1,000
Centrifugal FC
2
17.7 (450)
14.2 (360)
Belt and Pulley
13
780
1,000
7,760 (13,180)
8,900 (15,120)
5,900 (10,000)
9,240 (15,700)
10,600 (18,000)
7,000 (11,890)
12,120 (20,590)
13,800 (23,445)
9,100 (15,460)
15,130 (25,700)
16,700 (28,370)
11,000 (18,690)
18,080 (30,720)
21,800 (37,040)
14,400 (24,465)
1
5 (3.7)
7.5 (5.5) / 10 (7.5)
1
1
5
1
7.5 (5.5)
10 (7.5) / 15 (11)
1
1
6
1
10 (7.5)
15 (11) / 20 (15)
1
1.2
6.5
1
15 (11)
20 (15)
1
1.2
7
7.5/53.5
11.64/93
14.53/116
21.25/168
in
Washable
8
16 x 20 x 1
Washable
9
4 - 15 x 20 x 1
2 - 16 x 20 x 1
1 - 16 x 25 x 1
2 - 15 x 25 x 1
Washable
9
6 - 16 x 25 x 1
3 - 20 x 25 x 1
Washable
12
2 - 16 x 20 x 1
6 - 16 x 25 x 1
1 - 20 x 25 x 1
3 - 25 x 25 x 1
Washable
9
3 - 20 x 20 x 1
6 - 20 x 25 x 1
mm
487 (1073)
685 (1510)
749 (1651)
COIL
Face Area
Tube Size OD
Rows
Fins per inch
Refrigerant Flow Control
Drain Connection Size
sq ft (m2)
in (mm)
in (mm)
FAN
Fan Type
No. used
Diameter
Width
Fixed Drive Type
Fan Pulley Pitch Diameter
Fan Speed - Std.(Factory set)
Max. Allowable
Airflow2
- Nominal
- Max.
- Min.
in (mm)
in (mm)
in
rpm
rpm
cfm (cmh)
MOTOR
Motor Type
No. of Motor
Motor hp - Std.
Hi Static
No. of Speed
ESP including filters
Motor Pulley Pitch Diameter
V/ph/Hz
RLA/LRA
hp (kW)
in.wg
in
TEFC
1
7.5 (5.5)
10 (7.5) / 15 (11)
1
1.2
7
380-415/3/50
11.64/93
FILTER
Type
No. used
Size (WxLxD) - Std.
DIMENSION (HxWxD)
Uncrated (Net)
WEIGHT
Uncrated (Net)
kg (lbs)
353 (778)
421 (928)
MCA - Minimum Circuit Ampacity ; calculated as follow : 125% of heater R.L Amps plus the fan motor R.L Amps.
2
CFM is rated with standard air-dry coil.
1
Unit Installation
TTV
WARNING:
Before preparing the unit for lifting, the center of gravity should
be determined for lifting safety. Because of the placement of
internal components, the unit weight may be unevenly
distributed.
Coll section
H
Drain plug
Electrical Connections
Filters
Air handlers are shipped with 1washable filters installed in
the unit. For filter dimensions, refer to page 2. Filters shall be
accessible from the front coil access panel. With ducted return
systems ensure sufficient access is given for filter change.
Optional side access filter rack allows side access and 2 filter
capability.
Duct Connections
The supply and return ducts should be connected to the unit
with flame retardant duct connectors and the use of flexible
connectors is recommended for all duct connections in order
to reduce vibration transmission. The return duct should be
sized to the same dimensions as the return inlet of the unit.
Operation / Start-Up
Preparation
Start-Up Procedures
Inspection Checklist
Duckwork connections are complete and insulated.
e. When the motor has been operated under load for a short
period of time, check that the operating current tally with
the nameplate current.
Maintenance
Change / Clean Filters
WARNING:
Monthly Inspection
Belt Maintenance
Clean fan belts and pullies with a dry cloth. Oil and grease
must be kept off belts. The use of a belt dressing is not
recommended. When replacing belts, use a matched set.
Do not force belts onto pullies, but adjust motor position to
allow mounting and then re-tighten.
Yearly Inspection
Span
Deflection
Earthed motor
Place one of the test leads of an insulation tester or megger
against bare metal and another on each of the motor terminals
in turn. The reading obtained should be in the range 2 megohm
to infinity. If the reading is substantially below this range an
earthed winding is indicated.
398+400+380 = 393V
3
Dimensional Data
DX Air Handling unit
TTV 250
588.5
1808
1774
507
588.5
750
RECOMMENDED
CLEARANCE
50
750
RECOMMENDED
CLEARANCE
1008
1040
507
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 1
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 20"
16" X 20"
16" X 20"
16" X 20"
16" X 20"
FAN
FILTER
1219
1167
16" X 20"
COIL
16" X 20"
COIL
16" X 20"
FILTER
13
TOP VIEW
MOTOR
232
342
512
622
861.5
REAR VIEW
SIDE VIEW
588.5
1808
1774
507
588.5
750
RECOMMENDED
CLEARANCE
269
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 2
507
1008
1040
16" X 20"
16" X 20"
16" X 20"
16" X 20"
FAN
1219
1167
16" X 20"
COIL
16" X 20"
FILTER
16" X 20"
COIL
16" X 20"
FILTER
13
TOP VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
MOTOR
232
REAR VIEW
342
512
622
861.5
SIDE VIEW
Dimensional Data
DX Air Handling unit
TTV 250
FAN ARRANGEMENT 3
1808
1774
507
633.5
633.5
750
RECOMMENDED
CLEARANCE
51
750
RECOMMENDED
CLEARANCE
FRONT
1008
1040
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 20"
16" X 20"
16" X 20"
16" X 20"
16" X 20"
FAN
FILTER
1219
1167
16" X 20"
FILTER
16" X 20"
COIL
16" X 20"
COIL
45
13
TOP VIEW
MOTOR
232
342
512
622
861.5
REAR VIEW
SIDE VIEW
FAN ARRANGEMENT 4
633.5
1808
1774
507
633.5
750
RECOMMENDED
CLEARANCE
51
750
RECOMMENDED
CLEARANCE
FRONT
1008
1040
16" X 20"
16" X 20"
16" X 20"
16" X 20"
1219
FAN
1167
16" X 20"
COIL
16" X 20"
FILTER
16" X 20"
COIL
16" X 20"
FILTER
13
246
TOP VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
MOTOR
232
REAR VIEW
342
512
622
861.5
SIDE VIEW
Dimensional Data
DX Air Handling unit
TTV 300
583.5
1808
1774
517
583.5
750
RECOMMENDED
CLEARANCE
50
750
RECOMMENDED
CLEARANCE
1008
1040
517
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 1
750
RECOMMENDED
CLEARANCE
COIL
REAR
15" X 20"
15" X 25"
16" X 20"
16" X 20"
16" X 25"
FILTER
1320
15" X 20"
COIL
15" X 25"
FILTER
15" X 20"
FAN
FILTER
13
15" X 20"
1372
COIL
TOP VIEW
MOTOR
232
342
512
622
861.5
REAR VIEW
SIDE VIEW
588.5
1808
1774
507
588.5
750
RECOMMENDED
CLEARANCE
269
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 2
507
1008
1040
15" X 25"
16" X 20"
16" X 20"
16" X 25"
1320
15" X 20"
FA
COIL
15" X 20"
FILTER
15" X 25"
FILTER
15" X 20"
FILTER
13
15" X 20"
1372
COIL
TOP VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
MOTOR
232
342
512
622
861.5
REAR VIEW
SIDE VIEW
10
Dimensional Data
DX Air Handling unit
TTV 300
FAN ARRANGEMENT 3
633.5
1808
1774
507
633.5
750
RECOMMENDED
CLEARANCE
51
750
RECOMMENDED
CLEARANCE
FRONT
1008
1040
750
RECOMMENDED
CLEARANCE
COIL
REAR
15" X 20"
15" X 25"
16" X 20"
16" X 20"
16" X 25"
FILTER
1320
15" X 20"
FAN
COIL
15" X 25"
FILTER
15" X 20"
FILTER
13
15" X 20"
1372
COIL
45
TOP VIEW
MOTOR
232
342
512
622
861.5
REAR VIEW
SIDE VIEW
633.5
1808
1774
507
633.5
750
RECOMMENDED
CLEARANCE
51
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 4
1008
1040
15" X 20"
15" X 25"
16" X 20"
16" X 20"
16" X 25"
FAN
1320
FILTER
15" X 20"
COIL
15" X 25"
FILTER
15" X 20"
FILTER
13
15" X 20"
1372
COIL
246
TOP VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
MOTOR
232
REAR VIEW
342
512
622
861.5
SIDE VIEW
11
Dimensional Data
DX Air Handling unit
TTV 400
316
481
2088
2054
370
481
316
750
RECOMMENDED
CLEARANCE
46
750
RECOMMENDED
CLEARANCE
414
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 1
1008
1040
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 25"
20" X 25"
20" X 25"
20" X 25"
1468
16" X 25"
FAN
COIL
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
52
FILTER
16" X 25"
1520
COIL
TOP VIEW
342
512
622
861.5
REAR VIEW
MOTOR
232
SIDE VIEW
316
481
2088
2054
370
481
316
750
RECOMMENDED
CLEARANCE
254.5
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 2
414
1008
1040
750
RECOMMENDED
CLEARANCE
COIL
16" X 25"
20" X 25"
20" X 25"
20" X 25"
REAR VIEW
FAN
COIL
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
1520
COIL
1-1/4" DRAIN PIPE
1-1/8" LIQUID LINE
2-1/8" SUCTION LINE
16" X 25"
1468
REAR
TOP VIEW
342
512
622
861.5
SIDE VIEW
12
MOTOR
232
Dimensional Data
DX Air Handling unit
TTV 400
FAN ARRANGEMENT 3
361
481
2088
2054
370
481
361
750
RECOMMENDED
CLEARANCE
67
750
RECOMMENDED
CLEARANCE
FRONT
1008
1040
735.5
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 25"
20" X 25"
20" X 25"
20" X 25"
FAN
1468
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
COIL
16" X 25"
FILTER
16" X 25"
1520
COIL
46
TOP VIEW
342
512
622
861.5
REAR VIEW
MOTOR
232
SIDE VIEW
FAN ARRANGEMENT 4
361
481
2088
2054
370
481
361
750
RECOMMENDED
CLEARANCE
67
750
RECOMMENDED
CLEARANCE
FRONT
1008
1040
735.5
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 25"
20" X 25"
20" X 25"
20" X 25"
REAR VIEW
FAN
1468
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
COIL
16" X 25"
FILTER
16" X 25"
1520
COIL
213.5
TOP VIEW
342
512
622
861.5
SIDE VIEW
13
MOTOR
232
Dimensional Data
DX Air Handling unit
TTV 500
441
2596
2562
452
569
569
441
750
RECOMMENDED
CLEARANCE
52.5
750
RECOMMENDED
CLEARANCE
569
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 1
ISOMETRIC VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
FAN
FILTER
16" X 25"
20" X 25"
25" X 25"
25" X 25"
25" X 25"
BOTTOM COIL
16" X 25"
FILTER
16" X 25"
1653
BOTTOM COIL
16" X 20"
1601
16" X 25"
TOP COIL
16" X 25"
16" X 25"
TOP COIL
16" X 20"
FILTER
TOP VIEW
MOTOR
1-1/4" DRAIN PIPE
1-1/8" LIQUID LINE
2-1/8" SUCTION LINE
461
571
741
851
1090.5
REAR VIEW
SIDE VIEW
441
2596
2562
452
569
569
441
750
RECOMMENDED
CLEARANCE
299.5
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 2
569
1241
1275
750
FILTER RECOMMENDED
CLEARANCE
COIL
16" X 25"
16" X 25"
16" X 20"
16" X 25"
16" X 25"
16" X 25"
20" X 25"
25" X 25"
25" X 25"
25" X 25"
FILTER
REAR VIEW
FILTER
1653
BOTTOM COIL
1-1/4" DRAIN PIPE
1-1/8" LIQUID LINE
2-1/8" SUCTION LINE
FAN
1601
16" X 25"
TOP COIL
16" X 20"
TOP COIL
TOP VIEW
BOTTOM COIL
REAR
461
571
741
851
1090.5
SIDE VIEW
14
MOTOR
Dimensional Data
DX Air Handling unit
TTV 500
FAN ARRANGEMENT 3
750
RECOMMENDED
CLEARANCE
486
2596
2562
452
569
569
486
750
RECOMMENDED
CLEARANCE
FRONT
ISOMETRIC VIEW
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 20"
16" X 25"
16" X 25"
16" X 25"
20" X 25"
25" X 25"
25" X 25"
25" X 25"
FILTER
FILTER
1653
BOTTOM COIL
FAN
1601
16" X 25"
TOP COIL
16" X 25"
BOTTOM COIL
16" X 25"
TOP COIL
16" X 20"
FILTER
51
TOP VIEW
461
571
741
851
1090.5
REAR VIEW
MOTOR
SIDE VIEW
FAN ARRANGEMENT 4
750
RECOMMENDED
CLEARANCE
486
2596
2562
452
569
569
486
750
RECOMMENDED
CLEARANCE
FRONT
1241
1275
750
RECOMMENDED
CLEARANCE
COIL
REAR
16" X 25"
16" X 25"
20" X 25"
25" X 25"
25" X 25"
25" X 25"
REAR VIEW
1653
BOTTOM COIL
1-1/4" DRAIN PIPE
1-1/8" LIQUID LINE
2-1/8" SUCTION LINE
FAN
461
571
741
851
1090.5
SIDE VIEW
15
1601
16" X 25"
TOP COIL
16" X 20"
BOTTOM COIL
16" X 25"
FILTER
16" X 25"
FILTER
16" X 25"
FILTER
16" X 20"
TOP COIL
301
TOP VIEW
MOTOR
Dimensional Data
DX Air Handling unit
TTV 600
750
RECOMMENDED
CLEARANCE
441
2596
2562
452
569
569
441
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 1
1241
1275
569
750
RECOMMENDED
CLEARANCE
COIL
20" X 25"
20" X 25"
20" X 25"
20" X 20"
20" X 25"
20" X 25"
20" X 25"
1725
20" X 20"
FAN
TOP COIL
20" X 25"
FILTER
20" X 25"
FILTER
20" X 25"
FILTER
20" X 20"
1777
BOTTOM COIL
TOP COIL
TOP VIEW
BOTTOM COIL
REAR
461
571
741
851
1090.5
REAR VIEW
MOTOR
SIDE VIEW
441
2596
2562
452
569
569
441
750
RECOMMENDED
CLEARANCE
299.5
750
RECOMMENDED
CLEARANCE
FRONT
750
RECOMMENDED
CLEARANCE
FAN ARRANGEMENT 2
569
1241
1275
20" X 25"
20" X 25"
20" X 25"
20" X 20"
20" X 25"
20" X 25"
20" X 25"
REAR VIEW
1725
20" X 20"
FAN
BOTTOM COIL
20" X 25"
FILTER
20" X 25"
FILTER
20" X 25"
FILTER
20" X 20"
1777
BOTTOM COIL
TOP COIL
TOP VIEW
TOP COIL
750
RECOMMENDED
CLEARANCE
COIL
REAR
461
571
741
851
1090.5
SIDE VIEW
16
MOTOR
Dimensional Data
DX Air Handling unit
TTV 600
FAN ARRANGEMENT 3
750
RECOMMENDED
CLEARANCE
486
2596
2562
452
569
569
486
750
RECOMMENDED
CLEARANCE
FRONT
1241
1275
750
RECOMMENDED
CLEARANCE
COIL
REAR
20" X 25"
20" X 25"
20" X 20"
20" X 25"
20" X 25"
20" X 25"
1725
20" X 25"
TOP COIL
20" X 20"
FAN
BOTTOM COIL
20" X 25"
FILTER
20" X 25"
FILTER
20" X 25"
FILTER
20" X 20"
1777
BOTTOM COIL
TOP COIL
51
TOP VIEW
461
571
741
851
1090.5
REAR VIEW
MOTOR
SIDE VIEW
FAN ARRANGEMENT 4
750
RECOMMENDED
CLEARANCE
486
2596
2562
569
569
486
750
RECOMMENDED
CLEARANCE
452
FRONT
1241
1275
1-1/4" DRAIN
1-1/8" LIQUID LINE
2-1/8" SUCTION
20" X 25"
20" X 25"
20" X 25"
20" X 20"
20" X 25"
20" X 25"
20" X 25"
REAR VIEW
FAN
461
571
741
851
1090.5
SIDE VIEW
17
1725
20" X 20"
BOTTOM COIL
20" X 25"
FILTER
20" X 25"
FILTER
20" X 25"
FILTER
20" X 20"
1777
BOTTOM COIL
TOP COIL
30
TOP VIEW
TOP COIL
750
RECOMMENDED
CLEARANCE
COIL
REAR
MOTOR
Wiring Diagram
NOTES:
1 DASHED LINES INDICATE RECOMMENDED FIELD
WIRING BY OTHERS. DASHED LINE ENCLOSURES
AND/OR DASHED DEVICE OUTLINES INDICATE
COMPONENTS PROVIDED BY THE FIELD. PHANTOM
LINE ENCLOSURES INDICATE ALTERNATE
CIRCUITRY OR AVAILABLE SALES OPTIONS.
SOLID LINE INDICATES FACTORY WIRING.
380-415V/3 PHASE/50 Hz
L2
L3
L1
LEGEND
DEVICE
DESIGNATION
MTR
EVF-C
TB
L1,L2,L3
EVF-OL
S1
DESCRIPTION
FAN MOTOR
EVAP. FAN CONTACTOR.
TERMINAL BLOCK
LINE VOLTAGES
EVAP. FAN O/LOAD.
SYSTEM SWITCH.
WARNING
HAZARDOUS VOLTAGE!
FUSED
DISCONNECT
SWITCH
TB2
L1
L2
IMPORTANT
240 VAC
TB1
L3
EVFC
EVFOL
L1
L2
EVF
MTR
L3
WITHOUT STARTER
1B
E
(G)
U1 (R)
V1 (Y)
EVF
MTR
J1
J2
W2 (B)
J3
W1 (B)
U2 (R)
V2 (Y)
TB = TERMINAL BLOCK
EVF MTR = EVAPORATOR FAN MOTOR
NOTE:
1. FOR DOL STARTING, TEMINATION
INTO TERMINALS U1 , V1 & W1 ONLY
2. FOR STAR-DELTA STARTING,
REMOVED JUMPERS J1 , J2 & J3 AND
TERMINATE INTO TERMINALS U1 , V1
, W1 , U2 , V2 & W2.
MOTOR SIZE
STANDARD
OVER SIZE - 1
5 hp (3.7 kW)
7.5 hp (5.5 kW)
7.5 hp (5.5 kW)
10 hp (7.5 kW)
7.5 hp (5.5 kW)
10 hp (7.5 kW)
10 hp (7.5 kW)
15 hp (11 kW)
15 hp (11 kW)
20 hp (15 kW)
MODEL
TTV250
TTV300
TTV400
TTV500
TTV600
18
OVER SIZE - 2
10 hp (7.5 kW)
15 hp (11 kW)
15 hp (11 kW)
20 hp (15 kW)
---------------