Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
For those who have been wondering about the leftover splitscreen code in left 4 dead and how to
get it working, I have gotten it working. Below are the steps to get it working yourself
1. Find an XBOX360 controller
2. Plug it in
3. Edit your 360controller.cfg file located in your \left4dead\cfg folder
Copy and paste the following and overwrite other information in your 360controller.cfg
Code:
Unbindall // Prevent mouse/keyboard control when gamepad is in use (to prevent autoaim
exploit)
joystick 1
joy_advanced "1"
joy_accelmax 4.0
joy_response_move 5
joy_response_look 1
joy_autoaimdampen 0.3
joy_autoaimdampenrange 0.85
joyadvancedupdate // advanced joystick update allows for analog control of move and look
// Alternate control 1
bind "0" "slot10"
bind "1" "slot1"
bind "2" "slot2"
bind "3" "slot3"
bind "4" "slot4"
bind "5" "slot5"
bind "6" "slot6"
bind "7" "slot7"
bind "8" "slot8"
bind "9" "slot9"
bind "a" "+moveleft"
bind "c" "+voicerecord"
bind "d" "+moveright"
bind "e" "+use"
bind "f" "impulse 100"
bind "h" "motd"
bind "m" "chooseteam"
bind "q" "lastinv"
bind "r" "+reload"
bind "s" "+back"
bind "t" "impulse 201"
bind "u" "messagemode2"
bind "w" "+forward"
bind "x" "+mouse_menu QA"
bind "y" "messagemode"
bind "z" "+mouse_menu Orders"
bind "`" "toggleconsole"
bind "SPACE" "+jump"
bind "TAB" "+showscores"
bind "ESCAPE" "cancelselect"
bind "SHIFT" "+speed"
bind "CTRL" "+duck"
bind "F1" "Vote Yes"
bind "F2" "Vote No"
bind "F5" "jpeg"
bind "MOUSE1" "+attack"
bind "MOUSE2" "+attack2"
bind "MOUSE3" "+zoom"
4. IT IS NECESSARY THAT YOU SET THE 360 CONTROLLER SET TO PLAYER 2, THIS
MEANS THE LIGHT INDICATOR ON THE CONTROLLER MUST BE ON THE NUMBER
2! -Red text below indicates how to do this
5. Boot up the game
6. open console and type "Exec 360controller.cfg" without the quotations
7. Set your split screen mode to either Horizontal-Cut (ss_splitmode 1) or Vertical-Cut
(ss_splitmode 2) through the console, vertical cut is meant for widescreen monitors and dual
monitor setups while the horizontal for standard monitors
8. Open the console and enter ss_enable 1 once this is enabled you can simply start a single
player game through the menu and splitscreen will already be enabled.
Alternatively, join an online game and enter "ss_connect" to add a splitscreen player and
"ss_disconnect" to remove.
ATTENTION; IF SECOND PLAYER JOINS GAME AND DOES NOT AUTOMATICLY JOIN
A TEAM USE THE COMMAND "cmd2 jointeam 2" FOR 2nd PLAYER TO JOIN
SURVIVORS AND "cmd2 jointeam 3" FOR 2nd PLAYER TO JOIN INFECTED
9. HAVE THE CONTROLLER SET TO PLAYER 1, START A GAME AND AS SOON AS
THE LOADING SCREEN APPEARS UNPLUG THE CONTROLLER, WAIT ONE OR TWO
SECONDS AND PLUG IT BACK IN BEFORE THE GAME STARTS
10. PLAY CO-OP THE WAY ITS MEANT TO BE PLAYED!
11. People with controllers other than Xbox 360 controllers will have to create their own
controller configurations, simply edit the above CFG to match your controller. Lines that start
with "cmd2 bind" are the controls you will need to set.
This is really fantastic VALVe is the last developer I would expect to make a splitscreen pc game
and I am crying with joy that this is possible, note the fact that the game is running at
1680X1050 in those screenshots with a solid 60fps on both screens with max settings 4xaa on
only an 8800gt.
Hope this helps those who want to play in splitscreen on their pc, hopefully a patch will come
out that can make this process much simpiler.