Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Bill Of Quantities
ITB 2012-004
Bill of Quantities
January, 2012
Description
The contractor shall provides, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
1.1
L.S
M3
M2
760
M2
35
No
20
Supply and built hollow cement blocks type 402010 cm with compressive strength
35 kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
elements, the work and cost include cutting the porcelain tiles under the walls and
applying a proper material as a grout material to fill the space between the blocks and
the cut tiles according to specification and the engineer's instructions.
Amount
US$
No.
No.
(The work include supply and install, paint with antibacterial paint where required, and No.
fixing two stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at middle
at the both sides according to drawing , specifications and engineer instructions).
10
Supply and install internal Applicable Aluminum Slides doors size (80220)cm.
complete with all required sealants, locks, ironmongeries according to, specifications
and engineer's instructions.
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete with
frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
4.3
No.
No.
(The work include supply and install antibacterial paint, two 4mm clear glass 40x40cm, No.
and fixing two stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at
middle at the both sides according to drawing , specifications and engineer instructions )
Ditto, but two leaves and two way swing hinges and switches type(D4) size (150x220)
cm.
(The work include supply and install ,paint with antibacterial paint, two 4mm clear
4.5
glass 40x40cm, and fixing two stainless steel kick plates 0.6mm thick. 20cm at bottom
and 40cm at middle at the both sides according to drawing , specifications and engineer
instructions )
Ditto but two leaves and two way swing hinges and switches type(D7)size (180x220)
cm.
4.6
4.7
Supply &install Zan beach protection wood size(20x4.5cm) decorative Protection wood
will be fixed on the walls using hidden bolts, painting with two coats of lazor paint and L.M
one coat of varnish according to specification and supervisor engineer instructions.
280
4.8
Supply and install colored aluminum partitions (2000) system complete with clear glass
4mm. thick, with all required sealants, locks, ironmongeries for ICU rooms windows M2
according to drawings, specifications and engineer's instructions.
11
4.9
Supply and installing colored Aluminum sliding window (7000) system three rails
including fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
M2
27
Unit
4.10
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
M2
1600
L.M
30
6.1
Supply & install local marble (Khalily) 3cm thick for windows or sills with minimum
width 25cm according to specifications and engineer's instructions.
(All works includes removal of existing Local marble and to submit the removed items
to the engineer and to transport it to approved place ).
6.2
Supply & install floor European ceramic tiles (20200.8) cm or any approved size for
W.C, according to specification and engineer's instructions .
M2
40
6.3
Supply & install wall European ceramic tiles (20200.6) cm or any approved size for
W.C, according to specification and engineer's instructions .
M2
200
L.M
Supply & install a good quality ceramic skirting tiles from the same type with the same
color, size 3070.8 cm chips, according to specifications and engineer's instructions.
L.M
450
6.5
7.3
Supply and paint one primer and minimum two coats of emulsion paint (Poliside) for
roofs, ceiling and drop beams as per specifications, drawings & the engineer's
instructions.
Supply and paint one prime coat and minimum two coats of ANTI FUNGICID PAINT
for the internal walls, roofs and columns, soffits, roof, false ceiling , and drop beams
according to specifications and engineer's instructions, (optional item).
Total Bill No.7 (Carried to Summary)
M2
800
M2 1200
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Supply and fix Stainless steel double bowl sink size 50 cm x 80 cm (Foster Type) or
equivalent. Complete with all water supply pipes 16 mm type Goulany (PE) to the D.B,
8.2 waste fittings, plug and chain, swan water mixer top quality (Hamat Jack type or
equivalent),soap holder, steel brackets supports, and 2'' drainage line to floor trap
according to drawings, specifications, and engineer's instructions.
Unit
L.M
20
No.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.5 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and
No.
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
Supply and install Stainless steel sink 240x60x40cm (for scrub room), Complete with
all water supply pipes 16 mm type Goulany (PE) , waste fittings, plug and chain, with
8.6 two long arm water mixer top quality (Hamat jack type or equivalent for sterilization) , No.
soap holder, steel brackets supports, and 2'' drainage line to floor trap according to
drawings, specifications, and engineer's instructions.
Supply and install approved trade mark electric water heater size 50 liter ARESTON or
equivalent with all required electrical and plumping work and material like valves, air
8.7
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
No.
Supply and install local marble water distribution board size (80x80cm) complete with
aluminum cover, main headers, air release valves ,all necessary fitting , all needed
8.8 Goulany (PE) pipes16mm (hot and cold )from the board to the required point, and
Unit
Goulany (PE) pipes 20mm from water source to the distribution board complete with all
required fitting.
Supply and fix white glazed fireclay shower size (7070)cm. (Ariston type) , Complete
with all water supply PE pipes to the D.B and high quality mixer Hamat Jack type or
8.9
Unit
equivalent , waste fittings, plug and chain, soap holder, supports, and 2'' drainage line to
floor trap according to specifications, and engineer's instructions.
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
8.3 concrete protection cover, and include drilling into the floors and slabs if needed
8.10
Supply and install all required parts for maintenance for all existing internal and
external UPVC pipes in any diameter in the 3rd floor (optional item) .
L.S
L.S
Supply and install preparation work for medical gases including copper pipes and
8.11 accessories all according to the drawings. The item includes cutting and reinstatement
of the walls.
Total Bill No.8 (Carried to Summary)
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
No.
16
No.
10
No.
No.
89
No.
10
No.
16
9.7 Ditto as item 9.5, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
15
No.
9.9 Ditto as item 9.5, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
16
No.
20
9.11 Ditto as item 9.10, but water proof (Type is Gewiss or equivalent)
No.
21
No.
33
supply, install connect bed head unit point including cables, junction box and all
aceesories according to engineering instructions
No.
16
supply, install connect lighting point for boom including cables, junction box and all
aceesories according to engineering instructions
Ditto as item 9.14 but socket panel including:1ph & 3ph sockets.(Type is Hagger or
9.15
equivalent)
Supply and install three phase isolating switch 20A moller type including cables ,
9.16
conduits and all accessories to complete the job
No.
No.
No.
9.1
9.2 Ditto as item 9.1, but with 2X26W PL lamp (Type is GA'ASH 553900or equivalent)
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
9.3 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
Supply ,installand test lighting point for false ceiling the work including wires,
9.4
conduits, boxes and all necessary accessories.
Section 2: Switches & sockets:
Supply, install connect and test single pole one way switch, 220v, 13A, complete with
9.5 PVC conduits, J.boxes, wiring,cover and all necessary accessories. (Type is Gewiss or
equivalent).
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.10 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
9.13
9.14
No.
No.
13
No.
No.
No.
No.
No.
unit
9.19
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
No.
27
No.
Supply, install break glass call point as per drawings the unit shall be standard type for
9.27
interior use with key operated test facility, with plastic coated glass.
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
9.28
TELEFIRE or equavilent).
No.
No.
9.29 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
No.
No.
b.
No.
c.
No.
d.
No.
16
No.
L.M
80
LS
L.M
80
L.M
80
No.
b.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
No.
e.
No.
f.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
g.
Change over 4x40A between UPS nad main supply (Type or equivalent).
No.
e.
Section 7 :
9.35 Sub-Distribution Boards (DBB1 )
Supply, install sub-distribution board consists of lockable board frames as per
specifications including 2m Galv. steel sheets with anti-static paint, bus bars for
a. incoming cables, neutral and earthing terminal with all necessary accessories and
material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
a.
No.
b.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
d.
No.
12
e.
No.
f.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
g.
Change over 4x40A between UPS nad main supply (Type or equivalent).
No.
a.
No.
b.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
14
d.
No.
e.
Change over 4x40A between UPS nad main supply (Type or equivalent).
No.
a.
No.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
d.
No.
e.
No.
f.
No.
g.
No.
10
h.
No.
i.
No.
j.
No.
k.
Change over 4x40A between UPS nad main supply (Type or equivalent).
No.
l.
Supply and install insulation completet unit for operation room including insulation
transformer 5kva , insulation monitor , insulation indication , wiring and all aceesories
to complete the job per Bender.
unit
a.
No.
No.
c.
Miniature Circuit Breaker MCB 3X63A. (Type is MOELLER AZ-3-C63 or equivalent). No.
d.
Miniature Circuit Breaker MCB 3X16A. (Type is MOELLER AZ-3-C16 or equivalent). No.
e.
Miniature Circuit Breaker MCB 3X10A. (Type is MOELLER AZ-3-C10 or equivalent). No.
f.
No.
g.
No.
16
h.
Supply and install voltmeter with 7 position selector switch complete with all
accessories
No.
i.
No.
No.
Supply and install ammeter with CT 150/5A
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
k.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 3rd floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing walls, wooden partition ,gypsum decorations,
gypsum decorations around circular columns, aluminum parts, ,removing arising
1.1
disposals. The price include transfer all of this material outside the site with coordinate
with PRCS staff.
Total Bill No.1 (Carried to Summary)
L.S
M3
Supply and built hollow cement blocks type 402010 cm with compressive strength 35
kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
3.1 elements, according to specification and the engineer's instructions, the work and cost
M2
include cutting the porcelain tiles under the walls and applying a proper material as a
grout material to fill the space between the blocks and the cut tiles according to
specification and the engineer's instructions.
3.2
M2
320
10
Amount
US$
4.1
Supply and install internal Aluminum doors size (80220)cm.(4200) system complete
with glass 4 mm. thick., fiberglass 4 mm. thick., with all required sealants, locks,
ironmongeries according to, specifications and engineer's instructions
No.
4.2
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete with
frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
No.
4.3
No.
Supply and install colored aluminum partitions (2000) system complete with clear glass
6 mm. thick., fiberglass 4 mm. thick., opening for doors and windows with all required
4.4
sealants, locks, ironmongeries according to drawings, specifications and engineer's
instructions
M2
210
Supply and installing colored Aluminum sliding window (7000) system three rails
including the fixed parts and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
M2
27
Unit
4.5
4.6
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
M2
455
L.M
120
6.1
Supply & install local marble (Khalily) 3cm thick for windows or sills with minimum
width 25cm according to specifications and engineer's instructions.
(All works includes removal of existing Local marble and to submit the removed items
to the engineer and to transport it to approved place ).
6.2
Supply & install floor European ceramic tiles (30300.8) cm size, according to
specification and engineer's instructions.
M2
760
6.3
Supply & install wall European ceramic tiles (20200.8) cm or any approved size for
W.C, according to specification and engineer's instructions .
Total Bill No.6 (Carried to Summary)
M2
160
Supply and paint one primer and minimum two coats of emulsion paint (Poliside) for
roofs, ceiling and drop beams as per specifications, drawings & the engineer's
instructions.
Total Bill No.7 (Carried to Summary)
M2
700
M2
850
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Unit
L.M
15
supply, and install floor trap with all necessary fitting, including heavy duty brass
grating and 2" and 4" diam. PVC drainage pipe to the nearest manhole or to the nearest
vertical sewage header in the typical floors according to specifications, and engineer's
instructions.
No.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.5 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
No.
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivalent with all required electrical and plumping work and material like valves, air
8.6
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
No.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.7 tap 1\2'' including all water pipes 16mm GOULANY (PE) to the D.B, Fittings, paper
Unit
holder and flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest
manhole according to specifications, and engineer's instructions.
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
8.3 concrete protection cover, and include drilling into the floors and slabs if needed
8.4
8.8
Supply and install all required parts for maintenance for all existing internal and
external UPVC pipes in any diameter, in the 4th floor (optional item )
Total Bill No.8 (Carried to Summary)
L.S
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items in
this Bill such as cutting into the walls and ceiling then repairing.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents.
The prices will be deemed to include for the full cost as described in all Documents,
such as cutting into the walls and ceilings then repairing.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
73
9.2
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
No.
No.
9.4 Ditto as item 9.3, but with 2X26W PL lamp (Type is GA'ASH or equivalent)
No.
Supply ,installand test lighting point for false ceiling the work including wires,
conduits, j. boxes and all necessary accessories.
Section 2: Switches & sockets:
No.
40
No.
No.
9.8 Ditto as item 9.6, but one way, two pole switch.(Type is Gewiss or equivalent).
No.
20
No.
12
9.10 Ditto as item 9.6, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
10
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.11 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
accessories. (Type is Gewiss or equivalent)
No.
17
No.
42
9.13 Ditto as item 9.11 but water proof (Type is Gewiss or equivalent)
No.
supply, install connect and, testing one phase 32A, surface mounting isolating switch,
9.14 complete with PVC conduits, J.boxes, cables, and all necessary accessories. (Type is
Moller or equivalent)
No.
13
No.
No.
44
No.
39
No.
Supply, install sub-telephone and computer rack U10 with patch panels 24 port for
telephone and data complete with all connection strips, termination, cables from socket
9.19
No.
outlet to rack and from rack to telephone and data central as per drawings and engineers
instructions . Preparation works
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
9.5
Supply, install connect and test single pole one way switch, 220v, 13A, complete with
9.6 PVC conduits, J.boxes, wiring,cover and all necessary accessories. (Type is Gewiss or
equivalent).
9.15
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
equivalent).
Ditto as item 9.16, but Datar socket outlet complete with all conduits and cables from
9.17 the socket to the main computer junction box, type STP, cat 5. (Type is GEWISS or
equivalent).
Supply, install sub-telephone and computer rack points with all connection cables from
9.18 socket outlet to rack and from rack to telephone and data central as per drawings ans
engineer instructions.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
9.20 conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or
equivalent).
ML
Amount
US$
No.
30
No.
equavilent).
9.22 ditto, but heat detector.
9.23
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.24
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
9.25 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
Supply and install electrical cable XLPE from MDB to sub-DB,S (5X10)mm2 inside3"
rigid PVC pipes.
L.M
80
9.27
Connect of the existing CABLE 3x25+16+E from MDB to SDB including all
accessories to complete the job.
LS
9.28
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories.
L.M
80
L.M
80
a.
No.
b.
No.
c.
No.
15
d.
No.
e.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
a.
No.
No.
c.
No.
11
No.
e.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
a.
No.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
No.
13
e.
No.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
g.
Change over 4x40A between UPS nad main supply (Type or equivalent).
No.
a.
No.
No.
c.
No.
19
Supply and install voltmeter with 7 position selector switch complete with all accessories No.
e.
No.
No.
Supply and install ammeter with CT 150/5A
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 4th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing steel ,wooden , aluminum parts, and existing
bathrooms ,removing arising disposals, existing floor and wall tiles and the old sand,
1.1 site cleaning, repair the cutting edges and joints between removed and remaining parts
of walls and ceiling, and all needed works and materials. The price include transfer all
of this material outside the site with coordinate with PRCS staff.
L.S
2.1
Supply and cast B250 reinforced concrete for lintels and sills in block work, and small
concrete elements and architectural works, according to the engineers instructions with
minimum reinforcement 210 mm for 10cm brick walls, and 412mm for 20cm brick
walls and 6mm /20cm stirrups for both.
M3
2.2
Supply and cast B250 reinforced concrete for stairs, according to the drawing and
engineers instructions.
M3
0.3
Supply and cast B250 reinforced concrete for solid slab with minimum thickness 12 cm,
the cost include fixing the new slab with the exist one by drilling a holes in old slab with
2.3 larger diameter than the steel bar diameter and applying a proper bonding agents after
M3
that installing the anchoring dowels according to the drawing and engineers
instructions.
Total Bill No.2 (Carried to Summary)
Supply and built hollow cement blocks type 402010 cm with compressive strength
35 kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
3.1 elements, according to specification and the engineer's instructions. The work and cost
include cutting the porcelain tiles under the walls and applying a proper material as a
grout material to fill the space between the blocks and the cut tiles according to
specification and the engineer's instructions.
3.2
Making openings in the walls for UVAC ducts including supply and install wooden
frames from plywood thickness of 18 mm for the width of the wall according to the
3.3 drawings and closing them with plywood sheets (4mm) thickness, painted and to be
ready for use according to engineer approval. The item includes finishing and painting
work around the opening. Measurement is for No. regardless the size.
Total Bill No.3 (Carried to Summary)
M2
765
M2
270
No
Amount
US$
Supply and install internal Aluminum doors size (80220)cm.(4200) system complete
with glass 4 mm. thick., fiberglass 4 mm. thick., with all required sealants, locks,
ironmongeries according to, specifications and engineer's instructions.
No.
4.2
No.
No.
No.
No.
10
No.
Supply and install internal Applicable Aluminum Slides doors size (80220)cm.
4.3 complete with all required sealants, locks, ironmongeries according to, specifications
and engineer's instructions.
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete with
frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
4.4
(The work include supply and install, paint with antibacterial paint, and fixing two
stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at middle at the both
sides according to drawing , specifications and engineer instructions).
Ditto but two leaves size (120220) cm.
4.5
(The work include supply and install antibacterial paint where required, and fixing two
stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at middle at the both
side according to drawing , specifications and engineer instructions )
Ditto but two leaves size (150220) cm.
4.6
(The work include supply and install antibacterial paint where required, and fixing two
stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at middle at the both
side according to drawing , specifications and engineer instructions )
Ditto but two leaves size (170220) cm.
The work include supply and install antibacterial paint where required, two 4mm clear
No.
glass 40x40cm, and fixing two stainless steel kick plates 0.6mm thick. 20cm at bottom
and 40cm at middle at the both sides according to drawing , specifications and engineer
instructions )
Supply and installing colored Aluminum sliding window (7000) three rails system
4.8 including the fixed parts and all accessories, with 4mm clear glass, and metal fly screen M2
according to drawings, specifications and engineer's instructions.
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
4.9
Unit
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
4.7
27
4
M2
1700
L.M
41
Supply & install floor European ceramic tiles (30300.8) cm size, according to
specification and engineer's instructions.
M2
790
6.3
Supply & install wall European ceramic tiles (20200.8) cm or any approved size for
W.C, according to specification and engineer's instructions.
Total Bill No.6 (Carried to Summary)
M2
390
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
12
8.2
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
concrete protection cover, and include drilling into the floors and slabs if needed
according to specifications, and engineer's instructions.
L.M
50
8.3
supply, and install floor trap with all necessary fitting, including heavy duty brass
grating and 2" and 4" diam. PVC drainage pipe to the nearest manhole or to the nearest
vertical sewage header in the typical floors according to specifications, and engineer's
instructions.
No.
14
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.4 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and
No.
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
14
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivalent with all required electrical and plumping work and material like valves, air
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
No.
14
Supply and install local marble water distribution board size (80x80cm) complete with
aluminum cover, main headers, air release valves, all necessary fitting , all needed
8.6 Goulany (PE) pipes16mm (hot and cold )from the board to the required point, and
Unit
Goulany (PE) pipes 20mm from water source to the distribution board complete with all
required fitting.
8.7
Supply and fix white glazed fireclay shower size (7070)cm. (Hamat type), Complete
with all water supply PE pipes to th D.B and high quality mixer Hamat jack type or
Unit
equivalent , waste fittings, plug and chain, soap holder, supports, and 2'' drainage line to
floor trap according to specifications, and engineer's instructions.
14
8.8
Supply and install all required parts for maintenance for all existing external UPVC
pipes in any diameter
L.S
L.S
8.5
8.9
Supply and install preparation work for medical gases including copper pipes and
accessories all according to the drawings. The item includes cutting and reinstatement
of the walls.
Total Bill No.8 (Carried to Summary)
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items in
this Bill such as cutting into the walls and ceiling then repairing.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
39
9.2
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
No.
21
9.3
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
is GA'ASH No. 552100 or equivalent)
No.
52
9.4
Ditto as item 9.3, but with 2X26W PL lamp (Type is GA'ASH or equivalent)
No.
14
No.
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
9.5 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
9.6
Supply, install, connect and test night light IVY with 8W PL lamp,wires, conduits, j.
boxes and fixing screws for wall mounted
No.
9.7
Supply ,install and test lighting point for false ceiling the work including wires,
conduits, j. boxes and all necessary accessories.
No.
41
Supply, install connect and test single pole one way switch, 220v, 13A, complete with
PVC conduits, J.boxes, wiring,cover and all necessary accessories. (Type is Gewiss or
equivalent).
No.
16
9.9
No.
20
9.10 Ditto as item 9.8, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
20
No.
12
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
30
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
accessories. (Type is Gewiss or equivalent)
No.
50
9.14 Ditto as item 9.13, but water proof (Type is Gewiss or equivalent)
No.
25
No.
No.
No.
supply, install connect and, heater switch with indicator lamp, complete with PVC
9.18
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
No.
10
No.
No.
No.
No.
10
9.15
Ditto as item 9.13, but socket panel including:1ph & 3ph sockets.(Type is Hagger or
equivalent)
supply, install connect and, testing three phase isolating switch 40A, surface mounting,
9.16 complete with PVC conduits, J.boxes, cables, and all necessary accessories. (Type is
Moller or equivalent)
equivalent).
Ditto as item 9.19, but Data socket outlet complete with all conduits and cables from
9.20 the socket to the main computer junction box, type STP, cat 5. (Type is GEWISS or
equivalent).
Supply, install sub-telephone and computer rack point with all connections cables from
9.21 socket outlet to rack and from rack to telephone and data central as per drawings and
engineer instructions.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
9.22 conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or
equivalent).
Amount
US$
No.
32
equavilent).
9.22
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.23
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
9.24 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
No.
b.
No.
c.
No.
10
No.
No.
10
e.
LS
9.32
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
L.M
80
L.M
80
Section 7:
9.34 Sub-Distribution Boards (DBB1 )
a.
No.
b.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C40 or equivalent). No.
c.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
d.
No.
e.
No.
14
f.
No.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4g.
No.
FIM0,03 or equivalent).
9.35 Sub-Distribution Boards (DBB2)
Supply, install sub-distribution board consists of lockable board frames as per
specifications and drawings including 2m Galv. steel sheets with anti-static paint, bus
a. bars for incoming cables, neutral and earthing terminal with all necessary accessories
No.
and material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
b.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
d.
No.
20
e.
No.
f.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
a.
No.
b.
No.
c.
Miniature Circuit Breaker MCB 3X63A. (Type is MOELLER AZ-3-C63 or equivalent). No.
d.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C40 or equivalent). No.
e.
No.
f.
No.
12
g.
No.
h.
Suplly and install ameter with ct,s 150/5A including all accessories
N0
k.
No.
l.
No.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 5th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing steel and wooden parts of the balcony, existing
bathrooms walls ,removing arising disposals, existing floor and wall tiles and the old
1.1 sand, site cleaning, repair the cutting edges and joints between removed and remaining
L.S
parts of walls and ceiling, and all needed works and materials. The price include
transfer all of this material outside the site with coordinate with PRCS staff.
M3
M3
0.8
Supply and built hollow cement blocks type 402010 cm with compressive strength 35
M2
kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
elements, according to specification and the engineer's instructions.
3.2 Ditto but type 402020 cm.
M2
245
Foundation fot the rest rooms shall be done completely, by establishing the frames from
white wood thickness of 2 cm and the width of the wall depending on the drawings and
3.3
the size empty (According to drawings) and close them with sheets of wood (5mm)
thickness, painted and be ready for use according to engineer approval.
Total Bill No.3 (Carried to Summary)
No
10
3
Amount
US$
4.1
Supply and install internal Aluminum doors size (80220)cm.(4200) system complete
with glass 4 mm. thick., fiberglass 4 mm. thick., with all required sealants, locks,
ironmongeries according to, specifications and engineer's instructions.
No.
4.2
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete with
No.
frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
4.3
No.
4.4
Supply and installing colored Aluminum sliding window (7000) three rails system
including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
M2
30
Unit
4.5
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
All works must be according to specification and engineer instructions. Rates shall
include :
1- Supply of all needed materials, including galvanized angles for the
corners as well as the use of galvanized wire mesh between concrete and
2- Preparation works by covering all conduits of electricity, water supplies
,between existing walls and slabs etc, with a galvanized wire mesh at
least 20cm width coated by mortar (1:1) cement : sand and the work
includes removal of wires and nails and cleaning of surfaces to be ready for
plastering .This should be done prior to commencement of plastering and
after obtaining a written approval from the supervision engineer.
3- Contractor shall take into consideration that all direct and indirect
works and expenses required for the completion of the coming items are
included in the unit price.
4- Curing with water for at least three days for each coat.
5- Price of plastering shall include all required materials and works,
mixing, scaffolds, cleaning the site, required equipment and workmanship to
complete the work according to specifications and directions of the engineer.
Supply and make internal plastering for internal walls ,soffits, roofs, columns, beams,
and exist damaged areas. The work includes rough primer nail rendering to form a key
with (mix 1 : 1) cement : sand, second layer 13mm: Base-Coat "Rendering" with
5.1
(1 : 3 : 0.25) cement : sand mortar: lime and third layer: Finishing Coat with (1 : 4 :
0.50) cement : sand mortar : lime. Works include all materials needed to finish the
works according to specifications , drawings and supervisor engineer's instructions.
Total Bill No.5 (Carried to Summary)
M2
325
Supply & install wall European ceramic tiles (20200.8) cm or any approved size for
W.C, according to specification and engineer's instructions .
Supply and install marble benches, 70 cm. width, 80 cm. height, 20 mm. thick. Tiger
eye type with local marble shelves and partitions of 30 mm. thick. and colored
6.4
aluminum doors including all required openings, necessary materials, and works
according to drawings, specifications, and engineer's instructions.
Total Bill No.6 (Carried to Summary)
M2
425
L.M
20
M2
370
M2
875
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Unit
10
L.M
20
L.M
40
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
8.2 concrete protection cover, and include drilling into the floors and slabs if needed
Supply, fix and connect 6 internal diameter UPVC including fixing in the wall or
fixing externally ,B250 concrete protection cover.
Supply, and install floor trap with all necessary fitting, including heavy duty brass
grating and 2" and 4" diam. PVC drainage pipe to the nearest manhole or to the nearest
8.4
No.
vertical sewage header in the typical floors according to specifications, and engineer's
instructions.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.5 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and No.
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
10
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivalent with all required electrical and plumping work and material like valves, air
8.6
No.
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
Supply and install local marble water distribution board size (80x80cm) complete with
aluminum cover, main headers, air release valves, all necessary fitting , all needed
8.7 Goulany (PE) pipes16mm (hot and cold )from the board to the required point, and Unit
Goulany (PE) pipes 20mm from water source to the distribution board complete with all
required fitting.
Supply and fix white glazed fireclay shower size (7070)cm. (ARISTON type) ,
Complete with all water supply PE pipes to the D.B and high quality mixer Hamat jack
8.8
type or equivalent , waste fittings, plug and chain, soap holder, supports, and 2''
drainage line to floor trap according to specifications, and engineer's instructions.
Unit
L.S
8.9
Supply and install all required parts for maintenance for all existing internal and
external UPVC pipes in any diameter .
Total Bill No.8 (Carried to Summary)
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items
in this Bill.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
is GA'ASH No. 552100 or equivalent)
No.
25
No.
25
9.4 Ditto as item 9.3, but with 2X26W PL lamp (Type is GA'ASH or equivalent)
No.
No.
10
9.6
Supply, install, connect and test lighting fixture including lamp,wires, conduits, j. boxes
No.
and fixing screws (Type MD500B-Y600-JYY(BLUE) or equivelent
24
9.7
Supply ,install and test lighting point for false ceiling the work including wires,
conduits, j. boxes and all necessary accessories.
No.
12
No.
No.
14
9.10 Ditto as item 9.8, but one way, two pole switch.(Type is Gewiss or equivalent).
No.
No.
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
16
No.
14
No.
20
Ditto as item 9.13, but socket panel including:1ph & 3ph sockets.(Type is Hagger or
No.
equivalent)
9.16 Ditto as 9.13 but double socket
No.
No.
No.
9.1
9.2
Supply, install, connect and test incandescence wall mounted lighting fixture with 40w
9.5 lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is star code
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
9.17 Supply and install single phase isolating switch 25A Moller type or equivelent
9.18
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
No.
No.
No.
15
No.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
9.20 conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or
equivalent).
Section 4 : Fire Alarm System
Supply, install and commissioning fire alarm system as per drawings including fire
resist PVC pipes, pull boxes special wires which includes :
Supply, install and commission loization smoke detector, the detectors shall be twin9.21 chamber with latching electronic circuitry, two wire connection.(Type is TELEFIRE or
equavilent).
9.22 Ditto, but heat detector.
9.23
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.24
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
LS
LM
50
L.M
80
L.M
80
9.25 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
Section 6:
9.30 Sub-Distribution Boards (DBB1 )
a.
No.
b.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C40 or equivalent). No.
c.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
d.
No.
12
e.
No.
f.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
a.
No.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
d.
No.
e.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
a.
No.
b.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
d.
No.
e.
No.
f.
No.
g.
No.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 6th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Removing arising disposals site cleaning, Rubble resulting from the fire which
happened in the building, and site arrangement to the satisfaction of the supervisor
engineer before and after completion of work.
1.1 Demolishing and dismantling of existing bathrooms ,removing arising disposals,
L.S
existing floor and wall tiles and the old sand and mortar, site cleaning, repair the cutting
edges and joints between removed and remaining parts of walls and ceiling, and all
needed works and materials. The price include transfer all of this material outside the
site in coordination with PRCS staff.
Total Bill No.1 (Carried to Summary)
Supply and cast B250 reinforced concrete for stairs, according to the drawing and
engineers instructions.
Total Bill No.2 (Carried to Summary)
M3
Amount
US$
Supply and built hollow cement blocks type 402010 cm with compressive strength
35 kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
3.1 elements, according to specification and the engineer's instructions. the work and cost
include cutting the porcelain tiles under the walls and applying a proper material as a
grout material to fill the space between the blocks and the cut tiles according to
specification and the engineer's instructions.
3.2 Ditto but type 402020 cm.
3.3 Making openings in the walls for UVAC ducts including supply and install wooden
frames from plywood thickness of 18 mm for the width of the wall according to the
drawings and closing them with plywood sheets (4mm) thickness, painted and to be
ready for use according to engineer approval. The item includes finishing and painting
work around the opening. Measurement is for No. regardless the size.
Total Bill No.3 (Carried to Summary)
M2
303
M2
10
No
10
Supply and install internal Aluminum doors size (80220)cm.(4200) system complete
with glass 4 mm. thick., fiberglass 4 mm. thick., with all required sealants, locks,
ironmongeries according to, specifications and engineer's instructions.
No.
12
No.
No.
M2
27
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
Unit
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete
with frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
4.3 Ditto but tow leaves size (120220) cm.
4.2
Supply and installing colored Aluminum sliding window (7000) three rails system
4.4 including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
4.5
M2
425
6.1
L.M
87
6.2
Supply & install floor European ceramic tiles (30300.8) cm size, according to
specification and engineer's instructions.
M2
715
6.3
Supply & install wall European ceramic tiles (20200.6) cm or any approved size for
W.C, according to specification and engineer's instructions .
Total Bill No.6 (Carried to Summary)
M2
205
Supply and paint one prime coat and minimum two coats of super cryle for the internal
walls, roofs and columns, soffits, roof, and drop beams according to specifications and
engineer's instructions
M2
670
7.2
Supply and paint one primer and minimum two coats of emulsion paint (Poliside) for
roofs, ceiling and drop beams as per specifications, drawings & the engineer's
instructions.
M2
790
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Supply and fix Stainless steel double bowl sink size 50 cm x 80 cm (Foster Type) or
equivalent. Complete with all water supply pipes 16 mm type Goulany (PE) to the D.B ,
8.2 waste fittings, plug and chain, swan water mixer top quality (Hamat jack type or
Unit
equivalent),soap holder, steel brackets supports, and 2'' drainage line to floor trap
according to drawings, specifications, and engineer's instructions.
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
L.M
20
No.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.5 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and
No.
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivalent with all required electrical and plumping work and material like valves, air
8.6
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions..
No.
Supply and install local marble water distribution board size (80x80cm) complete with
aluminum cover, main headers, air release valves, all necessary fitting , all needed
8.7 Goulany (PE) pipes16mm (hot and cold )from the board to the required point, and
Unit
Goulany (PE) pipes 20mm from water source to the distribution board complete with
all required fitting.
8.3 concrete protection cover, and include drilling into the floors and slabs if needed
8.8
Supply and install all required parts for maintenance for all existing internal and
external UPVC pipes in any diameter .
Total Bill No.8 (Carried to Summary)
L.S
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items
in this Bill such as cutting into the walls and ceiling then repairing.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
57
9.2
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
No.
10
No.
10
No.
10
No.
9.6
Supply, install, connect and test lighting fixture including lamp,wires, conduits, j. boxes
No.
and fixing screws (Type star code Mx586-y83(y/blue) or equivelent
16
9.7
Supply ,installand test lighting point for false ceiling the work including wires,
conduits, j. boxes and all necessary accessories.
No.
40
No.
14
No.
14
9.10 Ditto as item 9.8, but one way, two pole switch.(Type is Gewiss or equivalent).
No.
13
No.
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
14
No.
39
9.14 Ditto as item 9.13, but water proof (Type is Gewiss or equivalent)
No.
No.
41
9.16 Supply and install single phase isolating switch 25A Moller type or equivelent
No.
17
No.
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.5 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
9.17
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
No.
24
No.
44
No.
No.
No.
10
No.
24
No.
equivalent).
Section 4 : Fire Alarm System
Supply, install and commissioning fire alarm system as per drawings including fire
resist PVC pipes, pull boxes special wires which includes :
Supply, install and commission loization smoke detector, the detectors shall be twin9.23 chamber with latching electronic circuitry, two wire connection.(Type is TELEFIRE or
equavilent).
9.24 Ditto, but heat detector.
9.25
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.26
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
LS
9.27 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
Supply and install 5x10mm2 N2xy cable including all accessories for connection from
MDB to SDB
LM
70
9.30
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
L.M
80
L.M
80
Section 6:
9.32 Sub-Distribution Boards (DBB1 )
a.
No.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
13
d.
No.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
9.33 Sub-Distribution Boards (DBB2)
Supply, install sub-distribution board consists of lockable board frames as per
specifications including 2m Galv. steel sheets with anti-static paint, bus bars for
a. incoming cables, neutral and earthing terminal with all necessary accessories and
No.
material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
e.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
21
d.
No.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
9.34 Sub-Distribution Boards (DBB3)
Supply, install sub-distribution board consists of lockable board frames as per
specifications including 2m Galv. steel sheets with anti-static paint, bus bars for
a. incoming cables, neutral and earthing terminal with all necessary accessories and
No.
material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
e.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
d.
No.
e.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
a.
No.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
11
d.
No.
e.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
f.
No.
No.
No.
c.
No.
d.
No.
12
e.
No.
f.
Suplly and install ameter with ct,s 100/5A including all accessories
No.
g.
No.
b.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 7th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing bathrooms, removing arising disposals, existing
floor and wall tiles and the old sand, site cleaning, repair the cutting edges and joints
1.1 between removed and remaining parts of walls and ceiling, and all needed works and
L.S
materials. The price include transfer all of this material outside the site with coordinate
with PRCS staff.
Total Bill No.1 (Carried to Summary)
M3
M2
535
M2
30
Supply and built hollow cement blocks type 402010 cm with compressive strength 35
kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
elements, according to specification and the engineer's instructions
3.2 Ditto but type 402020 cm.
Total Bill No.3 (Carried to Summary)
3.1
Amount
US$
4.1
Maintenance works for doors including supply and install Wally switch lock, oil
painting, and supply and install the damaged parts including frames according to
drawings, specifications, and the engineer's instructions.
Supply and install internal wooden doors size (80220) cm. class (A) . 90mm thick.
decorative in grooved door complete, cover mould, architrave, ironmongery, hardware,
4.2
approved switch lock wally type or equivalent , and Lazor painting for the frame with
the door according to drawings, specifications, and the engineer's instructions.
No.
No.
Supply and install internal wooden doors size (90220) cm. class (A) . 90mm thick
complete, cover mould, architrave, ironmonger, hardware, approved switch lock, and oil
4.3
painting for the frame with the door according to drawings, specifications, and the
engineer's instructions.
No.
11
4.4
No.
4.5
No.
Supply and install two leaves slide colored Aluminum door (Greece system) with 6mm
4.6 clear colored glass size (240x220 cm) including all accessories, decorative hands , and
frame according to drawings, specifications and engineer's instructions.
No.
10
Supply and installing colored Aluminum sliding window (7000) three rails system
including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
M2
27
Unit
4.7
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
4.8
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
All works must be according to specification and engineer instructions. Rates shall
include :
1- Supply of all needed materials, including galvanized angles for the
corners as well as the use of galvanized wire mesh between concrete and
block work.
2- Preparation works by covering all conduits of electricity, water supplies
,between existing walls and slabs etc, with a galvanized wire mesh at
least 20cm width coated by mortar (1:1) cement : sand and the work
includes removal of wires and nails and cleaning of surfaces to be ready for
plastering .This should be done prior to commencement of plastering and
after obtaining a written approval from the supervision engineer.
3- Contractor shall take into consideration that all direct and indirect
works and expenses required for the completion of the coming items are
included in the unit price.
4- Curing with water for at least three days for each coat.
5- Price of plastering shall include all required materials and works,
mixing, scaffolds, cleaning the site, required equipment and workmanship to
complete the work according to specifications and directions of the engineer.
Supply and make internal plastering for internal walls ,soffits, roofs, columns, beams,
and exist damaged areas. The work includes rough primer nail rendering to form a key
with (mix 1 : 1) cement : sand, second layer 13mm: Base-Coat "Rendering" with(1 : 3 :
5.1 0.25) cement : sand mortar: lime and third layer: Finishing Coat with (1 : 4 : 0.50)
cement : sand mortar : lime. Works include all materials needed to finish the works
according to specifications , drawings and supervisor engineer's instructions.
M2
925
L.M
31
M2
680
6.1
All works must be according to drawings, specification and engineer instructions. Rates
shall include :
1- Samples for approval and all the required tests.
2- Cleaning, mechanical polishing and pointing using grout.
3- Insulation works under ceramic floor tiles for upstairs bath rooms and
kitchens using approved primer coat, and approved two hot bitumen coats
(75/25)
4- Plastic angle beads for ceramic wall tiles and Aluminum angle for
5- Local marble Grade A(khalili), free from cracks and holes,
homogeneous in color shall be used
6- Measuring the stockpiled quantities of tiles and obtaining the engineer
approval prior to shipment to the site.
7- Transporting and carefully handling the stored quantities to the site.
8- Price of tiling works shall include supply of all materials, mixing the
cement paste, cutting the tiles to the required shapes and dimensions,
cleaning the site ,required equipment & workmanship to complete the work
according to specifications and directions of the engineer.
9- Imported European or equivalent- glazed ceramic tiles (floor and wall)
of Grade A shall be used.
10- White cement shall be used for Granite tiling.
11- Color of Granite shall be as directed and approved by the Engineer.
12- The works shall be executed according to, specifications and as required
and directed by the Engineer.
13- Skirt of the same types of used tiles with 7cm high.
14- The price should include all required tests for used materials based on
specification and supervisor engineer instructions.
Supply & install local marble (Khalily) 3cm thick for windows or sills with minimum
width 25cm according to specifications and engineer's instructions.
(All works includes removal of existing Local marble and to submit the removed items
to the engineer and to transport it to approved place ).
Supply & install floor European ceramic tiles (30300.8) cm size, according to
6.2 specification and engineer's instructions.
Total Bill No.6 (Carried to Summary)
M2
320
M2
600
M2
830
M2
160
Mechanical Works
Description
Supply and fix shower mixer top quality Hamat jack type or equivalent, complete with
all water supply pipes, waste fittings, plug and chain, , soap holder, supports, and 2''
8.3 drainage line to floor trap according to specifications, and engineer's instructions.
L.S
Unit
13
Unit
13
(The work include the dismantling and reinstallation of the bathtub to solve any drainage
problems)
Supply, fix and connect 4 internal diameter UPVC pipe including fixing in the wall
,B250 concrete protection cover.
8.4
L.M
(The work include any required fitting, remove the damaged pipe, and restore walls and
floors to the previous conditions).
Inspect, supply, and install all required fittings and accessories for maintenance floor
trap with all necessary fitting and restore the floor to the previous situation . including
8.5
No.
heavy duty brass grating and 2" and 4" diam. UPVC drainage pipe to the nearest
manhole according to specifications, and engineer's instructions.
Inspect, Supply and fix white glazed fireclay European W.C. (VITRA type), or
equivalent complete with plastic flushing cistern, heavy duty seat cover and fixed
chromium plated tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings,
8.6 paper holder and flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the
No.
nearest manhole according to specifications, and engineer's instructions.
(The work include supply all missing parts ,and restore walls and floors to the previous
conditions).
Supply and install approved trade mark electric water heater size 50 liter Areston or
equivilent with all required electrical and plumping work and material like valves, air
8.7
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions..
40
26
13
No.
13
8.8
Supply and install all required fittings and accessories for maintenance for all existing
internal and external (UPVC) pipes in any diameter.
L.S
8.9
Supply and install all required pipes and fittings for drip drainage for the split unit A/C
including cutting and reinstatement of the walls and connection to the nearest floor tap.
No.
14
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items in
this Bill such as cutting into the walls and ceiling then repairing.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings, specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
9.2
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
No.
9.3
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
is GA'ASH No. 552100 or equivalent)
No.
25
9.4
Ditto as item 9.3, but with 2X26W PL lamp (Type is GA'ASH or equivalent)
No.
42
9.5
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
No.
9.6
Supply, install, connect and test night light IVY with 8W PL lamp,wires, conduits, j.
boxes and fixing screws for wall mounted
No.
20
9.7
Supply ,installand test lighting point for false ceiling the work including wires, conduits,
No.
j. boxes and all necessary accessories.
40
No.
13
No.
13
9.10 Ditto as item 9.9, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
13
No.
14
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
35
No.
35
9.14 Ditto as item 9.13 but water proof (Type is Gewiss or equivalent)
No.
16
No.
13
No.
No.
No.
10
9.9
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
supply, install connect and, testing three phase isolating switch 40A, surface mounting,
9.16 complete with PVC conduits, J.boxes, cables, and all necessary accessories. (Type is
Moller or equivalent)
9.17 Ditto as 9.16 but single phase 20A
9.18
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
No.
13
No.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
No.
conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or equivalent).
13
Supply, install and commissioning fire alarm system points as per drawings including
fire resist PVC pipes, pull boxes, special wires and all accessories.
Supply, install and commission loization smoke detector, the detectors shall be twin-
9.23 chamber with latching electronic circuitry, two wire connection.(Type is TELEFIRE or
No.
No.
20
No.
equavilent).
9.24 ditto, but heat detector.
9.25
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.26
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
LS
9.29 Supply and install 5x10mm2 n2xy cable from MDB to secondery distribution boards
L.M
50
L.M 250
9.27 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
9.31
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
L.M
80
L.M
80
Section 6:
9.33 Sub-Distribution Boards (DBB1 )
a.
No.
b.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
17
d.
No.
e.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
f.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
a.
No.
b.
No.
c.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
d.
No.
11
e.
Suplly and install ameter with ct,s 100/5A including all accessories
No.
f.
No.
a.
No.
b.
No.
c.
Miniature Circuit Breaker MCB 3X63A. (Type is MOELLER AZ-3-C63 or equivalent). No.
d.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C40 or equivalent). No.
e.
No.
10
f.
No.
g.
Suplly and install ameter with ct,s 150/5A including all accessories
N0
h.
No.
a.
Supply, install sub-distribution board 12C.B capacity Gewiss type including bus bars for
No.
incoming cables, neutral and earthing terminal with all necessary accessories.
10
b.
Miniature Circuit Breaker MCB 1X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
10
Miniature Circuit Breaker MCB 1X16A. (Type is MOELLER AZ-3-C16 or equivalent). No.
30
Miniature Circuit Breaker MCB 1X10A. (Type is MOELLER AZ-3-C10 or equivalent). No.
10
Ditto but residual current circuit breaker 2X25/0.03A. (Type is MOELLER FAZ B25-2No.
FIM0,03 or equivalent).
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
10
c.
d.
e.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 8th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing bathrooms walls, removing arising disposals,
existing floor and wall tiles and the old sand, site cleaning, repair the cutting edges and
1.1 joints between removed and remaining parts of walls and ceiling, and all needed works
and materials. The price include transfer all of this material outside the site with
coordinate with PRCS staff.
Total Bill No.1 (Carried to Summary)
L.S
M3
Supply and built hollow cement blocks type 402010 cm with compressive strength
35 kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
elements, according to specification and the engineer's instructions
M2
535
3.2
M2
30
Amount
US$
Maintenance works for doors including supply and install Wally switch lock, oil
painting, and supply and install the damaged parts including frames according to
drawings, specifications, and the engineer's instructions.
No.
13
Supply and install internal wooden doors size (90220) cm. class (A) . 90mm thick.
decorative in grooved door complete, cover mould, architrave, ironmongery, hardware,
No.
4.2
approved switch lock wally type or equivalent , and Lazor painting for the frame with
the door according to drawings, specifications, and the engineer's instructions.
Supply and install internal wooden doors size (90220)cm. class (A) . 45mm thick
complete with frame, cover mould, architrave, ironmonger, hardware, Wally switch
4.3
lock, and oil painting according to drawings, specifications, and the engineer's
instructions.
4.4 Ditto but two leaves size (120220) cm.
No.
No.
Supply and install two leaves slide colored Aluminum door (Greece system) with 6mm
4.5 clear colored glass size (240x220 cm) including all accessories, decorative hands , and No.
frame according to drawings, specifications and engineer's instructions.
10
4.6
4.7
Supply and installing colored Aluminum sliding window (7000) three rails system
including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
M2
27
Unit
M2
925
M2
320
7.2
Supply and paint one prime coat and minimum two coats of super cryle for the internal
walls, roofs and columns, soffits, roof, and drop beams according to specifications and
engineer's instructions.
M2
600
7.3
Supply and paint one primer and minimum two coats of emulsion paint (Poliside) for
roofs, ceiling and drop beams as per specifications, drawings & the engineer's
instructions.
M2
830
7.4
Supply and paint the internal walls up to a height of 2.8 m above finishing floor level
two coats of putty, one undercoat primer and two coats of approved oil paint according
to specifications and the engineer's instructions.
M2
160
Mechanical Works
Description
Unit
(The work include the dismantling and reinstallation of the bathtub to solve any
drainage problems)
Supply, fix and connect 4 internal diameter UPVC pipe including fixing in the wall
,B250 concrete protection cover.
8.4
L.M
(The work include any required fitting, remove the damaged pipe, and restore walls and
floors to the previous conditions).
Inspect, supply, and install all required fittings and accessories for maintenance floor
trap with all necessary fitting and restore the floor to the previous situation . including
8.5
No.
heavy duty brass grating and 2" and 4" diam. UPVC drainage pipe to the nearest
manhole according to specifications, and engineer's instructions.
Inspect, Supply and fix white glazed fireclay European W.C. (VITRA type), or
equivalent complete with plastic flushing cistern, heavy duty seat cover and fixed
chromium plated tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings,
8.6 paper holder and flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the
No.
nearest manhole according to specifications, and engineer's instructions.
(The work include supply all missing parts ,and restore walls and floors to the previous
conditions).
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivilent with all required electrical and plumping work and material like valves, air
8.7
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
13
13
40
26
13
No.
13
Supply and install all required fittings and accessories for maintenance for all existing
L.S
internal and external (UPVC) pipes in any diameter.
Supply and install all required pipes and fittings for drip drainage for the split unit A/C
8.9
No.
including cutting and reinstatement of the walls and connection to the nearest floor tap.
Total Bill No.8 (Carried to Summary)
8.8
14
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items
in this Bill.such as cutting into the walls and ceiling then repairing
All installation shall be in accordance with:
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings, specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
No.
9.2
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
No.
No.
25
No.
42
No.
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
9.5 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
9.6
Supply, install, connect and test night light IVY with 8W PL lamp,wires, conduits, j.
boxes and fixing screws for wall mounted
No.
20
9.7
Supply ,installand test lighting point for false ceiling the work including wires,
conduits, j. boxes and all necessary accessories.
No.
40
13
No.
13
9.10 Ditto as item 9.8, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
13
No.
14
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
35
No.
35
9.14 Ditto as item 9.13, but water proof (Type is Gewiss or equivalent)
No.
16
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
13
supply, install connect and, testing three phase isolating switch 40A, surface mounting,
9.16 complete with PVC conduits, J.boxes, cables, and all necessary accessories. (Type is
No.
Moller or equivalent)
No.
No.
10
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
No.
13
No.
No.
13
No.
No.
20
No.
equivalent).
Supply, install sub-telephone and computer rack points with all connection cables from
9.20 socket outlet to rack and from rack to telephone and data central as per drawings and
engineers instructions.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
9.21 conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or
equivalent).
Section 4 : Fire Alarm System
Supply, install and commissioning fire alarm system as per drawings including fire
resist PVC pipes, pull boxes special wires which includes :
9.22
Fire alarm control panel 16zones complete with batteries and all necessary
accessories.(Type is TELEFIRE ADR-4000 or equavilent).
Supply, install and commission loization smoke detector, the detectors shall be twin-
9.23 chamber with latching electronic circuitry, two wire connection.(Type is TELEFIRE or
equavilent).
9.24 ditto, but heat detector.
9.25
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.26
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
LS
9.29 Supply and install 5x10mm2 n2xy cable from MDB to secondery distribution boards
L.M
50
L.M 250
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
9.31
power cables including supports and all accessories
L.M
80
L.M
80
9.27 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
Section 6:
9.33 Sub-Distribution Boards (DBB1 )
Supply, install sub-distribution board consists of lockable board frames as per
specifications including 2m Galv. steel sheets with anti-static paint, bus bars for
a. incoming cables, neutral and earthing terminal with all necessary accessories and
material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
No.
b.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
c.
No.
17
d.
No.
e.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4No.
FIM0,03 or equivalent).
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
9.34 Sub-Distribution Boards (DBB2)
Supply, install sub-distribution board consists of lockable board frames as per
specifications and drawings including 2m Galv. steel sheets with anti-static paint, bus
a. bars for incoming cables, neutral and earthing terminal with all necessary accessories
No.
and material to hand over clean and tested ad in operating conditions, 25% empty spare
area.(Type is TAHMASH or equivalent).
f.
b.
No.
c.
Miniature Circuit Breaker MCB 3X32A. (Type is MOELLER AZ-3-C32 or equivalent). No.
d.
No.
11
e.
Suplly and install ameter with ct,s 100/5A including all accessories
N0
f.
No.
a.
No.
b.
No.
c.
Miniature Circuit Breaker MCB 3X63A. (Type is MOELLER AZ-3-C63 or equivalent). No.
d.
Miniature Circuit Breaker MCB 3X40A. (Type is MOELLER AZ-3-C40 or equivalent). No.
e.
No.
10
f.
No.
g.
Suplly and install ameter with ct,s 150/5A including all accessories
N0
h.
No.
Supply, install sub-distribution board 12C.B capacity Gewiss type including bus bars
for incoming cables, neutral and earthing terminal with all necessary accessories
No.
10
b.
Miniature Circuit Breaker MCB 1X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
10
c.
Miniature Circuit Breaker MCB 1X16A. (Type is MOELLER AZ-3-C16 or equivalent). No.
30
d.
Miniature Circuit Breaker MCB 1X10A. (Type is MOELLER AZ-3-C10 or equivalent). No.
10
Ditto but residual current circuit breaker 2X25/0.03A. (Type is MOELLER FAZ B25-2No.
FIM0,03 or equivalent).
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
10
e.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 9th floor
Civil Works
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Unit
L.S
M3
M2
535
3.2
M2
30
2.1
Supply and cast B250 reinforced concrete for lintels and sills in block work, and small
concrete elements and architectural works, according to the engineers instructions with
minimum reinforcement 210 mm for 10cm brick walls, and 412mm for 20cm brick
walls and 6mm /20cm stirrups for both.
Total Bill No.2 (Carried to Summary)
US$
No.
13
No.
Supply and install internal wooden doors size (90220)cm. class (A) . 45mm thick
complete with frame, cover mould, architrave, ironmonger, hardware, Wally switch
lock, and oil painting according to drawings, specifications, and the engineer's
4.3 instructions.
No.
4.4
No.
Supply and install two leaves slide colored Aluminum door (Greece system) with 6mm
clear colored glass size (240x220 cm) including all accessories, decorative hands , and
frame according to drawings, specifications and engineer's instructions.
No.
10
M2
27
Unit
4.2
4.5
Supply and install internal wooden doors size (90220) cm. class (A) . 90mm thick.
decorative in grooved door complete, cover mould, architrave, ironmongery, hardware,
approved switch lock wally type or equivalent , and Lazor painting for the frame with
the door according to drawings, specifications, and the engineer's instructions.
Supply and installing colored Aluminum sliding window (7000) three rails system
including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
4.6 according to drawings, specifications and engineer's instructions.
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
4.7 to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
M2
925
L.M
31
6.1
6.2
Supply & install Floor European ceramic tiles (30300.8) cm size, according to
specification and engineer's instructions.
M2
680
6.3
Supply & install porcelain tiles (40400.8) cm size, according to specification and
engineer's instructions.
Total Bill No.6 (Carried to Summary)
M2
180
7.1
7.2
7.3
7.4
M2
320
M2
600
M2
830
M2
160
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Unit
Test the existing steel pipes networks and repair all damages and any leaks, the work
include restore wall or floor tiles to its previous conditions.
Inspect, Supply and install all required fittings and accessories for maintenance for
existing white glazed fireclay hand wash basin. Including with all water supply pipes ,
waste fittings, plug and chain, water mixer top quality Hamat type or equivalent , soap
8.2 holder, steel brackets supports, and 2'' drainage line to floor trap according to
specifications, and engineer's instructions.
(The work include supply all missing parts ,and restore walls and floors to the previous
conditions).
Supply and fix shower mixer top quality Hamat Jack type or equivalent, complete with
all water supply pipes, waste fittings, plug and chain, , soap holder, supports, and 2''
drainage line to floor trap according to specifications, and engineer's instructions.
8.3
L.S
Unit
13
Unit
13
(The work include the dismantling and reinstallation of the bathtub to solve any drainage
problems)
Supply, fix and connect 4 internal diameter UPVC pipe including fixing in the wall
,B250 concrete protection cover.
8.4
L.M
(The work include any required fitting, remove the damaged pipe, and restore walls and
floors to the previous conditions).
Inspect, supply, and install all required fittings and accessories for maintenance floor
trap with all necessary fitting and restore the floor to the previous situation . including
8.5
No.
heavy duty brass grating and 2" and 4" diam. UPVC drainage pipe to the nearest
manhole according to specifications, and engineer's instructions.
Inspect, Supply and fix white glazed fireclay European W.C. (VITRA type), or
equivalent complete with plastic flushing cistern, heavy duty seat cover and fixed
chromium plated tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings,
8.6 paper holder and flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the
nearest manhole according to specifications, and engineer's instructions.
(The work include supply all missing parts ,and restore walls and floors to the previous
conditions).
40
26
No.
13
8.7
Supply and install approved trade mark electric water heater size 50 liter ARISTON or
equivilent with all required electrical and plumping work and material like valves, air
release valve, PE pipes to the nearest D.B, electrical switch and connection to the
distribution panel, according to specifications, and engineer's instructions.
No.
13
8.8
Supply and install all required fittings and accessories for maintenance for all existing
internal and external (UPVC) pipes in any diameter.
L.S
8.9
Supply and install all required pipes and fittings for drip drainage for the split unit A/C
including cutting and reinstatement of the walls and connection to the nearest floor tap.
Total Bill No.8 (Carried to Summary)
No.
14
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Unit
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items in
this Bill such as cutting into the walls and ceiling then repairing.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
is GA'ASH No. 552100 or equivalent)
9.4 Ditto as item 9.3, but with 2X26W PL lamp (Type is GA'ASH or equivalent)
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
9.5 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
Supply, install, connect and test night light IVY with 8W PL lamp,wires, conduits, j.
9.6
boxes and fixing screws for wall mounted
Supply ,installand test lighting point for false ceiling the work including wires,
9.7
conduits, j. boxes and all necessary accessories.
Section 2: Switches & sockets:
9.2
No.
No.
No.
25
No.
42
No.
No.
20
No.
40
9.8
Supply, install connect and test single pole one way switch, 220v, 13A, complete with
PVC conduits, J.boxes, wiring,cover and all necessary accessories. (Type is Gewiss or
equivalent).
No.
13
9.9
No.
13
9.10 Ditto as item 9.8, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
13
No.
14
9.12 Ditto as item 9.8, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
35
No.
35
9.14 Ditto as item 9.13, but water proof (Type is Gewiss or equivalent)
No.
16
No.
13
No.
No.
No.
10
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.13 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
supply, install connect and, testing three phase isolating switch 40A, surface mounting,
9.16 complete with PVC conduits, J.boxes, cables, and all necessary accessories. (Type is
Moller or equivalent)
9.17 Ditto as 9.16 but single phase 20A
9.18
supply, install connect and, heater switch with indicator lamp, complete with PVC
conduits, J.boxes, cables, and all necessary accessories. (Type is Gewiss or equivalent)
Amount
US$
13
No.
Supply, install sattelite socket outlet for surface/flush mounting, complete with PVC
No.
conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or equivalent).
13
9.19 PVC conduits, J.boxes, cables, and all necessary accessories. (Type is GEWISS or
equivalent).
Supply, install sub-telephone and computer rack points with all connection cables from
9.20 socket outlet to rack and from rack to telephone and data central as per drawings and
engineers instructions.
9.21
No.
20
No.
equavilent).
9.23 ditto, but heat detector.
9.24
Supply, install break glass call point as per drawings the unit shall be standard type for
interior use with key operated test facility, with plastic coated glass.
No.
9.25
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
LS
9.28 Supply and install 5x10mm2 n2xy cable from MDB to secondery distribution boards
L.M
50
L.M
250
L.M
80
L.M
80
a.
No.
b.
No.
c.
No.
17
d.
No.
e.
Ditto but residual current circuit breaker 4X40/0.03A. (Type is MOELLER FAZ B40-4FIM0,03 or equivalent).
No.
f.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4FIM0,03 or equivalent).
No.
9.26 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
9.30
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
Section 6:
9.32 Sub-Distribution Boards (DBB1 )
a.
No.
b.
No.
c.
No.
d.
No.
11
e.
Suplly and install ameter with ct,s 100/5A including all accessories
No.
f.
No.
a.
No.
b.
No.
c.
No.
d.
No.
10
e.
No.
f.
Suplly and install ameter with ct,s 150/5A including all accessories
No.
g.
No.
a.
Supply, install sub-distribution board 12C.B capacity Gewiss type including bus bars for
No.
incoming cables, neutral and earthing terminal with all necessary accessories
10
b.
No.
10
c.
No.
30
d.
No.
10
Ditto but residual current circuit breaker 2X25/0.03A. (Type is MOELLER FAZ B25-2No.
FIM0,03 or equivalent).
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
10
e.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 10th floor
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Demolishing and dismantling of existing walls, plastering ,concrete and steel columns,
concrete and steel beams ,any concrete or steel elements ,removing arising disposals,
existing floor and wall tiles and the old sand, site cleaning, repair the cutting edges and
joints between removed and remaining parts of walls and ceiling, and all needed works
and materials. The price include transfer all of this material outside the site with
1.1 coordinate with PRCS staff.
Total Bill No.1 (Carried to Summary)
L.S
M3
M3
M2
120
Supply and cast B300 reinforced concrete for columns , according to the engineers
instructions with minimum reinforcement 1% of gross section and and 8mm /20cm
stirrups.
Total Bill No.2 (Carried to Summary)
Supply and built hollow cement blocks type 402010 cm with compressive strength
35 kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
3.1
elements, the work and cost include cutting the porcelain tiles under the walls and
applying a proper material as a grout material to fill the space between the blocks and
the cut tiles according to specification and the engineer's instructions.
3.2
M2 210
Amount
US$
4.2
Supply and install internal Aluminum doors size (80220)cm.(4500) system complete with
glass 4 mm. thick., fiberglass 4 mm. thick., with all required sealants, locks, ironmongeries
according to, specifications and engineer's instructions.
Supply and install two leaves slide colored Aluminum door (Greece system) with 6mm
clear colored glass size (160x220 cm) including all accessories, decorative hands , and
frame according to drawings, specifications and engineer's instructions.
No.
No.
No.
Supply and install internal wooden doors size (90220) cm.) 45mm thick complete
with frame, cover mould, architrave, ironmonger, hardware, Wally switch lock, and oil
painting according to drawings, specifications, and the engineer's instructions.
4.3
(The work include supply and install, paint with antibacterial paint where required, and
fixing two stainless steel kick plates 0.6mm thick. 20cm at bottom and 40cm at middle
at the both sides according to drawing, specifications and engineer instructions).
4.4
No.
4.5
Supply and installing colored Aluminum sliding window (7000) three rails system
including the fixed part and all accessories, with 4mm clear glass, and metal fly screen
according to drawings, specifications and engineer's instructions.
M2
41
Supply and install colored Aluminum (4500) for W.C (60x60) cm with Jack according
Unit
to drawings, specifications and engineer instructions.
Total Bill No.4 (Carried to Summary)
4.6
M2
530
Supply & install porcelain tiles (40400.8) cm size, according to specification and
engineer's instructions.
L.M
130
M2
50
M2
182
M2
180
Supply and install clay roofing tiles (bricks) of red color Class (A), size 2242 cm, 3 kg all
according to the drawings, specification and engineer's instructions. The wood must be treated
with anti rot paint. The item includes the following works:
6.5
M2
577
M2 1,396
Mechanical Works
Bill No. 8 (Mechanical Works)
Item
No.
Description
Supply and fix Stainless steel double bowl sink size 50 cm x 80 cm (Foster Type) or
equivalent. Complete with all water supply pipes 16 mm type Goulany (PE) to the D.B,
8.2 waste fittings, plug and chain, swan water mixer top quality (Hamat Jack type or Unit
equivalent),soap holder, steel brackets supports, and 2'' drainage line to floor trap
according to drawings, specifications, and engineer's instructions.
Supply, fix and connect 4 internal diameter PVC including fixing in the wall ,B250
8.3 concrete protection cover, and include drilling into the floors and slabs if needed L.M
according to specifications, and engineer's instructions.
20
Supply, and install floor trap with all necessary fitting, including heavy duty brass
grating and 2" and 4" diam. UPVC drainage pipe to the nearest manhole or to the
8.4
No.
nearest vertical sewage header in the typical floors according to specifications, and
engineer's instructions.
Supply and fix white glazed fireclay European W.C. (VITRA type), or equivalent
complete with plastic flushing cistern, heavy duty seat cover and fixed chromium plated
8.5 tap 1\2'', Supply pipes 16mm GOULANY (PE) to the D.B, fittings, paper holder and No.
flushing pipe hose, angle valves, 4" diam. PVC drainage pipe to the nearest manhole
according to specifications, and engineer's instructions.
Supply and install approved trade mark electric water heater size 50 liter ARESTON or
equivalent with all required electrical and plumping work and material like valves, air
8.6 release valve, PE pipes to the nearest D.B, electrical switch and connection to the No.
distribution panel, according to specifications, and engineer's instructions.
Supply and install local marble water distribution board size (80x80cm) complete with
aluminum cover, main headers, air release valves ,all necessary fitting , all needed
8.7 Goulany (PE) pipes16mm (hot and cold )from the board to the required point, and Unit
Goulany (PE) pipes 20mm from water source to the distribution board complete with all
required fitting.
Total Bill No.8 (Carried to Summary)
Amount
US$
Electrical Works
Bill No. 9 (Electrical works)
Item
No.
Description
Supplying, installing, testing and commission of the electrical works as per drawings,
specifications, and engineer's instructions. The prices of the follwing items include all
necessary junction boxes, wires, conduits, clamps, bolts, connectors and connecting all
new and existing cables to switch boards.all electrical devices will be installed in
existing concrete ceiling The price includes all required Rinforced cement to all items
in this Bill.
All installation shall be in accordance with :
* The drawings , specifications and instructions and demands of the engineer.
* The electricity law and electrical code requirments of the BRITISH standards.
The contractor should refer to the drawings , specifications and other Contract
Documents .
The prices will be deemed to include for the full cost as described in all Documents.
Section 1: Lighting Fittings, all ceiling mounted lighting fixture will be installed in existing ceiling
9.1
Supply, install, connect and test ceiling mounted fluorescent lighting fixture 2x36w
complete with lighting tubes 36, chock, condensers, starters rigid PVC conduits,
J.boxes, fixing screws (Galv.) and wiring. (Type is GA'ASH No. 50540 or equivalent)
Ditto as item 9.1, but water and dust proof IP65. (Type is GA'ASH No. 52940 or
equivalent)
Supply, install, connect and test ceiling mounted incandescence W.P lighting fixture
9.3 with 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type
is GA'ASH No. 552100 or equivalent)
Supply, install, connect and test incandescence W.P wall mounted lighting fixture with
9.4 75W lamp, wires, conduits, j. boxes and fixing screws for ceiling mounted. (Type is
GA'ASH or equivalent)
Supply ,installand test lighting point for false ceiling the work including wires,
9.5
conduits, j. boxes and all necessary accessories.
Section 2: Switches & sockets:
Supply, install connect and test single pole one way switch, 220v, 13A, complete with
9.6 PVC conduits, J.boxes, wiring,cover and all necessary accessories. (Type is Gewiss or
equivalent).
9.2
No.
19
No.
No.
14
No.
20
No.
41
No.
9.7
No.
9.8
Ditto as item 9.6, but one way, two pole switch.(Type is LEGRAND or equivalent).
No.
11
9.9
Ditto as item 9.6, but two way switch, one pole.(Type is Gewiss or equivalent).
No.
16
No.
30
9.11 Ditto as item 9.10, but water proof (Type is Gewiss or equivalent)
No.
No.
No.
No.
Ceiling mounted loud speaker 150 mm Diam. with nominal max. power of 4/6W
including all required cables , junction boxes conduits and, metal front protection
9.15
mesh, clips for quick attachment , line transformer all necessary accessories (Type is
RCF , PHILIPS or equivalent)
No.
Microphone desk stand including dynamic microphone with high level of sensitivity,
Pushbuttons for momentary and latching microphone actions, 5-meter cable for
9.16
amplifier connection with 5-pin DIN connector (Type is RCF , PHILIPS 6 ZONE LBB
1925/00 or equivalent)
No.
No.
supply, install connect and, testing single socket outlet 16A, 220v, 2p+E for flush or
9.10 surface mounting, complete with PVC conduits, J.boxes, wiring, and all necessary
9.17
Amount
US$
No.
13
No.
Supply, install break glass call point as per drawings the unit shall be standard type for
9.20
interior use with key operated test facility, with plastic coated glass.
No.
Supply, install 95 db electronic horn ultra sound for indoor and outdoor used. (Type is
TELEFIRE or equavilent).
No.
No.
9.21
9.22 Supply, install flash beacon (above entrances). (Type is TELEFIRE or equavilent).
Supply and install cable tray system with galvanized steel 5X20 cm cable trays for
power cables including supports and all accessories
L.M 100
L.M
80
L.M
80
Section 6:
9.26 Sub-Distribution Boards (DBB1 )
a.
No.
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
11
d.
No.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4e.
No.
FIM0,03 or equivalent).
9.27 Sub-Distribution Boards (DBB2)
Supply, install sub-distribution board consists of lockable board frames as per
specifications including 2m Galv. steel sheets with anti-static paint, bus bars for
a. incoming cables, neutral and earthing terminal with all necessary accessories and
No.
material to hand over clean and tested ad in operating conditions, 30% empty spare
area.(Type is Moller or equivalent).
b.
Miniature Circuit Breaker MCB 3X25A. (Type is MOELLER AZ-3-C25 or equivalent). No.
c.
No.
d.
No.
Ditto but residual current circuit breaker 4X25/0.03A. (Type is MOELLER FAZ B25-4No.
FIM0,03 or equivalent).
Total Bill No.9 (Carried to Summary)
Note: All relevant specifications requirements, drawings, and details are to be taken into account.
e.
Site Works
Concrete Work
Masonary Work
Doors and Windows
Plastering Work
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Electrical works
Total of 11th floor
Bill of Quantities(Stair)
Palestinian Red Crescent Society (PRCS)
Rehabilitation of PRCS Psycho-Social, Cultural and Hospital Center in Gaza
Stair Case
Bill No. 1 ( Site Works)
Item
No.
Description
The contractor shall provide, erect and maintain all safety measures requirements
according to specification, including protecting the scaffolding with special cloth or
fabric, and work plan for all items should be submitted before starting any activity.
Removing arising disposals site cleaning, Rubble resulting from the fire which happened
in the building and removing the damaged steps and site arrangement to the satisfaction
of the site engineer after completion of work.The item includes cleaning, polishing, and L.S
maintaining the defected stair marble. The work according to specifications and
1.1 engineer's instructions.
Total Bill No.1 (Carried to Summary)
Maintenance works for stair case aluminum windows including all required works and
materials as drawings and engineer's instructions, including replacing the damaged
parts, replacing accessories and fly screen, refixing the loose part, .ect.
Unit
66
2.2
Supply install and replace the wooden damaged parts of the handrail, according to
specifications and engineer's instructions, including varnish and lacker paiting.
L.M
150
Amount
US$
Step 100
Unit 400
M2 1325
L.M 150
Mechanical Works
Description
8
50
Amount
US$
Site Works
Doors and Windows
Tiles and Terrazo Work
Painting Work
Mechanicalworks
Total of Staircase
Bill of Quantities(Elevations)
Palestinian Red Crescent Society (PRCS)
Rehabilitation of PRCS Psycho-Social, Cultural and Hospital Center in Gaza
Civil Works (Elevations)
Bill No. 1 ( Concrete Works)
Item
No.
Description
The following items include supply and cast of concrete, shuttering, tie rods, spacers,
supply and placing of concrete, vibrating, steel reinforcement shaping and fixing,
curing, steel reinforcement, and supply and cast the required concrete, using
mechanical vibrators, curing, testing steel reinforcement and concrete, two coats of
water proof hot bitumen layers for foundations, concrete walls, necks and ground beams
and all underground elements, and all other requirements and workmanship as per
specifications, drawings and engineers instructions.
The contractor has to submit shop drawings for approval prior to work.
Supply and cast B250 reinforced concrete for lintels and sills in block work, and small
concrete elements and architectural works, according to the engineers instructions with
minimum reinforcement 210 mm for 10cm brick walls, and 412mm for 20cm brick
1.1 walls and 6mm /20cm stirrups for both.
Total Bill No.1 (Carried to Summary)
M3
Supply and built hollow cement blocks type 402020 cm with compressive strength 35 M2
690
kg/cm2 with all requirements for walls and to jointing by anchorage dowel with R.C
elements, according to specification and the engineer's instructions.
Total Bill No.2 (Carried to Summary)
Amount
US$
3.2
Supply and installing colored Aluminum sliding window (7000) with 3 rails system,
including all accessories, with 4mm clear glass, and metal fly screen according to
drawings, specifications and engineer's instructions.
Repairing of the existing Alum. including replacing the damaged parts, replacing
accessories and fly screen, refixing the loose part, .ect.
Total Bill No.3 (Carried to Summary)
M2
170
M2
100
Supply and install Italian finish plastering and all is according to specifications ,
drawings and supervisor engineer's instructions.
M2
400
4.3
M2
750
4.4
Supply and install two coats of external quality Supercryle colored paint over one coat
of primer.
Total Bill No.4 (Carried to Summary)
M2 3300
5.1
5.2
14- The price should include all required tests for used materials based on
specification and supervisor engineer instructions.
Supply & install local marble (Khalily) 3cm thick for windows or sills with minimum
width 25cm according to specifications and engineer's instructions.
(All works includes removal of existing Local marble and to submit the removed items
to the engineer and to transport it to approved place ).
Supply and replace local marble stair treads including removing the damaged steps,
mortar, grouting and polishing (optional item )
Total Bill No.5 (Carried to Summary)
L.M
160
Unit
30
Description
All work are performed in accordance with the plans and technical
specifications of the project and as approved by the Supervisor Engineer.
*- Maintenance and operation and checking passenger electrical lift; load (8
persons).
*- All it takes to complete the work according to drawings; and specifications
and instructions of the supervising engineer.
*- Removing, cleaning and checking all the components of the existing elevator and
deliver all the pieces to the Red Crescent stores and paint the Hoist way (white paint)
after cleaning.
*- Cleaning the cabin and exterior doors and door frames with special material to clean
the stainless steel.
6.1 *- maintenance (tighten; calibration, cleaning and lubrication) the main guides and back L.S
guides.
*- Unpack all (Door Systems) and maintain them (cleaning the lubrication of grease)
and re-installed.
*- compile and operation and checking the lift and ready for the work.
L.S
Supply and installation complete door frame and two (door wings) with all component
6.2 to install size (80 200 cm) and opens sliding on one side, so that it is manufactured
according to international standards and is Specially to passenger lifts.
No.
Supply, installation and operation (door system) size (80 cm) , opens sliding on one
6.3 side, so that should be European manufacture and manufactured according to
international standards and is Specially for passenger lifts.
No.
6.4 Supply and installation of (traction rope) (13 mm) to drag the cabin.
L.M 240
L.M 240
6.6
Supply and installation wide cable (24 lines) between the cabin and the operation
maintenance panel.
L.M
50
6.7 Supply, installation and operation of the external button good quality.
No.
12
No.
12
L.S
L.S
6.1 Supply and installation protection galvanized steel for all doors.
No.
12
L.S
L.S
No.
No.
6.14 supply, installation and equipping suspension spine for cabin &counter- weight
No.
10
No.
10
6.16 Supply, installation and operation switch for the (hoist way).
No.
No.
6.18 Supply, installation, operation and maintenance box (above the cabin).
No.
No.
6.12
6.19
Supply, installation and operation of the machine (Motor) capacity load (8 passenger)
and not less than (9 KW) and works by Variable Volt Variable Frequency (VVVF).
Supply, installation and operation Main control panel equipped to serve 14 stations and
work as Variable Volt Variable Frequency (VVVF).
Amount
US$
No.
Supply, installation and operation of the cabin ceiling fan and working by internal
button in the cabin.
No.
Supply, installation and operation Operating Panel Board and Equipped with thus
(micro push button for each served- door open button- door close button- fan button6.23 emergency call button- up & down button- direction arrows- digital display position
arrows- inter phone & alarm buzzer system- over load indication signals- out service
indication signal-instruction plate- emergency car light -battery (7.5 amp) - Fire switch.
L.S
L.S
6.24 Supply, installation and operation Photocell cell on the length of the door.
No.
6.25 Supply, installation and inspection Buffers for the cabin and the counter-weight.
No.
6.26 supply, installation and operation high & low speed limit.
No.
10
No.
No.
L.S
L.S
L.S
L.S
6.20 certified company with international standards-based and work as Variable Volt
6.27
6.3
Supply and installation Porcelain tile for cabin floor thickness is not more than (1 cm)
The quality of Deluxe.
Total Bill No.6 (Carried to Summary)
Concrete Works
2
3
4
5
6
Masonary Work
Doors and Windows
Painting Work
Tiles and Marble Work
Maintenance work of Elevator
Total of Elevations
Summery Sheet
Floor
Total USD
3rd floor
4th floor
5th floor
6th floor
7th floor
8th floor
9th floor
10th floor
11th floor
Stair case
Elevation
Grand Total of floors
GRAND TOTAL IN WORDS_________________________________________________________
____________________________________________________________________
SIGNATURE________________________________________________
NAME _____________________________________________________
ATHORIZATION_____________________________________________
COMPANY NAME___________________________________________
ADRESS AND TELEPHONE____________________________________