Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Date: 02/04/2014
EAS 04-0020
HV CABLE BOXES
Network(s):
Summary:
Originator:
Paul Dyer
Date:
02/04/2014
Approved By:
Kevin Burt
Approved Date:
04/04/2014
Review Date:
04/04/2017
This document forms part of the Companys Integrated Business System and its requirements are mandatory throughout UK
Power Networks. Departure from these requirements may only be taken with the written approval of UK Power Networks
Director of Asset Management. If you have any queries about this document please contact the originator of the current issue.
Document History
(The document history notes below are intended as a guide only and may not cover all of the changes. If you wish to make use
of this document it should be read in full.)
Version
Date
Details
Originator
3.0
02/04/2014
Paul Dyer
2.2
28/07/2012
Lee Strachan
2.1
08/09/2011
Jerry Wells
2.0
26/05/2011
Sinad Hogan
1.0
28/09/2010
Original
Sinad Hogan
THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE
Version: 3.0
HV Cable Boxes
Contents
1
Scope ....................................................................................................................... 3
2.1
2.2
2.3
2.4
Drawing ..................................................................................................................... 5
2 of 5
HV Cable Boxes
Scope
UK Power Networks (UKPN) Asset Management has assessed and approved the WebsterWilkinson open back style HV cable box for use on the LPN, EPN and SPN distribution
network.
Approved Equipment
2.1
Manufacturer Details
Contact Name:
Tony Greenfield
Manufacturer:
Webster-Wilkinson
Manufacturer Address:
Webster-Wilkinson Ltd.,
High Voltage Engineering,
Halesfield 10,
Telford,
Shropshire,
TF7 4QP
Telephone Number:
Fax Number:
Email:
sales@webster-wilkinson.com
tony@webster-wilkinson.com
2.2
Equipment Details
National/International Approvals:
Equipment Description:
HV Cable Box
Description:
14261V
C4016-D
3 of 5
HV Cable Boxes
2.3
Plant Particulars
The HV cable box is a dry termination enclosure designed in open back style, suitable for
mounting over the Mekufa HV bushing on ground mounted distribution transformers for use
on the 11kV and 6.6kV LPN, EPN and SPN distribution networks.
The cable box gland plate is supplied with an integral welded tube 88.75mm inside diameter.
The gland plate has a welded-on MS through earth stud.
The box is supplied complete with the flange gasket.
The paint system has been modified to suit all three areas and future cable boxes will be
painted to the Webster Wilkinson C4 paint system suitable for urban, industrial and coastal
areas with moderate salinity with a dark admiralty grey top coat.
Future cable boxes will also be supplied complete with four anti-vandal nuts which were
previously supplied on EPN and SPN cable boxes only.
4 of 5
HV Cable Boxes
2.4
Drawing
5 of 5